summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-at91rm9200/board-eb9200.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-at91rm9200/board-eb9200.c')
-rw-r--r--arch/arm/mach-at91rm9200/board-eb9200.c130
1 files changed, 130 insertions, 0 deletions
diff --git a/arch/arm/mach-at91rm9200/board-eb9200.c b/arch/arm/mach-at91rm9200/board-eb9200.c
new file mode 100644
index 0000000..a3e2df9
--- /dev/null
+++ b/arch/arm/mach-at91rm9200/board-eb9200.c
@@ -0,0 +1,130 @@
+/*
+ * linux/arch/arm/mach-at91rm9200/board-eb9200.c
+ *
+ * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
+ * by Andrew Patrikalakis
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/device.h>
+
+#include <asm/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware.h>
+#include <asm/arch/board.h>
+#include <asm/arch/gpio.h>
+
+#include "generic.h"
+
+static void __init eb9200_init_irq(void)
+{
+ /* Initialize AIC controller */
+ at91rm9200_init_irq(NULL);
+
+ /* Set up the GPIO interrupts */
+ at91_gpio_irq_setup(BGA_GPIO_BANKS);
+}
+
+/*
+ * Serial port configuration.
+ * 0 .. 3 = USART0 .. USART3
+ * 4 = DBGU
+ */
+static struct at91_uart_config __initdata eb9200_uart_config = {
+ .console_tty = 0, /* ttyS0 */
+ .nr_tty = 2,
+ .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
+};
+
+static void __init eb9200_map_io(void)
+{
+ at91rm9200_map_io();
+
+ /* Initialize clocks: 18.432 MHz crystal */
+ at91_clock_init(18432000);
+
+ /* Setup the serial ports and console */
+ at91_init_serial(&eb9200_uart_config);
+}
+
+static struct at91_eth_data __initdata eb9200_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata eb9200_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata eb9200_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+static struct at91_cf_data __initdata eb9200_cf_data = {
+ .det_pin = AT91_PIN_PB0,
+ .rst_pin = AT91_PIN_PC5,
+ // .irq_pin = ... not connected
+ // .vcc_pin = ... always powered
+};
+
+static struct at91_mmc_data __initdata eb9200_mmc_data = {
+ .is_b = 0,
+ .wire4 = 1,
+};
+
+static void __init eb9200_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&eb9200_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&eb9200_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&eb9200_udc_data);
+ /* I2C */
+ at91_add_device_i2c();
+ /* Compact Flash */
+ at91_add_device_cf(&eb9200_cf_data);
+ /* SPI */
+ at91_add_device_spi(NULL, 0);
+ /* MMC */
+ /* only supports 1 or 4 bit interface, not wired through to SPI */
+ at91_add_device_mmc(&eb9200_mmc_data);
+}
+
+MACHINE_START(ATEB9200, "Embest ATEB9200")
+ .phys_io = AT91_BASE_SYS,
+ .io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = eb9200_map_io,
+ .init_irq = eb9200_init_irq,
+ .init_machine = eb9200_board_init,
+MACHINE_END
OpenPOWER on IntegriCloud