diff options
Diffstat (limited to 'arch/arm/boot')
-rw-r--r-- | arch/arm/boot/dts/imx6sx.dtsi | 1202 |
1 files changed, 1202 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi new file mode 100644 index 0000000..ac3866c --- /dev/null +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -0,0 +1,1202 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <dt-bindings/clock/imx6sx-clock.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include "imx6sx-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &fec1; + ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + mmc3 = &usdhc4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + spi4 = &ecspi5; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1075000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6SX_CLK_ARM>, + <&clks IMX6SX_CLK_PLL2_PFD2>, + <&clks IMX6SX_CLK_STEP>, + <&clks IMX6SX_CLK_PLL1_SW>, + <&clks IMX6SX_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + soc-supply = <®_soc>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + }; + + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + clocks = <&clks IMX6SX_CLK_OCRAM>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6SX_CLK_APBH_DMA>; + }; + + gpmi: gpmi-nand@01806000{ + compatible = "fsl,imx6sx-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bch"; + clocks = <&clks IMX6SX_CLK_GPMI_IO>, + <&clks IMX6SX_CLK_GPMI_APB>, + <&clks IMX6SX_CLK_GPMI_BCH>, + <&clks IMX6SX_CLK_GPMI_BCH_APB>, + <&clks IMX6SX_CLK_PER1_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SX_CLK_SPDIF>, + <&clks IMX6SX_CLK_OSC>, + <&clks IMX6SX_CLK_SPDIF>, + <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_IPG>, + <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI1>, + <&clks IMX6SX_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI2>, + <&clks IMX6SX_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI3>, + <&clks IMX6SX_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI4>, + <&clks IMX6SX_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + esai: esai@02024000 { + reg = <0x02024000 0x4000>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ESAI_IPG>, + <&clks IMX6SX_CLK_ESAI_MEM>, + <&clks IMX6SX_CLK_ESAI_EXTAL>, + <&clks IMX6SX_CLK_ESAI_IPG>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "core", "mem", "extal", + "fsys", "dma"; + status = "disabled"; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi"; + reg = <0x02028000 0x4000>; + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SSI1_IPG>, + <&clks IMX6SX_CLK_SSI1>; + clock-names = "ipg", "baud"; + dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ssi2: ssi@0202c000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SSI2_IPG>, + <&clks IMX6SX_CLK_SSI2>; + clock-names = "ipg", "baud"; + dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx21-ssi"; + reg = <0x02030000 0x4000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SSI3_IPG>, + <&clks IMX6SX_CLK_SSI3>; + clock-names = "ipg", "baud"; + dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + asrc: asrc@02034000 { + reg = <0x02034000 0x4000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ASRC_MEM>, + <&clks IMX6SX_CLK_ASRC_IPG>, + <&clks IMX6SX_CLK_SPDIF>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck", "dma"; + dmas = <&sdma 17 20 1>, <&sdma 18 20 1>, + <&sdma 19 20 1>, <&sdma 20 20 1>, + <&sdma 21 20 1>, <&sdma 22 20 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + status = "okay"; + }; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM1>, + <&clks IMX6SX_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM2>, + <&clks IMX6SX_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM3>, + <&clks IMX6SX_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM4>, + <&clks IMX6SX_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + flexcan1: can@02090000 { + compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_CAN1_IPG>, + <&clks IMX6SX_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flexcan2: can@02094000 { + compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_CAN2_IPG>, + <&clks IMX6SX_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt: gpt@02098000 { + compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt"; + reg = <0x02098000 0x4000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_GPT_BUS>, + <&clks IMX6SX_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@020b0000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@020b4000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020b4000 0x4000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DUMMY>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6sx-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2875000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2875000>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "cpu"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pcie: regulator-vddpcie@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpcie"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBPHY1>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBPHY2>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + }; + + src: src@020d8000 { + compatible = "fsl,imx6sx-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6sx-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6sx-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6sx-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SDMA>, + <&clks IMX6SX_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbh: usb@02184400 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6sx-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + }; + + fec1: ethernet@02188000 { + compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ENET>, + <&clks IMX6SX_CLK_ENET_AHB>, + <&clks IMX6SX_CLK_ENET_PTP>, + <&clks IMX6SX_CLK_ENET_REF>, + <&clks IMX6SX_CLK_ENET_PTP>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + status = "disabled"; + }; + + mlb: mlb@0218c000 { + reg = <0x0218c000 0x4000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_MLB>; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USDHC1>, + <&clks IMX6SX_CLK_USDHC1>, + <&clks IMX6SX_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USDHC2>, + <&clks IMX6SX_CLK_USDHC2>, + <&clks IMX6SX_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USDHC3>, + <&clks IMX6SX_CLK_USDHC3>, + <&clks IMX6SX_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: usdhc@0219c000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_USDHC4>, + <&clks IMX6SX_CLK_USDHC4>, + <&clks IMX6SX_CLK_USDHC4>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + fec2: ethernet@021b4000 { + compatible = "fsl,imx6sx-fec"; + reg = <0x021b4000 0x4000>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ENET>, + <&clks IMX6SX_CLK_ENET_AHB>, + <&clks IMX6SX_CLK_ENET_PTP>, + <&clks IMX6SX_CLK_ENET2_REF_125M>, + <&clks IMX6SX_CLK_ENET_PTP>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + status = "disabled"; + }; + + weim: weim@021b8000 { + compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_EIM_SLOW>; + }; + + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + }; + + sai1: sai@021d4000 { + compatible = "fsl,imx6sx-sai"; + reg = <0x021d4000 0x4000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SAI1_IPG>, + <&clks IMX6SX_CLK_SAI1>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 31 23 0>, <&sdma 32 23 0>; + dma-source = <&gpr 0 15 0 16>; + status = "disabled"; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + sai2: sai@021dc000 { + compatible = "fsl,imx6sx-sai"; + reg = <0x021dc000 0x4000>; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_SAI2_IPG>, + <&clks IMX6SX_CLK_SAI2>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 33 23 0>, <&sdma 34 23 0>; + dma-source = <&gpr 0 17 0 18>; + status = "disabled"; + }; + + qspi1: qspi@021e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-qspi"; + reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_QSPI1>, + <&clks IMX6SX_CLK_QSPI1>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + qspi2: qspi@021e4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-qspi"; + reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_QSPI2>, + <&clks IMX6SX_CLK_QSPI2>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_I2C4>; + status = "disabled"; + }; + }; + + aips3: aips-bus@02200000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02200000 0x100000>; + ranges; + + spba-bus@02200000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02240000 0x40000>; + ranges; + + csi1: csi@02214000 { + reg = <0x02214000 0x4000>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_DCIC1>; + clock-names = "disp-axi", "csi_mclk", "dcic"; + status = "disabled"; + }; + + pxp: pxp@02218000 { + reg = <0x02218000 0x4000>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PXP_AXI>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pxp-axi", "disp-axi"; + status = "disabled"; + }; + + csi2: csi@0221c000 { + reg = <0x0221c000 0x4000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_DCIC2>; + clock-names = "disp-axi", "csi_mclk", "dcic"; + status = "disabled"; + }; + + lcdif1: lcdif@02220000 { + reg = <0x02220000 0x4000>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + lcdif2: lcdif@02224000 { + reg = <0x02224000 0x4000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + vadc: vadc@02228000 { + reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; + reg-names = "vadc-vafe", "vadc-vdec"; + clocks = <&clks IMX6SX_CLK_VADC>, + <&clks IMX6SX_CLK_CSI>; + clock-names = "vadc", "csi"; + status = "disabled"; + }; + }; + + adc1: adc@02280000 { + compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; + reg = <0x02280000 0x4000>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "adc"; + status = "disabled"; + }; + + adc2: adc@02284000 { + compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; + reg = <0x02284000 0x4000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "adc"; + status = "disabled"; + }; + + wdog3: wdog@02288000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x02288000 0x4000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + ecspi5: ecspi@0228c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x0228c000 0x4000>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_ECSPI5>, + <&clks IMX6SX_CLK_ECSPI5>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@022a0000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x022a0000 0x4000>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm5: pwm@022a4000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022a4000 0x4000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM5>, + <&clks IMX6SX_CLK_PWM5>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm6: pwm@022a8000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022a8000 0x4000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM6>, + <&clks IMX6SX_CLK_PWM6>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm7: pwm@022ac000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022ac000 0x4000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM7>, + <&clks IMX6SX_CLK_PWM7>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm8: pwm@0022b0000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x0022b0000 0x4000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PWM8>, + <&clks IMX6SX_CLK_PWM8>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + }; + + pcie: pcie@0x08000000 { + compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; + reg = <0x08ffc000 0x4000>; /* DBI */ + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + /* configuration space */ + ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000 + /* downstream I/O */ + 0x81000000 0 0 0x08f80000 0 0x00010000 + /* non-prefetchable memory */ + 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; + num-lanes = <1>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>, + <&clks IMX6SX_CLK_PCIE_AXI>, + <&clks IMX6SX_CLK_LVDS1_OUT>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pcie_ref_125m", "pcie_axi", + "lvds_gate", "display_axi"; + status = "disabled"; + }; + }; +}; |