diff options
Diffstat (limited to 'arch/arm/boot')
117 files changed, 9272 insertions, 1133 deletions
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index c877087..3fdab01 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif +include $(srctree)/arch/arm/boot/dts/Makefile + # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index f41b38c..9deb56a 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -32,6 +32,9 @@ extern void error(char *); # define Tracecv(c,x) #endif +/* Not needed, but used in some headers pulled in by decompressors */ +extern char * strstr(const char * s1, const char *s2); + #ifdef CONFIG_KERNEL_GZIP #include "../../../../lib/decompress_inflate.c" #endif diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 8e2a8fc..df89983 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -25,7 +25,13 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); extern void error(char *x); +#ifdef CONFIG_ARCH_MULTIPLATFORM +static inline void putc(int c) {} +static inline void flush(void) {} +static inline void arch_decomp_setup(void) {} +#else #include <mach/uncompress.h> +#endif #ifdef CONFIG_DEBUG_ICEDCC diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile new file mode 100644 index 0000000..29f541f0 --- /dev/null +++ b/arch/arm/boot/dts/Makefile @@ -0,0 +1,108 @@ +ifeq ($(CONFIG_OF),y) + +dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ + at91sam9263ek.dtb \ + at91sam9g20ek_2mmc.dtb \ + at91sam9g20ek.dtb \ + at91sam9g25ek.dtb \ + at91sam9m10g45ek.dtb \ + at91sam9n12ek.dtb \ + ethernut5.dtb \ + evk-pro3.dtb \ + kizbox.dtb \ + tny_a9260.dtb \ + tny_a9263.dtb \ + tny_a9g20.dtb \ + usb_a9260.dtb \ + usb_a9263.dtb \ + usb_a9g20.dtb +dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ + dove-cubox.dtb \ + dove-dove-db.dtb +dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ + exynos4210-smdkv310.dtb \ + exynos4210-trats.dtb \ + exynos5250-smdk5250.dtb +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \ + imx53-ard.dtb \ + imx53-evk.dtb \ + imx53-qsb.dtb \ + imx53-smd.dtb +dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb +dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ + kirkwood-dns325.dtb \ + kirkwood-dockstar.dtb \ + kirkwood-dreamplug.dtb \ + kirkwood-goflexnet.dtb \ + kirkwood-ib62x0.dtb \ + kirkwood-iconnect.dtb \ + kirkwood-iomega_ix2_200.dtb \ + kirkwood-km_kirkwood.dtb \ + kirkwood-lschlv2.dtb \ + kirkwood-lsxhl.dtb \ + kirkwood-ts219-6281.dtb \ + kirkwood-ts219-6282.dtb +dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ + msm8960-cdp.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ + armada-xp-db.dtb +dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ + imx53-ard.dtb \ + imx53-evk.dtb \ + imx53-qsb.dtb \ + imx53-smd.dtb \ + imx6q-arm2.dtb \ + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb +dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ + imx23-olinuxino.dtb \ + imx23-stmp378x_devb.dtb \ + imx28-apx4devkit.dtb \ + imx28-cfa10036.dtb \ + imx28-cfa10049.dtb \ + imx28-evk.dtb \ + imx28-m28evk.dtb \ + imx28-tx28.dtb +dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3-beagle-xm.dtb \ + omap3-evm.dtb \ + omap3-tobi.dtb \ + omap4-panda.dtb \ + omap4-pandaES.dtb \ + omap4-var_som.dtb \ + omap4-sdp.dtb \ + omap5-evm.dtb +dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb +dtb-$(CONFIG_ARCH_U8500) += snowball.dtb +dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ + r8a7740-armadillo800eva.dtb \ + sh73a0-kzm9g.dtb +dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ + spear1340-evb.dtb +dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ + spear310-evb.dtb \ + spear320-evb.dtb +dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb +dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ + tegra20-medcom-wide.dtb \ + tegra20-paz00.dtb \ + tegra20-plutux.dtb \ + tegra20-seaboard.dtb \ + tegra20-tec.dtb \ + tegra20-trimslice.dtb \ + tegra20-ventana.dtb \ + tegra20-whistler.dtb \ + tegra30-cardhu-a02.dtb \ + tegra30-cardhu-a04.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ + vexpress-v2p-ca9.dtb \ + vexpress-v2p-ca15-tc1.dtb \ + vexpress-v2p-ca15_a7.dtb \ + xenvm-4.2.dtb + +endif diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index a9af4db..c634f87 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -17,4 +17,64 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d6a97d9..185d632 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -17,4 +17,104 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bd0cff3..bb31bff 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -69,95 +69,146 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x44e07000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <96>; }; - gpio2: gpio@4804C000 { + gpio2: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x4804c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <98>; }; - gpio3: gpio@481AC000 { + gpio3: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ac000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <32>; }; - gpio4: gpio@481AE000 { + gpio4: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ae000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <62>; }; - uart1: serial@44E09000 { + uart1: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <72>; + status = "disabled"; }; uart2: serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <73>; + status = "disabled"; }; uart3: serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <74>; + status = "disabled"; }; - uart4: serial@481A6000 { + uart4: serial@481a6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <44>; + status = "disabled"; }; - uart5: serial@481A8000 { + uart5: serial@481a8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <45>; + status = "disabled"; }; - uart6: serial@481AA000 { + uart6: serial@481aa000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <46>; + status = "disabled"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; + reg = <0x44e0b000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <70>; + status = "disabled"; }; - i2c2: i2c@4802A000 { + i2c2: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <71>; + status = "disabled"; }; - i2c3: i2c@4819C000 { + i2c3: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; + reg = <0x4819c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <30>; + status = "disabled"; }; wdt2: wdt@44e35000 { compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <91>; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6b6b932..16cc82c 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -63,6 +63,11 @@ reg = <0xd0020300 0x30>; interrupts = <37>, <38>, <39>, <40>; }; + + addr-decoding@d0020000 { + compatible = "marvell,armada-addr-decoding-controller"; + reg = <0xd0020000 0x258>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 3228ccc..2069151 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -21,6 +21,12 @@ model = "Marvell Armada 370 family SoC"; compatible = "marvell,armada370", "marvell,armada-370-xp"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + mpic: interrupt-controller@d0020000 { reg = <0xd0020a00 0x1d0>, <0xd0021870 0x58>; @@ -31,5 +37,43 @@ compatible = "marvell,armada-370-xp-system-controller"; reg = <0xd0018200 0x100>; }; + + pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; + ngpios = <2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f97040d..b1fc728 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -14,11 +14,11 @@ */ /dts-v1/; -/include/ "armada-xp.dtsi" +/include/ "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Evaluation Board"; - compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi new file mode 100644 index 0000000..ea35519 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -0,0 +1,57 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78230 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78230 SoC"; + compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + soc { + pinctrl { + compatible = "marvell,mv78230-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi new file mode 100644 index 0000000..2057863 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -0,0 +1,70 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78260 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78260 SoC"; + compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + soc { + pinctrl { + compatible = "marvell,mv78260-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>, <23>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi new file mode 100644 index 0000000..ffac983 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -0,0 +1,70 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78460 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78460 SoC"; + compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + soc { + pinctrl { + compatible = "marvell,mv78460-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>, <23>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <24>; + }; + }; + }; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts new file mode 100644 index 0000000..7dd860f --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -0,0 +1,12 @@ +/dts-v1/; +/memreserve/ 0x0c000000 0x04000000; +/include/ "bcm2835.dtsi" + +/ { + compatible = "raspberrypi,model-b", "brcm,bcm2835"; + model = "Raspberry Pi Model B"; + + memory { + reg = <0 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi new file mode 100644 index 0000000..0b61939 --- /dev/null +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -0,0 +1,39 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "brcm,bcm2835"; + model = "BCM2835"; + interrupt-parent = <&intc>; + + chosen { + bootargs = "earlyprintk console=ttyAMA0"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x7e000000 0x20000000 0x02000000>; + + timer { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7e003000 0x1000>; + interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + clock-frequency = <1000000>; + }; + + intc: interrupt-controller { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart@20201000 { + compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; + reg = <0x7e201000 0x1000>; + interrupts = <2 25>; + clock-frequency = <3000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 3180a9c..748ba7a 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -194,6 +194,8 @@ interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; ranges; prcmu-timer-4@80157450 { @@ -330,6 +332,7 @@ ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ + interrupt-parent = <&intc>; interrupts = <0 40 0x4>; interrupt-controller; #interrupt-cells = <2>; @@ -371,7 +374,7 @@ }; ab8500-ponkey { - compatible = "stericsson,ab8500-ponkey"; + compatible = "stericsson,ab8500-poweron-key"; interrupts = <6 0x4 7 0x4>; interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; @@ -389,6 +392,12 @@ compatible = "stericsson,ab8500-debug"; }; + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; @@ -471,48 +480,63 @@ }; i2c@80004000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80122000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80128000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80110000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@8012a000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; ssp@80002000 { compatible = "arm,pl022", "arm,primecell"; - reg = <80002000 0x1000>; + reg = <0x80002000 0x1000>; interrupts = <0 14 0x4>; #address-cells = <1>; #size-cells = <0>; @@ -580,6 +604,39 @@ status = "disabled"; }; + msp0: msp@80123000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80123000 0x1000>; + interrupts = <0 31 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + // HDMI sound + msp2: msp@80117000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80117000 0x1000>; + interrupts = <0 98 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + external-bus@50000000 { compatible = "simple-bus"; reg = <0x50000000 0x4000000>; diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts new file mode 100644 index 0000000..61a8062 --- /dev/null +++ b/arch/arm/boot/dts/dove-cm-a510.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Compulab CM-A510"; + compatible = "compulab,cm-a510", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts new file mode 100644 index 0000000..0adbd5a --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpio0 18 1>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts new file mode 100644 index 0000000..e5a920b --- /dev/null +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Marvell DB-MV88AP510-BP Development Board"; + compatible = "marvell,dove-db", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash ST-M25P32-VMF6P */ + spi-flash@0 { + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi new file mode 100644 index 0000000..96fb824 --- /dev/null +++ b/arch/arm/boot/dts/dove.dtsi @@ -0,0 +1,143 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "marvell,dove"; + model = "Marvell Armada 88AP510 SoC"; + + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; + + mbus@f1000000 { + compatible = "simple-bus"; + ranges = <0 0xf1000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <7>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <8>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <9>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <10>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + }; + + gpio0: gpio@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpio = <32>; + interrupts = <12>, <13>, <14>, <60>; + }; + + gpio1: gpio@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpio = <32>; + interrupts = <61>; + }; + + gpio2: gpio@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpio = <8>; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + spi1: spi@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; + status = "disabled"; + }; + + sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + status = "disabled"; + }; + + sdio1: sdio@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + status = "disabled"; + }; + + sata0: sata@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + nr-ports = <1>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts index d79b28d..a4ba31b 100644 --- a/arch/arm/boot/dts/ea3250.dts +++ b/arch/arm/boot/dts/ea3250.dts @@ -166,9 +166,116 @@ #size-cells = <0>; autorepeat; button@21 { - label = "GPIO Key UP"; + label = "Interrupt Key"; linux,code = <103>; gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ }; + key1 { + label = "KEY1"; + linux,code = <1>; + gpios = <&pca9532 0 0>; + }; + key2 { + label = "KEY2"; + linux,code = <2>; + gpios = <&pca9532 1 0>; + }; + key3 { + label = "KEY3"; + linux,code = <3>; + gpios = <&pca9532 2 0>; + }; + key4 { + label = "KEY4"; + linux,code = <4>; + gpios = <&pca9532 3 0>; + }; + joy0 { + label = "Joystick Key 0"; + linux,code = <10>; + gpios = <&gpio 2 0 0>; /* P2.0 */ + }; + joy1 { + label = "Joystick Key 1"; + linux,code = <11>; + gpios = <&gpio 2 1 0>; /* P2.1 */ + }; + joy2 { + label = "Joystick Key 2"; + linux,code = <12>; + gpios = <&gpio 2 2 0>; /* P2.2 */ + }; + joy3 { + label = "Joystick Key 3"; + linux,code = <13>; + gpios = <&gpio 2 3 0>; /* P2.3 */ + }; + joy4 { + label = "Joystick Key 4"; + linux,code = <14>; + gpios = <&gpio 2 4 0>; /* P2.4 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + /* LEDs on OEM Board */ + + led1 { + gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + + led2 { + gpios = <&gpio 2 10 1>; /* P2.10, active low */ + default-state = "off"; + }; + + led3 { + gpios = <&gpio 2 11 1>; /* P2.11, active low */ + default-state = "off"; + }; + + led4 { + gpios = <&gpio 2 12 1>; /* P2.12, active low */ + default-state = "off"; + }; + + /* LEDs on Base Board */ + + lede1 { + gpios = <&pca9532 8 0>; + default-state = "off"; + }; + lede2 { + gpios = <&pca9532 9 0>; + default-state = "off"; + }; + lede3 { + gpios = <&pca9532 10 0>; + default-state = "off"; + }; + lede4 { + gpios = <&pca9532 11 0>; + default-state = "off"; + }; + lede5 { + gpios = <&pca9532 12 0>; + default-state = "off"; + }; + lede6 { + gpios = <&pca9532 13 0>; + default-state = "off"; + }; + lede7 { + gpios = <&pca9532 14 0>; + default-state = "off"; + }; + lede8 { + gpios = <&pca9532 15 0>; + default-state = "off"; + }; }; }; diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi new file mode 100644 index 0000000..f97f70f8 --- /dev/null +++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi @@ -0,0 +1,67 @@ +/* + * Common devices used in different OMAP boards + */ + +/ { + elpida_ECB240ABACN: lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi new file mode 100644 index 0000000..a26c3dd --- /dev/null +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -0,0 +1,248 @@ +/* + * Samsung's Exynos4 SoC series common device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4 SoC series device nodes are listed in this file. Particular + * SoCs from Exynos4 series can include this file and provide values for SoCs + * specfic bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + + gic:interrupt-controller@10490000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10490000 0x1000>, <0x10480000 0x100>; + }; + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + }; + + watchdog@10060000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x10060000 0x100>; + interrupts = <0 43 0>; + status = "disabled"; + }; + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 0>, <0 45 0>; + status = "disabled"; + }; + + keypad@100A0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100A0000 0x100>; + interrupts = <0 109 0>; + status = "disabled"; + }; + + sdhci@12510000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12510000 0x100>; + interrupts = <0 73 0>; + status = "disabled"; + }; + + sdhci@12520000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12520000 0x100>; + interrupts = <0 74 0>; + status = "disabled"; + }; + + sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <0 75 0>; + status = "disabled"; + }; + + sdhci@12540000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12540000 0x100>; + interrupts = <0 76 0>; + status = "disabled"; + }; + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 52 0>; + status = "disabled"; + }; + + serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 53 0>; + status = "disabled"; + }; + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + status = "disabled"; + }; + + serial@13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x100>; + interrupts = <0 55 0>; + status = "disabled"; + }; + + i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 58 0>; + status = "disabled"; + }; + + i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 59 0>; + status = "disabled"; + }; + + i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 60 0>; + status = "disabled"; + }; + + i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 61 0>; + status = "disabled"; + }; + + i2c@138A0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 62 0>; + status = "disabled"; + }; + + i2c@138B0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 63 0>; + status = "disabled"; + }; + + i2c@138C0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 64 0>; + status = "disabled"; + }; + + i2c@138D0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 65 0>; + status = "disabled"; + }; + + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 7>; /* preliminary */ + rx-dma-channel = <&pdma1 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi_2: spi@13940000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13940000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 9>; /* preliminary */ + rx-dma-channel = <&pdma0 8>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 35 0>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 36 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 0c49caa..3e68f52 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -40,6 +40,7 @@ <&gpk2 4 2 3 3>, <&gpk2 5 2 3 3>, <&gpk2 6 2 3 3>; + status = "okay"; }; sdhci@12510000 { @@ -53,6 +54,7 @@ <&gpk0 4 2 3 3>, <&gpk0 5 2 3 3>, <&gpk0 6 2 3 3>; + status = "okay"; }; gpio_keys { @@ -62,88 +64,45 @@ up { label = "Up"; - gpios = <&gpx2 0 0 0 2>; + gpios = <&gpx2 0 0 0x10000 2>; linux,code = <103>; + gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 0 0 2>; + gpios = <&gpx2 1 0 0x10000 2>; linux,code = <108>; + gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 0 0 2>; + gpios = <&gpx1 7 0 0x10000 2>; linux,code = <158>; + gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 0 0 2>; + gpios = <&gpx1 6 0 0x10000 2>; linux,code = <102>; + gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 0 0 2>; + gpios = <&gpx1 5 0 0x10000 2>; linux,code = <139>; + gpio-key,wakeup; }; }; - keypad@100A0000 { - status = "disabled"; - }; - - sdhci@12520000 { - status = "disabled"; - }; - - sdhci@12540000 { - status = "disabled"; - }; - - i2c@13860000 { - status = "disabled"; - }; - - i2c@13870000 { - status = "disabled"; - }; - - i2c@13880000 { - status = "disabled"; - }; - - i2c@13890000 { - status = "disabled"; - }; - - i2c@138A0000 { - status = "disabled"; - }; - - i2c@138B0000 { - status = "disabled"; - }; - - i2c@138C0000 { - status = "disabled"; - }; - - i2c@138D0000 { - status = "disabled"; - }; - - spi_0: spi@13920000 { - status = "disabled"; - }; - - spi_1: spi@13930000 { - status = "disabled"; - }; - - spi_2: spi@13940000 { - status = "disabled"; + leds { + compatible = "gpio-leds"; + status { + gpios = <&gpx1 3 0 0x10000 2>; + linux,default-trigger = "heartbeat"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi new file mode 100644 index 0000000..b12cf27 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -0,0 +1,457 @@ +/* + * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2011-2012 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_a: uart-audio-a { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_b: uart-audio-b { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-6", "gpb-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@11000000 { + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd4_clk: sd4-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd4_cmd: sd4-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd4_cd: sd4-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd4_bus1: sd4-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd4_bus4: sd4-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd4_bus8: sd4-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <4>; + samsung,pin-drv = <0>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpk3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpk3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpk3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpk3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + eint0: ext-int0 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gpx2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@03860000 { + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <0x3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 1beccc8..63610c3 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -26,7 +26,7 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; sdhci@12530000 { @@ -40,6 +40,7 @@ <&gpk2 4 2 3 3>, <&gpk2 5 2 3 3>, <&gpk2 6 2 3 3>; + status = "okay"; }; keypad@100A0000 { @@ -47,6 +48,7 @@ samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; linux,keypad-wakeup; + status = "okay"; row-gpios = <&gpx2 0 3 3 0>, <&gpx2 1 3 3 0>; @@ -128,6 +130,7 @@ samsung,i2c-max-bus-freq = <20000>; gpios = <&gpd1 0 2 3 0>, <&gpd1 1 2 3 0>; + status = "okay"; eeprom@50 { compatible = "samsung,24ad0xd1"; @@ -140,58 +143,11 @@ }; }; - sdhci@12510000 { - status = "disabled"; - }; - - sdhci@12520000 { - status = "disabled"; - }; - - sdhci@12540000 { - status = "disabled"; - }; - - i2c@13870000 { - status = "disabled"; - }; - - i2c@13880000 { - status = "disabled"; - }; - - i2c@13890000 { - status = "disabled"; - }; - - i2c@138A0000 { - status = "disabled"; - }; - - i2c@138B0000 { - status = "disabled"; - }; - - i2c@138C0000 { - status = "disabled"; - }; - - i2c@138D0000 { - status = "disabled"; - }; - - spi_0: spi@13920000 { - status = "disabled"; - }; - - spi_1: spi@13930000 { - status = "disabled"; - }; - spi_2: spi@13940000 { gpios = <&gpc1 1 5 3 0>, <&gpc1 3 5 3 0>, <&gpc1 4 5 3 0>; + status = "okay"; w25x80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts new file mode 100644 index 0000000..73567b8 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -0,0 +1,237 @@ +/* + * Samsung's Exynos4210 based Trats board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Trats board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Samsung Trats based on Exynos4210"; + compatible = "samsung,trats", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x20000000 + 0x60000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + }; + + vemmc_reg: voltage-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 1 0 0>; + enable-active-high; + }; + + sdhci_emmc: sdhci@12510000 { + bus-width = <8>; + non-removable; + broken-voltage; + gpios = <&gpk0 0 2 0 3>, + <&gpk0 1 2 0 3>, + <&gpk0 3 2 2 3>, + <&gpk0 4 2 2 3>, + <&gpk0 5 2 2 3>, + <&gpk0 6 2 2 3>, + <&gpk1 3 3 3 3>, + <&gpk1 4 3 3 3>, + <&gpk1 5 3 3 3>, + <&gpk1 6 3 3 3>; + vmmc-supply = <&vemmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + i2c@138B0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + gpios = <&gpb 6 3 3 0>, + <&gpb 7 3 3 0>; + status = "okay"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + + reg = <0x66>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>, + <&gpx0 6 1 0 0>, + <&gpl0 0 1 0 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB/VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.3V_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vlcd_reg: LDO15 { + regulator-name = "VLCD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V_C210"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 02891fe..214c557 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -19,199 +19,60 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +/include/ "exynos4.dtsi" +/include/ "exynos4210-pinctrl.dtsi" / { compatible = "samsung,exynos4210"; - interrupt-parent = <&gic>; aliases { - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; }; gic:interrupt-controller@10490000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; cpu-offset = <0x8000>; - reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; combiner:interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x10440000 0x1000>; interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; }; - watchdog@10060000 { - compatible = "samsung,s3c2410-wdt"; - reg = <0x10060000 0x100>; - interrupts = <0 43 0>; - }; - - rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 44 0>, <0 45 0>; - }; - - keypad@100A0000 { - compatible = "samsung,s5pv210-keypad"; - reg = <0x100A0000 0x100>; - interrupts = <0 109 0>; - }; - - sdhci@12510000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12510000 0x100>; - interrupts = <0 73 0>; - }; - - sdhci@12520000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12520000 0x100>; - interrupts = <0 74 0>; - }; - - sdhci@12530000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12530000 0x100>; - interrupts = <0 75 0>; - }; - - sdhci@12540000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12540000 0x100>; - interrupts = <0 76 0>; - }; - - serial@13800000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13800000 0x100>; - interrupts = <0 52 0>; - }; - - serial@13810000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13810000 0x100>; - interrupts = <0 53 0>; - }; - - serial@13820000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13820000 0x100>; - interrupts = <0 54 0>; - }; - - serial@13830000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13830000 0x100>; - interrupts = <0 55 0>; - }; - - i2c@13860000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13860000 0x100>; - interrupts = <0 58 0>; - }; - - i2c@13870000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13870000 0x100>; - interrupts = <0 59 0>; - }; - - i2c@13880000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13880000 0x100>; - interrupts = <0 60 0>; - }; - - i2c@13890000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13890000 0x100>; - interrupts = <0 61 0>; - }; - - i2c@138A0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x138A0000 0x100>; - interrupts = <0 62 0>; - }; - - i2c@138B0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x138B0000 0x100>; - interrupts = <0 63 0>; - }; - - i2c@138C0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x138C0000 0x100>; - interrupts = <0 64 0>; - }; - - i2c@138D0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x138D0000 0x100>; - interrupts = <0 65 0>; - }; - - spi_0: spi@13920000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13920000 0x100>; - interrupts = <0 66 0>; - tx-dma-channel = <&pdma0 7>; /* preliminary */ - rx-dma-channel = <&pdma0 6>; /* preliminary */ - #address-cells = <1>; - #size-cells = <0>; - }; - - spi_1: spi@13930000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13930000 0x100>; - interrupts = <0 67 0>; - tx-dma-channel = <&pdma1 7>; /* preliminary */ - rx-dma-channel = <&pdma1 6>; /* preliminary */ - #address-cells = <1>; - #size-cells = <0>; - }; - - spi_2: spi@13940000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13940000 0x100>; - interrupts = <0 68 0>; - tx-dma-channel = <&pdma0 9>; /* preliminary */ - rx-dma-channel = <&pdma0 8>; /* preliminary */ - #address-cells = <1>; - #size-cells = <0>; + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + interrupt-controller; + #interrupt-cells = <2>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "arm,amba-bus"; - interrupt-parent = <&gic>; - ranges; + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + interrupt-controller; + #interrupt-cells = <2>; - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <0 35 0>; + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, + <0 32 0>; }; + }; - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <0 36 0>; - }; + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x03860000 0x1000>; }; gpio-controllers { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 8a5e348..a352df4 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -16,12 +16,19 @@ model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; compatible = "samsung,smdk5250", "samsung,exynos5250"; + aliases { + mshc0 = &dwmmc_0; + mshc1 = &dwmmc_1; + mshc2 = &dwmmc_2; + mshc3 = &dwmmc_3; + }; + memory { reg = <0x40000000 0x80000000>; }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; i2c@12C60000 { @@ -72,6 +79,56 @@ status = "disabled"; }; + dwmmc_0: dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <8>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; + + dwmmc_1: dwmmc1@12210000 { + status = "disabled"; + }; + + dwmmc_2: dwmmc2@12220000 { + num-slots = <1>; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <4>; + samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; + gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, + <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, + <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>, + <&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>, + <&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>; + }; + }; + + dwmmc_3: dwmmc3@12230000 { + status = "disabled"; + }; + spi_0: spi@12d20000 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 004aaa8..dddfd6e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -27,6 +27,10 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; + gsc0 = &gsc_0; + gsc1 = &gsc_1; + gsc2 = &gsc_2; + gsc3 = &gsc_3; }; gic:interrupt-controller@10481000 { @@ -182,6 +186,38 @@ #size-cells = <0>; }; + dwmmc0@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc1@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12210000 0x1000>; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc2@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12220000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc3@12230000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12230000 0x1000>; + interrupts = <0 78 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; @@ -460,4 +496,28 @@ #gpio-cells = <4>; }; }; + + gsc_0: gsc@0x13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; + }; + + gsc_1: gsc@0x13e10000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e10000 0x1000>; + interrupts = <0 86 0>; + }; + + gsc_2: gsc@0x13e20000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e20000 0x1000>; + interrupts = <0 87 0>; + }; + + gsc_3: gsc@0x13e30000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e30000 0x1000>; + interrupts = <0 88 0>; + }; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 9fecf1a..0c6fc34 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -121,6 +121,10 @@ compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x10000>; interrupts = <0 83 4>; + calxeda,port-phys = <&combophy5 0 &combophy0 0 + &combophy0 1 &combophy0 2 + &combophy0 3>; + dma-coherent; }; sdhci@ffe0e000 { @@ -306,5 +310,19 @@ reg = <0xfff51000 0x1000>; interrupts = <0 80 4 0 81 4 0 82 4>; }; + + combophy0: combo-phy@fff58000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff58000 0x1000>; + phydev = <5>; + }; + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; }; }; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts new file mode 100644 index 0000000..2131d77 --- /dev/null +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -0,0 +1,95 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson HREF platform with Device Tree"; + compatible = "st-ericsson,hrefv60+"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + tps61052@33 { + compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + compatible = "lp5521"; + reg = <0x33>; + }; + + lp5521@0x34 { + compatible = "lp5521"; + reg = <0x34>; + }; + + bh1780@0x29 { + compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index e3486f4..035c13f 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -42,12 +42,13 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 20912b1..384d8b6 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -31,6 +31,22 @@ bus-width = <4>; status = "okay"; }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; }; apbx@80040000 { @@ -39,6 +55,47 @@ pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */ + gpio = <&gpio0 17 0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "green"; + gpios = <&gpio2 1 0>; + linux,default-trigger = "default-on"; }; }; }; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index 757a327f..85c3864 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -36,7 +36,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index e613831..9ca4ca7 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -43,7 +43,7 @@ ranges; icoll: interrupt-controller@80000000 { - compatible = "fsl,imx23-icoll", "fsl,mxs-icoll"; + compatible = "fsl,imx23-icoll", "fsl,icoll"; interrupt-controller; #interrupt-cells = <1>; reg = <0x80000000 0x2000>; @@ -52,6 +52,7 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; + clocks = <&clks 15>; }; ecc@80008000 { @@ -67,6 +68,7 @@ reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 34>; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -74,6 +76,7 @@ ssp0: ssp@80010000 { reg = <0x80010000 0x2000>; interrupts = <15 14>; + clocks = <&clks 33>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -140,6 +143,17 @@ fsl,pull-up = <0>; }; + auart0_2pins_a: auart0-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */ + 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < @@ -183,7 +197,6 @@ 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ >; fsl,drive-strength = <1>; @@ -280,6 +293,7 @@ dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; + clocks = <&clks 16>; }; dcp@80028000 { @@ -306,12 +320,14 @@ compatible = "fsl,imx23-lcdif"; reg = <0x80030000 2000>; interrupts = <46 45>; + clocks = <&clks 38>; status = "disabled"; }; ssp1: ssp@80034000 { reg = <0x80034000 0x2000>; interrupts = <2 20>; + clocks = <&clks 33>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -329,9 +345,10 @@ reg = <0x80040000 0x40000>; ranges; - clkctl@80040000 { + clks: clkctrl@80040000 { + compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; - status = "disabled"; + #clock-cells = <1>; }; saif0: saif@80042000 { @@ -383,20 +400,23 @@ pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; + clocks = <&clks 30>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { + compatible = "fsl,imx23-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; - status = "disabled"; + interrupts = <28 29 30 31>; }; auart0: serial@8006c000 { compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; + clocks = <&clks 32>; status = "disabled"; }; @@ -404,6 +424,7 @@ compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <59 60 58>; + clocks = <&clks 32>; status = "disabled"; }; @@ -411,11 +432,15 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x80070000 0x2000>; interrupts = <0>; + clocks = <&clks 32>, <&clks 16>; + clock-names = "uart", "apb_pclk"; status = "disabled"; }; - usbphy@8007c000 { + usbphy0: usbphy@8007c000 { + compatible = "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; + clocks = <&clks 41>; status = "disabled"; }; }; @@ -428,8 +453,12 @@ reg = <0x80080000 0x80000>; ranges; - usbctrl@80080000 { + usb0: usb@80080000 { + compatible = "fsl,imx23-usb", "fsl,imx27-usb"; reg = <0x80080000 0x40000>; + interrupts = <11>; + fsl,usbphy = <&usbphy0>; + clocks = <&clks 40>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index 2b0ff60..af50469 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -23,10 +23,6 @@ soc { aipi@10000000 { /* aipi */ - wdog@10002000 { - status = "okay"; - }; - serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; @@ -49,7 +45,7 @@ i2c@1001d000 { clock-frequency = <400000>; status = "okay"; - at24@4c { + at24@52 { compatible = "at,24c32"; pagesize = <32>; reg = <0x52>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 5303ab6..3e54f14 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -62,7 +62,6 @@ compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x4000>; interrupts = <27>; - status = "disabled"; }; uart1: serial@1000a000 { diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index b383417..5171667 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts new file mode 100644 index 0000000..05c892e --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -0,0 +1,99 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10049 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10049 Board"; + compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + spi3_pins_cfa10049: spi3-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */ + 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ + 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ + 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + + ssp3: ssp@80016000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_cfa10049>; + status = "okay"; + + gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + }; + + gpio6: gpio6@1 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <1>; + registers-number = <4>; + spi-max-frequency = <100000>; + }; + + }; + }; + + apbx@80040000 { + i2c1: i2c@8005a000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 773c0e8..a0ad71c 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -46,11 +46,28 @@ wp-gpios = <&gpio0 28 0>; }; + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ @@ -128,6 +145,10 @@ status = "okay"; }; + lradc@80050000 { + status = "okay"; + }; + i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -140,6 +161,12 @@ VDDIO-supply = <®_3p3v>; }; + + at24@51 { + compatible = "at24,24c32"; + pagesize = <32>; + reg = <0x51>; + }; }; pwm: pwm@80064000 { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 183a3fd..3bab6b0 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -23,6 +23,8 @@ apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; @@ -61,19 +63,40 @@ &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; - wp-gpios = <&gpio3 10 1>; + wp-gpios = <&gpio3 10 0>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */ + 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -129,6 +152,7 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { @@ -151,32 +175,51 @@ }; }; + lradc@80050000 { + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; + usbphy0: usbphy@8007c000 { status = "okay"; }; - auart3: serial@80070000 { + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + + auart0: serial@8006a000 { pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; + pinctrl-0 = <&auart0_2pins_a>; status = "okay"; }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy0_pins_a>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy1_pins_a>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio3 11 0>; status = "okay"; }; @@ -198,6 +241,30 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 12 0>; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 13 0>; + }; }; sound { diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 62bf767..37be532 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -25,7 +25,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ @@ -34,6 +34,24 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + mac0_pins_gpio: mac0-gpio-mode@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */ + 0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */ + 0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */ + 0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */ + 0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */ + 0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */ + 0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */ + 0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */ + 0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; }; @@ -72,8 +90,9 @@ ahb@80080000 { mac0: ethernet@800f0000 { phy-mode = "rmii"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio_mode"; pinctrl-0 = <&mac0_pins_a>; + pinctrl-1 = <&mac0_pins_gpio>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 3fa6d19..59fbfba 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -27,6 +27,8 @@ serial2 = &auart2; serial3 = &auart3; serial4 = &auart4; + ethernet0 = &mac0; + ethernet1 = &mac1; }; cpus { @@ -50,7 +52,7 @@ ranges; icoll: interrupt-controller@80000000 { - compatible = "fsl,imx28-icoll", "fsl,mxs-icoll"; + compatible = "fsl,imx28-icoll", "fsl,icoll"; interrupt-controller; #interrupt-cells = <1>; reg = <0x80000000 0x2000>; @@ -65,6 +67,7 @@ dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; + clocks = <&clks 25>; }; perfmon@80006000 { @@ -81,34 +84,47 @@ reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 50>; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; ssp0: ssp@80010000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80010000 0x2000>; interrupts = <96 82>; + clocks = <&clks 46>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80012000 0x2000>; interrupts = <97 83>; + clocks = <&clks 47>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80014000 0x2000>; interrupts = <98 84>; + clocks = <&clks 48>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80016000 0x2000>; interrupts = <99 85>; + clocks = <&clks 49>; fsl,ssp-dma-channel = <3>; status = "disabled"; }; @@ -410,6 +426,28 @@ fsl,pull-up = <1>; }; + i2c0_pins_b: i2c0@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */ + 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + i2c1_pins_a: i2c1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */ + 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < @@ -453,6 +491,16 @@ fsl,pull-up = <0>; }; + pwm4_pins_a: pwm4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31d0 /* MX28_PAD_PWM4__PWM_4 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -507,6 +555,49 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + spi2_pins_a: spi2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */ + 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */ + 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */ + 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + usbphy0_pins_a: usbphy0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + usbphy0_pins_b: usbphy0@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + usbphy1_pins_a: usbphy1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; digctl@8001c000 { @@ -523,6 +614,7 @@ dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; + clocks = <&clks 26>; }; dcp@80028000 { @@ -551,6 +643,7 @@ compatible = "fsl,imx28-lcdif"; reg = <0x80030000 0x2000>; interrupts = <38 86>; + clocks = <&clks 55>; status = "disabled"; }; @@ -558,6 +651,8 @@ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80032000 0x2000>; interrupts = <8>; + clocks = <&clks 58>, <&clks 58>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -565,6 +660,8 @@ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80034000 0x2000>; interrupts = <9>; + clocks = <&clks 59>, <&clks 59>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -611,15 +708,17 @@ reg = <0x80040000 0x40000>; ranges; - clkctl@80040000 { + clks: clkctrl@80040000 { + compatible = "fsl,imx28-clkctrl"; reg = <0x80040000 0x2000>; - status = "disabled"; + #clock-cells = <1>; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59 80>; + clocks = <&clks 53>; fsl,saif-dma-channel = <4>; status = "disabled"; }; @@ -633,12 +732,16 @@ compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; interrupts = <58 81>; + clocks = <&clks 54>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { + compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; + interrupts = <10 14 15 16 17 18 19 + 20 21 22 23 24 25>; status = "disabled"; }; @@ -677,20 +780,23 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; + clocks = <&clks 44>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { + compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; - status = "disabled"; + interrupts = <48 49 50 51>; }; auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + clocks = <&clks 45>; status = "disabled"; }; @@ -698,6 +804,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; + clocks = <&clks 45>; status = "disabled"; }; @@ -705,6 +812,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; + clocks = <&clks 45>; status = "disabled"; }; @@ -712,6 +820,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; + clocks = <&clks 45>; status = "disabled"; }; @@ -719,6 +828,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; + clocks = <&clks 45>; status = "disabled"; }; @@ -726,18 +836,22 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x80074000 0x1000>; interrupts = <47>; + clocks = <&clks 45>, <&clks 26>; + clock-names = "uart", "apb_pclk"; status = "disabled"; }; usbphy0: usbphy@8007c000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; + clocks = <&clks 62>; status = "disabled"; }; usbphy1: usbphy@8007e000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; + clocks = <&clks 63>; status = "disabled"; }; }; @@ -754,6 +868,7 @@ compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; interrupts = <93>; + clocks = <&clks 60>; fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -762,6 +877,7 @@ compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; interrupts = <92>; + clocks = <&clks 61>; fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -775,6 +891,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -782,6 +900,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f4000 0x4000>; interrupts = <102>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 59d9789..cbd2b1c 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,23 +25,31 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; fsl,cd-controller; fsl,wp-controller; status = "okay"; }; esdhc@70008000 { /* ESDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; cd-gpios = <&gpio1 6 0>; wp-gpios = <&gpio1 5 0>; status = "okay"; }; uart3: serial@7000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; fsl,uart-has-rtscts; status = "okay"; }; ecspi@70010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; status = "okay"; @@ -169,31 +177,43 @@ }; }; - wdog@73f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@73fa8000 { - compatible = "fsl,imx51-iomuxc-babbage"; - reg = <0x73fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ + 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ + 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ + 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ + 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ + 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ + 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ + >; + }; + }; }; uart1: serial@73fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; fsl,uart-has-rtscts; status = "okay"; }; uart2: serial@73fc0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; status = "okay"; }; }; aips@80000000 { /* aips-2 */ - sdma@83fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; - }; - i2c@83fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; sgtl5000: codec@0a { @@ -206,10 +226,14 @@ }; audmux@83fd0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; ethernet@83fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "mii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index aba28dc..2f71a91 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -130,6 +130,34 @@ }; }; + usb@73f80000 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80000 0x0200>; + interrupts = <18>; + status = "disabled"; + }; + + usb@73f80200 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80200 0x0200>; + interrupts = <14>; + status = "disabled"; + }; + + usb@73f80400 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80400 0x0200>; + interrupts = <16>; + status = "disabled"; + }; + + usb@73f80600 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80600 0x0200>; + interrupts = <17>; + status = "disabled"; + }; + gpio1: gpio@73f84000 { compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f84000 0x4000>; @@ -174,7 +202,6 @@ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; - status = "disabled"; }; wdog@73f9c000 { /* WDOG2 */ @@ -184,6 +211,122 @@ status = "disabled"; }; + iomuxc@73fa8000 { + compatible = "fsl,imx51-iomuxc"; + reg = <0x73fa8000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */ + 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */ + 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */ + 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */ + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */ + 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */ + 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */ + 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */ + 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */ + 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */ + 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */ + 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */ + 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */ + 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */ + 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */ + 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */ + 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */ + 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */ + 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */ + 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */ + 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */ + 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */ + 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */ + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */ + 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */ + 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */ + 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */ + 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */ + 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */ + >; + }; + }; + + esdhc2 { + pinctrl_esdhc2_1: esdhc2grp-1 { + fsl,pins = < + 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */ + 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */ + 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */ + 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */ + 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */ + 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */ + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */ + 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */ + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */ + 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */ + 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */ + 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */ + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */ + 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */ + >; + }; + }; + + uart3 { + pinctrl_uart3_1: uart3grp-1 { + fsl,pins = < + 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */ + 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */ + 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */ + 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ + >; + }; + }; + }; + uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; @@ -219,6 +362,7 @@ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; cspi@83fc0000 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index da895e9..4be76f2 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -25,31 +25,66 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_2>; cd-gpios = <&gpio1 1 0>; wp-gpios = <&gpio1 9 0>; status = "okay"; }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-ard"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ + 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ + 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ + 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ + 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ + 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ + 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ + 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ + 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ + 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ + 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ + 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ + 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ + 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ + 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ + 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ + 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ + 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ + 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ + 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ + 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ + 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ + 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ + 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ + 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ + 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ + 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ + 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ + 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ + 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ + 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ + 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ + 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ + 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; status = "okay"; }; }; - - aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - }; }; eim-cs1@f4000000 { diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 9c79803..a124d1e 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -25,12 +25,16 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; wp-gpios = <&gpio3 14 0>; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; @@ -56,32 +60,45 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; status = "okay"; }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-evk"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; pmic: mc13892@08 { @@ -96,6 +113,8 @@ }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 2d803a9..08948af 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -25,6 +25,8 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; status = "okay"; }; @@ -35,32 +37,46 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; status = "okay"; }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-qsb"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ + 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; sgtl5000: codec@0a { @@ -72,6 +88,8 @@ }; i2c@63fc8000 { /* I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; status = "okay"; accelerometer: mma8450@1c { @@ -158,10 +176,14 @@ }; audmux@63fd0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 0809102..06c6858 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -25,22 +25,30 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; wp-gpios = <&gpio4 11 0>; status = "okay"; }; esdhc@50008000 { /* ESDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; non-removable; status = "okay"; }; uart3: serial@5000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; fsl,uart-has-rtscts; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; @@ -72,35 +80,49 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; non-removable; status = "okay"; }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-smd"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; uart2: serial@53fc0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; codec: sgtl5000@0a { @@ -120,6 +142,8 @@ }; i2c@63fc8000 { /* I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; status = "okay"; accelerometer: mma8450@1c { @@ -139,6 +163,8 @@ }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index cd37165..221cf33 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -135,6 +135,34 @@ }; }; + usb@53f80000 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80000 0x0200>; + interrupts = <18>; + status = "disabled"; + }; + + usb@53f80200 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80200 0x0200>; + interrupts = <14>; + status = "disabled"; + }; + + usb@53f80400 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80400 0x0200>; + interrupts = <16>; + status = "disabled"; + }; + + usb@53f80600 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80600 0x0200>; + interrupts = <17>; + status = "disabled"; + }; + gpio1: gpio@53f84000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; @@ -179,7 +207,6 @@ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; - status = "disabled"; }; wdog@53f9c000 { /* WDOG2 */ @@ -189,6 +216,161 @@ status = "disabled"; }; + iomuxc@53fa8000 { + compatible = "fsl,imx53-iomuxc"; + reg = <0x53fa8000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */ + 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */ + 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */ + 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */ + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */ + 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */ + 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */ + 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */ + 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */ + 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */ + 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */ + 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */ + 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */ + 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */ + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */ + 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */ + 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */ + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ + 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ + 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ + 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ + 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ + 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + >; + }; + + pinctrl_esdhc1_2: esdhc1grp-2 { + fsl,pins = < + 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ + 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ + 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ + 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ + 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */ + 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */ + 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */ + 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */ + 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ + 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + >; + }; + }; + + esdhc2 { + pinctrl_esdhc2_1: esdhc2grp-1 { + fsl,pins = < + 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */ + 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */ + 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */ + 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */ + 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */ + 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */ + >; + }; + }; + + esdhc3 { + pinctrl_esdhc3_1: esdhc3grp-1 { + fsl,pins = < + 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */ + 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */ + 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */ + 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */ + 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */ + 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */ + 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */ + 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */ + 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */ + 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */ + >; + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = < + 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */ + 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */ + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */ + 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */ + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */ + 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */ + >; + }; + + pinctrl_uart1_2: uart1grp-2 { + fsl,pins = < + 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */ + 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */ + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */ + 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */ + >; + }; + }; + + uart3 { + pinctrl_uart3_1: uart3grp-1 { + fsl,pins = < + 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ + 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ + 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */ + 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */ + >; + }; + }; + }; + uart1: serial@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; @@ -203,6 +385,20 @@ status = "disabled"; }; + can1: can@53fc8000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fc8000 0x4000>; + interrupts = <82>; + status = "disabled"; + }; + + can2: can@53fcc000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fcc000 0x4000>; + interrupts = <83>; + status = "disabled"; + }; + gpio5: gpio@53fdc000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fdc000 0x4000>; @@ -277,6 +473,7 @@ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; cspi@63fc0000 { diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index d792581..15df4c1 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -28,8 +28,27 @@ status = "disabled"; /* gpmi nand conflicts with SD */ }; + aips-bus@02000000 { /* AIPS1 */ + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ + 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ + >; + }; + }; + }; + }; + aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; phy-mode = "rgmii"; status = "okay"; }; @@ -52,6 +71,8 @@ }; uart4: serial@021f0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 72f30f3..d152328 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -46,15 +46,20 @@ iomuxc@020e0000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_hog>; + pinctrl-0 = <&pinctrl_hog>; - gpios { - pinctrl_gpio_hog: gpiohog { + hog { + pinctrl_hog: hoggrp { fsl,pins = < - 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ - 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ - 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ - >; + 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ + 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ + 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ + 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ + >; }; }; }; @@ -63,6 +68,9 @@ aips-bus@02100000 { /* AIPS2 */ usb@02184000 { /* USB OTG */ vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; status = "okay"; }; @@ -71,12 +79,16 @@ }; ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; status = "okay"; }; usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; cd-gpios = <&gpio7 0 0>; wp-gpios = <&gpio7 1 0>; vmmc-supply = <®_3p3v>; @@ -84,6 +96,8 @@ }; usdhc@0219c000 { /* uSDHC4 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_2>; cd-gpios = <&gpio2 6 0>; wp-gpios = <&gpio2 7 0>; vmmc-supply = <®_3p3v>; @@ -99,7 +113,7 @@ uart2: serial@021e8000 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2_1>; + pinctrl-0 = <&pinctrl_uart2_1>; }; i2c@021a0000 { /* I2C1 */ @@ -111,6 +125,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + clocks = <&clks 169>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 07509a1..e596c28c 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -22,28 +22,51 @@ }; soc { - aips-bus@02000000 { /* AIPS1 */ spba-bus@02000000 { uart1: serial@02020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; + + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ + 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ + 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ + 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ + >; + }; + }; + }; }; aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; status = "okay"; }; usdhc@02194000 { /* uSDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; cd-gpios = <&gpio2 2 0>; wp-gpios = <&gpio2 3 0>; status = "okay"; }; usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; cd-gpios = <&gpio2 0 0>; wp-gpios = <&gpio2 1 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index fd57079..f3990b0 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -97,18 +97,23 @@ dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; + clocks = <&clks 106>; }; gpmi-nand@00112000 { - compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x00112000 0x2000>, <0x00114000 0x2000>; - reg-names = "gpmi-nand", "bch"; - interrupts = <0 13 0x04>, <0 15 0x04>; - interrupt-names = "gpmi-dma", "bch"; - fsl,gpmi-dma-channel = <0>; - status = "disabled"; + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 152>, <&clks 153>, <&clks 151>, + <&clks 150>, <&clks 149>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; }; timer@00a00600 { @@ -150,6 +155,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02008000 0x4000>; interrupts = <0 31 0x04>; + clocks = <&clks 112>, <&clks 112>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -159,6 +166,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x0200c000 0x4000>; interrupts = <0 32 0x04>; + clocks = <&clks 113>, <&clks 113>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -168,6 +177,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02010000 0x4000>; interrupts = <0 33 0x04>; + clocks = <&clks 114>, <&clks 114>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -177,6 +188,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02014000 0x4000>; interrupts = <0 34 0x04>; + clocks = <&clks 115>, <&clks 115>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -186,6 +199,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02018000 0x4000>; interrupts = <0 35 0x04>; + clocks = <&clks 116>, <&clks 116>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -193,6 +208,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -205,6 +222,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 0x04>; + clocks = <&clks 178>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <38 37>; status = "disabled"; @@ -214,6 +232,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 0x04>; + clocks = <&clks 179>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <42 41>; status = "disabled"; @@ -223,6 +242,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 0x04>; + clocks = <&clks 180>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <46 45>; status = "disabled"; @@ -362,24 +382,26 @@ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 0x04>; - status = "disabled"; + clocks = <&clks 0>; }; wdog@020c0000 { /* WDOG2 */ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 0x04>; + clocks = <&clks 0>; status = "disabled"; }; - ccm@020c4000 { + clks: ccm@020c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; }; - anatop@020c8000 { - compatible = "fsl,imx6q-anatop"; + anatop: anatop@020c8000 { + compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; @@ -472,12 +494,14 @@ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; + clocks = <&clks 182>; }; usbphy2: usbphy@020ca000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 0x04>; + clocks = <&clks 183>; }; snvs@020cc000 { @@ -507,6 +531,11 @@ interrupts = <0 89 0x04 0 90 0x04>; }; + gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + }; + iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; @@ -514,86 +543,207 @@ /* shared pinctrl settings */ audmux { pinctrl_audmux_1: audmux-1 { - fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ - 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ - 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ - 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + fsl,pins = < + 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ + 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ + 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ + 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + >; + }; + }; + + enet { + pinctrl_enet_1: enetgrp-1 { + fsl,pins = < + 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */ + 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */ + 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ + 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ + 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ + 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ + 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ + 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ + 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ + 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ + 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ + 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ + 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ + 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ + 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + >; + }; + + pinctrl_enet_2: enetgrp-2 { + fsl,pins = < + 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */ + 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */ + 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ + 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ + 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ + 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ + 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ + 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ + 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ + 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ + 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ + 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ + 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ + 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ + 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + >; }; }; gpmi-nand { pinctrl_gpmi_nand_1: gpmi-nand-1 { - fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ - 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ - 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ - 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ - 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ - 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ - 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ - 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ - 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ - 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ - 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ - 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ - 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ - 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ - 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ - 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ - 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ - 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ - 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + fsl,pins = < + 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ + 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ + 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ + 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ + 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ + 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ + 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ + 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ + 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ + 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ + 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ + 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ + 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ + 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ + 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ + 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ + 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ + 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ + 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + >; }; }; i2c1 { pinctrl_i2c1_1: i2c1grp-1 { - fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ - 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + fsl,pins = < + 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ + 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */ + 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */ + >; }; }; - serial2 { - pinctrl_serial2_1: serial2grp-1 { - fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ - 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */ + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ + 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */ + >; + }; + }; + + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */ + 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */ + >; + }; + }; + + usbotg { + pinctrl_usbotg_1: usbotggrp-1 { + fsl,pins = < + 1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */ + >; + }; + }; + + usdhc2 { + pinctrl_usdhc2_1: usdhc2grp-1 { + fsl,pins = < + 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */ + 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */ + 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */ + 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */ + 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */ + 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */ + 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */ + 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */ + 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */ + 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */ + >; }; }; usdhc3 { pinctrl_usdhc3_1: usdhc3grp-1 { - fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ - 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ - 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ - 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ - 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ - 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ - 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ - 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ - 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ - 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + fsl,pins = < + 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ + 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ + 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ + 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + >; + }; + + pinctrl_usdhc3_2: usdhc3grp-2 { + fsl,pins = < + 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + >; }; }; usdhc4 { pinctrl_usdhc4_1: usdhc4grp-1 { - fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ - 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ - 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ - 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ - 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ - 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ - 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ - 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ - 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ - 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + fsl,pins = < + 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ + 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ + 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ + 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + >; }; - }; - ecspi1 { - pinctrl_ecspi1_1: ecspi1grp-1 { - fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ - 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ - 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + pinctrl_usdhc4_2: usdhc4grp-2 { + fsl,pins = < + 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + >; }; }; }; @@ -612,6 +762,9 @@ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 0x04>; + clocks = <&clks 155>, <&clks 155>; + clock-names = "ipg", "ahb"; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin"; }; }; @@ -635,7 +788,9 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; + clocks = <&clks 162>; fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; @@ -643,7 +798,9 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 0x04>; + clocks = <&clks 162>; fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -651,6 +808,8 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 0x04>; + clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -658,13 +817,24 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 0x04>; + clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks 162>; + }; + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; + clocks = <&clks 117>, <&clks 117>; + clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -677,6 +847,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 0x04>; + clocks = <&clks 163>, <&clks 163>, <&clks 163>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -684,6 +856,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 0x04>; + clocks = <&clks 164>, <&clks 164>, <&clks 164>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -691,6 +865,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 0x04>; + clocks = <&clks 165>, <&clks 165>, <&clks 165>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -698,6 +874,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 0x04>; + clocks = <&clks 166>, <&clks 166>, <&clks 166>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -707,6 +885,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a0000 0x4000>; interrupts = <0 36 0x04>; + clocks = <&clks 125>; status = "disabled"; }; @@ -716,6 +895,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a4000 0x4000>; interrupts = <0 37 0x04>; + clocks = <&clks 126>; status = "disabled"; }; @@ -725,6 +905,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a8000 0x4000>; interrupts = <0 38 0x04>; + clocks = <&clks 127>; status = "disabled"; }; @@ -788,6 +969,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -795,6 +978,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -802,6 +987,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -809,6 +996,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi new file mode 100644 index 0000000..813b91d --- /dev/null +++ b/arch/arm/boot/dts/integrator.dtsi @@ -0,0 +1,76 @@ +/* + * SoC core Device Tree for the ARM Integrator platforms + */ + +/include/ "skeleton.dtsi" + +/ { + timer@13000000 { + reg = <0x13000000 0x100>; + interrupt-parent = <&pic>; + interrupts = <5>; + }; + + timer@13000100 { + reg = <0x13000100 0x100>; + interrupt-parent = <&pic>; + interrupts = <6>; + }; + + timer@13000200 { + reg = <0x13000200 0x100>; + interrupt-parent = <&pic>; + interrupts = <7>; + }; + + pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + }; + + flash@24000000 { + compatible = "cfi-flash"; + reg = <0x24000000 0x02000000>; + }; + + fpga { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&pic>; + + /* + * These PrimeCells are in the same locations and using the + * same interrupts in all Integrators, however the silicon + * version deployed is different. + */ + rtc@15000000 { + reg = <0x15000000 0x1000>; + interrupts = <8>; + }; + + uart@16000000 { + reg = <0x16000000 0x1000>; + interrupts = <1>; + }; + + uart@17000000 { + reg = <0x17000000 0x1000>; + interrupts = <2>; + }; + + kmi@18000000 { + reg = <0x18000000 0x1000>; + interrupts = <3>; + }; + + kmi@19000000 { + reg = <0x19000000 0x1000>; + interrupts = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts new file mode 100644 index 0000000..6176775 --- /dev/null +++ b/arch/arm/boot/dts/integratorap.dts @@ -0,0 +1,68 @@ +/* + * Device Tree for the ARM Integrator/AP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/AP"; + compatible = "arm,integrator-ap"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,integrator-timer"; + }; + + timer1: timer@13000100 { + compatible = "arm,integrator-timer"; + }; + + timer2: timer@13000200 { + compatible = "arm,integrator-timer"; + }; + + pic: pic@14000000 { + valid-mask = <0x003fffff>; + }; + + fpga { + /* + * The Integator/AP predates the idea to have magic numbers + * identifying the PrimeCell in hardware, thus we have to + * supply these from the device tree. + */ + rtc: rtc@15000000 { + compatible = "arm,pl030", "arm,primecell"; + arm,primecell-periphid = <0x00041030>; + }; + + uart0: uart@16000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + }; + + uart1: uart@17000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + }; + + kmi0: kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + }; + + kmi1: kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts new file mode 100644 index 0000000..2dd5e4e --- /dev/null +++ b/arch/arm/boot/dts/integratorcp.dts @@ -0,0 +1,110 @@ +/* + * Device Tree for the ARM Integrator/CP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/CP"; + compatible = "arm,integrator-cp"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer1: timer@13000100 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer2: timer@13000200 { + compatible = "arm,sp804", "arm,primecell"; + }; + + pic: pic@14000000 { + valid-mask = <0x1fc003ff>; + }; + + cic: cic@10000040 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x10000040 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x00000007>; + }; + + sic: sic@ca000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0xca000000 0x100>; + clear-mask = <0x00000fff>; + valid-mask = <0x00000fff>; + }; + + ethernet@c8000000 { + compatible = "smsc,lan91c111"; + reg = <0xc8000000 0x10>; + interrupt-parent = <&pic>; + interrupts = <27>; + }; + + fpga { + /* + * These PrimeCells are at the same location and using + * the same interrupts in all Integrators, but in the CP + * slightly newer versions are deployed. + */ + rtc@15000000 { + compatible = "arm,pl031", "arm,primecell"; + }; + + uart@16000000 { + compatible = "arm,pl011", "arm,primecell"; + }; + + uart@17000000 { + compatible = "arm,pl011", "arm,primecell"; + }; + + kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + }; + + kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + }; + + /* + * These PrimeCells are only available on the Integrator/CP + */ + mmc@1c000000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x1c000000 0x1000>; + interrupts = <23 24>; + max-frequency = <515633>; + }; + + aaci@1d000000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x1d000000 0x1000>; + interrupts = <25>; + }; + + clcd@c0000000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0xC0000000 0x1000>; + interrupts = <22>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 7408655..9b32d02 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -25,6 +25,16 @@ }; }; + gpio_fan { + /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + }; + ocp@f1000000 { sata@80000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts new file mode 100644 index 0000000..08a5824 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -0,0 +1,57 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x0500000 0xfb00000>; + }; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index f8ca6fa..d97cd9d 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -12,7 +12,7 @@ }; chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)"; + bootargs = "console=ttyS0,115200n8 earlyprintk"; linux,initrd-start = <0x4500040>; linux,initrd-end = <0x4800000>; }; @@ -30,7 +30,37 @@ clock-frequency = <200000000>; status = "ok"; }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0xc0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + }; + + partition@100000 { + label = "zImage"; + reg = <0x100000 0x300000>; + }; + + partition@540000 { + label = "initrd"; + reg = <0x540000 0x300000>; + }; + + partition@980000 { + label = "boot"; + reg = <0x980000 0x1f400000>; + }; + }; }; + gpio-leds { compatible = "gpio-leds"; @@ -69,4 +99,22 @@ gpios = <&gpio1 16 0>; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + debounce-interval = <100>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + debounce-interval = <100>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts new file mode 100644 index 0000000..865aeec --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 0>; + linux,default-trigger = "default-on"; + }; + health_led1 { + label = "status:red:health_led"; + gpios = <&gpio1 5 0>; + }; + health_led2 { + label = "status:white:health_led"; + gpios = <&gpio1 4 0>; + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 15 0>; + }; + }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + Power { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio0 14 1>; + }; + Reset { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + }; + OTB { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts new file mode 100644 index 0000000..75bdb93 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -0,0 +1,29 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Keymile Kirkwood Reference Design"; + compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "ok"; + chip-delay = <25>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cef9616..4e5b815 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -14,7 +14,8 @@ ocp@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; @@ -105,5 +106,14 @@ clock-frequency = <100000>; status = "disabled"; }; + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xf5000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 80f74e2..0514fb4 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -26,6 +26,11 @@ interrupt-parent = <&intc>; ranges; + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; + axi@d4200000 { /* AXI */ compatible = "mrvl,axi-bus", "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 45bc4bb..31f2157 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -7,7 +7,7 @@ compatible = "qcom,msm8660-surf", "qcom,msm8660"; interrupt-parent = <&intc>; - intc: interrupt-controller@02080000 { + intc: interrupt-controller@2080000 { compatible = "qcom,msm-8660-qgic"; interrupt-controller; #interrupt-cells = <3>; @@ -15,6 +15,23 @@ < 0x02081000 0x1000 >; }; + timer@2000004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 1 0x301>; + reg = <0x02000004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x40000>; + }; + + timer@2000024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 0 0x301>; + reg = <0x02000024 0x10>, + <0x02000034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x40000>; + }; + serial@19c400000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts new file mode 100644 index 0000000..9e621b5 --- /dev/null +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -0,0 +1,41 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "Qualcomm MSM8960 CDP"; + compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02000000 0x1000 >, + < 0x02002000 0x1000 >; + }; + + timer@200a004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 2 0x301>; + reg = <0x0200a004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x80000>; + }; + + timer@200a024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 1 0x301>; + reg = <0x0200a024 0x10>, + <0x0200a034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x80000>; + }; + + serial@19c400000 { + compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + }; +}; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 25b50b7..77b84e1 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap2.dtsi" +/include/ "omap2420.dtsi" / { model = "TI OMAP2420 H4 board"; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi new file mode 100644 index 0000000..bfd76b4 --- /dev/null +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -0,0 +1,48 @@ +/* + * Device Tree Source for OMAP2420 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2420", "ti,omap2"; + + ocp { + omap2420_pmx: pinmux@48000030 { + compatible = "ti,omap2420-padconf", "pinctrl-single"; + reg = <0x48000030 0x0113>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi new file mode 100644 index 0000000..4565d97 --- /dev/null +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -0,0 +1,92 @@ +/* + * Device Tree Source for OMAP243x SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2430", "ti,omap2"; + + ocp { + omap2430_pmx: pinmux@49002030 { + compatible = "ti,omap2430-padconf", "pinctrl-single"; + reg = <0x49002030 0x0154>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <64>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>, /* RX interrupt */ + <61>; /* RX overflow interrupt */ + interrupt-names = "common", "tx", "rx", "rx_overflow"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@4808c000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808c000 0xff>; + reg-names = "mpu"; + interrupts = <17>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@4808e000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808e000 0xff>; + reg-names = "mpu"; + interrupts = <18>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <19>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index cdcb98c..c38cf76 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -7,16 +7,44 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap36xx.dtsi" / { - model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + model = "TI OMAP3 BeagleBoard xM"; + compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &i2c1 { @@ -27,11 +55,17 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator@10 { + vsim: regulator-vsim { compatible = "ti,twl4030-vsim"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -67,3 +101,15 @@ &mmc3 { status = "disabled"; }; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index f349ee9..e8ba1c2 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -17,6 +17,15 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; }; &i2c1 { @@ -46,3 +55,7 @@ reg = <0x5c>; }; }; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi new file mode 100644 index 0000000..89808ce --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The Gumstix Overo must be combined with an expansion board. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + overo { + label = "overo:blue:COM"; + gpios = <&twl_gpio 19 0>; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +/* i2c2 pins are used for gpio */ +&i2c2 { + status = "disabled"; +}; + +/* on board microSD slot */ +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +/* optional on board WiFi */ +&mmc2 { + bus-width = <4>; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts new file mode 100644 index 0000000..a13d12d --- /dev/null +++ b/arch/arm/boot/dts/omap3-tobi.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/include/ "omap3-overo.dtsi" + +/ { + model = "TI OMAP3 Gumstix Overo on Tobi"; + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "overo:red:gpio21"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 8109471..f38ea87 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,7 +17,6 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; - serial3 = &uart4; }; cpus { @@ -69,6 +68,24 @@ reg = <0x48200000 0x1000>; }; + omap3_pmx_core: pinmux@48002030 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x48002030 0x05cc>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap3_pmx_wkup: pinmux@0x48002a58 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x48002a58 0x5c>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; ti,hwmods = "gpio1"; @@ -141,12 +158,6 @@ clock-frequency = <48000000>; }; - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - i2c1: i2c@48070000 { compatible = "ti,omap3-i2c"; #address-cells = <1>; @@ -220,5 +231,74 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@49022000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49022000 0xff>, + <0x49028000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <17>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>, /* RX interrupt */ + <4>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <1280>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@49024000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49024000 0xff>, + <0x4902a000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <22>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>, /* RX interrupt */ + <5>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@49026000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49026000 0xff>; + reg-names = "mpu"; + interrupts = <23>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <27>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi new file mode 100644 index 0000000..96bf028 --- /dev/null +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 9880c12..20b966e 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 PandaBoard"; @@ -126,3 +127,13 @@ ti,non-removable; bus-width = <4>; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 72216e9..94a23b3 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 SDP board"; @@ -18,7 +19,7 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - vdd_eth: fixedregulator@0 { + vdd_eth: fixedregulator-vdd-eth { compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -28,7 +29,7 @@ regulator-boot-on; }; - vbat: fixedregulator@2 { + vbat: fixedregulator-vbat { compatible = "regulator-fixed"; regulator-name = "VBAT"; regulator-min-microvolt = <3750000>; @@ -115,6 +116,33 @@ }; }; +&omap4_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ + 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */ + 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */ + 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */ + 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */ + 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */ + 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */ + 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ + >; + }; +}; + &i2c1 { clock-frequency = <400000>; @@ -226,3 +254,98 @@ bus-width = <4>; ti,non-removable; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00000012 /* KEY_E */ + 0x00010013 /* KEY_R */ + 0x00020014 /* KEY_T */ + 0x00030066 /* KEY_HOME */ + 0x0004003f /* KEY_F5 */ + 0x000500f0 /* KEY_UNKNOWN */ + 0x00060017 /* KEY_I */ + 0x0007002a /* KEY_LEFTSHIFT */ + 0x01000020 /* KEY_D*/ + 0x01010021 /* KEY_F */ + 0x01020022 /* KEY_G */ + 0x010300e7 /* KEY_SEND */ + 0x01040040 /* KEY_F6 */ + 0x010500f0 /* KEY_UNKNOWN */ + 0x01060025 /* KEY_K */ + 0x0107001c /* KEY_ENTER */ + 0x0200002d /* KEY_X */ + 0x0201002e /* KEY_C */ + 0x0202002f /* KEY_V */ + 0x0203006b /* KEY_END */ + 0x02040041 /* KEY_F7 */ + 0x020500f0 /* KEY_UNKNOWN */ + 0x02060034 /* KEY_DOT */ + 0x0207003a /* KEY_CAPSLOCK */ + 0x0300002c /* KEY_Z */ + 0x0301004e /* KEY_KPLUS */ + 0x03020030 /* KEY_B */ + 0x0303003b /* KEY_F1 */ + 0x03040042 /* KEY_F8 */ + 0x030500f0 /* KEY_UNKNOWN */ + 0x03060018 /* KEY_O */ + 0x03070039 /* KEY_SPACE */ + 0x04000011 /* KEY_W */ + 0x04010015 /* KEY_Y */ + 0x04020016 /* KEY_U */ + 0x0403003c /* KEY_F2 */ + 0x04040073 /* KEY_VOLUMEUP */ + 0x040500f0 /* KEY_UNKNOWN */ + 0x04060026 /* KEY_L */ + 0x04070069 /* KEY_LEFT */ + 0x0500001f /* KEY_S */ + 0x05010023 /* KEY_H */ + 0x05020024 /* KEY_J */ + 0x0503003d /* KEY_F3 */ + 0x05040043 /* KEY_F9 */ + 0x05050072 /* KEY_VOLUMEDOWN */ + 0x05060032 /* KEY_M */ + 0x0507006a /* KEY_RIGHT */ + 0x06000010 /* KEY_Q */ + 0x0601001e /* KEY_A */ + 0x06020031 /* KEY_N */ + 0x0603009e /* KEY_BACK */ + 0x0604000e /* KEY_BACKSPACE */ + 0x060500f0 /* KEY_UNKNOWN */ + 0x06060019 /* KEY_P */ + 0x06070067 /* KEY_UP */ + 0x07000094 /* KEY_PROG1 */ + 0x07010095 /* KEY_PROG2 */ + 0x070200ca /* KEY_PROG3 */ + 0x070300cb /* KEY_PROG4 */ + 0x0704003e /* KEY_F4 */ + 0x070500f0 /* KEY_UNKNOWN */ + 0x07060160 /* KEY_OK */ + 0x0707006c>; /* KEY_DOWN */ + linux,input-no-autorepeat; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 04cbbcb..3883f94 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -30,12 +30,35 @@ cpus { cpu@0 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; }; + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + + L2: l2-cache-controller@48242000 { + compatible = "arm,pl310-cache"; + reg = <0x48242000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + local-timer@0x48240600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x48240600 0x20>; + interrupts = <1 13 0x304>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -61,30 +84,6 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * - * MPU -+-- MPU_PRIVATE - GIC, L2 - * | - * +----------------+----------+ - * | | | - * + +- EMIF - DDR | - * | | | - * | + +--------+ - * | | | - * | +- L4_ABE - AESS, MCBSP, TIMERs... - * | | - * +- L3_MAIN --+- L4_CORE - IPs... - * | - * +- L4_PER - IPs... - * | - * +- L4_CFG -+- L4_WKUP - IPs... - * | | - * | +- IPs... - * +- IPU ----+ - * | | - * +- DSP ----+ - * | | - * +- DSS ----+ - * * Since that will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. @@ -96,16 +95,27 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - gic: interrupt-controller@48241000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48241000 0x1000>, - <0x48240100 0x0100>; + omap4_pmx_core: pinmux@4a100040 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + omap4_pmx_wkup: pinmux@4a31e040 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a31e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; }; gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; + reg = <0x4a310000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -115,6 +125,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -124,6 +136,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -133,6 +147,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -142,6 +158,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -151,6 +169,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -160,30 +180,40 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -191,6 +221,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -198,6 +230,8 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -205,6 +239,8 @@ i2c4: i2c@48350000 { compatible = "ti,omap4-i2c"; + reg = <0x48350000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -212,6 +248,8 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <0 65 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -220,6 +258,8 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <0 66 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -228,6 +268,8 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <0 91 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -236,6 +278,8 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <0 48 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -244,6 +288,8 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -251,30 +297,40 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; wdt2: wdt@4a314000 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x4a314000 0x80>; + interrupts = <0 80 0x4>; ti,hwmods = "wd_timer2"; }; @@ -282,6 +338,7 @@ compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; @@ -291,9 +348,95 @@ compatible = "ti,omap4-dmic"; reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@48096000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x48096000 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <0 16 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + keypad: keypad@4a31c000 { + compatible = "ti,omap4-keypad"; + reg = <0x4a31c000 0x80>; + interrupts = <0 120 0x4>; + reg-names = "mpu"; + ti,hwmods = "kbd"; + }; + + emif1: emif@4c000000 { + compatible = "ti,emif-4d"; + reg = <0x4c000000 0x100>; + interrupts = <0 110 0x4>; + ti,hwmods = "emif1"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@4d000000 { + compatible = "ti,emif-4d"; + reg = <0x4d000000 0x100>; + interrupts = <0 111 0x4>; + ti,hwmods = "emif2"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + ocp2scp { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp_usb_phy"; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 200c39a..9c41a3f 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -17,4 +17,68 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + bus-width = <4>; + ti,non-removable; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <400000>; + + /* Pressure Sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + /* Temperature Sensor */ + tmp102@48{ + compatible = "ti,tmp102"; + reg = <0x48>; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x02020073 /* VOLUP */ + 0x02030072 /* VOLDOWM */ + 0x020400e7 /* SEND */ + 0x02050066 /* HOME */ + 0x0206006b /* END */ + 0x020700d9>; /* SEARCH */ + linux,input-no-autorepeat; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 57e5270..5db33f4 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -33,9 +33,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + /* 14th PPI IRQ, active low level-sensitive */ + interrupts = <1 14 0x308>; + clock-frequency = <6144000>; + }; }; cpu@1 { compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + /* 14th PPI IRQ, active low level-sensitive */ + interrupts = <1 14 0x308>; + clock-frequency = <6144000>; + }; }; }; @@ -145,6 +157,41 @@ #interrupt-cells = <1>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + + i2c4: i2c@4807A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + }; + + i2c5: i2c@4807C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; @@ -180,5 +227,97 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + }; + + mmc5: mmc@480d5000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc5"; + ti,needs-special-reset; + }; + + keypad: keypad@4ae1c000 { + compatible = "ti,omap4-keypad"; + ti,hwmods = "kbd"; + }; + + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; }; }; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index 802ec5b..90fdbd7 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -135,13 +135,11 @@ ssp0: ssp@20084000 { #address-cells = <1>; #size-cells = <0>; - pl022,num-chipselects = <1>; + num-cs = <1>; cs-gpios = <&gpio 3 5 0>; eeprom: at25@0 { - pl022,hierarchy = <0>; pl022,interface = <0>; - pl022,slave-tx-disable = <0>; pl022,com-mode = <0>; pl022,rx-level-trig = <1>; pl022,tx-level-trig = <1>; @@ -191,16 +189,14 @@ leds { compatible = "gpio-leds"; - led0 { - gpios = <&gpio 5 1 1>; /* GPO_P3 1, GPIO 80, active low */ - linux,default-trigger = "heartbeat"; + led0 { /* red */ + gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */ default-state = "off"; }; - led1 { - gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */ - linux,default-trigger = "timer"; - default-state = "off"; + led1 { /* green */ + gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */ + linux,default-trigger = "heartbeat"; }; }; }; diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts deleted file mode 100644 index 34ae3a6..0000000 --- a/arch/arm/boot/dts/prima2-cb.dts +++ /dev/null @@ -1,424 +0,0 @@ -/dts-v1/; -/ { - model = "SiRF Prima2 eVB"; - compatible = "sirf,prima2-cb", "sirf,prima2"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - memory { - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1"; - linux,stdout-path = &uart1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - /* from bootloader */ - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - }; - }; - - axi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x40000000 0x40000000 0x80000000>; - - l2-cache-controller@80040000 { - compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; - reg = <0x80040000 0x1000>; - interrupts = <59>; - arm,tag-latency = <1 1 1>; - arm,data-latency = <1 1 1>; - arm,filter-ranges = <0 0x40000000>; - }; - - intc: interrupt-controller@80020000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "sirf,prima2-intc"; - reg = <0x80020000 0x1000>; - }; - - sys-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x88000000 0x88000000 0x40000>; - - clock-controller@88000000 { - compatible = "sirf,prima2-clkc"; - reg = <0x88000000 0x1000>; - interrupts = <3>; - }; - - reset-controller@88010000 { - compatible = "sirf,prima2-rstc"; - reg = <0x88010000 0x1000>; - }; - - rsc-controller@88020000 { - compatible = "sirf,prima2-rsc"; - reg = <0x88020000 0x1000>; - }; - }; - - mem-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90000000 0x90000000 0x10000>; - - memory-controller@90000000 { - compatible = "sirf,prima2-memc"; - reg = <0x90000000 0x10000>; - interrupts = <27>; - }; - }; - - disp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90010000 0x90010000 0x30000>; - - display@90010000 { - compatible = "sirf,prima2-lcd"; - reg = <0x90010000 0x20000>; - interrupts = <30>; - }; - - vpp@90020000 { - compatible = "sirf,prima2-vpp"; - reg = <0x90020000 0x10000>; - interrupts = <31>; - }; - }; - - graphics-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x98000000 0x98000000 0x8000000>; - - graphics@98000000 { - compatible = "powervr,sgx531"; - reg = <0x98000000 0x8000000>; - interrupts = <6>; - }; - }; - - multimedia-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa0000000 0xa0000000 0x8000000>; - - multimedia@a0000000 { - compatible = "sirf,prima2-video-codec"; - reg = <0xa0000000 0x8000000>; - interrupts = <5>; - }; - }; - - dsp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa8000000 0xa8000000 0x2000000>; - - dspif@a8000000 { - compatible = "sirf,prima2-dspif"; - reg = <0xa8000000 0x10000>; - interrupts = <9>; - }; - - gps@a8010000 { - compatible = "sirf,prima2-gps"; - reg = <0xa8010000 0x10000>; - interrupts = <7>; - }; - - dsp@a9000000 { - compatible = "sirf,prima2-dsp"; - reg = <0xa9000000 0x1000000>; - interrupts = <8>; - }; - }; - - peri-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb0000000 0xb0000000 0x180000>; - - timer@b0020000 { - compatible = "sirf,prima2-tick"; - reg = <0xb0020000 0x1000>; - interrupts = <0>; - }; - - nand@b0030000 { - compatible = "sirf,prima2-nand"; - reg = <0xb0030000 0x10000>; - interrupts = <41>; - }; - - audio@b0040000 { - compatible = "sirf,prima2-audio"; - reg = <0xb0040000 0x10000>; - interrupts = <35>; - }; - - uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x10000>; - interrupts = <17>; - }; - - uart1: uart@b0060000 { - cell-index = <1>; - compatible = "sirf,prima2-uart"; - reg = <0xb0060000 0x10000>; - interrupts = <18>; - }; - - uart2: uart@b0070000 { - cell-index = <2>; - compatible = "sirf,prima2-uart"; - reg = <0xb0070000 0x10000>; - interrupts = <19>; - }; - - usp0: usp@b0080000 { - cell-index = <0>; - compatible = "sirf,prima2-usp"; - reg = <0xb0080000 0x10000>; - interrupts = <20>; - }; - - usp1: usp@b0090000 { - cell-index = <1>; - compatible = "sirf,prima2-usp"; - reg = <0xb0090000 0x10000>; - interrupts = <21>; - }; - - usp2: usp@b00a0000 { - cell-index = <2>; - compatible = "sirf,prima2-usp"; - reg = <0xb00a0000 0x10000>; - interrupts = <22>; - }; - - dmac0: dma-controller@b00b0000 { - cell-index = <0>; - compatible = "sirf,prima2-dmac"; - reg = <0xb00b0000 0x10000>; - interrupts = <12>; - }; - - dmac1: dma-controller@b0160000 { - cell-index = <1>; - compatible = "sirf,prima2-dmac"; - reg = <0xb0160000 0x10000>; - interrupts = <13>; - }; - - vip@b00C0000 { - compatible = "sirf,prima2-vip"; - reg = <0xb00C0000 0x10000>; - }; - - spi0: spi@b00d0000 { - cell-index = <0>; - compatible = "sirf,prima2-spi"; - reg = <0xb00d0000 0x10000>; - interrupts = <15>; - }; - - spi1: spi@b0170000 { - cell-index = <1>; - compatible = "sirf,prima2-spi"; - reg = <0xb0170000 0x10000>; - interrupts = <16>; - }; - - i2c0: i2c@b00e0000 { - cell-index = <0>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00e0000 0x10000>; - interrupts = <24>; - }; - - i2c1: i2c@b00f0000 { - cell-index = <1>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00f0000 0x10000>; - interrupts = <25>; - }; - - tsc@b0110000 { - compatible = "sirf,prima2-tsc"; - reg = <0xb0110000 0x10000>; - interrupts = <33>; - }; - - gpio: gpio-controller@b0120000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,prima2-gpio-pinmux"; - reg = <0xb0120000 0x10000>; - gpio-controller; - interrupt-controller; - }; - - pwm@b0130000 { - compatible = "sirf,prima2-pwm"; - reg = <0xb0130000 0x10000>; - }; - - efusesys@b0140000 { - compatible = "sirf,prima2-efuse"; - reg = <0xb0140000 0x10000>; - }; - - pulsec@b0150000 { - compatible = "sirf,prima2-pulsec"; - reg = <0xb0150000 0x10000>; - interrupts = <48>; - }; - - pci-iobg { - compatible = "sirf,prima2-pciiobg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x56000000 0x56000000 0x1b00000>; - - sd0: sdhci@56000000 { - cell-index = <0>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56000000 0x100000>; - interrupts = <38>; - }; - - sd1: sdhci@56100000 { - cell-index = <1>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56100000 0x100000>; - interrupts = <38>; - }; - - sd2: sdhci@56200000 { - cell-index = <2>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56200000 0x100000>; - interrupts = <23>; - }; - - sd3: sdhci@56300000 { - cell-index = <3>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56300000 0x100000>; - interrupts = <23>; - }; - - sd4: sdhci@56400000 { - cell-index = <4>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56400000 0x100000>; - interrupts = <39>; - }; - - sd5: sdhci@56500000 { - cell-index = <5>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56500000 0x100000>; - interrupts = <39>; - }; - - pci-copy@57900000 { - compatible = "sirf,prima2-pcicp"; - reg = <0x57900000 0x100000>; - interrupts = <40>; - }; - - rom-interface@57a00000 { - compatible = "sirf,prima2-romif"; - reg = <0x57a00000 0x100000>; - }; - }; - }; - - rtc-iobg { - compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80030000 0x10000>; - - gpsrtc@1000 { - compatible = "sirf,prima2-gpsrtc"; - reg = <0x1000 0x1000>; - interrupts = <55 56 57>; - }; - - sysrtc@2000 { - compatible = "sirf,prima2-sysrtc"; - reg = <0x2000 0x1000>; - interrupts = <52 53 54>; - }; - - pwrc@3000 { - compatible = "sirf,prima2-pwrc"; - reg = <0x3000 0x1000>; - interrupts = <32>; - }; - }; - - uus-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb8000000 0xb8000000 0x40000>; - - usb0: usb@b00e0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8000000 0x10000>; - interrupts = <10>; - }; - - usb1: usb@b00f0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8010000 0x10000>; - interrupts = <11>; - }; - - sata@b00f0000 { - compatible = "synopsys,dwc-ahsata"; - reg = <0xb8020000 0x10000>; - interrupts = <37>; - }; - - security@b00f0000 { - compatible = "sirf,prima2-security"; - reg = <0xb8030000 0x10000>; - interrupts = <42>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts new file mode 100644 index 0000000..57286b4 --- /dev/null +++ b/arch/arm/boot/dts/prima2-evb.dts @@ -0,0 +1,37 @@ +/* + * DTS file for CSR SiRFprimaII Evaluation Board + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "prima2.dtsi" + +/ { + model = "CSR SiRFprimaII Evaluation Board"; + compatible = "sirf,prima2", "sirf,prima2-cb"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + axi { + peri-iobg { + uart@b0060000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + }; + spi@b00d0000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + }; + spi@b0170000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi new file mode 100644 index 0000000..055fca5 --- /dev/null +++ b/arch/arm/boot/dts/prima2.dtsi @@ -0,0 +1,640 @@ +/* + * DTS file for CSR SiRFprimaII SoC + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,prima2"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* from bootloader */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0x80000000>; + + l2-cache-controller@80040000 { + compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; + reg = <0x80040000 0x1000>; + interrupts = <59>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; + arm,filter-ranges = <0 0x40000000>; + }; + + intc: interrupt-controller@80020000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "sirf,prima2-intc"; + reg = <0x80020000 0x1000>; + }; + + sys-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x88000000 0x88000000 0x40000>; + + clock-controller@88000000 { + compatible = "sirf,prima2-clkc"; + reg = <0x88000000 0x1000>; + interrupts = <3>; + }; + + reset-controller@88010000 { + compatible = "sirf,prima2-rstc"; + reg = <0x88010000 0x1000>; + }; + + rsc-controller@88020000 { + compatible = "sirf,prima2-rsc"; + reg = <0x88020000 0x1000>; + }; + }; + + mem-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90000000 0x90000000 0x10000>; + + memory-controller@90000000 { + compatible = "sirf,prima2-memc"; + reg = <0x90000000 0x10000>; + interrupts = <27>; + }; + }; + + disp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90010000 0x90010000 0x30000>; + + display@90010000 { + compatible = "sirf,prima2-lcd"; + reg = <0x90010000 0x20000>; + interrupts = <30>; + }; + + vpp@90020000 { + compatible = "sirf,prima2-vpp"; + reg = <0x90020000 0x10000>; + interrupts = <31>; + }; + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x98000000 0x98000000 0x8000000>; + + graphics@98000000 { + compatible = "powervr,sgx531"; + reg = <0x98000000 0x8000000>; + interrupts = <6>; + }; + }; + + multimedia-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa0000000 0xa0000000 0x8000000>; + + multimedia@a0000000 { + compatible = "sirf,prima2-video-codec"; + reg = <0xa0000000 0x8000000>; + interrupts = <5>; + }; + }; + + dsp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa8000000 0xa8000000 0x2000000>; + + dspif@a8000000 { + compatible = "sirf,prima2-dspif"; + reg = <0xa8000000 0x10000>; + interrupts = <9>; + }; + + gps@a8010000 { + compatible = "sirf,prima2-gps"; + reg = <0xa8010000 0x10000>; + interrupts = <7>; + }; + + dsp@a9000000 { + compatible = "sirf,prima2-dsp"; + reg = <0xa9000000 0x1000000>; + interrupts = <8>; + }; + }; + + peri-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0xb0000000 0x180000>; + + timer@b0020000 { + compatible = "sirf,prima2-tick"; + reg = <0xb0020000 0x1000>; + interrupts = <0>; + }; + + nand@b0030000 { + compatible = "sirf,prima2-nand"; + reg = <0xb0030000 0x10000>; + interrupts = <41>; + }; + + audio@b0040000 { + compatible = "sirf,prima2-audio"; + reg = <0xb0040000 0x10000>; + interrupts = <35>; + }; + + uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x10000>; + interrupts = <17>; + }; + + uart1: uart@b0060000 { + cell-index = <1>; + compatible = "sirf,prima2-uart"; + reg = <0xb0060000 0x10000>; + interrupts = <18>; + }; + + uart2: uart@b0070000 { + cell-index = <2>; + compatible = "sirf,prima2-uart"; + reg = <0xb0070000 0x10000>; + interrupts = <19>; + }; + + usp0: usp@b0080000 { + cell-index = <0>; + compatible = "sirf,prima2-usp"; + reg = <0xb0080000 0x10000>; + interrupts = <20>; + }; + + usp1: usp@b0090000 { + cell-index = <1>; + compatible = "sirf,prima2-usp"; + reg = <0xb0090000 0x10000>; + interrupts = <21>; + }; + + usp2: usp@b00a0000 { + cell-index = <2>; + compatible = "sirf,prima2-usp"; + reg = <0xb00a0000 0x10000>; + interrupts = <22>; + }; + + dmac0: dma-controller@b00b0000 { + cell-index = <0>; + compatible = "sirf,prima2-dmac"; + reg = <0xb00b0000 0x10000>; + interrupts = <12>; + }; + + dmac1: dma-controller@b0160000 { + cell-index = <1>; + compatible = "sirf,prima2-dmac"; + reg = <0xb0160000 0x10000>; + interrupts = <13>; + }; + + vip@b00C0000 { + compatible = "sirf,prima2-vip"; + reg = <0xb00C0000 0x10000>; + }; + + spi0: spi@b00d0000 { + cell-index = <0>; + compatible = "sirf,prima2-spi"; + reg = <0xb00d0000 0x10000>; + interrupts = <15>; + }; + + spi1: spi@b0170000 { + cell-index = <1>; + compatible = "sirf,prima2-spi"; + reg = <0xb0170000 0x10000>; + interrupts = <16>; + }; + + i2c0: i2c@b00e0000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00e0000 0x10000>; + interrupts = <24>; + }; + + i2c1: i2c@b00f0000 { + cell-index = <1>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00f0000 0x10000>; + interrupts = <25>; + }; + + tsc@b0110000 { + compatible = "sirf,prima2-tsc"; + reg = <0xb0110000 0x10000>; + interrupts = <33>; + }; + + gpio: pinctrl@b0120000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,prima2-pinctrl"; + reg = <0xb0120000 0x10000>; + interrupts = <43 44 45 46 47>; + gpio-controller; + interrupt-controller; + + lcd_16pins_a: lcd0@0 { + lcd { + sirf,pins = "lcd_16bitsgrp"; + sirf,function = "lcd_16bits"; + }; + }; + lcd_18pins_a: lcd0@1 { + lcd { + sirf,pins = "lcd_18bitsgrp"; + sirf,function = "lcd_18bits"; + }; + }; + lcd_24pins_a: lcd0@2 { + lcd { + sirf,pins = "lcd_24bitsgrp"; + sirf,function = "lcd_24bits"; + }; + }; + lcdrom_pins_a: lcdrom0@0 { + lcd { + sirf,pins = "lcdromgrp"; + sirf,function = "lcdrom"; + }; + }; + uart0_pins_a: uart0@0 { + uart { + sirf,pins = "uart0grp"; + sirf,function = "uart0"; + }; + }; + uart1_pins_a: uart1@0 { + uart { + sirf,pins = "uart1grp"; + sirf,function = "uart1"; + }; + }; + uart2_pins_a: uart2@0 { + uart { + sirf,pins = "uart2grp"; + sirf,function = "uart2"; + }; + }; + uart2_noflow_pins_a: uart2@1 { + uart { + sirf,pins = "uart2_nostreamctrlgrp"; + sirf,function = "uart2_nostreamctrl"; + }; + }; + spi0_pins_a: spi0@0 { + spi { + sirf,pins = "spi0grp"; + sirf,function = "spi0"; + }; + }; + spi1_pins_a: spi1@0 { + spi { + sirf,pins = "spi1grp"; + sirf,function = "spi1"; + }; + }; + i2c0_pins_a: i2c0@0 { + i2c { + sirf,pins = "i2c0grp"; + sirf,function = "i2c0"; + }; + }; + i2c1_pins_a: i2c1@0 { + i2c { + sirf,pins = "i2c1grp"; + sirf,function = "i2c1"; + }; + }; + pwm0_pins_a: pwm0@0 { + pwm { + sirf,pins = "pwm0grp"; + sirf,function = "pwm0"; + }; + }; + pwm1_pins_a: pwm1@0 { + pwm { + sirf,pins = "pwm1grp"; + sirf,function = "pwm1"; + }; + }; + pwm2_pins_a: pwm2@0 { + pwm { + sirf,pins = "pwm2grp"; + sirf,function = "pwm2"; + }; + }; + pwm3_pins_a: pwm3@0 { + pwm { + sirf,pins = "pwm3grp"; + sirf,function = "pwm3"; + }; + }; + gps_pins_a: gps@0 { + gps { + sirf,pins = "gpsgrp"; + sirf,function = "gps"; + }; + }; + vip_pins_a: vip@0 { + vip { + sirf,pins = "vipgrp"; + sirf,function = "vip"; + }; + }; + sdmmc0_pins_a: sdmmc0@0 { + sdmmc0 { + sirf,pins = "sdmmc0grp"; + sirf,function = "sdmmc0"; + }; + }; + sdmmc1_pins_a: sdmmc1@0 { + sdmmc1 { + sirf,pins = "sdmmc1grp"; + sirf,function = "sdmmc1"; + }; + }; + sdmmc2_pins_a: sdmmc2@0 { + sdmmc2 { + sirf,pins = "sdmmc2grp"; + sirf,function = "sdmmc2"; + }; + }; + sdmmc3_pins_a: sdmmc3@0 { + sdmmc3 { + sirf,pins = "sdmmc3grp"; + sirf,function = "sdmmc3"; + }; + }; + sdmmc4_pins_a: sdmmc4@0 { + sdmmc4 { + sirf,pins = "sdmmc4grp"; + sirf,function = "sdmmc4"; + }; + }; + sdmmc5_pins_a: sdmmc5@0 { + sdmmc5 { + sirf,pins = "sdmmc5grp"; + sirf,function = "sdmmc5"; + }; + }; + i2s_pins_a: i2s@0 { + i2s { + sirf,pins = "i2sgrp"; + sirf,function = "i2s"; + }; + }; + ac97_pins_a: ac97@0 { + ac97 { + sirf,pins = "ac97grp"; + sirf,function = "ac97"; + }; + }; + nand_pins_a: nand@0 { + nand { + sirf,pins = "nandgrp"; + sirf,function = "nand"; + }; + }; + usp0_pins_a: usp0@0 { + usp0 { + sirf,pins = "usp0grp"; + sirf,function = "usp0"; + }; + }; + usp1_pins_a: usp1@0 { + usp1 { + sirf,pins = "usp1grp"; + sirf,function = "usp1"; + }; + }; + usp2_pins_a: usp2@0 { + usp2 { + sirf,pins = "usp2grp"; + sirf,function = "usp2"; + }; + }; + usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 { + usb0_utmi_drvbus { + sirf,pins = "usb0_utmi_drvbusgrp"; + sirf,function = "usb0_utmi_drvbus"; + }; + }; + usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 { + usb1_utmi_drvbus { + sirf,pins = "usb1_utmi_drvbusgrp"; + sirf,function = "usb1_utmi_drvbus"; + }; + }; + warm_rst_pins_a: warm_rst@0 { + warm_rst { + sirf,pins = "warm_rstgrp"; + sirf,function = "warm_rst"; + }; + }; + pulse_count_pins_a: pulse_count@0 { + pulse_count { + sirf,pins = "pulse_countgrp"; + sirf,function = "pulse_count"; + }; + }; + cko0_rst_pins_a: cko0_rst@0 { + cko0_rst { + sirf,pins = "cko0_rstgrp"; + sirf,function = "cko0_rst"; + }; + }; + cko1_rst_pins_a: cko1_rst@0 { + cko1_rst { + sirf,pins = "cko1_rstgrp"; + sirf,function = "cko1_rst"; + }; + }; + }; + + pwm@b0130000 { + compatible = "sirf,prima2-pwm"; + reg = <0xb0130000 0x10000>; + }; + + efusesys@b0140000 { + compatible = "sirf,prima2-efuse"; + reg = <0xb0140000 0x10000>; + }; + + pulsec@b0150000 { + compatible = "sirf,prima2-pulsec"; + reg = <0xb0150000 0x10000>; + interrupts = <48>; + }; + + pci-iobg { + compatible = "sirf,prima2-pciiobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56000000 0x56000000 0x1b00000>; + + sd0: sdhci@56000000 { + cell-index = <0>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56000000 0x100000>; + interrupts = <38>; + }; + + sd1: sdhci@56100000 { + cell-index = <1>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56100000 0x100000>; + interrupts = <38>; + }; + + sd2: sdhci@56200000 { + cell-index = <2>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56200000 0x100000>; + interrupts = <23>; + }; + + sd3: sdhci@56300000 { + cell-index = <3>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56300000 0x100000>; + interrupts = <23>; + }; + + sd4: sdhci@56400000 { + cell-index = <4>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56400000 0x100000>; + interrupts = <39>; + }; + + sd5: sdhci@56500000 { + cell-index = <5>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56500000 0x100000>; + interrupts = <39>; + }; + + pci-copy@57900000 { + compatible = "sirf,prima2-pcicp"; + reg = <0x57900000 0x100000>; + interrupts = <40>; + }; + + rom-interface@57a00000 { + compatible = "sirf,prima2-romif"; + reg = <0x57a00000 0x100000>; + }; + }; + }; + + rtc-iobg { + compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80030000 0x10000>; + + gpsrtc@1000 { + compatible = "sirf,prima2-gpsrtc"; + reg = <0x1000 0x1000>; + interrupts = <55 56 57>; + }; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; + + pwrc@3000 { + compatible = "sirf,prima2-pwrc"; + reg = <0x3000 0x1000>; + interrupts = <32>; + }; + }; + + uus-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb8000000 0xb8000000 0x40000>; + + usb0: usb@b00e0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8000000 0x10000>; + interrupts = <10>; + }; + + usb1: usb@b00f0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8010000 0x10000>; + interrupts = <11>; + }; + + sata@b00f0000 { + compatible = "synopsys,dwc-ahsata"; + reg = <0xb8020000 0x10000>; + interrupts = <37>; + }; + + security@b00f0000 { + compatible = "sirf,prima2-security"; + reg = <0xb8030000 0x10000>; + interrupts = <42>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi new file mode 100644 index 0000000..d7c5d72 --- /dev/null +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -0,0 +1,14 @@ +/* The pxa3xx skeleton simply augments the 2xx version */ +/include/ "pxa2xx.dtsi" + +/ { + model = "Marvell PXA27x familiy SoC"; + compatible = "marvell,pxa27x"; + + pxabus { + pxairq: interrupt-controller@40d00000 { + marvell,intc-priority; + marvell,intc-nr-irqs = <34>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi new file mode 100644 index 0000000..f18aad3 --- /dev/null +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -0,0 +1,132 @@ +/* + * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell PXA2xx family SoC"; + compatible = "marvell,pxa2xx"; + interrupt-parent = <&pxairq>; + + aliases { + serial0 = &ffuart; + serial1 = &btuart; + serial2 = &stuart; + serial3 = &hwuart; + i2c0 = &pwri2c; + i2c1 = &pxai2c1; + }; + + cpus { + cpu@0 { + compatible = "arm,xscale"; + }; + }; + + pxabus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pxairq: interrupt-controller@40d00000 { + #interrupt-cells = <1>; + compatible = "marvell,pxa-intc"; + interrupt-controller; + interrupt-parent; + marvell,intc-nr-irqs = <32>; + reg = <0x40d00000 0xd0>; + }; + + gpio: gpio@40e00000 { + compatible = "mrvl,pxa-gpio"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x40e00000 0x10000>; + gpio-controller; + #gpio-cells = <0x2>; + interrupts = <10>; + interrupt-names = "gpio_mux"; + interrupt-controller; + #interrupt-cells = <0x2>; + ranges; + + gcb0: gpio@40e00000 { + reg = <0x40e00000 0x4>; + }; + + gcb1: gpio@40e00004 { + reg = <0x40e00004 0x4>; + }; + + gcb2: gpio@40e00008 { + reg = <0x40e00008 0x4>; + }; + gcb3: gpio@40e0000c { + reg = <0x40e0000c 0x4>; + }; + }; + + ffuart: uart@40100000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40100000 0x30>; + interrupts = <22>; + status = "disabled"; + }; + + btuart: uart@40200000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40200000 0x30>; + interrupts = <21>; + status = "disabled"; + }; + + stuart: uart@40700000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40700000 0x30>; + interrupts = <20>; + status = "disabled"; + }; + + hwuart: uart@41100000 { + compatible = "mrvl,pxa-uart"; + reg = <0x41100000 0x30>; + interrupts = <7>; + status = "disabled"; + }; + + pxai2c1: i2c@40301680 { + compatible = "mrvl,pxa-i2c"; + reg = <0x40301680 0x30>; + interrupts = <18>; + #address-cells = <0x1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb0: ohci@4c000000 { + compatible = "mrvl,pxa-ohci"; + reg = <0x4c000000 0x10000>; + interrupts = <3>; + status = "disabled"; + }; + + mmc0: mmc@41100000 { + compatible = "mrvl,pxa-mmc"; + reg = <0x41100000 0x1000>; + interrupts = <23>; + status = "disabled"; + }; + + rtc@40900000 { + compatible = "marvell,pxa-rtc"; + reg = <0x40900000 0x3c>; + interrupts = <30 31>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi new file mode 100644 index 0000000..f9d92da --- /dev/null +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -0,0 +1,32 @@ +/* The pxa3xx skeleton simply augments the 2xx version */ +/include/ "pxa2xx.dtsi" + +/ { + model = "Marvell PXA3xx familiy SoC"; + compatible = "marvell,pxa3xx"; + + pxabus { + pwri2c: i2c@40f500c0 { + compatible = "mrvl,pwri2c"; + reg = <0x40f500c0 0x30>; + interrupts = <6>; + #address-cells = <0x1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + pxairq: interrupt-controller@40d00000 { + marvell,intc-priority; + marvell,intc-nr-irqs = <56>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts index e92be5a..595492a 100644 --- a/arch/arm/boot/dts/pxa910-dkb.dts +++ b/arch/arm/boot/dts/pxa910-dkb.dts @@ -29,6 +29,143 @@ }; twsi1: i2c@d4011000 { status = "okay"; + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; + }; + }; + }; }; rtc: rtc@d4010000 { status = "okay"; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index aebf32d..825aaca 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -25,6 +25,11 @@ interrupt-parent = <&intc>; ranges; + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; + axi@d4200000 { /* AXI */ compatible = "mrvl,axi-bus", "simple-bus"; #address-cells = <1>; @@ -115,6 +120,8 @@ twsi1: i2c@d4011000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; @@ -123,6 +130,8 @@ twsi2: i2c@d4037000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4037000 0x1000>; interrupts = <54>; status = "disabled"; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 7e334d4..702c0ba 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "db8500.dtsi" +/include/ "dbx5x0.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -83,6 +83,22 @@ }; soc-u9500 { + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + external-bus@50000000 { status = "okay"; @@ -111,7 +127,6 @@ mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; - #gpio-cells = <1>; cd-gpios = <&gpio6 26 0x4>; // 218 cd-inverted; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index f146dbf..c3ef1ad 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -275,6 +275,160 @@ i2c@7000d000 { status = "okay"; clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo0"; + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; pmc { @@ -310,6 +464,72 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&pmic 2 0>; + enable-active-high; + /* Hack until board-harmony-pcie.c is removed */ + status = "disabled"; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 22 0>; /* gpio PC6 */ + enable-active-high; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 176 0>; /* gpio PW0 */ + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-harmony", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts new file mode 100644 index 0000000..a2d6d65 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -0,0 +1,58 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Medcom-Wide board"; + compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + sound { + compatible = "ad,tegra-audio-wm8903-medcom-wide", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design Medcom-Wide"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 684a9e1..ddf287f 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -272,12 +272,170 @@ status = "okay"; clock-frequency = <400000>; + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&p5valw_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "+1.2vs_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "+1.0vs_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "+3.7vs_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "+1.1vs_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "+1.2vs_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "+3.3vs_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "+2.85vs_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + /* + * Research indicates this should be + * 1.8v; other boards that use this + * rail for the same purpose need it + * set to 1.8v. The schematic signal + * name is incorrect; perhaps copied + * from an incorrect NVIDIA reference. + */ + regulator-name = "+2.85vs_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "+3.3vs_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "+2.85vs_ldo9,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "+3.3vs_rtc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + adt7461@4c { compatible = "adi,adt7461"; reg = <0x4c>; }; }; + pmc { + nvidia,invert-interrupt; + }; + usb@c5000000 { status = "okay"; }; @@ -325,6 +483,21 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + p5valw_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+5valw"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-alc5632-paz00", "nvidia,tegra-audio-alc5632"; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts new file mode 100644 index 0000000..331a3ef --- /dev/null +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -0,0 +1,50 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Plutux board"; + compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + sound { + compatible = "ad,tegra-audio-plutux", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design Plutux"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 85e621a..e60dc71 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -374,6 +374,154 @@ status = "okay"; clock-frequency = <400000>; + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + temperature-sensor@4c { compatible = "nct1008"; reg = <0x4c>; @@ -387,6 +535,10 @@ }; }; + pmc { + nvidia,invert-interrupt; + }; + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; @@ -473,6 +625,40 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-seaboard", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi new file mode 100644 index 0000000..f18cec9 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -0,0 +1,449 @@ +/include/ "tegra20.dtsi" + +/ { + model = "Avionic Design Tamonten SOM"; + compatible = "ad,tamonten", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + atd { + nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", + "spia", "spib", "spic"; + nvidia,function = "gmi"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtd"; + nvidia,function = "sdio2"; + }; + dtb { + nvidia,pins = "dtb", "dtc", "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa", "slxk"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uarta"; + }; + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + lcsn { + nvidia,pins = "lcsn", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhp0", "lhp1", "lhp2", + "lhs", "lm0", "lm1", "lpp", "lpw0", + "lpw1", "lpw2", "lsc0", "lsc1", "lsck", + "lsda", "lsdi", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxc { + nvidia,pins = "slxc", "slxd"; + nvidia,function = "spdif"; + }; + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", "ate", + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <0>; + }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_crtp { + nvidia,pins = "crtp", "dap2", "dap3", "dap4", + "dtc", "dte", "dtf", "gpu", "sdio1", + "slxc", "slxd", "spdi", "spdo", "spig", + "uda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_ddc { + nvidia,pins = "ddc", "dta", "dtd", "kbca", + "kbcb", "kbcc", "kbcd", "kbce", "kbcf", + "sdc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsc1", "lsck", "lsda", "lsdi", + "lvp0", "owc", "sdb"; + nvidia,tristate = <1>; + }; + conf_irrx { + nvidia,pins = "irrx", "irtx", "sdd", "spic", + "spie", "spih", "uaa", "uab", "uad", + "uca", "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <2>; + }; + conf_ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lspi", "lvp1", + "lvs", "pmc"; + nvidia,tristate = <0>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + clock-frequency = <216000000>; + status = "okay"; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + status = "okay"; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sys_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sys_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sys_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo0"; + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + bus-width = <4>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts new file mode 100644 index 0000000..9aff31b --- /dev/null +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -0,0 +1,53 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Tamonten Evaluation Carrier"; + compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + sound { + compatible = "ad,tegra-audio-wm8903-tec", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design TEC"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index be90544..3e5952f 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -289,6 +289,158 @@ i2c@7000d000 { status = "okay"; clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; }; usb@c5000000 { @@ -317,6 +469,60 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 22 0>; /* gpio PC6 */ + enable-active-high; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 176 0>; /* gpio PW0 */ + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-ventana", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 6916310..c636d00 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -261,6 +261,286 @@ gpio-controller; #gpio-cells = <2>; }; + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + maxim,system-power-controller; + + mbatt-supply = <&usb0_vbus_reg>; + in-v1-supply = <&mbatt_reg>; + in-v2-supply = <&mbatt_reg>; + in-v3-supply = <&mbatt_reg>; + in1-supply = <&mbatt_reg>; + in2-supply = <&nvvdd_sv3_reg>; + in3-supply = <&mbatt_reg>; + in4-supply = <&mbatt_reg>; + in5-supply = <&mbatt_reg>; + in6-supply = <&mbatt_reg>; + in7-supply = <&mbatt_reg>; + in8-supply = <&mbatt_reg>; + in9-supply = <&mbatt_reg>; + in10-supply = <&mbatt_reg>; + in11-supply = <&mbatt_reg>; + in12-supply = <&mbatt_reg>; + in13-supply = <&mbatt_reg>; + in14-supply = <&mbatt_reg>; + in15-supply = <&mbatt_reg>; + in16-supply = <&mbatt_reg>; + in17-supply = <&nvvdd_sv3_reg>; + in18-supply = <&nvvdd_sv3_reg>; + in19-supply = <&mbatt_reg>; + in20-supply = <&mbatt_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + mbatt_reg: regulator@0 { + reg = <0>; + regulator-compatible = "mbatt"; + regulator-name = "vbat_pmu"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sd1"; + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sd2"; + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + nvvdd_sv3_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sd3"; + regulator-name = "nvvdd_sv3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; + regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; + regulator-name = "nvvdd_ldo2,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo3"; + regulator-name = "nvvdd_ldo3,vcom_1v8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; + regulator-name = "nvvdd_ldo4,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; + regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; + regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; + regulator-name = "nvvdd_ldo7,avddio_audio"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; + regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo9"; + regulator-name = "nvvdd_ldo9,avdd_cam*"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo10"; + regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo11"; + regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@15 { + reg = <15>; + regulator-compatible = "ldo12"; + regulator-name = "nvvdd_ldo12,vddio_sdio"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@16 { + reg = <16>; + regulator-compatible = "ldo13"; + regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@17 { + reg = <17>; + regulator-compatible = "ldo14"; + regulator-name = "nvvdd_ldo14,avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@18 { + reg = <18>; + regulator-compatible = "ldo15"; + regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@19 { + reg = <19>; + regulator-compatible = "ldo16"; + regulator-name = "nvvdd_ldo16,vdd_dbrtr"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + regulator@20 { + reg = <20>; + regulator-compatible = "ldo17"; + regulator-name = "nvvdd_ldo17,vddio_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@21 { + reg = <21>; + regulator-compatible = "ldo18"; + regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@22 { + reg = <22>; + regulator-compatible = "ldo19"; + regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@23 { + reg = <23>; + regulator-compatible = "ldo20"; + regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@24 { + reg = <24>; + regulator-compatible = "out5v"; + regulator-name = "usb0_vbus_reg"; + }; + + regulator@25 { + reg = <25>; + regulator-compatible = "out33v"; + regulator-name = "pmu_out3v3"; + }; + + regulator@26 { + reg = <26>; + regulator-compatible = "bbat"; + regulator-name = "pmu_bbat"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2400000>; + regulator-always-on; + }; + + regulator@27 { + reg = <27>; + regulator-compatible = "sdby"; + regulator-name = "vdd_aon"; + regulator-always-on; + }; + + regulator@28 { + reg = <28>; + regulator-compatible = "vrtc"; + regulator-name = "vrtc,pmu_vccadc"; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; }; usb@c5000000 { @@ -284,6 +564,21 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb0_vbus_reg: regulator { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8753-whistler", "nvidia,tegra-audio-wm8753"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 405d167..67a6cd9 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -123,7 +123,7 @@ status = "disabled"; }; - pwm { + pwm: pwm { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts new file mode 100644 index 0000000..dd4222f --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -0,0 +1,87 @@ +/dts-v1/; + +/include/ "tegra30-cardhu.dtsi" + +/* This dts file support the cardhu A02 version of board */ + +/ { + model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; + compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 0>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 0>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 2 0>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 83 0>; /* GPIO PK3 */ + }; + }; +}; + diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts new file mode 100644 index 0000000..0828f09 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "tegra30-cardhu.dtsi" + +/* This dts file support the cardhu A04 and later versions of board */ + +/ { + model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; + compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "ddr"; + reg = <100>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 0>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 0>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 238 0>; /* GPIO PDD6 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 236 0>; /* GPIO PDD4 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 8 0>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 234 0>; /* GPIO PDD2 */ + }; + + vdd_bl2_reg: regulator@106 { + compatible = "regulator-fixed"; + reg = <106>; + regulator-name = "vdd_bl2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 232 0>; /* GPIO PDD0 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts deleted file mode 100644 index c169bce..0000000 --- a/arch/arm/boot/dts/tegra30-cardhu.dts +++ /dev/null @@ -1,171 +0,0 @@ -/dts-v1/; - -/include/ "tegra30.dtsi" - -/ { - model = "NVIDIA Tegra30 Cardhu evaluation board"; - compatible = "nvidia,cardhu", "nvidia,tegra30"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0"; - nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; - nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - dap2_fs_pa2 { - nvidia,pins = "dap2_fs_pa2", - "dap2_sclk_pa3", - "dap2_din_pa4", - "dap2_dout_pa5"; - nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - }; - }; - - serial@70006000 { - status = "okay"; - clock-frequency = <408000000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - - /* ALS and Proximity sensor */ - isl29028@44 { - compatible = "isil,isl29028"; - reg = <0x44>; - interrupt-parent = <&gpio>; - interrupts = <88 0x04>; /*gpio PL0 */ - }; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - - wm8903: wm8903@1a { - compatible = "wlf,wm8903"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <179 0x04>; /* gpio PW3 */ - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; - }; - - tps62361 { - compatible = "ti,tps62361"; - reg = <0x60>; - - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - ti,vsel0-state-high; - ti,vsel1-state-high; - }; - }; - - ahub { - i2s@70080400 { - status = "okay"; - }; - }; - - sdhci@78000000 { - status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ - bus-width = <4>; - }; - - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - sound { - compatible = "nvidia,tegra-audio-wm8903-cardhu", - "nvidia,tegra-audio-wm8903"; - nvidia,model = "NVIDIA Tegra Cardhu"; - - nvidia,audio-routing = - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "Int Spk", "ROP", - "Int Spk", "RON", - "Int Spk", "LOP", - "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&wm8903>; - - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - }; -}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi new file mode 100644 index 0000000..d10c9c5 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -0,0 +1,475 @@ +/include/ "tegra30.dtsi" + +/** + * This file contains common DT entry for all fab version of Cardhu. + * There is multiple fab version of Cardhu starting from A01 to A07. + * Cardhu fab version A01 and A03 are not supported. Cardhu fab version + * A02 will have different sets of GPIOs for fixed regulator compare to + * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are + * compatible with fab version A04. Based on Cardhu fab version, the + * related dts file need to be chosen like for Cardhu fab version A02, + * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use + * tegra30-cardhu-a04.dts. + * The identification of board is done in two ways, by looking the sticker + * on PCB and by reading board id eeprom. + * The stciker will have number like 600-81291-1000-002 C.3. In this 4th + * number is the fab version like here it is 002 and hence fab version A02. + * The (downstream internal) U-Boot of Cardhu display the board-id as + * follows: + * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00 + * In this Fab version is 02 i.e. A02. + * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56). + * The location 0x8 of this eeprom contains the Fab version. It is 1 byte + * wide. + */ + +/ { + model = "NVIDIA Tegra30 Cardhu evaluation board"; + compatible = "nvidia,cardhu", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + }; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <408000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + /* ALS and Proximity sensor */ + isl29028@44 { + compatible = "isil,isl29028"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <88 0x04>; /*gpio PL0 */ + }; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <179 0x04>; /* gpio PW3 */ + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <0 86 0x4>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_ac_bat_reg>; + vcc2-supply = <&vdd_ac_bat_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&vdd_5v0_reg>; + vcc5-supply = <&vdd_ac_bat_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_ac_bat_reg>; + vccio-supply = <&vdd_ac_bat_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vdd1"; + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vdd2"; + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vddctrl_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vddctrl"; + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vio_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vio"; + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5_reg: regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7_reg: regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + }; + + ahub { + i2s@70080400 { + status = "okay"; + }; + }; + + pmc { + status = "okay"; + nvidia,invert-interrupt; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + cam_1v8_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "cam_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio 220 0>; /* gpio PBB4 */ + vin-supply = <&vio_reg>; + }; + + cp_5v_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "cp_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + }; + + emmc_3v3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "emmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 25 0>; /* gpio PD1 */ + vin-supply = <&sys_3v3_reg>; + }; + + modem_3v3_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "modem_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 30 0>; /* gpio PD6 */ + }; + + pex_hvdd_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "pex_hvdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 95 0>; /* gpio PL7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam1_ldo_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd_cam1_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio 142 0>; /* gpio PR6 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam2_ldo_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "vdd_cam2_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio 143 0>; /* gpio PR7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam3_ldo_reg: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "vdd_cam3_ldo"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 144 0>; /* gpio PS0 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_com_reg: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "vdd_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 24 0>; /* gpio PD0 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_fuse_3v3_reg: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 94 0>; /* gpio PL6 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_pnl1_reg: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "vdd_pnl1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 92 0>; /* gpio PL4 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_vid_reg: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 152 0>; /* GPIO PT0 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-cardhu", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Cardhu"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 3e4334d..b1497c7 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -117,7 +117,7 @@ status = "disabled"; }; - pwm { + pwm: pwm { compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi new file mode 100644 index 0000000..a632724 --- /dev/null +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65217.pdf + */ + +&tps { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi new file mode 100644 index 0000000..92693a8 --- /dev/null +++ b/arch/arm/boot/dts/tps65910.dtsi @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65910.pdf + */ + +&tps { + compatible = "ti,tps65910"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vrtc_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vrtc"; + }; + + vio_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vio"; + }; + + vdd1_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vdd1"; + }; + + vdd2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vdd2"; + }; + + vdd3_reg: regulator@4 { + reg = <4>; + regulator-compatible = "vdd3"; + }; + + vdig1_reg: regulator@5 { + reg = <5>; + regulator-compatible = "vdig1"; + }; + + vdig2_reg: regulator@6 { + reg = <6>; + regulator-compatible = "vdig2"; + }; + + vpll_reg: regulator@7 { + reg = <7>; + regulator-compatible = "vpll"; + }; + + vdac_reg: regulator@8 { + reg = <8>; + regulator-compatible = "vdac"; + }; + + vaux1_reg: regulator@9 { + reg = <9>; + regulator-compatible = "vaux1"; + }; + + vaux2_reg: regulator@10 { + reg = <10>; + regulator-compatible = "vaux2"; + }; + + vaux33_reg: regulator@11 { + reg = <11>; + regulator-compatible = "vaux33"; + }; + + vmmc_reg: regulator@12 { + reg = <12>; + regulator-compatible = "vmmc"; + }; + }; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 22f4d13..ff00017 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -19,19 +19,19 @@ interrupts = <11>; }; - vdac: regulator@0 { + vdac: regulator-vdac { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vpll2: regulator@1 { + vpll2: regulator-vpll2 { compatible = "ti,twl4030-vpll2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vmmc1: regulator@2 { + vmmc1: regulator-vmmc1 { compatible = "ti,twl4030-vmmc1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index d351b27..123e2c4 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -20,70 +20,70 @@ interrupts = <11>; }; - vaux1: regulator@0 { + vaux1: regulator-vaux1 { compatible = "ti,twl6030-vaux1"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vaux2: regulator@1 { + vaux2: regulator-vaux2 { compatible = "ti,twl6030-vaux2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2800000>; }; - vaux3: regulator@2 { + vaux3: regulator-vaux3 { compatible = "ti,twl6030-vaux3"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vmmc: regulator@3 { + vmmc: regulator-vmmc { compatible = "ti,twl6030-vmmc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; }; - vpp: regulator@4 { + vpp: regulator-vpp { compatible = "ti,twl6030-vpp"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2500000>; }; - vusim: regulator@5 { + vusim: regulator-vusim { compatible = "ti,twl6030-vusim"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2900000>; }; - vdac: regulator@6 { + vdac: regulator-vdac { compatible = "ti,twl6030-vdac"; }; - vana: regulator@7 { + vana: regulator-vana { compatible = "ti,twl6030-vana"; }; - vcxio: regulator@8 { + vcxio: regulator-vcxio { compatible = "ti,twl6030-vcxio"; regulator-always-on; }; - vusb: regulator@9 { + vusb: regulator-vusb { compatible = "ti,twl6030-vusb"; }; - v1v8: regulator@10 { + v1v8: regulator-v1v8 { compatible = "ti,twl6030-v1v8"; regulator-always-on; }; - v2v1: regulator@11 { + v2v1: regulator-v2v1 { compatible = "ti,twl6030-v2v1"; regulator-always-on; }; - clk32kg: regulator@12 { + clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; }; diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts new file mode 100644 index 0000000..567cf4e --- /dev/null +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -0,0 +1,36 @@ +/* + * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "vt8500.dtsi" + +/ { + model = "Benign BV07 Netbook"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi new file mode 100644 index 0000000..d8645e9 --- /dev/null +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -0,0 +1,116 @@ +/* + * vt8500.dtsi - Device tree file for VIA VT8500 SoC + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "via,vt8500"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc>; + + intc: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "via,vt8500-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; + + fb@d800e400 { + compatible = "via,vt8500-fb"; + reg = <0xd800e400 0x400>; + interrupts = <12>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; + + uart@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts new file mode 100644 index 0000000..fd4e248 --- /dev/null +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -0,0 +1,36 @@ +/* + * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8505.dtsi" + +/ { + model = "Wondermedia WM8505 Netbook"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <32>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi new file mode 100644 index 0000000..b459691 --- /dev/null +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -0,0 +1,143 @@ +/* + * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8505"; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "wm,wm8505-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007100 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007100 0x200>; + interrupts = <43>; + }; + + uhci@d8007300 { + compatible = "platform-uhci"; + reg = <0xd8007300 0x200>; + interrupts = <43>; + }; + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; + + uart@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&ref24>; + }; + + uart@d8370000 { + compatible = "via,vt8500-uart"; + reg = <0xd8370000 0x1040>; + interrupts = <31>; + clocks = <&ref24>; + }; + + uart@d8380000 { + compatible = "via,vt8500-uart"; + reg = <0xd8380000 0x1040>; + interrupts = <30>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts new file mode 100644 index 0000000..cefd938 --- /dev/null +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -0,0 +1,36 @@ +/* + * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8650.dtsi" + +/ { + model = "Wondermedia WM8650-MID Tablet"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi new file mode 100644 index 0000000..83b9467 --- /dev/null +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -0,0 +1,147 @@ +/* + * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8650"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "wm,wm8650-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + + arm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + sdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xenvm-4.2.dts new file mode 100644 index 0000000..ec3f952 --- /dev/null +++ b/arch/arm/boot/dts/xenvm-4.2.dts @@ -0,0 +1,68 @@ +/* + * Xen Virtual Machine for unprivileged guests + * + * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU) + * Cortex-A15 MPCore (V2P-CA15) + * + */ + +/dts-v1/; + +/ { + model = "XENVM-4.2"; + compatible = "xen,xenvm-4.2", "xen,xenvm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { + /* this field is going to be adjusted by the hypervisor */ + bootargs = "console=hvc0 root=/dev/xvda"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* this field is going to be adjusted by the hypervisor */ + reg = <0 0x80000000 0 0x08000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x100>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + hypervisor { + compatible = "xen,xen-4.2", "xen,xen"; + /* this field is going to be adjusted by the hypervisor */ + reg = <0 0xb0000000 0 0x20000>; + /* this field is going to be adjusted by the hypervisor */ + interrupts = <1 15 0xf08>; + }; + + motherboard { + arm,v2m-memory-map = "rs1"; + }; +}; |
