summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/sama5d3xmb.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/sama5d3xmb.dtsi')
-rw-r--r--arch/arm/boot/dts/sama5d3xmb.dtsi26
1 files changed, 13 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 661d7ca..8a9e05d 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -6,7 +6,7 @@
*
* Licensed under GPLv2 or later.
*/
-/include/ "sama5d3xcm.dtsi"
+#include "sama5d3xcm.dtsi"
/ {
compatible = "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
@@ -20,7 +20,7 @@
slot@0 {
reg = <0>;
bus-width = <4>;
- cd-gpios = <&pioD 17 0>;
+ cd-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
};
};
@@ -62,7 +62,7 @@
slot@0 {
reg = <0>;
bus-width = <4>;
- cd-gpios = <&pioD 18 0>;
+ cd-gpios = <&pioD 18 GPIO_ACTIVE_HIGH>;
};
};
@@ -87,32 +87,32 @@
board {
pinctrl_mmc0_cd: mmc0_cd {
atmel,pins =
- <3 17 0x0 0x5>; /* PD17 GPIO with pullup deglitch */
+ <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD17 GPIO with pullup deglitch */
};
pinctrl_mmc1_cd: mmc1_cd {
atmel,pins =
- <3 18 0x0 0x5>; /* PD18 GPIO with pullup deglitch */
+ <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD18 GPIO with pullup deglitch */
};
pinctrl_pck0_as_audio_mck: pck0_as_audio_mck {
atmel,pins =
- <3 30 0x2 0x0>; /* PD30 periph B */
+ <AT91_PIOD 30 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* PD30 periph B */
};
pinctrl_isi_reset: isi_reset-0 {
atmel,pins =
- <4 24 0x0 0x0>; /* PE24 gpio */
+ <AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE24 gpio */
};
pinctrl_isi_power: isi_power-0 {
atmel,pins =
- <4 29 0x0 0x0>; /* PE29 gpio */
+ <AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; /* PE29 gpio */
};
pinctrl_usba_vbus: usba_vbus {
atmel,pins =
- <3 29 0x0 0x4>; /* PD29 GPIO with deglitch */
+ <AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PD29 GPIO with deglitch */
};
};
};
@@ -127,7 +127,7 @@
};
usb0: gadget@00500000 {
- atmel,vbus-gpio = <&pioD 29 0>;
+ atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
@@ -135,9 +135,9 @@
usb1: ohci@00600000 {
num-ports = <3>;
- atmel,vbus-gpio = <&pioD 25 0
- &pioD 26 1
- &pioD 27 1
+ atmel,vbus-gpio = <&pioD 25 GPIO_ACTIVE_HIGH
+ &pioD 26 GPIO_ACTIVE_LOW
+ &pioD 27 GPIO_ACTIVE_LOW
>;
status = "okay";
};
OpenPOWER on IntegriCloud