summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/dra72-evm.dts
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/dra72-evm.dts')
-rw-r--r--arch/arm/boot/dts/dra72-evm.dts26
1 files changed, 22 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 8037384..6f6bd98 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -30,6 +30,15 @@
regulator-max-microvolt = <3300000>;
};
+ evm_3v3_sd: fixedregulator-sd {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3_sd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+ };
+
extcon_usb1: extcon_usb1 {
compatible = "linux,extcon-usb-gpio";
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
@@ -286,6 +295,7 @@
regulator-name = "ldo1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
regulator-boot-on;
};
@@ -343,6 +353,12 @@
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
+
+ cpsw_sel_s0 {
+ gpio-hog;
+ gpios = <4 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
};
};
@@ -491,14 +507,15 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_default>;
-
- vmmc-supply = <&ldo1_reg>;
+ vmmc-supply = <&evm_3v3_sd>;
+ vmmc_aux-supply = <&ldo1_reg>;
bus-width = <4>;
/*
* SDCD signal is not being used here - using the fact that GPIO mode
* is a viable alternative
*/
cd-gpios = <&gpio6 27 0>;
+ max-frequency = <192000000>;
};
&mmc2 {
@@ -510,6 +527,7 @@
vmmc-supply = <&evm_3v3>;
bus-width = <8>;
ti,non-removable;
+ max-frequency = <192000000>;
};
&dra7_pmx_core {
@@ -571,9 +589,10 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
+ slaves = <1>;
};
-&cpsw_emac1 {
+&cpsw_emac0 {
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
@@ -582,7 +601,6 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
- active_slave = <1>;
};
&dcan1 {
OpenPOWER on IntegriCloud