diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 73 |
1 files changed, 61 insertions, 12 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 6a5b496..03dc4c1 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -101,6 +101,10 @@ choice bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 + config AT91_DEBUG_LL_DBGU2 + bool "Kernel low-level debugging on sama5d4" + depends on HAVE_AT91_DBGU2 + config DEBUG_BCM2835 bool "Kernel low-level debugging on BCM2835 PL011 UART" depends on ARCH_BCM2835 @@ -122,6 +126,11 @@ choice mobile SoCs in the Kona family of chips (e.g. bcm28155, bcm11351, etc...) + config DEBUG_BCM63XX + bool "Kernel low-level debugging on BCM63XX UART" + depends on ARCH_BCM_63XX + select DEBUG_UART_BCM63XX + config DEBUG_BERLIN_UART bool "Marvell Berlin SoC Debug UART" depends on ARCH_BERLIN @@ -223,14 +232,6 @@ choice Say Y here if you want kernel low-level debugging support on HI3716 UART. - config DEBUG_HIX5HD2_UART - bool "Hisilicon Hix5hd2 Debug UART" - depends on ARCH_HIX5HD2 - select DEBUG_UART_PL01X - help - Say Y here if you want kernel low-level debugging support - on Hix5hd2 UART. - config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -239,6 +240,22 @@ choice Say Y here if you want the debug print routines to direct their output to the UART on Highbank based devices. + config DEBUG_HIP04_UART + bool "Hisilicon HiP04 Debug UART" + depends on ARCH_HIP04 + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on HIP04 UART. + + config DEBUG_HIX5HD2_UART + bool "Hisilicon Hix5hd2 Debug UART" + depends on ARCH_HIX5HD2 + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on Hix5hd2 UART. + config DEBUG_IMX1_UART bool "i.MX1 Debug UART" depends on SOC_IMX1 @@ -348,6 +365,13 @@ choice Say Y here if you want the debug print routines to direct their output to UART1 serial port on KEYSTONE2 devices. + config DEBUG_MESON_UARTAO + bool "Kernel low-level debugging via Meson6 UARTAO" + depends on ARCH_MESON + help + Say Y here if you want kernel low-lever debugging support + on Amlogic Meson6 based platforms on the UARTAO. + config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" depends on ARCH_MMP @@ -834,6 +858,14 @@ choice Say Y here if you want kernel low-level debugging support on Ux500 based platforms. + config DEBUG_MT6589_UART0 + bool "Mediatek mt6589 UART0" + depends on ARCH_MEDIATEK + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + for Mediatek mt6589 based platforms on UART0. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -1011,6 +1043,7 @@ config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 + default "debug/meson.S" if DEBUG_MESON_UARTAO default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/efm32.S" if DEBUG_LL_UART_EFM32 @@ -1038,6 +1071,7 @@ config DEBUG_LL_INCLUDE default "debug/vf.S" if DEBUG_VF_UART default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 + default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX default "mach/debug-macro.S" # Compatibility options for PL01x @@ -1057,6 +1091,10 @@ config DEBUG_UART_8250 ARCH_IOP33X || ARCH_IXP4XX || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC +# Compatibility options for BCM63xx +config DEBUG_UART_BCM63XX + def_bool ARCH_BCM_63XX + config DEBUG_UART_PHYS hex "Physical base address of debug UART" default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0 @@ -1075,6 +1113,7 @@ config DEBUG_UART_PHYS default 0x10126000 if DEBUG_RK3X_UART1 default 0x101f1000 if ARCH_VERSATILE default 0x101fb000 if DEBUG_NOMADIK_UART + default 0x11006000 if DEBUG_MT6589_UART0 default 0x16000000 if ARCH_INTEGRATOR default 0x18000300 if DEBUG_BCM_5301X default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1 @@ -1093,6 +1132,7 @@ config DEBUG_UART_PHYS DEBUG_S3C2410_UART1) default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ DEBUG_S3C2410_UART2) + default 0x78000000 if DEBUG_CNS3XXX default 0x7c0003f8 if FOOTBRIDGE default 0x78000000 if DEBUG_CNS3XXX default 0x80070000 if DEBUG_IMX23_UART @@ -1107,9 +1147,11 @@ config DEBUG_UART_PHYS default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xd0012000 if DEBUG_MVEBU_UART + default 0xc81004c0 if DEBUG_MESON_UARTAO default 0xd4017000 if DEBUG_MMP_UART2 default 0xd4018000 if DEBUG_MMP_UART3 default 0xe0000000 if ARCH_SPEAR13XX + default 0xe4007000 if DEBUG_HIP04_UART default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ @@ -1123,11 +1165,13 @@ config DEBUG_UART_PHYS default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX default 0xfff36000 if DEBUG_HIGHBANK_UART + default 0xfffe8600 if DEBUG_UART_BCM63XX default 0xfffff700 if ARCH_IOP33X depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ DEBUG_LL_UART_EFM32 || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X || \ - DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_UART_BCM63XX config DEBUG_UART_VIRT hex "Virtual base address of debug UART" @@ -1137,6 +1181,7 @@ config DEBUG_UART_VIRT default 0xf01fb000 if DEBUG_NOMADIK_UART default 0xf0201000 if DEBUG_BCM2835 default 0xf1000300 if DEBUG_BCM_5301X + default 0xf1006000 if DEBUG_MT6589_UART0 default 0xf11f1000 if ARCH_VERSATILE default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 @@ -1152,17 +1197,20 @@ config DEBUG_UART_VIRT default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \ DEBUG_S3C2410_UART2) default 0xf7fc9000 if DEBUG_BERLIN_UART + default 0xf8007000 if DEBUG_HIP04_UART default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9 default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1 default 0xfa71e000 if DEBUG_QCOM_UARTDM default 0xfb002000 if DEBUG_CNS3XXX default 0xfb009000 if DEBUG_REALVIEW_STD_PORT default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT + default 0xfcfe8600 if DEBUG_UART_BCM63XX default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX default 0xfd000000 if ARCH_SPEAR13XX default 0xfd012000 if ARCH_MV78XX0 default 0xfde12000 if ARCH_DOVE default 0xfe012000 if ARCH_ORION5X + default 0xf31004c0 if DEBUG_MESON_UARTAO default 0xfe017000 if DEBUG_MMP_UART2 default 0xfe018000 if DEBUG_MMP_UART3 default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART @@ -1194,8 +1242,9 @@ config DEBUG_UART_VIRT default 0xff003000 if DEBUG_U300_UART default DEBUG_UART_PHYS if !MMU depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \ - DEBUG_UART_8250 || DEBUG_UART_PL01X || \ - DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART + DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \ + DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \ + DEBUG_UART_BCM63XX config DEBUG_UART_8250_SHIFT int "Register offset shift for the 8250 debug UART" |
