diff options
Diffstat (limited to 'Documentation')
24 files changed, 702 insertions, 233 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index f9937ad..9734577 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -39,3 +39,16 @@ Description: If you want to suspend a device immediately but leave it free to wake up in response to I/O requests, you should write "0" to power/autosuspend. + +What: /sys/bus/usb/devices/.../power/persist +Date: May 2007 +KernelVersion: 2.6.23 +Contact: Alan Stern <stern@rowland.harvard.edu> +Description: + If CONFIG_USB_PERSIST is set, then each USB device directory + will contain a file named power/persist. The file holds a + boolean value (0 or 1) indicating whether or not the + "USB-Persist" facility is enabled for the device. Since the + facility is inherently dangerous, it is disabled by default + for all devices except hubs. For more information, see + Documentation/usb/persist.txt. diff --git a/Documentation/DMA-mapping.txt b/Documentation/DMA-mapping.txt index 028614c..e07f253 100644 --- a/Documentation/DMA-mapping.txt +++ b/Documentation/DMA-mapping.txt @@ -664,109 +664,6 @@ It is that simple. Well, not for some odd devices. See the next section for information about that. - DAC Addressing for Address Space Hungry Devices - -There exists a class of devices which do not mesh well with the PCI -DMA mapping API. By definition these "mappings" are a finite -resource. The number of total available mappings per bus is platform -specific, but there will always be a reasonable amount. - -What is "reasonable"? Reasonable means that networking and block I/O -devices need not worry about using too many mappings. - -As an example of a problematic device, consider compute cluster cards. -They can potentially need to access gigabytes of memory at once via -DMA. Dynamic mappings are unsuitable for this kind of access pattern. - -To this end we've provided a small API by which a device driver -may use DAC cycles to directly address all of physical memory. -Not all platforms support this, but most do. It is easy to determine -whether the platform will work properly at probe time. - -First, understand that there may be a SEVERE performance penalty for -using these interfaces on some platforms. Therefore, you MUST only -use these interfaces if it is absolutely required. %99 of devices can -use the normal APIs without any problems. - -Note that for streaming type mappings you must either use these -interfaces, or the dynamic mapping interfaces above. You may not mix -usage of both for the same device. Such an act is illegal and is -guaranteed to put a banana in your tailpipe. - -However, consistent mappings may in fact be used in conjunction with -these interfaces. Remember that, as defined, consistent mappings are -always going to be SAC addressable. - -The first thing your driver needs to do is query the PCI platform -layer if it is capable of handling your devices DAC addressing -capabilities: - - int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask); - -You may not use the following interfaces if this routine fails. - -Next, DMA addresses using this API are kept track of using the -dma64_addr_t type. It is guaranteed to be big enough to hold any -DAC address the platform layer will give to you from the following -routines. If you have consistent mappings as well, you still -use plain dma_addr_t to keep track of those. - -All mappings obtained here will be direct. The mappings are not -translated, and this is the purpose of this dialect of the DMA API. - -All routines work with page/offset pairs. This is the _ONLY_ way to -portably refer to any piece of memory. If you have a cpu pointer -(which may be validly DMA'd too) you may easily obtain the page -and offset using something like this: - - struct page *page = virt_to_page(ptr); - unsigned long offset = offset_in_page(ptr); - -Here are the interfaces: - - dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, - struct page *page, - unsigned long offset, - int direction); - -The DAC address for the tuple PAGE/OFFSET are returned. The direction -argument is the same as for pci_{map,unmap}_single(). The same rules -for cpu/device access apply here as for the streaming mapping -interfaces. To reiterate: - - The cpu may touch the buffer before pci_dac_page_to_dma. - The device may touch the buffer after pci_dac_page_to_dma - is made, but the cpu may NOT. - -When the DMA transfer is complete, invoke: - - void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, - dma64_addr_t dma_addr, - size_t len, int direction); - -This must be done before the CPU looks at the buffer again. -This interface behaves identically to pci_dma_sync_{single,sg}_for_cpu(). - -And likewise, if you wish to let the device get back at the buffer after -the cpu has read/written it, invoke: - - void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, - dma64_addr_t dma_addr, - size_t len, int direction); - -before letting the device access the DMA area again. - -If you need to get back to the PAGE/OFFSET tuple from a dma64_addr_t -the following interfaces are provided: - - struct page *pci_dac_dma_to_page(struct pci_dev *pdev, - dma64_addr_t dma_addr); - unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, - dma64_addr_t dma_addr); - -This is possible with the DAC interfaces purely because they are -not translated in any way. - Optimizing Unmap State Space Consumption On many platforms, pci_unmap_{single,page}() is simply a nop. diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 8c5698a..46bcff2 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -643,6 +643,60 @@ X!Idrivers/video/console/fonts.c !Edrivers/spi/spi.c </chapter> + <chapter id="i2c"> + <title>I<superscript>2</superscript>C and SMBus Subsystem</title> + + <para> + I<superscript>2</superscript>C (or without fancy typography, "I2C") + is an acronym for the "Inter-IC" bus, a simple bus protocol which is + widely used where low data rate communications suffice. + Since it's also a licensed trademark, some vendors use another + name (such as "Two-Wire Interface", TWI) for the same bus. + I2C only needs two signals (SCL for clock, SDA for data), conserving + board real estate and minimizing signal quality issues. + Most I2C devices use seven bit addresses, and bus speeds of up + to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet + found wide use. + I2C is a multi-master bus; open drain signaling is used to + arbitrate between masters, as well as to handshake and to + synchronize clocks from slower clients. + </para> + + <para> + The Linux I2C programming interfaces support only the master + side of bus interactions, not the slave side. + The programming interface is structured around two kinds of driver, + and two kinds of device. + An I2C "Adapter Driver" abstracts the controller hardware; it binds + to a physical device (perhaps a PCI device or platform_device) and + exposes a <structname>struct i2c_adapter</structname> representing + each I2C bus segment it manages. + On each I2C bus segment will be I2C devices represented by a + <structname>struct i2c_client</structname>. Those devices will + be bound to a <structname>struct i2c_driver</structname>, + which should follow the standard Linux driver model. + (At this writing, a legacy model is more widely used.) + There are functions to perform various I2C protocol operations; at + this writing all such functions are usable only from task context. + </para> + + <para> + The System Management Bus (SMBus) is a sibling protocol. Most SMBus + systems are also I2C conformant. The electrical constraints are + tighter for SMBus, and it standardizes particular protocol messages + and idioms. Controllers that support I2C can also support most + SMBus operations, but SMBus controllers don't support all the protocol + options that an I2C controller will. + There are functions to perform various SMBus protocol operations, + either using I2C primitives or by issuing SMBus commands to + i2c_adapter devices which don't support those I2C operations. + </para> + +!Iinclude/linux/i2c.h +!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info +!Edrivers/i2c/i2c-core.c + </chapter> + <chapter id="splice"> <title>splice API</title> <para>) @@ -654,4 +708,5 @@ X!Idrivers/video/console/fonts.c !Ffs/splice.c </chapter> + </book> diff --git a/Documentation/blackfin/kgdb.txt b/Documentation/blackfin/kgdb.txt new file mode 100644 index 0000000..84f6a484 --- /dev/null +++ b/Documentation/blackfin/kgdb.txt @@ -0,0 +1,155 @@ + A Simple Guide to Configure KGDB + + Sonic Zhang <sonic.zhang@analog.com> + Aug. 24th 2006 + + +This KGDB patch enables the kernel developer to do source level debugging on +the kernel for the Blackfin architecture. The debugging works over either the +ethernet interface or one of the uarts. Both software breakpoints and +hardware breakpoints are supported in this version. +http://docs.blackfin.uclinux.org/doku.php?id=kgdb + + +2 known issues: +1. This bug: + http://blackfin.uclinux.org/tracker/index.php?func=detail&aid=544&group_id=18&atid=145 + The GDB client for Blackfin uClinux causes incorrect values of local + variables to be displayed when the user breaks the running of kernel in GDB. +2. Because of a hardware bug in Blackfin 533 v1.0.3: + 05000067 - Watchpoints (Hardware Breakpoints) are not supported + Hardware breakpoints cannot be set properly. + + +Debug over Ethernet: + +1. Compile and install the cross platform version of gdb for blackfin, which + can be found at $(BINROOT)/bfin-elf-gdb. + +2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under + "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb". + With this selected, option "Full Symbolic/Source Debugging support" and + "Compile the kernel with frame pointers" are also selected. + +3. Select option "KGDB: connect over (Ethernet)". Add "kgdboe=@target-IP/,@host-IP/" to + the option "Compiled-in Kernel Boot Parameter" under "Kernel hacking". + +4. Connect minicom to the serial port and boot the kernel image. + +5. Configure the IP "/> ifconfig eth0 target-IP" + +6. Start GDB client "bfin-elf-gdb vmlinux". + +7. Connect to the target "(gdb) target remote udp:target-IP:6443". + +8. Set software breakpoint "(gdb) break sys_open". + +9. Continue "(gdb) c". + +10. Run ls in the target console "/> ls". + +11. Breakpoint hits. "Breakpoint 1: sys_open(..." + +12. Display local variables and function paramters. + (*) This operation gives wrong results, see known issue 1. + +13. Single stepping "(gdb) si". + +14. Remove breakpoint 1. "(gdb) del 1" + +15. Set hardware breakpoint "(gdb) hbreak sys_open". + +16. Continue "(gdb) c". + +17. Run ls in the target console "/> ls". + +18. Hardware breakpoint hits. "Breakpoint 1: sys_open(...". + (*) This hardware breakpoint will not be hit, see known issue 2. + +19. Continue "(gdb) c". + +20. Interrupt the target in GDB "Ctrl+C". + +21. Detach from the target "(gdb) detach". + +22. Exit GDB "(gdb) quit". + + +Debug over the UART: + +1. Compile and install the cross platform version of gdb for blackfin, which + can be found at $(BINROOT)/bfin-elf-gdb. + +2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under + "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb". + With this selected, option "Full Symbolic/Source Debugging support" and + "Compile the kernel with frame pointers" are also selected. + +3. Select option "KGDB: connect over (UART)". Set "KGDB: UART port number" to be + a different one from the console. Don't forget to change the mode of + blackfin serial driver to PIO. Otherwise kgdb works incorrectly on UART. + +4. If you want connect to kgdb when the kernel boots, enable + "KGDB: Wait for gdb connection early" + +5. Compile kernel. + +6. Connect minicom to the serial port of the console and boot the kernel image. + +7. Start GDB client "bfin-elf-gdb vmlinux". + +8. Set the baud rate in GDB "(gdb) set remotebaud 57600". + +9. Connect to the target on the second serial port "(gdb) target remote /dev/ttyS1". + +10. Set software breakpoint "(gdb) break sys_open". + +11. Continue "(gdb) c". + +12. Run ls in the target console "/> ls". + +13. A breakpoint is hit. "Breakpoint 1: sys_open(..." + +14. All other operations are the same as that in KGDB over Ethernet. + + +Debug over the same UART as console: + +1. Compile and install the cross platform version of gdb for blackfin, which + can be found at $(BINROOT)/bfin-elf-gdb. + +2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under + "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb". + With this selected, option "Full Symbolic/Source Debugging support" and + "Compile the kernel with frame pointers" are also selected. + +3. Select option "KGDB: connect over UART". Set "KGDB: UART port number" to console. + Don't forget to change the mode of blackfin serial driver to PIO. + Otherwise kgdb works incorrectly on UART. + +4. If you want connect to kgdb when the kernel boots, enable + "KGDB: Wait for gdb connection early" + +5. Connect minicom to the serial port and boot the kernel image. + +6. (Optional) Ask target to wait for gdb connection by entering Ctrl+A. In minicom, you should enter Ctrl+A+A. + +7. Start GDB client "bfin-elf-gdb vmlinux". + +8. Set the baud rate in GDB "(gdb) set remotebaud 57600". + +9. Connect to the target "(gdb) target remote /dev/ttyS0". + +10. Set software breakpoint "(gdb) break sys_open". + +11. Continue "(gdb) c". Then enter Ctrl+C twice to stop GDB connection. + +12. Run ls in the target console "/> ls". Dummy string can be seen on the console. + +13. Then connect the gdb to target again. "(gdb) target remote /dev/ttyS0". + Now you will find a breakpoint is hit. "Breakpoint 1: sys_open(..." + +14. All other operations are the same as that in KGDB over Ethernet. The only + difference is that after continue command in GDB, please stop GDB + connection by 2 "Ctrl+C"s and connect again after breakpoints are hit or + Ctrl+A is entered. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 062fc2e..092c65d 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -196,28 +196,6 @@ Who: Adrian Bunk <bunk@stusta.de> --------------------------- -What: ACPI hooks (X86_SPEEDSTEP_CENTRINO_ACPI) in speedstep-centrino driver -When: December 2006 -Why: Speedstep-centrino driver with ACPI hooks and acpi-cpufreq driver are - functionally very much similar. They talk to ACPI in same way. Only - difference between them is the way they do frequency transitions. - One uses MSRs and the other one uses IO ports. Functionaliy of - speedstep_centrino with ACPI hooks is now merged into acpi-cpufreq. - That means one common driver will support all Intel Enhanced Speedstep - capable CPUs. That means less confusion over name of - speedstep-centrino driver (with that driver supposed to be used on - non-centrino platforms). That means less duplication of code and - less maintenance effort and no possibility of these two drivers - going out of sync. - Current users of speedstep_centrino with ACPI hooks are requested to - switch over to acpi-cpufreq driver. speedstep-centrino will continue - to work using older non-ACPI static table based scheme even after this - date. - -Who: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> - ---------------------------- - What: /sys/firmware/acpi/namespace When: 2.6.21 Why: The ACPI namespace is effectively the symbol list for @@ -311,6 +289,13 @@ Who: Tejun Heo <htejun@gmail.com> --------------------------- +What: Legacy RTC drivers (under drivers/i2c/chips) +When: November 2007 +Why: Obsolete. We have a RTC subsystem with better drivers. +Who: Jean Delvare <khali@linux-fr.org> + +--------------------------- + What: iptables SAME target When: 1.1. 2008 Files: net/ipv4/netfilter/ipt_SAME.c, include/linux/netfilter_ipv4/ipt_SAME.h diff --git a/Documentation/firmware_class/firmware_sample_firmware_class.c b/Documentation/firmware_class/firmware_sample_firmware_class.c index 4994f1f..fba943a 100644 --- a/Documentation/firmware_class/firmware_sample_firmware_class.c +++ b/Documentation/firmware_class/firmware_sample_firmware_class.c @@ -78,6 +78,7 @@ static CLASS_DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store); static ssize_t firmware_data_read(struct kobject *kobj, + struct bin_attribute *bin_attr, char *buffer, loff_t offset, size_t count) { struct class_device *class_dev = to_class_dev(kobj); @@ -88,6 +89,7 @@ static ssize_t firmware_data_read(struct kobject *kobj, return count; } static ssize_t firmware_data_write(struct kobject *kobj, + struct bin_attribute *bin_attr, char *buffer, loff_t offset, size_t count) { struct class_device *class_dev = to_class_dev(kobj); diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index c34f0db..fe6406f 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -5,8 +5,8 @@ Supported adapters: '810' and '810E' chipsets) * Intel 82801BA (ICH2 - part of the '815E' chipset) * Intel 82801CA/CAM (ICH3) - * Intel 82801DB (ICH4) (HW PEC supported, 32 byte buffer not supported) - * Intel 82801EB/ER (ICH5) (HW PEC supported, 32 byte buffer not supported) + * Intel 82801DB (ICH4) (HW PEC supported) + * Intel 82801EB/ER (ICH5) (HW PEC supported) * Intel 6300ESB * Intel 82801FB/FR/FW/FRW (ICH6) * Intel 82801G (ICH7) diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index 7cbe43f..fa0c786 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -6,7 +6,7 @@ Supported adapters: Datasheet: Publicly available at the Intel website * ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges Datasheet: Only available via NDA from ServerWorks - * ATI IXP200, IXP300, IXP400 and SB600 southbridges + * ATI IXP200, IXP300, IXP400, SB600 and SB700 southbridges Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge Datasheet: Publicly available at the SMSC website http://www.smsc.com diff --git a/Documentation/i2c/busses/i2c-taos-evm b/Documentation/i2c/busses/i2c-taos-evm new file mode 100644 index 0000000..9146e33 --- /dev/null +++ b/Documentation/i2c/busses/i2c-taos-evm @@ -0,0 +1,46 @@ +Kernel driver i2c-taos-evm + +Author: Jean Delvare <khali@linux-fr.org> + +This is a driver for the evaluation modules for TAOS I2C/SMBus chips. +The modules include an SMBus master with limited capabilities, which can +be controlled over the serial port. Virtually all evaluation modules +are supported, but a few lines of code need to be added for each new +module to instantiate the right I2C chip on the bus. Obviously, a driver +for the chip in question is also needed. + +Currently supported devices are: + +* TAOS TSL2550 EVM + +For addtional information on TAOS products, please see + http://www.taosinc.com/ + + +Using this driver +----------------- + +In order to use this driver, you'll need the serport driver, and the +inputattach tool, which is part of the input-utils package. The following +commands will tell the kernel that you have a TAOS EVM on the first +serial port: + +# modprobe serport +# inputattach --taos-evm /dev/ttyS0 + + +Technical details +----------------- + +Only 4 SMBus transaction types are supported by the TAOS evaluation +modules: +* Receive Byte +* Send Byte +* Read Byte +* Write Byte + +The communication protocol is text-based and pretty simple. It is +described in a PDF document on the CD which comes with the evaluation +module. The communication is rather slow, because the serial port has +to operate at 1200 bps. However, I don't think this is a big concern in +practice, as these modules are meant for evaluation and testing only. diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875 index 96fec56..a0cd8af 100644 --- a/Documentation/i2c/chips/max6875 +++ b/Documentation/i2c/chips/max6875 @@ -99,7 +99,7 @@ And then read the data or - count = i2c_smbus_read_i2c_block_data(fd, 0x84, buffer); + count = i2c_smbus_read_i2c_block_data(fd, 0x84, 16, buffer); The block read should read 16 bytes. 0x84 is the block read command. diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205 deleted file mode 100644 index 09407c9..0000000 --- a/Documentation/i2c/chips/x1205 +++ /dev/null @@ -1,38 +0,0 @@ -Kernel driver x1205 -=================== - -Supported chips: - * Xicor X1205 RTC - Prefix: 'x1205' - Addresses scanned: none - Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html - -Authors: - Karen Spearel <kas11@tampabay.rr.com>, - Alessandro Zummo <a.zummo@towertech.it> - -Description ------------ - -This module aims to provide complete access to the Xicor X1205 RTC. -Recently Xicor has merged with Intersil, but the chip is -still sold under the Xicor brand. - -This chip is located at address 0x6f and uses a 2-byte register addressing. -Two bytes need to be written to read a single register, while most -other chips just require one and take the second one as the data -to be written. To prevent corrupting unknown chips, the user must -explicitely set the probe parameter. - -example: - -modprobe x1205 probe=0,0x6f - -The module supports one more option, hctosys, which is used to set the -software clock from the x1205. On systems where the x1205 is the -only hardware rtc, this parameter could be used to achieve a correct -date/time earlier in the system boot sequence. - -example: - -modprobe x1205 probe=0,0x6f hctosys=1 diff --git a/Documentation/i2c/summary b/Documentation/i2c/summary index aea60bf..003c731 100644 --- a/Documentation/i2c/summary +++ b/Documentation/i2c/summary @@ -67,7 +67,6 @@ i2c-proc: The /proc/sys/dev/sensors interface for device (client) drivers Algorithm drivers ----------------- -i2c-algo-8xx: An algorithm for CPM's I2C device in Motorola 8xx processors (NOT BUILT BY DEFAULT) i2c-algo-bit: A bit-banging algorithm i2c-algo-pcf: A PCF 8584 style algorithm i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT) @@ -81,6 +80,5 @@ i2c-pcf-epp: PCF8584 on a EPP parallel port (uses i2c-algo-pcf) (NOT mkpatch i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit) i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT) i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit) -i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT) i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit) diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 3d8d36b..2c17003 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -571,7 +571,7 @@ SMBus communication u8 command, u8 length, u8 *values); extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, - u8 command, u8 *values); + u8 command, u8 length, u8 *values); These ones were removed in Linux 2.6.10 because they had no users, but could be added back later if needed: diff --git a/Documentation/i386/zero-page.txt b/Documentation/i386/zero-page.txt index c04a421..75b3680 100644 --- a/Documentation/i386/zero-page.txt +++ b/Documentation/i386/zero-page.txt @@ -37,6 +37,7 @@ Offset Type Description 0x1d0 unsigned long EFI memory descriptor map pointer 0x1d4 unsigned long EFI memory descriptor map size 0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb +0x1e4 unsigned long Scratch field for the kernel setup code 0x1e8 char number of entries in E820MAP (below) 0x1e9 unsigned char number of entries in EDDBUF (below) 0x1ea unsigned char number of entries in EDD_MBR_SIG_BUFFER (below) diff --git a/Documentation/ia64/aliasing-test.c b/Documentation/ia64/aliasing-test.c index d485256..773a814 100644 --- a/Documentation/ia64/aliasing-test.c +++ b/Documentation/ia64/aliasing-test.c @@ -19,6 +19,7 @@ #include <sys/mman.h> #include <sys/stat.h> #include <unistd.h> +#include <linux/pci.h> int sum; @@ -34,13 +35,19 @@ int map_mem(char *path, off_t offset, size_t length, int touch) return -1; } + if (fnmatch("/proc/bus/pci/*", path, 0) == 0) { + rc = ioctl(fd, PCIIOC_MMAP_IS_MEM); + if (rc == -1) + perror("PCIIOC_MMAP_IS_MEM ioctl"); + } + addr = mmap(NULL, length, PROT_READ|PROT_WRITE, MAP_SHARED, fd, offset); if (addr == MAP_FAILED) return 1; if (touch) { c = (int *) addr; - while (c < (int *) (offset + length)) + while (c < (int *) (addr + length)) sum += *c++; } @@ -54,7 +61,7 @@ int map_mem(char *path, off_t offset, size_t length, int touch) return 0; } -int scan_sysfs(char *path, char *file, off_t offset, size_t length, int touch) +int scan_tree(char *path, char *file, off_t offset, size_t length, int touch) { struct dirent **namelist; char *name, *path2; @@ -93,7 +100,7 @@ int scan_sysfs(char *path, char *file, off_t offset, size_t length, int touch) } else { r = lstat(path2, &buf); if (r == 0 && S_ISDIR(buf.st_mode)) { - rc = scan_sysfs(path2, file, offset, length, touch); + rc = scan_tree(path2, file, offset, length, touch); if (rc < 0) return rc; } @@ -238,10 +245,15 @@ int main() else fprintf(stderr, "FAIL: /dev/mem 0x0-0x100000 not accessible\n"); - scan_sysfs("/sys/class/pci_bus", "legacy_mem", 0, 0xA0000, 1); - scan_sysfs("/sys/class/pci_bus", "legacy_mem", 0xA0000, 0x20000, 0); - scan_sysfs("/sys/class/pci_bus", "legacy_mem", 0xC0000, 0x40000, 1); - scan_sysfs("/sys/class/pci_bus", "legacy_mem", 0, 1024*1024, 0); + scan_tree("/sys/class/pci_bus", "legacy_mem", 0, 0xA0000, 1); + scan_tree("/sys/class/pci_bus", "legacy_mem", 0xA0000, 0x20000, 0); + scan_tree("/sys/class/pci_bus", "legacy_mem", 0xC0000, 0x40000, 1); + scan_tree("/sys/class/pci_bus", "legacy_mem", 0, 1024*1024, 0); scan_rom("/sys/devices", "rom"); + + scan_tree("/proc/bus/pci", "??.?", 0, 0xA0000, 1); + scan_tree("/proc/bus/pci", "??.?", 0xA0000, 0x20000, 0); + scan_tree("/proc/bus/pci", "??.?", 0xC0000, 0x40000, 1); + scan_tree("/proc/bus/pci", "??.?", 0, 1024*1024, 0); } diff --git a/Documentation/ia64/aliasing.txt b/Documentation/ia64/aliasing.txt index 9a431a7..aa3e953 100644 --- a/Documentation/ia64/aliasing.txt +++ b/Documentation/ia64/aliasing.txt @@ -112,6 +112,18 @@ POTENTIAL ATTRIBUTE ALIASING CASES The /dev/mem mmap constraints apply. + mmap of /proc/bus/pci/.../??.? + + This is an MMIO mmap of PCI functions, which additionally may or + may not be requested as using the WC attribute. + + If WC is requested, and the region in kern_memmap is either WC + or UC, and the EFI memory map designates the region as WC, then + the WC mapping is allowed. + + Otherwise, the user mapping must use the same attribute as the + kernel mapping. + read/write of /dev/mem This uses copy_from_user(), which implicitly uses a kernel diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 09c184e..32c2e9d 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -433,6 +433,12 @@ tcp_workaround_signed_windows - BOOLEAN not receive a window scaling option from them. Default: 0 +tcp_dma_copybreak - INTEGER + Lower limit, in bytes, of the size of socket reads that will be + offloaded to a DMA copy engine, if one is present in the system + and CONFIG_NET_DMA is enabled. + Default: 4096 + CIPSOv4 Variables: cipso_cache_enable - BOOLEAN diff --git a/Documentation/pci.txt b/Documentation/pci.txt index d38261b..7754f5a 100644 --- a/Documentation/pci.txt +++ b/Documentation/pci.txt @@ -113,9 +113,6 @@ initialization with a pointer to a structure describing the driver (Please see Documentation/power/pci.txt for descriptions of PCI Power Management and the related functions.) - enable_wake Enable device to generate wake events from a low power - state. - shutdown Hook into reboot_notifier_list (kernel/sys.c). Intended to stop any idling DMA operations. Useful for enabling wake-on-lan (NIC) or changing @@ -299,7 +296,10 @@ If the PCI device can use the PCI Memory-Write-Invalidate transaction, call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval and also ensures that the cache line size register is set correctly. Check the return value of pci_set_mwi() as not all architectures -or chip-sets may support Memory-Write-Invalidate. +or chip-sets may support Memory-Write-Invalidate. Alternatively, +if Mem-Wr-Inval would be nice to have but is not required, call +pci_try_set_mwi() to have the system do its best effort at enabling +Mem-Wr-Inval. 3.2 Request MMIO/IOP resources diff --git a/Documentation/power/pci.txt b/Documentation/power/pci.txt index e00b099..dd8fe43 100644 --- a/Documentation/power/pci.txt +++ b/Documentation/power/pci.txt @@ -164,7 +164,6 @@ struct pci_driver: int (*suspend) (struct pci_dev *dev, pm_message_t state); int (*resume) (struct pci_dev *dev); - int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable); suspend @@ -251,42 +250,6 @@ The driver should update the current_state field in its pci_dev structure in this function, except for PM-capable devices when pci_set_power_state is used. -enable_wake ------------ - -Usage: - -if (dev->driver && dev->driver->enable_wake) - dev->driver->enable_wake(dev,state,enable); - -This callback is generally only relevant for devices that support the PCI PM -spec and have the ability to generate a PME# (Power Management Event Signal) -to wake the system up. (However, it is possible that a device may support -some non-standard way of generating a wake event on sleep.) - -Bits 15:11 of the PMC (Power Mgmt Capabilities) Register in a device's -PM Capabilities describe what power states the device supports generating a -wake event from: - -+------------------+ -| Bit | State | -+------------------+ -| 11 | D0 | -| 12 | D1 | -| 13 | D2 | -| 14 | D3hot | -| 15 | D3cold | -+------------------+ - -A device can use this to enable wake events: - - pci_enable_wake(dev,state,enable); - -Note that to enable PME# from D3cold, a value of 4 should be passed to -pci_enable_wake (since it uses an index into a bitmask). If a driver gets -a request to enable wake events from D3, two calls should be made to -pci_enable_wake (one for both D3hot and D3cold). - A reference implementation ------------------------- diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index 5b8d695..152b510 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -393,6 +393,9 @@ safest thing is to unmount all filesystems on removable media (such USB, Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays) before suspending; then remount them after resuming. +There is a work-around for this problem. For more information, see +Documentation/usb/persist.txt. + Q: I upgraded the kernel from 2.6.15 to 2.6.16. Both kernels were compiled with the similar configuration files. Anyway I found that suspend to disk (and resume) is much slower on 2.6.16 compared to diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt index 1d19256..8cfca17 100644 --- a/Documentation/sysctl/vm.txt +++ b/Documentation/sysctl/vm.txt @@ -31,6 +31,7 @@ Currently, these files are in /proc/sys/vm: - min_unmapped_ratio - min_slab_ratio - panic_on_oom +- mmap_min_address ============================================================== @@ -216,3 +217,17 @@ above-mentioned. The default value is 0. 1 and 2 are for failover of clustering. Please select either according to your policy of failover. + +============================================================== + +mmap_min_addr + +This file indicates the amount of address space which a user process will +be restricted from mmaping. Since kernel null dereference bugs could +accidentally operate based on the information in the first couple of pages +of memory userspace processes should not be allowed to write to them. By +default this value is set to 0 and no protections will be enforced by the +security module. Setting this value to something like 64k will allow the +vast majority of applications to work correctly and provide defense in depth +against future potential kernel bugs. + diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt new file mode 100644 index 0000000..42861bb --- /dev/null +++ b/Documentation/sysfs-rules.txt @@ -0,0 +1,166 @@ +Rules on how to access information in the Linux kernel sysfs + +The kernel exported sysfs exports internal kernel implementation-details +and depends on internal kernel structures and layout. It is agreed upon +by the kernel developers that the Linux kernel does not provide a stable +internal API. As sysfs is a direct export of kernel internal +structures, the sysfs interface can not provide a stable interface eighter, +it may always change along with internal kernel changes. + +To minimize the risk of breaking users of sysfs, which are in most cases +low-level userspace applications, with a new kernel release, the users +of sysfs must follow some rules to use an as abstract-as-possible way to +access this filesystem. The current udev and HAL programs already +implement this and users are encouraged to plug, if possible, into the +abstractions these programs provide instead of accessing sysfs +directly. + +But if you really do want or need to access sysfs directly, please follow +the following rules and then your programs should work with future +versions of the sysfs interface. + +- Do not use libsysfs + It makes assumptions about sysfs which are not true. Its API does not + offer any abstraction, it exposes all the kernel driver-core + implementation details in its own API. Therefore it is not better than + reading directories and opening the files yourself. + Also, it is not actively maintained, in the sense of reflecting the + current kernel-development. The goal of providing a stable interface + to sysfs has failed, it causes more problems, than it solves. It + violates many of the rules in this document. + +- sysfs is always at /sys + Parsing /proc/mounts is a waste of time. Other mount points are a + system configuration bug you should not try to solve. For test cases, + possibly support a SYSFS_PATH environment variable to overwrite the + applications behavior, but never try to search for sysfs. Never try + to mount it, if you are not an early boot script. + +- devices are only "devices" + There is no such thing like class-, bus-, physical devices, + interfaces, and such that you can rely on in userspace. Everything is + just simply a "device". Class-, bus-, physical, ... types are just + kernel implementation details, which should not be expected by + applications that look for devices in sysfs. + + The properties of a device are: + o devpath (/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0) + - identical to the DEVPATH value in the event sent from the kernel + at device creation and removal + - the unique key to the device at that point in time + - the kernels path to the device-directory without the leading + /sys, and always starting with with a slash + - all elements of a devpath must be real directories. Symlinks + pointing to /sys/devices must always be resolved to their real + target, and the target path must be used to access the device. + That way the devpath to the device matches the devpath of the + kernel used at event time. + - using or exposing symlink values as elements in a devpath string + is a bug in the application + + o kernel name (sda, tty, 0000:00:1f.2, ...) + - a directory name, identical to the last element of the devpath + - applications need to handle spaces and characters like '!' in + the name + + o subsystem (block, tty, pci, ...) + - simple string, never a path or a link + - retrieved by reading the "subsystem"-link and using only the + last element of the target path + + o driver (tg3, ata_piix, uhci_hcd) + - a simple string, which may contain spaces, never a path or a + link + - it is retrieved by reading the "driver"-link and using only the + last element of the target path + - devices which do not have "driver"-link, just do not have a + driver; copying the driver value in a child device context, is a + bug in the application + + o attributes + - the files in the device directory or files below a subdirectories + of the same device directory + - accessing attributes reached by a symlink pointing to another device, + like the "device"-link, is a bug in the application + + Everything else is just a kernel driver-core implementation detail, + that should not be assumed to be stable across kernel releases. + +- Properties of parent devices never belong into a child device. + Always look at the parent devices themselves for determining device + context properties. If the device 'eth0' or 'sda' does not have a + "driver"-link, then this device does not have a driver. Its value is empty. + Never copy any property of the parent-device into a child-device. Parent + device-properties may change dynamically without any notice to the + child device. + +- Hierarchy in a single device-tree + There is only one valid place in sysfs where hierarchy can be examined + and this is below: /sys/devices. + It is planned, that all device directories will end up in the tree + below this directory. + +- Classification by subsystem + There are currently three places for classification of devices: + /sys/block, /sys/class and /sys/bus. It is planned that these will + not contain any device-directories themselves, but only flat lists of + symlinks pointing to the unified /sys/devices tree. + All three places have completely different rules on how to access + device information. It is planned to merge all three + classification-directories into one place at /sys/subsystem, + following the layout of the bus-directories. All buses and + classes, including the converted block-subsystem, will show up + there. + The devices belonging to a subsystem will create a symlink in the + "devices" directory at /sys/subsystem/<name>/devices. + + If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be + ignored. If it does not exist, you have always to scan all three + places, as the kernel is free to move a subsystem from one place to + the other, as long as the devices are still reachable by the same + subsystem name. + + Assuming /sys/class/<subsystem> and /sys/bus/<subsystem>, or + /sys/block and /sys/class/block are not interchangeable, is a bug in + the application. + +- Block + The converted block-subsystem at /sys/class/block, or + /sys/subsystem/block will contain the links for disks and partitions + at the same level, never in a hierarchy. Assuming the block-subsytem to + contain only disks and not partition-devices in the same flat list is + a bug in the application. + +- "device"-link and <subsystem>:<kernel name>-links + Never depend on the "device"-link. The "device"-link is a workaround + for the old layout, where class-devices are not created in + /sys/devices/ like the bus-devices. If the link-resolving of a + device-directory does not end in /sys/devices/, you can use the + "device"-link to find the parent devices in /sys/devices/. That is the + single valid use of the "device"-link, it must never appear in any + path as an element. Assuming the existence of the "device"-link for + a device in /sys/devices/ is a bug in the application. + Accessing /sys/class/net/eth0/device is a bug in the application. + + Never depend on the class-specific links back to the /sys/class + directory. These links are also a workaround for the design mistake + that class-devices are not created in /sys/devices. If a device + directory does not contain directories for child devices, these links + may be used to find the child devices in /sys/class. That is the single + valid use of these links, they must never appear in any path as an + element. Assuming the existence of these links for devices which are + real child device directories in the /sys/devices tree, is a bug in + the application. + + It is planned to remove all these links when when all class-device + directories live in /sys/devices. + +- Position of devices along device chain can change. + Never depend on a specific parent device position in the devpath, + or the chain of parent devices. The kernel is free to insert devices into + the chain. You must always request the parent device you are looking for + by its subsystem value. You need to walk up the chain until you find + the device that matches the expected subsystem. Depending on a specific + position of a parent device, or exposing relative paths, using "../" to + access the chain of parents, is a bug in the application. + diff --git a/Documentation/usb/dma.txt b/Documentation/usb/dma.txt index 62844ae..e8b50b7 100644 --- a/Documentation/usb/dma.txt +++ b/Documentation/usb/dma.txt @@ -32,12 +32,15 @@ ELIMINATING COPIES It's good to avoid making CPUs copy data needlessly. The costs can add up, and effects like cache-trashing can impose subtle penalties. -- When you're allocating a buffer for DMA purposes anyway, use the buffer - primitives. Think of them as kmalloc and kfree that give you the right - kind of addresses to store in urb->transfer_buffer and urb->transfer_dma, - while guaranteeing that no hidden copies through DMA "bounce" buffers will - slow things down. You'd also set URB_NO_TRANSFER_DMA_MAP in - urb->transfer_flags: +- If you're doing lots of small data transfers from the same buffer all + the time, that can really burn up resources on systems which use an + IOMMU to manage the DMA mappings. It can cost MUCH more to set up and + tear down the IOMMU mappings with each request than perform the I/O! + + For those specific cases, USB has primitives to allocate less expensive + memory. They work like kmalloc and kfree versions that give you the right + kind of addresses to store in urb->transfer_buffer and urb->transfer_dma. + You'd also set URB_NO_TRANSFER_DMA_MAP in urb->transfer_flags: void *usb_buffer_alloc (struct usb_device *dev, size_t size, int mem_flags, dma_addr_t *dma); @@ -45,6 +48,10 @@ and effects like cache-trashing can impose subtle penalties. void usb_buffer_free (struct usb_device *dev, size_t size, void *addr, dma_addr_t dma); + Most drivers should *NOT* be using these primitives; they don't need + to use this type of memory ("dma-coherent"), and memory returned from + kmalloc() will work just fine. + For control transfers you can use the buffer primitives or not for each of the transfer buffer and setup buffer independently. Set the flag bits URB_NO_TRANSFER_DMA_MAP and URB_NO_SETUP_DMA_MAP to indicate which @@ -54,29 +61,39 @@ and effects like cache-trashing can impose subtle penalties. The memory buffer returned is "dma-coherent"; sometimes you might need to force a consistent memory access ordering by using memory barriers. It's not using a streaming DMA mapping, so it's good for small transfers on - systems where the I/O would otherwise tie up an IOMMU mapping. (See + systems where the I/O would otherwise thrash an IOMMU mapping. (See Documentation/DMA-mapping.txt for definitions of "coherent" and "streaming" DMA mappings.) Asking for 1/Nth of a page (as well as asking for N pages) is reasonably space-efficient. + On most systems the memory returned will be uncached, because the + semantics of dma-coherent memory require either bypassing CPU caches + or using cache hardware with bus-snooping support. While x86 hardware + has such bus-snooping, many other systems use software to flush cache + lines to prevent DMA conflicts. + - Devices on some EHCI controllers could handle DMA to/from high memory. - Driver probe() routines can notice this using a generic DMA call, then - tell higher level code (network, scsi, etc) about it like this: - if (dma_supported (&intf->dev, 0xffffffffffffffffULL)) - net->features |= NETIF_F_HIGHDMA; + Unfortunately, the current Linux DMA infrastructure doesn't have a sane + way to expose these capabilities ... and in any case, HIGHMEM is mostly a + design wart specific to x86_32. So your best bet is to ensure you never + pass a highmem buffer into a USB driver. That's easy; it's the default + behavior. Just don't override it; e.g. with NETIF_F_HIGHDMA. - That can eliminate dma bounce buffering of requests that originate (or - terminate) in high memory, in cases where the buffers aren't allocated - with usb_buffer_alloc() but instead are dma-mapped. + This may force your callers to do some bounce buffering, copying from + high memory to "normal" DMA memory. If you can come up with a good way + to fix this issue (for x86_32 machines with over 1 GByte of memory), + feel free to submit patches. WORKING WITH EXISTING BUFFERS Existing buffers aren't usable for DMA without first being mapped into the -DMA address space of the device. +DMA address space of the device. However, most buffers passed to your +driver can safely be used with such DMA mapping. (See the first section +of DMA-mapping.txt, titled "What memory is DMA-able?") - When you're using scatterlists, you can map everything at once. On some systems, this kicks in an IOMMU and turns the scatterlists into single @@ -114,3 +131,8 @@ DMA address space of the device. The calls manage urb->transfer_dma for you, and set URB_NO_TRANSFER_DMA_MAP so that usbcore won't map or unmap the buffer. The same goes for urb->setup_dma and URB_NO_SETUP_DMA_MAP for control requests. + +Note that several of those interfaces are currently commented out, since +they don't have current users. See the source code. Other than the dmasync +calls (where the underlying DMA primitives have changed), most of them can +easily be commented back in if you want to use them. diff --git a/Documentation/usb/persist.txt b/Documentation/usb/persist.txt new file mode 100644 index 0000000..df54d64 --- /dev/null +++ b/Documentation/usb/persist.txt @@ -0,0 +1,156 @@ + USB device persistence during system suspend + + Alan Stern <stern@rowland.harvard.edu> + + September 2, 2006 (Updated May 29, 2007) + + + What is the problem? + +According to the USB specification, when a USB bus is suspended the +bus must continue to supply suspend current (around 1-5 mA). This +is so that devices can maintain their internal state and hubs can +detect connect-change events (devices being plugged in or unplugged). +The technical term is "power session". + +If a USB device's power session is interrupted then the system is +required to behave as though the device has been unplugged. It's a +conservative approach; in the absence of suspend current the computer +has no way to know what has actually happened. Perhaps the same +device is still attached or perhaps it was removed and a different +device plugged into the port. The system must assume the worst. + +By default, Linux behaves according to the spec. If a USB host +controller loses power during a system suspend, then when the system +wakes up all the devices attached to that controller are treated as +though they had disconnected. This is always safe and it is the +"officially correct" thing to do. + +For many sorts of devices this behavior doesn't matter in the least. +If the kernel wants to believe that your USB keyboard was unplugged +while the system was asleep and a new keyboard was plugged in when the +system woke up, who cares? It'll still work the same when you type on +it. + +Unfortunately problems _can_ arise, particularly with mass-storage +devices. The effect is exactly the same as if the device really had +been unplugged while the system was suspended. If you had a mounted +filesystem on the device, you're out of luck -- everything in that +filesystem is now inaccessible. This is especially annoying if your +root filesystem was located on the device, since your system will +instantly crash. + +Loss of power isn't the only mechanism to worry about. Anything that +interrupts a power session will have the same effect. For example, +even though suspend current may have been maintained while the system +was asleep, on many systems during the initial stages of wakeup the +firmware (i.e., the BIOS) resets the motherboard's USB host +controllers. Result: all the power sessions are destroyed and again +it's as though you had unplugged all the USB devices. Yes, it's +entirely the BIOS's fault, but that doesn't do _you_ any good unless +you can convince the BIOS supplier to fix the problem (lots of luck!). + +On many systems the USB host controllers will get reset after a +suspend-to-RAM. On almost all systems, no suspend current is +available during hibernation (also known as swsusp or suspend-to-disk). +You can check the kernel log after resuming to see if either of these +has happened; look for lines saying "root hub lost power or was reset". + +In practice, people are forced to unmount any filesystems on a USB +device before suspending. If the root filesystem is on a USB device, +the system can't be suspended at all. (All right, it _can_ be +suspended -- but it will crash as soon as it wakes up, which isn't +much better.) + + + What is the solution? + +Setting CONFIG_USB_PERSIST will cause the kernel to work around these +issues. It enables a mode in which the core USB device data +structures are allowed to persist across a power-session disruption. +It works like this. If the kernel sees that a USB host controller is +not in the expected state during resume (i.e., if the controller was +reset or otherwise had lost power) then it applies a persistence check +to each of the USB devices below that controller for which the +"persist" attribute is set. It doesn't try to resume the device; that +can't work once the power session is gone. Instead it issues a USB +port reset and then re-enumerates the device. (This is exactly the +same thing that happens whenever a USB device is reset.) If the +re-enumeration shows that the device now attached to that port has the +same descriptors as before, including the Vendor and Product IDs, then +the kernel continues to use the same device structure. In effect, the +kernel treats the device as though it had merely been reset instead of +unplugged. + +If no device is now attached to the port, or if the descriptors are +different from what the kernel remembers, then the treatment is what +you would expect. The kernel destroys the old device structure and +behaves as though the old device had been unplugged and a new device +plugged in, just as it would without the CONFIG_USB_PERSIST option. + +The end result is that the USB device remains available and usable. +Filesystem mounts and memory mappings are unaffected, and the world is +now a good and happy place. + +Note that even when CONFIG_USB_PERSIST is set, the "persist" feature +will be applied only to those devices for which it is enabled. You +can enable the feature by doing (as root): + + echo 1 >/sys/bus/usb/devices/.../power/persist + +where the "..." should be filled in the with the device's ID. Disable +the feature by writing 0 instead of 1. For hubs the feature is +automatically and permanently enabled, so you only have to worry about +setting it for devices where it really matters. + + + Is this the best solution? + +Perhaps not. Arguably, keeping track of mounted filesystems and +memory mappings across device disconnects should be handled by a +centralized Logical Volume Manager. Such a solution would allow you +to plug in a USB flash device, create a persistent volume associated +with it, unplug the flash device, plug it back in later, and still +have the same persistent volume associated with the device. As such +it would be more far-reaching than CONFIG_USB_PERSIST. + +On the other hand, writing a persistent volume manager would be a big +job and using it would require significant input from the user. This +solution is much quicker and easier -- and it exists now, a giant +point in its favor! + +Furthermore, the USB_PERSIST option applies to _all_ USB devices, not +just mass-storage devices. It might turn out to be equally useful for +other device types, such as network interfaces. + + + WARNING: Using CONFIG_USB_PERSIST can be dangerous!! + +When recovering an interrupted power session the kernel does its best +to make sure the USB device hasn't been changed; that is, the same +device is still plugged into the port as before. But the checks +aren't guaranteed to be 100% accurate. + +If you replace one USB device with another of the same type (same +manufacturer, same IDs, and so on) there's an excellent chance the +kernel won't detect the change. Serial numbers and other strings are +not compared. In many cases it wouldn't help if they were, because +manufacturers frequently omit serial numbers entirely in their +devices. + +Furthermore it's quite possible to leave a USB device exactly the same +while changing its media. If you replace the flash memory card in a +USB card reader while the system is asleep, the kernel will have no +way to know you did it. The kernel will assume that nothing has +happened and will continue to use the partition tables, inodes, and +memory mappings for the old card. + +If the kernel gets fooled in this way, it's almost certain to cause +data corruption and to crash your system. You'll have no one to blame +but yourself. + +YOU HAVE BEEN WARNED! USE AT YOUR OWN RISK! + +That having been said, most of the time there shouldn't be any trouble +at all. The "persist" feature can be extremely useful. Make the most +of it. |
