diff options
Diffstat (limited to 'Documentation')
30 files changed, 234 insertions, 884 deletions
diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index f517008..cc63f30 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -276,7 +276,7 @@ X!Isound/sound_firmware.c </para> <sect1><title>Frame Buffer Memory</title> -!Edrivers/video/fbmem.c +!Edrivers/video/fbdev/core/fbmem.c </sect1> <!-- <sect1><title>Frame Buffer Console</title> @@ -284,7 +284,7 @@ X!Edrivers/video/console/fbcon.c </sect1> --> <sect1><title>Frame Buffer Colormap</title> -!Edrivers/video/fbcmap.c +!Edrivers/video/fbdev/core/fbcmap.c </sect1> <!-- FIXME: drivers/video/fbgen.c has no docs, which stuffs up the sgml. Comment @@ -294,11 +294,11 @@ X!Idrivers/video/fbgen.c </sect1> KAO --> <sect1><title>Frame Buffer Video Mode Database</title> -!Idrivers/video/modedb.c -!Edrivers/video/modedb.c +!Idrivers/video/fbdev/core/modedb.c +!Edrivers/video/fbdev/core/modedb.c </sect1> <sect1><title>Frame Buffer Macintosh Video Mode Database</title> -!Edrivers/video/macmodes.c +!Edrivers/video/fbdev/macmodes.c </sect1> <sect1><title>Frame Buffer Fonts</title> <para> diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 702c4474..677a025 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -2287,6 +2287,11 @@ void intel_crt_init(struct drm_device *dev) !Edrivers/gpu/drm/drm_crtc_helper.c </sect2> <sect2> + <title>Output Probing Helper Functions Reference</title> +!Pdrivers/gpu/drm/drm_probe_helper.c output probing helper overview +!Edrivers/gpu/drm/drm_probe_helper.c + </sect2> + <sect2> <title>fbdev Helper Functions Reference</title> !Pdrivers/gpu/drm/drm_fb_helper.c fbdev helpers !Edrivers/gpu/drm/drm_fb_helper.c diff --git a/Documentation/devicetree/bindings/arm/arch_timer.txt b/Documentation/devicetree/bindings/arm/arch_timer.txt index 06fc760..37b2caf 100644 --- a/Documentation/devicetree/bindings/arm/arch_timer.txt +++ b/Documentation/devicetree/bindings/arm/arch_timer.txt @@ -19,6 +19,9 @@ to deliver its interrupts via SPIs. - clock-frequency : The frequency of the main counter, in Hz. Optional. +- always-on : a boolean property. If present, the timer is powered through an + always-on power domain, therefore it never loses context. + Example: timer { diff --git a/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt new file mode 100644 index 0000000..925ecbf --- /dev/null +++ b/Documentation/devicetree/bindings/arm/marvell,kirkwood.txt @@ -0,0 +1,97 @@ +Marvell Kirkwood SoC Family Device Tree Bindings +------------------------------------------------ + +Boards with a SoC of the Marvell Kirkwook family, eg 88f6281 + +* Required root node properties: +compatible: must contain "marvell,kirkwood" + +In addition, the above compatible shall be extended with the specific +SoC. Currently known SoC compatibles are: + +"marvell,kirkwood-88f6192" +"marvell,kirkwood-88f6281" +"marvell,kirkwood-88f6282" +"marvell,kirkwood-88f6283" +"marvell,kirkwood-88f6702" +"marvell,kirkwood-98DX4122" + +And in addition, the compatible shall be extended with the specific +board. Currently known boards are: + +"buffalo,lschlv2" +"buffalo,lsxhl" +"buffalo,lsxl" +"dlink,dns-320" +"dlink,dns-320-a1" +"dlink,dns-325" +"dlink,dns-325-a1" +"dlink,dns-kirkwood" +"excito,b3" +"globalscale,dreamplug-003-ds2001" +"globalscale,guruplug" +"globalscale,guruplug-server-plus" +"globalscale,sheevaplug" +"globalscale,sheevaplug" +"globalscale,sheevaplug-esata" +"globalscale,sheevaplug-esata-rev13" +"iom,iconnect" +"iom,iconnect-1.1" +"iom,ix2-200" +"keymile,km_kirkwood" +"lacie,cloudbox" +"lacie,inetspace_v2" +"lacie,laplug" +"lacie,netspace_lite_v2" +"lacie,netspace_max_v2" +"lacie,netspace_mini_v2" +"lacie,netspace_v2" +"marvell,db-88f6281-bp" +"marvell,db-88f6282-bp" +"marvell,mv88f6281gtw-ge" +"marvell,rd88f6281" +"marvell,rd88f6281" +"marvell,rd88f6281-a0" +"marvell,rd88f6281-a1" +"mpl,cec4" +"mpl,cec4-10" +"netgear,readynas" +"netgear,readynas" +"netgear,readynas-duo-v2" +"netgear,readynas-nv+-v2" +"plathome,openblocks-a6" +"plathome,openblocks-a7" +"raidsonic,ib-nas6210" +"raidsonic,ib-nas6210-b" +"raidsonic,ib-nas6220" +"raidsonic,ib-nas6220-b" +"raidsonic,ib-nas62x0" +"seagate,dockstar" +"seagate,goflexnet" +"synology,ds109" +"synology,ds110jv10" +"synology,ds110jv20" +"synology,ds110jv30" +"synology,ds111" +"synology,ds209" +"synology,ds210jv10" +"synology,ds210jv20" +"synology,ds212" +"synology,ds212jv10" +"synology,ds212jv20" +"synology,ds212pv10" +"synology,ds409" +"synology,ds409slim" +"synology,ds410j" +"synology,ds411" +"synology,ds411j" +"synology,ds411slim" +"synology,ds413jv10" +"synology,rs212" +"synology,rs409" +"synology,rs411" +"synology,rs812" +"usi,topkick" +"usi,topkick-1281P2" +"zyxel,nsa310" +"zyxel,nsa310a" diff --git a/Documentation/devicetree/bindings/ata/apm-xgene.txt b/Documentation/devicetree/bindings/ata/apm-xgene.txt index 7bcfbf5..a668f0e 100644 --- a/Documentation/devicetree/bindings/ata/apm-xgene.txt +++ b/Documentation/devicetree/bindings/ata/apm-xgene.txt @@ -24,6 +24,7 @@ Required properties: * "sata-phy" for the SATA 6.0Gbps PHY Optional properties: +- dma-coherent : Present if dma operations are coherent - status : Shall be "ok" if enabled or "disabled" if disabled. Default is "ok". @@ -55,6 +56,7 @@ Example: <0x0 0x1f22e000 0x0 0x1000>, <0x0 0x1f227000 0x0 0x1000>; interrupts = <0x0 0x87 0x4>; + dma-coherent; status = "ok"; clocks = <&sataclk 0>; phys = <&phy2 0>; @@ -69,6 +71,7 @@ Example: <0x0 0x1f23e000 0x0 0x1000>, <0x0 0x1f237000 0x0 0x1000>; interrupts = <0x0 0x88 0x4>; + dma-coherent; status = "ok"; clocks = <&sataclk 0>; phys = <&phy3 0>; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 71724d0..bef86e5 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -13,8 +13,22 @@ ad,ad7414 SMBus/I2C Digital Temperature Sensor in 6-Pin SOT with SMBus Alert an ad,adm9240 ADM9240: Complete System Hardware Monitor for uProcessor-Based Systems adi,adt7461 +/-1C TDM Extended Temp Range I.C adt7461 +/-1C TDM Extended Temp Range I.C +adi,adt7473 +/-1C TDM Extended Temp Range I.C +adi,adt7475 +/-1C TDM Extended Temp Range I.C +adi,adt7476 +/-1C TDM Extended Temp Range I.C +adi,adt7490 +/-1C TDM Extended Temp Range I.C at,24c08 i2c serial eeprom (24cxx) +atmel,24c00 i2c serial eeprom (24cxx) +atmel,24c01 i2c serial eeprom (24cxx) atmel,24c02 i2c serial eeprom (24cxx) +atmel,24c04 i2c serial eeprom (24cxx) +atmel,24c16 i2c serial eeprom (24cxx) +atmel,24c32 i2c serial eeprom (24cxx) +atmel,24c64 i2c serial eeprom (24cxx) +atmel,24c128 i2c serial eeprom (24cxx) +atmel,24c256 i2c serial eeprom (24cxx) +atmel,24c512 i2c serial eeprom (24cxx) +atmel,24c1024 i2c serial eeprom (24cxx) atmel,at97sc3204t i2c trusted platform module (TPM) capella,cm32181 CM32181: Ambient Light Sensor catalyst,24c32 i2c serial eeprom @@ -46,8 +60,10 @@ maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface mc,rv3029c2 Real Time Clock Module with I2C-Bus +national,lm63 Temperature sensor with integrated fan control national,lm75 I2C TEMP SENSOR national,lm80 Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor +national,lm85 Temperature sensor with integrated fan control national,lm92 ±0.33°C Accurate, 12-Bit + Sign Temperature Sensor and Thermal Window Comparator with Two-Wire Interface nuvoton,npct501 i2c trusted platform module (TPM) nxp,pca9556 Octal SMBus and I2C registered interface diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index 9ecd43d..3fc3605 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -10,7 +10,7 @@ The following properties are common to the Ethernet controllers: - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in ePAPR). - phy-mode: string, operation mode of the PHY interface; supported values are - "mii", "gmii", "sgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", + "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii"; this is now a de-facto standard property; - phy-connection-type: the same as "phy-mode" property but described in ePAPR; diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt index 636f0ac..2a60cd3 100644 --- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt +++ b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt @@ -23,5 +23,5 @@ gmac0: ethernet@ff700000 { interrupt-names = "macirq"; mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ clocks = <&emac_0_clk>; - clocks-names = "stmmaceth"; + clock-names = "stmmaceth"; }; diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 80c1fb8..a2acd2b 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -33,7 +33,7 @@ Optional properties: - max-frame-size: See ethernet.txt file in the same directory - clocks: If present, the first clock should be the GMAC main clock, further clocks may be specified in derived bindings. -- clocks-names: One name for each entry in the clocks property, the +- clock-names: One name for each entry in the clocks property, the first one should be "stmmaceth". Examples: diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt index c119deb..67a5db9 100644 --- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt @@ -119,7 +119,7 @@ Optional Properties (for HDMI pins): Example: // pin controller node pinctrl@35004800 { - compatible = "brcmbcm11351-pinctrl"; + compatible = "brcm,bcm11351-pinctrl"; reg = <0x35004800 0x430>; // pin configuration node diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt index 4bd5be0..26bcb18 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt @@ -83,7 +83,7 @@ Example: reg = <0xfe61f080 0x4>; reg-names = "irqmux"; interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0xfe610000 0x5000>; PIO0: gpio@fe610000 { @@ -165,7 +165,7 @@ sdhci0:sdhci@fe810000{ interrupt-parent = <&PIO3>; #interrupt-cells = <2>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */ - interrupts-names = "card-detect"; + interrupt-names = "card-detect"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_mmc>; }; diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt index 1984bdf..3ca0133 100644 --- a/Documentation/devicetree/bindings/serial/efm32-uart.txt +++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt @@ -1,7 +1,7 @@ * Energymicro efm32 UART Required properties: -- compatible : Should be "efm32,uart" +- compatible : Should be "energymicro,efm32-uart" - reg : Address and length of the register set - interrupts : Should contain uart interrupt @@ -13,7 +13,7 @@ Optional properties: Example: uart@0x4000c400 { - compatible = "efm32,uart"; + compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15>; efm32,location = <0>; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index 569b26c4..60ca079 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -47,7 +47,7 @@ mcasp0: mcasp0@1d00000 { reg = <0x100000 0x3000>; reg-names "mpu"; interrupts = <82>, <83>; - interrupts-names = "tx", "rx"; + interrupt-names = "tx", "rx"; op-mode = <0>; /* MCASP_IIS_MODE */ tdm-slots = <2>; serial-dir = < diff --git a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt index 74c66de..eff12be 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt @@ -13,6 +13,9 @@ Required properties: "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP) - reg - <int> - I2C slave address +- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply, + DVDD-supply : power supplies for the device as covered in + Documentation/devicetree/bindings/regulator/regulator.txt Optional properties: @@ -24,9 +27,6 @@ Optional properties: 3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD If this node is not mentioned or if the value is unknown, then micbias is set to 2.0V. -- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply, - DVDD-supply : power supplies for the device as covered in - Documentation/devicetree/bindings/regulator/regulator.txt CODEC output pins: * HPL diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 0f01c9b..abc3080 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -22,6 +22,7 @@ auo AU Optronics Corporation avago Avago Technologies bosch Bosch Sensortec GmbH brcm Broadcom Corporation +buffalo Buffalo, Inc. calxeda Calxeda capella Capella Microsystems, Inc cavium Cavium, Inc. @@ -33,15 +34,18 @@ cortina Cortina Systems, Inc. crystalfontz Crystalfontz America, Inc. dallas Maxim Integrated Products (formerly Dallas Semiconductor) davicom DAVICOM Semiconductor, Inc. -dlink D-Link Systems, Inc. denx Denx Software Engineering +digi Digi International Inc. +dlink D-Link Corporation dmo Data Modul AG +ebv EBV Elektronik edt Emerging Display Technologies emmicro EM Microelectronic epfl Ecole Polytechnique Fédérale de Lausanne epson Seiko Epson Corp. est ESTeem Wireless Modems eukrea Eukréa Electromatique +excito Excito fsl Freescale Semiconductor GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc. gef GE Fanuc Intelligent Platforms Embedded Systems, Inc. @@ -53,13 +57,17 @@ haoyu Haoyu Microelectronic Co. Ltd. hisilicon Hisilicon Limited. honeywell Honeywell hp Hewlett Packard +i2se I2SE GmbH ibm International Business Machines (IBM) idt Integrated Device Technologies, Inc. +iom Iomega Corporation img Imagination Technologies Ltd. intel Intel Corporation intercontrol Inter Control Group +isee ISEE 2007 S.L. isl Intersil karo Ka-Ro electronics GmbH +keymile Keymile GmbH lacie LaCie lantiq Lantiq Semiconductor lg LG Corporation @@ -70,9 +78,12 @@ maxim Maxim Integrated Products microchip Microchip Technology Inc. mosaixtech Mosaix Technologies, Inc. moxa Moxa +mpl MPL AG +mxicy Macronix International Co., Ltd. national National Semiconductor neonode Neonode Inc. netgear NETGEAR +newhaven Newhaven Display International nintendo Nintendo nokia Nokia nvidia NVIDIA @@ -82,10 +93,12 @@ opencores OpenCores.org panasonic Panasonic Corporation phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd +plathome Plat'Home Co., Ltd. powervr PowerVR (deprecated, use img) qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc qnap QNAP Systems, Inc. +raidsonic RaidSonic Technology GmbH ralink Mediatek/Ralink Technology Corp. ramtron Ramtron International realtek Realtek Semiconductor Corp. @@ -95,6 +108,7 @@ rockchip Fuzhou Rockchip Electronics Co., Ltd samsung Samsung Semiconductor sbs Smart Battery System schindler Schindler +seagate Seagate Technology PLC sil Silicon Image silabs Silicon Laboratories simtek @@ -111,6 +125,7 @@ ti Texas Instruments tlm Trusted Logic Mobility toshiba Toshiba Corporation toumaz Toumaz +usi Universal Scientifc Industrial Co., Ltd. v3 V3 Semiconductor via VIA Technologies, Inc. voipac Voipac Technologies s.r.o. @@ -119,3 +134,4 @@ wlf Wolfson Microelectronics wm Wondermedia Technologies, Inc. xes Extreme Engineering Solutions (X-ES) xlnx Xilinx +zyxel ZyXEL Communications Corp. diff --git a/Documentation/ja_JP/HOWTO b/Documentation/ja_JP/HOWTO index 0091a82..b61885c 100644 --- a/Documentation/ja_JP/HOWTO +++ b/Documentation/ja_JP/HOWTO @@ -315,7 +315,7 @@ Andrew Morton が Linux-kernel メーリングリストにカーネルリリー もし、3.x.y カーネルが存在しない場合には、番号が一番大きい 3.x が 最新の安定版カーネルです。 -3.x.y は "stable" チーム <stable@kernel.org> でメンテされており、必 +3.x.y は "stable" チーム <stable@vger.kernel.org> でメンテされており、必 要に応じてリリースされます。通常のリリース期間は 2週間毎ですが、差し迫っ た問題がなければもう少し長くなることもあります。セキュリティ関連の問題 の場合はこれに対してだいたいの場合、すぐにリリースがされます。 diff --git a/Documentation/ja_JP/stable_kernel_rules.txt b/Documentation/ja_JP/stable_kernel_rules.txt index 1426583..9dbda9b 100644 --- a/Documentation/ja_JP/stable_kernel_rules.txt +++ b/Documentation/ja_JP/stable_kernel_rules.txt @@ -50,16 +50,16 @@ linux-2.6.29/Documentation/stable_kernel_rules.txt -stable ツリーにパッチを送付する手続き- - - 上記の規則に従っているかを確認した後に、stable@kernel.org にパッチ + - 上記の規則に従っているかを確認した後に、stable@vger.kernel.org にパッチ を送る。 - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合 には NAK を受け取る。この反応は開発者たちのスケジュールによって、数 日かかる場合がある。 - もし受け取られたら、パッチは他の開発者たちと関連するサブシステムの メンテナーによるレビューのために -stable キューに追加される。 - - パッチに stable@kernel.org のアドレスが付加されているときには、それ + - パッチに stable@vger.kernel.org のアドレスが付加されているときには、それ が Linus のツリーに入る時に自動的に stable チームに email される。 - - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ + - セキュリティパッチはこのエイリアス (stable@vger.kernel.org) に送られるべ きではなく、代わりに security@kernel.org のアドレスに送られる。 レビューサイクル- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 03e50b4..4384217 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -804,13 +804,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. dhash_entries= [KNL] Set number of hash buckets for dentry cache. - digi= [HW,SERIAL] - IO parameters + enable/disable command. - - digiepca= [HW,SERIAL] - See drivers/char/README.epca and - Documentation/serial/digiepca.txt. - disable= [IPV6] See Documentation/networking/ipv6.txt. @@ -2939,9 +2932,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. rhash_entries= [KNL,NET] Set number of hash buckets for route cache - riscom8= [HW,SERIAL] - Format: <io_board1>[,<io_board2>[,...<io_boardN>]] - ro [KNL] Mount root device read-only on boot root= [KNL] Root filesystem @@ -3083,9 +3073,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. sonypi.*= [HW] Sony Programmable I/O Control Device driver See Documentation/laptops/sonypi.txt - specialix= [HW,SERIAL] Specialix multi-serial port adapter - See Documentation/serial/specialix.txt. - spia_io_base= [HW,MTD] spia_fio_base= spia_pedr= diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt index 76d80a6..4c8e142 100644 --- a/Documentation/magic-number.txt +++ b/Documentation/magic-number.txt @@ -63,8 +63,6 @@ Magic Name Number Structure File PG_MAGIC 'P' pg_{read,write}_hdr include/linux/pg.h CMAGIC 0x0111 user include/linux/a.out.h MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h -RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h -SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h @@ -82,7 +80,6 @@ STRIP_MAGIC 0x5303 strip drivers/net/strip.c X25_ASY_MAGIC 0x5303 x25_asy drivers/net/x25_asy.h SIXPACK_MAGIC 0x5304 sixpack drivers/net/hamradio/6pack.h AX25_MAGIC 0x5316 ax_disp drivers/net/mkiss.h -ESP_MAGIC 0x53ee esp_struct drivers/char/esp.h TTY_MAGIC 0x5401 tty_struct include/linux/tty.h MGSL_MAGIC 0x5401 mgsl_info drivers/char/synclink.c TTY_DRIVER_MAGIC 0x5402 tty_driver include/linux/tty_driver.h @@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h CG_MAGIC 0x00090255 ufs_cylinder_group include/linux/ufs_fs.h -A2232_MAGIC 0x000a2232 gs_port drivers/char/ser_a2232.h RPORT_MAGIC 0x00525001 r_port drivers/char/rocket_int.h LSEMAGIC 0x05091998 lse drivers/fc4/fc.c GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str drivers/scsi/gdth_ioctl.h RIEBL_MAGIC 0x09051990 drivers/net/atarilance.c -RIO_MAGIC 0x12345678 gs_port drivers/char/rio/rio_linux.c -SX_MAGIC 0x12345678 gs_port drivers/char/sx.h NBD_REQUEST_MAGIC 0x12560953 nbd_request include/linux/nbd.h RED_MAGIC2 0x170fc2a5 (any) mm/slab.c BAYCOM_MAGIC 0x19730510 baycom_state drivers/net/baycom_epp.c @@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC 0x49344C01 modem_info include/linux/isdn.h CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info drivers/s390/net/ctctty.c ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_lib.h SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c -STLI_BOARDMAGIC 0x4bc6c825 stlibrd include/linux/istallion.h CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c @@ -127,10 +120,8 @@ SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h RED_MAGIC1 0x5a2cf071 (any) mm/slab.c -STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h -EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c @@ -142,17 +133,14 @@ SLOT_MAGIC 0x67267322 slot drivers/hotplug/acpiphp.h LO_MAGIC 0x68797548 nbd_device include/linux/nbd.h OPROFILE_MAGIC 0x6f70726f super_block drivers/oprofile/oprofilefs.h M3_STATE_MAGIC 0x734d724d m3_state sound/oss/maestro3.c -STL_PANELMAGIC 0x7ef621a1 stlpanel include/linux/stallion.h VMALLOC_MAGIC 0x87654320 snd_alloc_track sound/core/memory.c KMALLOC_MAGIC 0x87654321 snd_alloc_track sound/core/memory.c PWC_MAGIC 0x89DC10AB pwc_device drivers/usb/media/pwc.h NBD_REPLY_MAGIC 0x96744668 nbd_reply include/linux/nbd.h -STL_BOARDMAGIC 0xa2267f52 stlbrd include/linux/stallion.h ENI155_MAGIC 0xa54b872d midway_eprom drivers/atm/eni.h SCI_MAGIC 0xbabeface gs_port drivers/char/sh-sci.h CODA_MAGIC 0xC0DAC0DA coda_file_info fs/coda/coda_fs_i.h DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram drivers/scsi/gdth.h -STLI_PORTMAGIC 0xe671c7a1 stliport include/linux/istallion.h YAM_MAGIC 0xF10A7654 yam_port drivers/net/hamradio/yam.c CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX index f9c6b5e..8021a9f 100644 --- a/Documentation/serial/00-INDEX +++ b/Documentation/serial/00-INDEX @@ -2,23 +2,15 @@ - this file. README.cycladesZ - info on Cyclades-Z firmware loading. -digiepca.txt - - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. driver - intro to the low level serial driver. moxa-smartio - file with info on installing/using Moxa multiport serial driver. n_gsm.txt - GSM 0710 tty multiplexer howto. -riscom8.txt - - notes on using the RISCom/8 multi-port serial driver. rocket.txt - info on the Comtrol RocketPort multiport serial driver. serial-rs485.txt - info about RS485 structures and support in the kernel. -specialix.txt - - info on hardware/driver for specialix IO8+ multiport serial card. -sx.txt - - info on the Specialix SX/SI multiport serial driver. tty.txt - guide to the locking policies of the tty layer. diff --git a/Documentation/serial/digiepca.txt b/Documentation/serial/digiepca.txt deleted file mode 100644 index f2560e2..0000000 --- a/Documentation/serial/digiepca.txt +++ /dev/null @@ -1,98 +0,0 @@ -NOTE: This driver is obsolete. Digi provides a 2.6 driver (dgdm) at -http://www.digi.com for PCI cards. They no longer maintain this driver, -and have no 2.6 driver for ISA cards. - -This driver requires a number of user-space tools. They can be acquired from -http://www.digi.com, but only works with 2.4 kernels. - - -The Digi Intl. epca driver. ----------------------------- -The Digi Intl. epca driver for Linux supports the following boards: - -Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve -Digi EISA/Xem, PCI/Xem, PCI/Xr - -Limitations: ------------- -Currently the driver only autoprobes for supported PCI boards. - -The Linux MAKEDEV command does not support generating the Digiboard -Devices. Users executing digiConfig to setup EISA and PC series cards -will have their device nodes automatically constructed (cud?? for ~CLOCAL, -and ttyD?? for CLOCAL). Users wishing to boot their board from the LILO -prompt, or those users booting PCI cards may use buildDIGI to construct -the necessary nodes. - -Notes: ------- -This driver may be configured via LILO. For users who have already configured -their driver using digiConfig, configuring from LILO will override previous -settings. Multiple boards may be configured by issuing multiple LILO command -lines. For examples see the bottom of this document. - -Device names start at 0 and continue up. Beware of this as previous Digi -drivers started device names with 1. - -PCI boards are auto-detected and configured by the driver. PCI boards will -be allocated device numbers (internally) beginning with the lowest PCI slot -first. In other words a PCI card in slot 3 will always have higher device -nodes than a PCI card in slot 1. - -LILO config examples: ---------------------- -Using LILO's APPEND command, a string of comma separated identifiers or -integers can be used to configure supported boards. The six values in order -are: - - Enable/Disable this card or Override, - Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), - EISA/Xem (3), PC/64Xe (4), PC/Xi (5), - Enable/Disable alternate pin arrangement, - Number of ports on this card, - I/O Port where card is configured (in HEX if using string identifiers), - Base of memory window (in HEX if using string identifiers), - -NOTE : PCI boards are auto-detected and configured. Do not attempt to -configure PCI boards with the LILO append command. If you wish to override -previous configuration data (As set by digiConfig), but you do not wish to -configure any specific card (Example if there are PCI cards in the system) -the following override command will accomplish this: --> append="digi=2" - -Samples: - append="digiepca=E,PC/Xe,D,16,200,D0000" - or - append="digi=1,0,0,16,512,851968" - -Supporting Tools: ------------------ -Supporting tools include digiDload, digiConfig, buildPCI, and ditty. See -drivers/char/README.epca for more details. Note, -this driver REQUIRES that digiDload be executed prior to it being used. -Failure to do this will result in an ENODEV error. - -Documentation: --------------- -Complete documentation for this product may be found in the tool package. - -Sources of information and support: ------------------------------------ -Digi Intl. support site for this product: - --> http://www.digi.com - -Acknowledgments: ----------------- -Much of this work (And even text) was derived from a similar document -supporting the original public domain DigiBoard driver Copyright (C) -1994,1995 Troy De Jongh. Many thanks to Christoph Lameter -(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored -and contributed to the original document. - -Changelog: ----------- -10-29-04: Update status of driver, remove dead links in document - James Nelson <james4765@gmail.com> - -2000 (?) Original Document diff --git a/Documentation/serial/riscom8.txt b/Documentation/serial/riscom8.txt deleted file mode 100644 index 14f61fd..0000000 --- a/Documentation/serial/riscom8.txt +++ /dev/null @@ -1,36 +0,0 @@ -* NOTE - this is an unmaintained driver. The original author cannot be located. - -SDL Communications is now SBS Technologies, and does not have any -information on these ancient ISA cards on their website. - -James Nelson <james4765@gmail.com> - 12-12-2004 - - This is the README for RISCom/8 multi-port serial driver - (C) 1994-1996 D.Gorodchanin - See file LICENSE for terms and conditions. - -NOTE: English is not my native language. - I'm sorry for any mistakes in this text. - -Misc. notes for RISCom/8 serial driver, in no particular order :) - -1) This driver can support up to 4 boards at time. - Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for - setting I/O base addresses for boards. If you compile driver - as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..." - -2) The driver partially supports famous 'setserial' program, you can use almost - any of its options, excluding port & irq settings. - -3) There are some misc. defines at the beginning of riscom8.c, please read the - comments and try to change some of them in case of problems. - -4) I consider the current state of the driver as BETA. - -5) SDL Communications WWW page is http://www.sdlcomm.com. - -6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries. - -7) Minor numbers for first board are 0-7, for second 8-15, etc. - -22 Apr 1996. diff --git a/Documentation/serial/specialix.txt b/Documentation/serial/specialix.txt deleted file mode 100644 index 6eb6f3a..0000000 --- a/Documentation/serial/specialix.txt +++ /dev/null @@ -1,383 +0,0 @@ - - specialix.txt -- specialix IO8+ multiport serial driver readme. - - - - Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - - Specialix pays for the development and support of this driver. - Please DO contact io8-linux@specialix.co.uk if you require - support. - - This driver was developed in the BitWizard linux device - driver service. If you require a linux device driver for your - product, please contact devices@BitWizard.nl for a quote. - - This code is firmly based on the riscom/8 serial driver, - written by Dmitry Gorodchanin. The specialix IO8+ card - programming information was obtained from the CL-CD1865 Data - Book, and Specialix document number 6200059: IO8+ Hardware - Functional Specification, augmented by document number 6200088: - Merak Hardware Functional Specification. (IO8+/PCI is also - called Merak) - - - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - USA. - - -Intro -===== - - -This file contains some random information, that I like to have online -instead of in a manual that can get lost. Ever misplace your Linux -kernel sources? And the manual of one of the boards in your computer? - - -Addresses and interrupts -======================== - -Address dip switch settings: -The dip switch sets bits 2-9 of the IO address. - - 9 8 7 6 5 4 3 2 - +-----------------+ - 0 | X X X X X X X | - | | = IoBase = 0x100 - 1 | X | - +-----------------+ ------ RS232 connectors ----> - - | | | - edge connector - | | | - V V V - -Base address 0x100 caused a conflict in one of my computers once. I -haven't the foggiest why. My Specialix card is now at 0x180. My -other computer runs just fine with the Specialix card at 0x100.... -The card occupies 4 addresses, but actually only two are really used. - -The PCI version doesn't have any dip switches. The BIOS assigns -an IO address. - -The driver now still autoprobes at 0x100, 0x180, 0x250 and 0x260. If -that causes trouble for you, please report that. I'll remove -autoprobing then. - -The driver will tell the card what IRQ to use, so you don't have to -change any jumpers to change the IRQ. Just use a command line -argument (irq=xx) to the insmod program to set the interrupt. - -The BIOS assigns the IRQ on the PCI version. You have no say in what -IRQ to use in that case. - -If your specialix cards are not at the default locations, you can use -the kernel command line argument "specialix=io0,irq0,io1,irq1...". -Here "io0" is the io address for the first card, and "irq0" is the -irq line that the first card should use. And so on. - -Examples. - -You use the driver as a module and have three cards at 0x100, 0x250 -and 0x180. And some way or another you want them detected in that -order. Moreover irq 12 is taken (e.g. by your PS/2 mouse). - - insmod specialix.o iobase=0x100,0x250,0x180 irq=9,11,15 - -The same three cards, but now in the kernel would require you to -add - - specialix=0x100,9,0x250,11,0x180,15 - -to the command line. This would become - - append="specialix=0x100,9,0x250,11,0x180,15" - -in your /etc/lilo.conf file if you use lilo. - -The Specialix driver is slightly odd: It allows you to have the second -or third card detected without having a first card. This has -advantages and disadvantages. A slot that isn't filled by an ISA card, -might be filled if a PCI card is detected. Thus if you have an ISA -card at 0x250 and a PCI card, you would get: - -sx0: specialix IO8+ Board at 0x100 not found. -sx1: specialix IO8+ Board at 0x180 not found. -sx2: specialix IO8+ board detected at 0x250, IRQ 12, CD1865 Rev. B. -sx3: specialix IO8+ Board at 0x260 not found. -sx0: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. - -This would happen if you don't give any probe hints to the driver. -If you would specify: - - specialix=0x250,11 - -you'd get the following messages: - -sx0: specialix IO8+ board detected at 0x250, IRQ 11, CD1865 Rev. B. -sx1: specialix IO8+ board detected at 0xd800, IRQ 9, CD1865 Rev. B. - -ISA probing is aborted after the IO address you gave is exhausted, and -the PCI card is now detected as the second card. The ISA card is now -also forced to IRQ11.... - - -Baud rates -========== - -The rev 1.2 and below boards use a CL-CD1864. These chips can only -do 64kbit. The rev 1.3 and newer boards use a CL-CD1865. These chips -are officially capable of 115k2. - -The Specialix card uses a 25MHz crystal (in times two mode, which in -fact is a divided by two mode). This is not enough to reach the rated -115k2 on all ports at the same time. With this clock rate you can only -do 37% of this rate. This means that at 115k2 on all ports you are -going to lose characters (The chip cannot handle that many incoming -bits at this clock rate.) (Yes, you read that correctly: there is a -limit to the number of -=bits=- per second that the chip can handle.) - -If you near the "limit" you will first start to see a graceful -degradation in that the chip cannot keep the transmitter busy at all -times. However with a central clock this slow, you can also get it to -miss incoming characters. The driver will print a warning message when -you are outside the official specs. The messages usually show up in -the file /var/log/messages . - -The specialix card cannot reliably do 115k2. If you use it, you have -to do "extensive testing" (*) to verify if it actually works. - -When "mgetty" communicates with my modem at 115k2 it reports: -got: +++[0d]ATQ0V1H0[0d][0d][8a]O[cb][0d][8a] - ^^^^ ^^^^ ^^^^ - -The three characters that have the "^^^" under them have suffered a -bit error in the highest bit. In conclusion: I've tested it, and found -that it simply DOESN'T work for me. I also suspect that this is also -caused by the baud rate being just a little bit out of tune. - -I upgraded the crystal to 66Mhz on one of my Specialix cards. Works -great! Contact me for details. (Voids warranty, requires a steady hand -and more such restrictions....) - - -(*) Cirrus logic CD1864 databook, page 40. - - -Cables for the Specialix IO8+ -============================= - -The pinout of the connectors on the IO8+ is: - - pin short direction long name - name - Pin 1 DCD input Data Carrier Detect - Pin 2 RXD input Receive - Pin 3 DTR/RTS output Data Terminal Ready/Ready To Send - Pin 4 GND - Ground - Pin 5 TXD output Transmit - Pin 6 CTS input Clear To Send - - - -- 6 5 4 3 2 1 -- - | | - | | - | | - | | - +----- -----+ - |__________| - clip - - Front view of an RJ12 connector. Cable moves "into" the paper. - (the plug is ready to plug into your mouth this way...) - - - NULL cable. I don't know who is going to use these except for - testing purposes, but I tested the cards with this cable. (It - took quite a while to figure out, so I'm not going to delete - it. So there! :-) - - - This end goes This end needs - straight into the some twists in - RJ12 plug. the wiring. - IO8+ RJ12 IO8+ RJ12 - 1 DCD white - - - - 1 DCD - 2 RXD black 5 TXD - 3 DTR/RTS red 6 CTS - 4 GND green 4 GND - 5 TXD yellow 2 RXD - 6 CTS blue 3 DTR/RTS - - - Same NULL cable, but now sorted on the second column. - - 1 DCD white - - - - 1 DCD - 5 TXD yellow 2 RXD - 6 CTS blue 3 DTR/RTS - 4 GND green 4 GND - 2 RXD black 5 TXD - 3 DTR/RTS red 6 CTS - - - - This is a modem cable usable for hardware handshaking: - RJ12 DB25 DB9 - 1 DCD white 8 DCD 1 DCD - 2 RXD black 3 RXD 2 RXD - 3 DTR/RTS red 4 RTS 7 RTS - 4 GND green 7 GND 5 GND - 5 TXD yellow 2 TXD 3 TXD - 6 CTS blue 5 CTS 8 CTS - +---- 6 DSR 6 DSR - +---- 20 DTR 4 DTR - - This is a modem cable usable for software handshaking: - It allows you to reset the modem using the DTR ioctls. - I (REW) have never tested this, "but xxxxxxxxxxxxx - says that it works." If you test this, please - tell me and I'll fill in your name on the xxx's. - - RJ12 DB25 DB9 - 1 DCD white 8 DCD 1 DCD - 2 RXD black 3 RXD 2 RXD - 3 DTR/RTS red 20 DTR 4 DTR - 4 GND green 7 GND 5 GND - 5 TXD yellow 2 TXD 3 TXD - 6 CTS blue 5 CTS 8 CTS - +---- 6 DSR 6 DSR - +---- 4 RTS 7 RTS - - I bought a 6 wire flat cable. It was colored as indicated. - Check that yours is the same before you trust me on this. - - -Hardware handshaking issues. -============================ - -The driver can be told to operate in two different ways. The default -behaviour is specialix.sx_rtscts = 0 where the pin behaves as DTR when -hardware handshaking is off. It behaves as the RTS hardware -handshaking signal when hardware handshaking is selected. - -When you use this, you have to use the appropriate cable. The -cable will either be compatible with hardware handshaking or with -software handshaking. So switching on the fly is not really an -option. - -I actually prefer to use the "specialix.sx_rtscts=1" option. -This makes the DTR/RTS pin always an RTS pin, and ioctls to -change DTR are always ignored. I have a cable that is configured -for this. - - -Ports and devices -================= - -Port 0 is the one furthest from the card-edge connector. - -Devices: - -You should make the devices as follows: - -bash -cd /dev -for i in 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 \ - 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 -do - echo -n "$i " - mknod /dev/ttyW$i c 75 $i - mknod /dev/cuw$i c 76 $i -done -echo "" - -If your system doesn't come with these devices preinstalled, bug your -linux-vendor about this. They have had ample time to get this -implemented by now. - -You cannot have more than 4 boards in one computer. The card only -supports 4 different interrupts. If you really want this, contact me -about this and I'll give you a few tips (requires soldering iron).... - -If you have enough PCI slots, you can probably use more than 4 PCI -versions of the card though.... - -The PCI version of the card cannot adhere to the mechanical part of -the PCI spec because the 8 serial connectors are simply too large. If -it doesn't fit in your computer, bring back the card. - - ------------------------------------------------------------------------- - - - Fixed bugs and restrictions: - - During initialization, interrupts are blindly turned on. - Having a shadow variable would cause an extra memory - access on every IO instruction. - - The interrupt (on the card) should be disabled when we - don't allocate the Linux end of the interrupt. This allows - a different driver/card to use it while all ports are not in - use..... (a la standard serial port) - == An extra _off variant of the sx_in and sx_out macros are - now available. They don't set the interrupt enable bit. - These are used during initialization. Normal operation uses - the old variant which enables the interrupt line. - - RTS/DTR issue needs to be implemented according to - specialix' spec. - I kind of like the "determinism" of the current - implementation. Compile time flag? - == Ok. Compile time flag! Default is how Specialix likes it. - == Now a config time flag! Gets saved in your config file. Neat! - - Can you set the IO address from the lilo command line? - If you need this, bug me about it, I'll make it. - == Hah! No bugging needed. Fixed! :-) - - Cirrus logic hasn't gotten back to me yet why the CD1865 can - and the CD1864 can't do 115k2. I suspect that this is - because the CD1864 is not rated for 33MHz operation. - Therefore the CD1864 versions of the card can't do 115k2 on - all ports just like the CD1865 versions. The driver does - not block 115k2 on CD1864 cards. - == I called the Cirrus Logic representative here in Holland. - The CD1864 databook is identical to the CD1865 databook, - except for an extra warning at the end. Similar Bit errors - have been observed in testing at 115k2 on both an 1865 and - a 1864 chip. I see no reason why I would prohibit 115k2 on - 1864 chips and not do it on 1865 chips. Actually there is - reason to prohibit it on BOTH chips. I print a warning. - If you use 115k2, you're on your own. - - A spiky CD may send spurious HUPs. Also in CLOCAL??? - -- A fix for this turned out to be counter productive. - Different fix? Current behaviour is acceptable? - -- Maybe the current implementation is correct. If anybody - gets bitten by this, please report, and it will get fixed. - - -- Testing revealed that when in CLOCAL, the problem doesn't - occur. As warned for in the CD1865 manual, the chip may - send modem intr's on a spike. We could filter those out, - but that would be a cludge anyway (You'd still risk getting - a spurious HUP when two spikes occur.)..... - - - - Bugs & restrictions: - - This is a difficult card to autoprobe. - You have to WRITE to the address register to even - read-probe a CD186x register. Disable autodetection? - -- Specialix: any suggestions? - - diff --git a/Documentation/serial/sx.txt b/Documentation/serial/sx.txt deleted file mode 100644 index cb4efa0..0000000 --- a/Documentation/serial/sx.txt +++ /dev/null @@ -1,294 +0,0 @@ - - sx.txt -- specialix SX/SI multiport serial driver readme. - - - - Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl) - - Specialix pays for the development and support of this driver. - Please DO contact support@specialix.co.uk if you require - support. - - This driver was developed in the BitWizard linux device - driver service. If you require a linux device driver for your - product, please contact devices@BitWizard.nl for a quote. - - (History) - There used to be an SI driver by Simon Allan. This is a complete - rewrite from scratch. Just a few lines-of-code have been snatched. - - (Sources) - Specialix document number 6210028: SX Host Card and Download Code - Software Functional Specification. - - (Copying) - This program is free software; you can redistribute it and/or - modify it under the terms of the GNU General Public License as - published by the Free Software Foundation; either version 2 of - the License, or (at your option) any later version. - - This program is distributed in the hope that it will be - useful, but WITHOUT ANY WARRANTY; without even the implied - warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public - License along with this program; if not, write to the Free - Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, - USA. - - (Addendum) - I'd appreciate it that if you have fixes, that you send them - to me first. - - -Introduction -============ - -This file contains some random information, that I like to have online -instead of in a manual that can get lost. Ever misplace your Linux -kernel sources? And the manual of one of the boards in your computer? - - -Theory of operation -=================== - -An important thing to know is that the driver itself doesn't have the -firmware for the card. This means that you need the separate package -"sx_firmware". For now you can get the source at - - ftp://ftp.bitwizard.nl/specialix/sx_firmware_<version>.tgz - -The firmware load needs a "misc" device, so you'll need to enable the -"Support for user misc device modules" in your kernel configuration. -The misc device needs to be called "/dev/specialix_sxctl". It needs -misc major 10, and minor number 167 (assigned by HPA). The section -on creating device files below also creates this device. - -After loading the sx.o module into your kernel, the driver will report -the number of cards detected, but because it doesn't have any -firmware, it will not be able to determine the number of ports. Only -when you then run "sx_firmware" will the firmware be downloaded and -the rest of the driver initialized. At that time the sx_firmware -program will report the number of ports installed. - -In contrast with many other multi port serial cards, some of the data -structures are only allocated when the card knows the number of ports -that are connected. This means we won't waste memory for 120 port -descriptor structures when you only have 8 ports. If you experience -problems due to this, please report them: I haven't seen any. - - -Interrupts -========== - -A multi port serial card, would generate a horrendous amount of -interrupts if it would interrupt the CPU for every received -character. Even more than 10 years ago, the trick not to use -interrupts but to poll the serial cards was invented. - -The SX card allow us to do this two ways. First the card limits its -own interrupt rate to a rate that won't overwhelm the CPU. Secondly, -we could forget about the cards interrupt completely and use the -internal timer for this purpose. - -Polling the card can take up to a few percent of your CPU. Using the -interrupts would be better if you have most of the ports idle. Using -timer-based polling is better if your card almost always has work to -do. You save the separate interrupt in that case. - -In any case, it doesn't really matter all that much. - -The most common problem with interrupts is that for ISA cards in a PCI -system the BIOS has to be told to configure that interrupt as "legacy -ISA". Otherwise the card can pull on the interrupt line all it wants -but the CPU won't see this. - -If you can't get the interrupt to work, remember that polling mode is -more efficient (provided you actually use the card intensively). - - -Allowed Configurations -====================== - -Some configurations are disallowed. Even though at a glance they might -seem to work, they are known to lockup the bus between the host card -and the device concentrators. You should respect the drivers decision -not to support certain configurations. It's there for a reason. - -Warning: Seriously technical stuff ahead. Executive summary: Don't use -SX cards except configured at a 64k boundary. Skip the next paragraph. - -The SX cards can theoretically be placed at a 32k boundary. So for -instance you can put an SX card at 0xc8000-0xd7fff. This is not a -"recommended configuration". ISA cards have to tell the bus controller -how they like their timing. Due to timing issues they have to do this -based on which 64k window the address falls into. This means that the -32k window below and above the SX card have to use exactly the same -timing as the SX card. That reportedly works for other SX cards. But -you're still left with two useless 32k windows that should not be used -by anybody else. - - -Configuring the driver -====================== - -PCI cards are always detected. The driver auto-probes for ISA cards at -some sensible addresses. Please report if the auto-probe causes trouble -in your system, or when a card isn't detected. - -I'm afraid I haven't implemented "kernel command line parameters" yet. -This means that if the default doesn't work for you, you shouldn't use -the compiled-into-the-kernel version of the driver. Use a module -instead. If you convince me that you need this, I'll make it for -you. Deal? - -I'm afraid that the module parameters are a bit clumsy. If you have a -better idea, please tell me. - -You can specify several parameters: - - sx_poll: number of jiffies between timer-based polls. - - Set this to "0" to disable timer based polls. - Initialization of cards without a working interrupt - will fail. - - Set this to "1" if you want a polling driver. - (on Intel: 100 polls per second). If you don't use - fast baud rates, you might consider a value like "5". - (If you don't know how to do the math, use 1). - - sx_slowpoll: Number of jiffies between timer-based polls. - Set this to "100" to poll once a second. - This should get the card out of a stall if the driver - ever misses an interrupt. I've never seen this happen, - and if it does, that's a bug. Tell me. - - sx_maxints: Number of interrupts to request from the card. - The card normally limits interrupts to about 100 per - second to offload the host CPU. You can increase this - number to reduce latency on the card a little. - Note that if you give a very high number you can overload - your CPU as well as the CPU on the host card. This setting - is inaccurate and not recommended for SI cards (But it - works). - - sx_irqmask: The mask of allowable IRQs to use. I suggest you set - this to 0 (disable IRQs all together) and use polling if - the assignment of IRQs becomes problematic. This is defined - as the sum of (1 << irq) 's that you want to allow. So - sx_irqmask of 8 (1 << 3) specifies that only irq 3 may - be used by the SX driver. If you want to specify to the - driver: "Either irq 11 or 12 is ok for you to use", then - specify (1 << 11) | (1 << 12) = 0x1800 . - - sx_debug: You can enable different sorts of debug traces with this. - At "-1" all debugging traces are active. You'll get several - times more debugging output than you'll get characters - transmitted. - - -Baud rates -========== - -Theoretically new SXDCs should be capable of more than 460k -baud. However the line drivers usually give up before that. Also the -CPU on the card may not be able to handle 8 channels going at full -blast at that speed. Moreover, the buffers are not large enough to -allow operation with 100 interrupts per second. You'll have to realize -that the card has a 256 byte buffer, so you'll have to increase the -number of interrupts per second if you have more than 256*100 bytes -per second to transmit. If you do any performance testing in this -area, I'd be glad to hear from you... - -(Psst Linux users..... I think the Linux driver is more efficient than -the driver for other OSes. If you can and want to benchmark them -against each other, be my guest, and report your findings...... :-) - - -Ports and devices -================= - -Port 0 is the top connector on the module closest to the host -card. Oh, the ports on the SXDCs and TAs are labelled from 1 to 8 -instead of from 0 to 7, as they are numbered by linux. I'm stubborn in -this: I know for sure that I wouldn't be able to calculate which port -is which anymore if I would change that.... - - -Devices: - -You should make the device files as follows: - -#!/bin/sh -# (I recommend that you cut-and-paste this into a file and run that) -cd /dev -t=0 -mknod specialix_sxctl c 10 167 -while [ $t -lt 64 ] - do - echo -n "$t " - mknod ttyX$t c 32 $t - mknod cux$t c 33 $t - t=`expr $t + 1` -done -echo "" -rm /etc/psdevtab -ps > /dev/null - - -This creates 64 devices. If you have more, increase the constant on -the line with "while". The devices start at 0, as is customary on -Linux. Specialix seems to like starting the numbering at 1. - -If your system doesn't come with these devices pre-installed, bug your -linux-vendor about this. They should have these devices -"pre-installed" before the new millennium. The "ps" stuff at the end -is to "tell" ps that the new devices exist. - -Officially the maximum number of cards per computer is 4. This driver -however supports as many cards in one machine as you want. You'll run -out of interrupts after a few, but you can switch to polled operation -then. At about 256 ports (More than 8 cards), we run out of minor -device numbers. Sorry. I suggest you buy a second computer.... (Or -switch to RIO). - ------------------------------------------------------------------------- - - - Fixed bugs and restrictions: - - Hangup processing. - -- Done. - - - the write path in generic_serial (lockup / oops). - -- Done (Ugly: not the way I want it. Copied from serial.c). - - - write buffer isn't flushed at close. - -- Done. I still seem to lose a few chars at close. - Sorry. I think that this is a firmware issue. (-> Specialix) - - - drain hardware before changing termios - - Change debug on the fly. - - ISA free irq -1. (no firmware loaded). - - adding c8000 as a probe address. Added warning. - - Add a RAMtest for the RAM on the card.c - - Crash when opening a port "way" of the number of allowed ports. - (for example opening port 60 when there are only 24 ports attached) - - Sometimes the use-count strays a bit. After a few hours of - testing the use count is sometimes "3". If you are not like - me and can remember what you did to get it that way, I'd - appreciate an Email. Possibly fixed. Tell me if anyone still - sees this. - - TAs don't work right if you don't connect all the modem control - signals. SXDCs do. T225 firmware problem -> Specialix. - (Mostly fixed now, I think. Tell me if you encounter this!) - - Bugs & restrictions: - - - Arbitrary baud rates. Requires firmware update. (-> Specialix) - - - Low latency (mostly firmware, -> Specialix) - - - diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index b0714d8..cbc2f03 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -39,7 +39,7 @@ Procedure for submitting patches to the -stable tree: the stable tree without anything else needing to be done by the author or subsystem maintainer. - If the patch requires other patches as prerequisites which can be - cherry-picked than this can be specified in the following format in + cherry-picked, then this can be specified in the following format in the sign-off area: Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle diff --git a/Documentation/vm/numa_memory_policy.txt b/Documentation/vm/numa_memory_policy.txt index 4e7da65..badb050 100644 --- a/Documentation/vm/numa_memory_policy.txt +++ b/Documentation/vm/numa_memory_policy.txt @@ -174,7 +174,6 @@ Components of Memory Policies allocation fails, the kernel will search other nodes, in order of increasing distance from the preferred node based on information provided by the platform firmware. - containing the cpu where the allocation takes place. Internally, the Preferred policy uses a single node--the preferred_node member of struct mempolicy. When the internal @@ -275,9 +274,9 @@ Components of Memory Policies For example, consider a task that is attached to a cpuset with mems 2-5 that sets an Interleave policy over the same set with MPOL_F_RELATIVE_NODES. If the cpuset's mems change to 3-7, the - interleave now occurs over nodes 3,5-6. If the cpuset's mems + interleave now occurs over nodes 3,5-7. If the cpuset's mems then change to 0,2-3,5, then the interleave occurs over nodes - 0,3,5. + 0,2-3,5. Thanks to the consistent remapping, applications preparing nodemasks to specify memory policies using this flag should diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO index 6c914aa..54ea24f 100644 --- a/Documentation/zh_CN/HOWTO +++ b/Documentation/zh_CN/HOWTO @@ -237,7 +237,7 @@ kernel.org网站的pub/linux/kernel/v2.6/目录下找到它。它的开发遵循 如果没有2.6.x.y版本内核存在，那么最新的2.6.x版本内核就相当于是当前的稳定 版内核。 -2.6.x.y版本由“稳定版”小组（邮件地址<stable@kernel.org>）维护，一般隔周发 +2.6.x.y版本由“稳定版”小组（邮件地址<stable@vger.kernel.org>）维护，一般隔周发 布新版本。 内核源码中的Documentation/stable_kernel_rules.txt文件具体描述了可被稳定 diff --git a/Documentation/zh_CN/io_ordering.txt b/Documentation/zh_CN/io_ordering.txt new file mode 100644 index 0000000..e592daf --- /dev/null +++ b/Documentation/zh_CN/io_ordering.txt @@ -0,0 +1,67 @@ +Chinese translated version of Documentation/io_orderings.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Chinese maintainer: Lin Yongting <linyongting@gmail.com> +--------------------------------------------------------------------- +Documentation/io_ordering.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 + +中文版维护者： 林永听 Lin Yongting <linyongting@gmail.com> +中文版翻译者： 林永听 Lin Yongting <linyongting@gmail.com> +中文版校译者： 林永听 Lin Yongting <linyongting@gmail.com> + + +以下为正文 +--------------------------------------------------------------------- + +在某些平台上，所谓的内存映射I/O是弱顺序。在这些平台上，驱动开发者有责任 +保证I/O内存映射地址的写操作按程序图意的顺序达到设备。通常读取一个“安全” +设备寄存器或桥寄存器，触发IO芯片清刷未处理的写操作到达设备后才处理读操作， +而达到保证目的。驱动程序通常在spinlock保护的临界区退出之前使用这种技术。 +这也可以保证后面的写操作只在前面的写操作之后到达设备（这非常类似于内存 +屏障操作，mb()，不过仅适用于I/O）。 + +假设一个设备驱动程的具体例子： + + ... +CPU A: spin_lock_irqsave(&dev_lock, flags) +CPU A: val = readl(my_status); +CPU A: ... +CPU A: writel(newval, ring_ptr); +CPU A: spin_unlock_irqrestore(&dev_lock, flags) + ... +CPU B: spin_lock_irqsave(&dev_lock, flags) +CPU B: val = readl(my_status); +CPU B: ... +CPU B: writel(newval2, ring_ptr); +CPU B: spin_unlock_irqrestore(&dev_lock, flags) + ... + +上述例子中，设备可能会先接收到newval2的值，然后接收到newval的值，问题就 +发生了。不过很容易通过下面方法来修复： + + ... +CPU A: spin_lock_irqsave(&dev_lock, flags) +CPU A: val = readl(my_status); +CPU A: ... +CPU A: writel(newval, ring_ptr); +CPU A: (void)readl(safe_register); /* 配置寄存器？*/ +CPU A: spin_unlock_irqrestore(&dev_lock, flags) + ... +CPU B: spin_lock_irqsave(&dev_lock, flags) +CPU B: val = readl(my_status); +CPU B: ... +CPU B: writel(newval2, ring_ptr); +CPU B: (void)readl(safe_register); /* 配置寄存器？*/ +CPU B: spin_unlock_irqrestore(&dev_lock, flags) + +在解决方案中，读取safe_register寄存器，触发IO芯片清刷未处理的写操作， +再处理后面的读操作，防止引发数据不一致问题。 diff --git a/Documentation/zh_CN/magic-number.txt b/Documentation/zh_CN/magic-number.txt index 2ebe539..dfb72a5 100644 --- a/Documentation/zh_CN/magic-number.txt +++ b/Documentation/zh_CN/magic-number.txt @@ -63,8 +63,6 @@ struct tty_ldisc { PG_MAGIC 'P' pg_{read,write}_hdr include/linux/pg.h CMAGIC 0x0111 user include/linux/a.out.h MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h -RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h -SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm_32.c CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h @@ -82,7 +80,6 @@ STRIP_MAGIC 0x5303 strip drivers/net/strip.c X25_ASY_MAGIC 0x5303 x25_asy drivers/net/x25_asy.h SIXPACK_MAGIC 0x5304 sixpack drivers/net/hamradio/6pack.h AX25_MAGIC 0x5316 ax_disp drivers/net/mkiss.h -ESP_MAGIC 0x53ee esp_struct drivers/char/esp.h TTY_MAGIC 0x5401 tty_struct include/linux/tty.h MGSL_MAGIC 0x5401 mgsl_info drivers/char/synclink.c TTY_DRIVER_MAGIC 0x5402 tty_driver include/linux/tty_driver.h @@ -94,13 +91,10 @@ USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth drivers/usb/class/bluetty.c RFCOMM_TTY_MAGIC 0x6d02 net/bluetooth/rfcomm/tty.c USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port drivers/usb/serial/usb-serial.h CG_MAGIC 0x00090255 ufs_cylinder_group include/linux/ufs_fs.h -A2232_MAGIC 0x000a2232 gs_port drivers/char/ser_a2232.h RPORT_MAGIC 0x00525001 r_port drivers/char/rocket_int.h LSEMAGIC 0x05091998 lse drivers/fc4/fc.c GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str drivers/scsi/gdth_ioctl.h RIEBL_MAGIC 0x09051990 drivers/net/atarilance.c -RIO_MAGIC 0x12345678 gs_port drivers/char/rio/rio_linux.c -SX_MAGIC 0x12345678 gs_port drivers/char/sx.h NBD_REQUEST_MAGIC 0x12560953 nbd_request include/linux/nbd.h RED_MAGIC2 0x170fc2a5 (any) mm/slab.c BAYCOM_MAGIC 0x19730510 baycom_state drivers/net/baycom_epp.c @@ -116,7 +110,6 @@ ISDN_ASYNC_MAGIC 0x49344C01 modem_info include/linux/isdn.h CTC_ASYNC_MAGIC 0x49344C01 ctc_tty_info drivers/s390/net/ctctty.c ISDN_NET_MAGIC 0x49344C02 isdn_net_local_s drivers/isdn/i4l/isdn_net_lib.h SAVEKMSG_MAGIC2 0x4B4D5347 savekmsg arch/*/amiga/config.c -STLI_BOARDMAGIC 0x4bc6c825 stlibrd include/linux/istallion.h CS_STATE_MAGIC 0x4c4f4749 cs_state sound/oss/cs46xx.c SLAB_C_MAGIC 0x4f17a36d kmem_cache mm/slab.c COW_MAGIC 0x4f4f4f4d cow_header_v1 arch/um/drivers/ubd_user.c @@ -127,10 +120,8 @@ SCC_MAGIC 0x52696368 gs_port drivers/char/scc.h SAVEKMSG_MAGIC1 0x53415645 savekmsg arch/*/amiga/config.c GDA_MAGIC 0x58464552 gda arch/mips/include/asm/sn/gda.h RED_MAGIC1 0x5a2cf071 (any) mm/slab.c -STL_PORTMAGIC 0x5a7182c9 stlport include/linux/stallion.h EEPROM_MAGIC_VALUE 0x5ab478d2 lanai_dev drivers/atm/lanai.c HDLCDRV_MAGIC 0x5ac6e778 hdlcdrv_state include/linux/hdlcdrv.h -EPCA_MAGIC 0x5c6df104 channel include/linux/epca.h PCXX_MAGIC 0x5c6df104 channel drivers/char/pcxx.h KV_MAGIC 0x5f4b565f kernel_vars_s arch/mips/include/asm/sn/klkernvars.h I810_STATE_MAGIC 0x63657373 i810_state sound/oss/i810_audio.c @@ -142,17 +133,14 @@ SLOT_MAGIC 0x67267322 slot drivers/hotplug/acpiphp.h LO_MAGIC 0x68797548 nbd_device include/linux/nbd.h OPROFILE_MAGIC 0x6f70726f super_block drivers/oprofile/oprofilefs.h M3_STATE_MAGIC 0x734d724d m3_state sound/oss/maestro3.c -STL_PANELMAGIC 0x7ef621a1 stlpanel include/linux/stallion.h VMALLOC_MAGIC 0x87654320 snd_alloc_track sound/core/memory.c KMALLOC_MAGIC 0x87654321 snd_alloc_track sound/core/memory.c PWC_MAGIC 0x89DC10AB pwc_device drivers/usb/media/pwc.h NBD_REPLY_MAGIC 0x96744668 nbd_reply include/linux/nbd.h -STL_BOARDMAGIC 0xa2267f52 stlbrd include/linux/stallion.h ENI155_MAGIC 0xa54b872d midway_eprom drivers/atm/eni.h SCI_MAGIC 0xbabeface gs_port drivers/char/sh-sci.h CODA_MAGIC 0xC0DAC0DA coda_file_info include/linux/coda_fs_i.h DPMEM_MAGIC 0xc0ffee11 gdt_pci_sram drivers/scsi/gdth.h -STLI_PORTMAGIC 0xe671c7a1 stliport include/linux/istallion.h YAM_MAGIC 0xF10A7654 yam_port drivers/net/hamradio/yam.c CCB_MAGIC 0xf2691ad2 ccb drivers/scsi/ncr53c8xx.c QUEUE_MAGIC_FREE 0xf7e1c9a3 queue_entry drivers/scsi/arm/queue.c diff --git a/Documentation/zh_CN/stable_kernel_rules.txt b/Documentation/zh_CN/stable_kernel_rules.txt index b5b9b0a..26ea5ed 100644 --- a/Documentation/zh_CN/stable_kernel_rules.txt +++ b/Documentation/zh_CN/stable_kernel_rules.txt @@ -42,7 +42,7 @@ Documentation/stable_kernel_rules.txt 的中文翻译 向稳定版代码树提交补丁的过程： - - 在确认了补丁符合以上的规则后，将补丁发送到stable@kernel.org。 + - 在确认了补丁符合以上的规则后，将补丁发送到stable@vger.kernel.org。 - 如果补丁被接受到队列里，发送者会收到一个ACK回复，如果没有被接受，收 到的是NAK回复。回复需要几天的时间，这取决于开发者的时间安排。 - 被接受的补丁会被加到稳定版本队列里，等待其他开发者的审查。 |
