2 files changed, 64 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
new file mode 100644
index 0000000..e2c663b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -0,0 +1,33 @@
+* FSMC NAND
+
+Required properties:
+- compatible : "st,spear600-fsmc-nand"
+- reg : Address range of the mtd chip
+- reg-names: Should contain the reg names "fsmc_regs" and "nand_data"
+- st,ale-off : Chip specific offset to ALE
+- st,cle-off : Chip specific offset to CLE
+
+Optional properties:
+- bank-width : Width (in bytes) of the device.  If not present, the width
+  defaults to 1 byte
+- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+
+Example:
+
+	fsmc: flash@d1800000 {
+		compatible = "st,spear600-fsmc-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xd1800000 0x1000	/* FSMC Register */
+		       0xd2000000 0x4000>;	/* NAND Base */
+		reg-names = "fsmc_regs", "nand_data";
+		st,ale-off = <0x20000>;
+		st,cle-off = <0x10000>;
+
+		bank-width = <1>;
+		nand-skip-bbtscan;
+
+		partition@0 {
+			...
+		};
+	};
diff --git a/Documentation/devicetree/bindings/mtd/spear_smi.txt b/Documentation/devicetree/bindings/mtd/spear_smi.txt
new file mode 100644
index 0000000..7248aad
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/spear_smi.txt
@@ -0,0 +1,31 @@
+* SPEAr SMI
+
+Required properties:
+- compatible : "st,spear600-smi"
+- reg : Address range of the mtd chip
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+  representing partitions.
+- interrupt-parent: Should be the phandle for the interrupt controller
+  that services interrupts for this device
+- interrupts: Should contain the STMMAC interrupts
+- clock-rate : Functional clock rate of SMI in Hz
+
+Optional properties:
+- st,smi-fast-mode : Flash supports read in fast mode
+
+Example:
+
+	smi: flash@fc000000 {
+		compatible = "st,spear600-smi";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xfc000000 0x1000>;
+		interrupt-parent = <&vic1>;
+		interrupts = <12>;
+		clock-rate = <50000000>;	/* 50MHz */
+
+		flash@f8000000 {
+			st,smi-fast-mode;
+			...
+		};
+	};