diff options
Diffstat (limited to 'Documentation')
34 files changed, 746 insertions, 140 deletions
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram new file mode 100644 index 0000000..c8b3b48 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -0,0 +1,99 @@ +What: /sys/block/zram<id>/disksize +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The disksize file is read-write and specifies the disk size + which represents the limit on the *uncompressed* worth of data + that can be stored in this disk. + +What: /sys/block/zram<id>/initstate +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The disksize file is read-only and shows the initialization + state of the device. + +What: /sys/block/zram<id>/reset +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The disksize file is write-only and allows resetting the + device. The reset operation frees all the memory assocaited + with this device. + +What: /sys/block/zram<id>/num_reads +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The num_reads file is read-only and specifies the number of + reads (failed or successful) done on this device. + +What: /sys/block/zram<id>/num_writes +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The num_writes file is read-only and specifies the number of + writes (failed or successful) done on this device. + +What: /sys/block/zram<id>/invalid_io +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The invalid_io file is read-only and specifies the number of + non-page-size-aligned I/O requests issued to this device. + +What: /sys/block/zram<id>/notify_free +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The notify_free file is read-only and specifies the number of + swap slot free notifications received by this device. These + notifications are send to a swap block device when a swap slot + is freed. This statistic is applicable only when this disk is + being used as a swap disk. + +What: /sys/block/zram<id>/discard +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The discard file is read-only and specifies the number of + discard requests received by this device. These requests + provide information to block device regarding blocks which are + no longer used by filesystem. + +What: /sys/block/zram<id>/zero_pages +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The zero_pages file is read-only and specifies number of zero + filled pages written to this disk. No memory is allocated for + such pages. + +What: /sys/block/zram<id>/orig_data_size +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The orig_data_size file is read-only and specifies uncompressed + size of data stored in this disk. This excludes zero-filled + pages (zero_pages) since no memory is allocated for them. + Unit: bytes + +What: /sys/block/zram<id>/compr_data_size +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The compr_data_size file is read-only and specifies compressed + size of data stored in this disk. So, compression ratio can be + calculated using orig_data_size and this statistic. + Unit: bytes + +What: /sys/block/zram<id>/mem_used_total +Date: August 2010 +Contact: Nitin Gupta <ngupta@vflare.org> +Description: + The mem_used_total file is read-only and specifies the amount + of memory, including allocator fragmentation and metadata + overhead, allocated for this disk. So, allocator space + efficiency can be calculated using compr_data_size and this + statistic. + Unit: bytes
\ No newline at end of file diff --git a/Documentation/DocBook/media-entities.tmpl b/Documentation/DocBook/media-entities.tmpl index 6ae9715..be34dcb 100644 --- a/Documentation/DocBook/media-entities.tmpl +++ b/Documentation/DocBook/media-entities.tmpl @@ -250,6 +250,9 @@ <!ENTITY sub-yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml"> <!ENTITY sub-yuyv SYSTEM "v4l/pixfmt-yuyv.xml"> <!ENTITY sub-yvyu SYSTEM "v4l/pixfmt-yvyu.xml"> +<!ENTITY sub-srggb10 SYSTEM "v4l/pixfmt-srggb10.xml"> +<!ENTITY sub-srggb8 SYSTEM "v4l/pixfmt-srggb8.xml"> +<!ENTITY sub-y10 SYSTEM "v4l/pixfmt-y10.xml"> <!ENTITY sub-pixfmt SYSTEM "v4l/pixfmt.xml"> <!ENTITY sub-cropcap SYSTEM "v4l/vidioc-cropcap.xml"> <!ENTITY sub-dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml"> @@ -347,6 +350,9 @@ <!ENTITY yuv422p SYSTEM "v4l/pixfmt-yuv422p.xml"> <!ENTITY yuyv SYSTEM "v4l/pixfmt-yuyv.xml"> <!ENTITY yvyu SYSTEM "v4l/pixfmt-yvyu.xml"> +<!ENTITY srggb10 SYSTEM "v4l/pixfmt-srggb10.xml"> +<!ENTITY srggb8 SYSTEM "v4l/pixfmt-srggb8.xml"> +<!ENTITY y10 SYSTEM "v4l/pixfmt-y10.xml"> <!ENTITY cropcap SYSTEM "v4l/vidioc-cropcap.xml"> <!ENTITY dbg-g-register SYSTEM "v4l/vidioc-dbg-g-register.xml"> <!ENTITY encoder-cmd SYSTEM "v4l/vidioc-encoder-cmd.xml"> diff --git a/Documentation/DocBook/v4l/compat.xml b/Documentation/DocBook/v4l/compat.xml index 54447f0..c9ce61d 100644 --- a/Documentation/DocBook/v4l/compat.xml +++ b/Documentation/DocBook/v4l/compat.xml @@ -21,11 +21,15 @@ API.</para> <title>Opening and Closing Devices</title> <para>For compatibility reasons the character device file names -recommended for V4L2 video capture, overlay, radio, teletext and raw +recommended for V4L2 video capture, overlay, radio and raw vbi capture devices did not change from those used by V4L. They are listed in <xref linkend="devices" /> and below in <xref linkend="v4l-dev" />.</para> + <para>The teletext devices (minor range 192-223) have been removed in +V4L2 and no longer exist. There is no hardware available anymore for handling +pure teletext. Instead raw or sliced VBI is used.</para> + <para>The V4L <filename>videodev</filename> module automatically assigns minor numbers to drivers in load order, depending on the registered device type. We recommend that V4L2 drivers by default @@ -66,13 +70,6 @@ not compatible with V4L or V4L2.</para> </footnote>, <entry>64-127</entry> </row> <row> - <entry>Teletext decoder</entry> - <entry><para><filename>/dev/vtx</filename>, -<filename>/dev/vtx0</filename> to -<filename>/dev/vtx31</filename></para></entry> - <entry>192-223</entry> - </row> - <row> <entry>Raw VBI capture</entry> <entry><para><filename>/dev/vbi</filename>, <filename>/dev/vbi0</filename> to @@ -2345,6 +2342,17 @@ more information.</para> </listitem> </orderedlist> </section> + <section> + <title>V4L2 in Linux 2.6.37</title> + <orderedlist> + <listitem> + <para>Remove the vtx (videotext/teletext) API. This API was no longer +used and no hardware exists to verify the API. Nor were any userspace applications found +that used it. It was originally scheduled for removal in 2.6.35. + </para> + </listitem> + </orderedlist> + </section> <section id="other"> <title>Relation of V4L2 to other Linux multimedia APIs</title> diff --git a/Documentation/DocBook/v4l/controls.xml b/Documentation/DocBook/v4l/controls.xml index 8408caa..2fae3e8 100644 --- a/Documentation/DocBook/v4l/controls.xml +++ b/Documentation/DocBook/v4l/controls.xml @@ -312,10 +312,17 @@ minimum value disables backlight compensation.</entry> information and bits 24-31 must be zero.</entry> </row> <row> + <entry><constant>V4L2_CID_ILLUMINATORS_1</constant> + <constant>V4L2_CID_ILLUMINATORS_2</constant></entry> + <entry>boolean</entry> + <entry>Switch on or off the illuminator 1 or 2 of the device + (usually a microscope).</entry> + </row> + <row> <entry><constant>V4L2_CID_LASTP1</constant></entry> <entry></entry> <entry>End of the predefined control IDs (currently -<constant>V4L2_CID_BG_COLOR</constant> + 1).</entry> +<constant>V4L2_CID_ILLUMINATORS_2</constant> + 1).</entry> </row> <row> <entry><constant>V4L2_CID_PRIVATE_BASE</constant></entry> @@ -357,9 +364,6 @@ enumerate_menu (void) querymenu.index++) { if (0 == ioctl (fd, &VIDIOC-QUERYMENU;, &querymenu)) { printf (" %s\n", querymenu.name); - } else { - perror ("VIDIOC_QUERYMENU"); - exit (EXIT_FAILURE); } } } diff --git a/Documentation/DocBook/v4l/dev-rds.xml b/Documentation/DocBook/v4l/dev-rds.xml index 0869d70..360d273 100644 --- a/Documentation/DocBook/v4l/dev-rds.xml +++ b/Documentation/DocBook/v4l/dev-rds.xml @@ -3,15 +3,16 @@ <para>The Radio Data System transmits supplementary information in binary format, for example the station name or travel information, on an inaudible audio subcarrier of a radio program. This -interface is aimed at devices capable of receiving and decoding RDS +interface is aimed at devices capable of receiving and/or transmitting RDS information.</para> <para>For more information see the core RDS standard <xref linkend="en50067" /> and the RBDS standard <xref linkend="nrsc4" />.</para> <para>Note that the RBDS standard as is used in the USA is almost identical -to the RDS standard. Any RDS decoder can also handle RBDS. Only some of the fields -have slightly different meanings. See the RBDS standard for more information.</para> +to the RDS standard. Any RDS decoder/encoder can also handle RBDS. Only some of the +fields have slightly different meanings. See the RBDS standard for more +information.</para> <para>The RBDS standard also specifies support for MMBS (Modified Mobile Search). This is a proprietary format which seems to be discontinued. The RDS interface does not @@ -21,16 +22,25 @@ be needed, then please contact the linux-media mailing list: &v4l-ml;.</para> <section> <title>Querying Capabilities</title> - <para>Devices supporting the RDS capturing API -set the <constant>V4L2_CAP_RDS_CAPTURE</constant> flag in + <para>Devices supporting the RDS capturing API set +the <constant>V4L2_CAP_RDS_CAPTURE</constant> flag in the <structfield>capabilities</structfield> field of &v4l2-capability; -returned by the &VIDIOC-QUERYCAP; ioctl. -Any tuner that supports RDS will set the -<constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield> -field of &v4l2-tuner;. -Whether an RDS signal is present can be detected by looking at -the <structfield>rxsubchans</structfield> field of &v4l2-tuner;: the -<constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data was detected.</para> +returned by the &VIDIOC-QUERYCAP; ioctl. Any tuner that supports RDS +will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in +the <structfield>capability</structfield> field of &v4l2-tuner;. If +the driver only passes RDS blocks without interpreting the data +the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be +set, see <link linkend="reading-rds-data">Reading RDS data</link>. +For future use the +flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> has also been +defined. However, a driver for a radio tuner with this capability does +not yet exist, so if you are planning to write such a driver you +should discuss this on the linux-media mailing list: &v4l-ml;.</para> + + <para> Whether an RDS signal is present can be detected by looking +at the <structfield>rxsubchans</structfield> field of &v4l2-tuner;: +the <constant>V4L2_TUNER_SUB_RDS</constant> will be set if RDS data +was detected.</para> <para>Devices supporting the RDS output API set the <constant>V4L2_CAP_RDS_OUTPUT</constant> flag in @@ -40,16 +50,31 @@ Any modulator that supports RDS will set the <constant>V4L2_TUNER_CAP_RDS</constant> flag in the <structfield>capability</structfield> field of &v4l2-modulator;. In order to enable the RDS transmission one must set the <constant>V4L2_TUNER_SUB_RDS</constant> -bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;.</para> - +bit in the <structfield>txsubchans</structfield> field of &v4l2-modulator;. +If the driver only passes RDS blocks without interpreting the data +the <constant>V4L2_TUNER_SUB_RDS_BLOCK_IO</constant> flag has to be set. If the +tuner is capable of handling RDS entities like program identification codes and radio +text, the flag <constant>V4L2_TUNER_SUB_RDS_CONTROLS</constant> should be set, +see <link linkend="writing-rds-data">Writing RDS data</link> and +<link linkend="fm-tx-controls">FM Transmitter Control Reference</link>.</para> </section> - <section> + <section id="reading-rds-data"> <title>Reading RDS data</title> <para>RDS data can be read from the radio device -with the &func-read; function. The data is packed in groups of three bytes, +with the &func-read; function. The data is packed in groups of three bytes.</para> + </section> + + <section id="writing-rds-data"> + <title>Writing RDS data</title> + + <para>RDS data can be written to the radio device +with the &func-write; function. The data is packed in groups of three bytes, as follows:</para> + </section> + + <section> <table frame="none" pgwide="1" id="v4l2-rds-data"> <title>struct <structname>v4l2_rds_data</structname></title> @@ -111,48 +136,57 @@ as follows:</para> <tbody valign="top"> <row> <entry>V4L2_RDS_BLOCK_MSK</entry> + <entry> </entry> <entry>7</entry> <entry>Mask for bits 0-2 to get the block ID.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_A</entry> + <entry> </entry> <entry>0</entry> <entry>Block A.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_B</entry> + <entry> </entry> <entry>1</entry> <entry>Block B.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_C</entry> + <entry> </entry> <entry>2</entry> <entry>Block C.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_D</entry> + <entry> </entry> <entry>3</entry> <entry>Block D.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_C_ALT</entry> + <entry> </entry> <entry>4</entry> <entry>Block C'.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_INVALID</entry> + <entry>read-only</entry> <entry>7</entry> <entry>An invalid block.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_CORRECTED</entry> + <entry>read-only</entry> <entry>0x40</entry> <entry>A bit error was detected but corrected.</entry> </row> <row> <entry>V4L2_RDS_BLOCK_ERROR</entry> + <entry>read-only</entry> <entry>0x80</entry> - <entry>An incorrectable error occurred.</entry> + <entry>An uncorrectable error occurred.</entry> </row> </tbody> </tgroup> diff --git a/Documentation/DocBook/v4l/dev-teletext.xml b/Documentation/DocBook/v4l/dev-teletext.xml index 76184e8..414b1cf 100644 --- a/Documentation/DocBook/v4l/dev-teletext.xml +++ b/Documentation/DocBook/v4l/dev-teletext.xml @@ -1,35 +1,32 @@ <title>Teletext Interface</title> - <para>This interface aims at devices receiving and demodulating + <para>This interface was aimed at devices receiving and demodulating Teletext data [<xref linkend="ets300706" />, <xref linkend="itu653" />], evaluating the Teletext packages and storing formatted pages in cache memory. Such devices are usually implemented as microcontrollers with serial -interface (I<superscript>2</superscript>C) and can be found on older +interface (I<superscript>2</superscript>C) and could be found on old TV cards, dedicated Teletext decoding cards and home-brew devices connected to the PC parallel port.</para> - <para>The Teletext API was designed by Martin Buck. It is defined in + <para>The Teletext API was designed by Martin Buck. It was defined in the kernel header file <filename>linux/videotext.h</filename>, the specification is available from <ulink url="ftp://ftp.gwdg.de/pub/linux/misc/videotext/"> ftp://ftp.gwdg.de/pub/linux/misc/videotext/</ulink>. (Videotext is the name of -the German public television Teletext service.) Conventional character -device file names are <filename>/dev/vtx</filename> and -<filename>/dev/vttuner</filename>, with device number 83, 0 and 83, 16 -respectively. A similar interface exists for the Philips SAA5249 -Teletext decoder [specification?] with character device file names -<filename>/dev/tlkN</filename>, device number 102, N.</para> +the German public television Teletext service.)</para> <para>Eventually the Teletext API was integrated into the V4L API with character device file names <filename>/dev/vtx0</filename> to <filename>/dev/vtx31</filename>, device major number 81, minor numbers -192 to 223. For reference the V4L Teletext API specification is -reproduced here in full: "Teletext interfaces talk the existing VTX -API." Teletext devices with major number 83 and 102 will be removed in -Linux 2.6.</para> +192 to 223.</para> - <para>There are no plans to replace the Teletext API or to integrate -it into V4L2. Please write to the linux-media mailing list: &v4l-ml; -when the need arises.</para> + <para>However, teletext decoders were quickly replaced by more +generic VBI demodulators and those dedicated teletext decoders no longer exist. +For many years the vtx devices were still around, even though nobody used +them. So the decision was made to finally remove support for the Teletext API in +kernel 2.6.37.</para> + + <para>Modern devices all use the <link linkend="raw-vbi">raw</link> or +<link linkend="sliced">sliced</link> VBI API.</para> <!-- Local Variables: diff --git a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml index 26e8792..4db272b 100644 --- a/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml +++ b/Documentation/DocBook/v4l/pixfmt-packed-rgb.xml @@ -739,7 +739,7 @@ defined in error. Drivers may interpret them as in <xref <entry>b<subscript>1</subscript></entry> <entry>b<subscript>0</subscript></entry> </row> - <row id="V4L2-PIX-FMT-BGR666"> + <row><!-- id="V4L2-PIX-FMT-BGR666" --> <entry><constant>V4L2_PIX_FMT_BGR666</constant></entry> <entry>'BGRH'</entry> <entry></entry> diff --git a/Documentation/DocBook/v4l/pixfmt-srggb10.xml b/Documentation/DocBook/v4l/pixfmt-srggb10.xml new file mode 100644 index 0000000..7b27409 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-srggb10.xml @@ -0,0 +1,90 @@ + <refentry> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_SRGGB10 ('RG10'), + V4L2_PIX_FMT_SGRBG10 ('BA10'), + V4L2_PIX_FMT_SGBRG10 ('GB10'), + V4L2_PIX_FMT_SBGGR10 ('BG10'), + </refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname id="V4L2-PIX-FMT-SRGGB10"><constant>V4L2_PIX_FMT_SRGGB10</constant></refname> + <refname id="V4L2-PIX-FMT-SGRBG10"><constant>V4L2_PIX_FMT_SGRBG10</constant></refname> + <refname id="V4L2-PIX-FMT-SGBRG10"><constant>V4L2_PIX_FMT_SGBRG10</constant></refname> + <refname id="V4L2-PIX-FMT-SBGGR10"><constant>V4L2_PIX_FMT_SBGGR10</constant></refname> + <refpurpose>10-bit Bayer formats expanded to 16 bits</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>The following four pixel formats are raw sRGB / Bayer formats with +10 bits per colour. Each colour component is stored in a 16-bit word, with 6 +unused high bits filled with zeros. Each n-pixel row contains n/2 green samples +and n/2 blue or red samples, with alternating red and blue rows. Bytes are +stored in memory in little endian order. They are conventionally described +as GRGR... BGBG..., RGRG... GBGB..., etc. Below is an example of one of these +formats</para> + + <example> + <title><constant>V4L2_PIX_FMT_SBGGR10</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte, high 6 bits in high bytes are 0. + <informaltable frame="none"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>B<subscript>00low</subscript></entry> + <entry>B<subscript>00high</subscript></entry> + <entry>G<subscript>01low</subscript></entry> + <entry>G<subscript>01high</subscript></entry> + <entry>B<subscript>02low</subscript></entry> + <entry>B<subscript>02high</subscript></entry> + <entry>G<subscript>03low</subscript></entry> + <entry>G<subscript>03high</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>G<subscript>10low</subscript></entry> + <entry>G<subscript>10high</subscript></entry> + <entry>R<subscript>11low</subscript></entry> + <entry>R<subscript>11high</subscript></entry> + <entry>G<subscript>12low</subscript></entry> + <entry>G<subscript>12high</subscript></entry> + <entry>R<subscript>13low</subscript></entry> + <entry>R<subscript>13high</subscript></entry> + </row> + <row> + <entry>start + 16:</entry> + <entry>B<subscript>20low</subscript></entry> + <entry>B<subscript>20high</subscript></entry> + <entry>G<subscript>21low</subscript></entry> + <entry>G<subscript>21high</subscript></entry> + <entry>B<subscript>22low</subscript></entry> + <entry>B<subscript>22high</subscript></entry> + <entry>G<subscript>23low</subscript></entry> + <entry>G<subscript>23high</subscript></entry> + </row> + <row> + <entry>start + 24:</entry> + <entry>G<subscript>30low</subscript></entry> + <entry>G<subscript>30high</subscript></entry> + <entry>R<subscript>31low</subscript></entry> + <entry>R<subscript>31high</subscript></entry> + <entry>G<subscript>32low</subscript></entry> + <entry>G<subscript>32high</subscript></entry> + <entry>R<subscript>33low</subscript></entry> + <entry>R<subscript>33high</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/pixfmt-srggb8.xml b/Documentation/DocBook/v4l/pixfmt-srggb8.xml new file mode 100644 index 0000000..2570e3b --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-srggb8.xml @@ -0,0 +1,67 @@ + <refentry id="V4L2-PIX-FMT-SRGGB8"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_SRGGB8 ('RGGB')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname><constant>V4L2_PIX_FMT_SRGGB8</constant></refname> + <refpurpose>Bayer RGB format</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>This is commonly the native format of digital cameras, +reflecting the arrangement of sensors on the CCD device. Only one red, +green or blue value is given for each pixel. Missing components must +be interpolated from neighbouring pixels. From left to right the first +row consists of a red and green value, the second row of a green and +blue value. This scheme repeats to the right and down for every two +columns and rows.</para> + + <example> + <title><constant>V4L2_PIX_FMT_SRGGB8</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="5" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>R<subscript>00</subscript></entry> + <entry>G<subscript>01</subscript></entry> + <entry>R<subscript>02</subscript></entry> + <entry>G<subscript>03</subscript></entry> + </row> + <row> + <entry>start + 4:</entry> + <entry>G<subscript>10</subscript></entry> + <entry>B<subscript>11</subscript></entry> + <entry>G<subscript>12</subscript></entry> + <entry>B<subscript>13</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>R<subscript>20</subscript></entry> + <entry>G<subscript>21</subscript></entry> + <entry>R<subscript>22</subscript></entry> + <entry>G<subscript>23</subscript></entry> + </row> + <row> + <entry>start + 12:</entry> + <entry>G<subscript>30</subscript></entry> + <entry>B<subscript>31</subscript></entry> + <entry>G<subscript>32</subscript></entry> + <entry>B<subscript>33</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> + </refentry> diff --git a/Documentation/DocBook/v4l/pixfmt-y10.xml b/Documentation/DocBook/v4l/pixfmt-y10.xml new file mode 100644 index 0000000..d065043 --- /dev/null +++ b/Documentation/DocBook/v4l/pixfmt-y10.xml @@ -0,0 +1,79 @@ +<refentry id="V4L2-PIX-FMT-Y10"> + <refmeta> + <refentrytitle>V4L2_PIX_FMT_Y10 ('Y10 ')</refentrytitle> + &manvol; + </refmeta> + <refnamediv> + <refname><constant>V4L2_PIX_FMT_Y10</constant></refname> + <refpurpose>Grey-scale image</refpurpose> + </refnamediv> + <refsect1> + <title>Description</title> + + <para>This is a grey-scale image with a depth of 10 bits per pixel. Pixels +are stored in 16-bit words with unused high bits padded with 0. The least +significant byte is stored at lower memory addresses (little-endian).</para> + + <example> + <title><constant>V4L2_PIX_FMT_Y10</constant> 4 × 4 +pixel image</title> + + <formalpara> + <title>Byte Order.</title> + <para>Each cell is one byte. + <informaltable frame="none"> + <tgroup cols="9" align="center"> + <colspec align="left" colwidth="2*" /> + <tbody valign="top"> + <row> + <entry>start + 0:</entry> + <entry>Y'<subscript>00low</subscript></entry> + <entry>Y'<subscript>00high</subscript></entry> + <entry>Y'<subscript>01low</subscript></entry> + <entry>Y'<subscript>01high</subscript></entry> + <entry>Y'<subscript>02low</subscript></entry> + <entry>Y'<subscript>02high</subscript></entry> + <entry>Y'<subscript>03low</subscript></entry> + <entry>Y'<subscript>03high</subscript></entry> + </row> + <row> + <entry>start + 8:</entry> + <entry>Y'<subscript>10low</subscript></entry> + <entry>Y'<subscript>10high</subscript></entry> + <entry>Y'<subscript>11low</subscript></entry> + <entry>Y'<subscript>11high</subscript></entry> + <entry>Y'<subscript>12low</subscript></entry> + <entry>Y'<subscript>12high</subscript></entry> + <entry>Y'<subscript>13low</subscript></entry> + <entry>Y'<subscript>13high</subscript></entry> + </row> + <row> + <entry>start + 16:</entry> + <entry>Y'<subscript>20low</subscript></entry> + <entry>Y'<subscript>20high</subscript></entry> + <entry>Y'<subscript>21low</subscript></entry> + <entry>Y'<subscript>21high</subscript></entry> + <entry>Y'<subscript>22low</subscript></entry> + <entry>Y'<subscript>22high</subscript></entry> + <entry>Y'<subscript>23low</subscript></entry> + <entry>Y'<subscript>23high</subscript></entry> + </row> + <row> + <entry>start + 24:</entry> + <entry>Y'<subscript>30low</subscript></entry> + <entry>Y'<subscript>30high</subscript></entry> + <entry>Y'<subscript>31low</subscript></entry> + <entry>Y'<subscript>31high</subscript></entry> + <entry>Y'<subscript>32low</subscript></entry> + <entry>Y'<subscript>32high</subscript></entry> + <entry>Y'<subscript>33low</subscript></entry> + <entry>Y'<subscript>33high</subscript></entry> + </row> + </tbody> + </tgroup> + </informaltable> + </para> + </formalpara> + </example> + </refsect1> +</refentry> diff --git a/Documentation/DocBook/v4l/pixfmt.xml b/Documentation/DocBook/v4l/pixfmt.xml index c4ad0a8..d7c4671 100644 --- a/Documentation/DocBook/v4l/pixfmt.xml +++ b/Documentation/DocBook/v4l/pixfmt.xml @@ -566,7 +566,9 @@ access the palette, this must be done with ioctls of the Linux framebuffer API.< &sub-sbggr8; &sub-sgbrg8; &sub-sgrbg8; + &sub-srggb8; &sub-sbggr16; + &sub-srggb10; </section> <section id="yuv-formats"> @@ -589,6 +591,7 @@ information.</para> &sub-packed-yuv; &sub-grey; + &sub-y10; &sub-y16; &sub-yuyv; &sub-uyvy; @@ -685,6 +688,11 @@ http://www.ivtvdriver.org/</ulink></para><para>The format is documented in the kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm12</filename> </para></entry> </row> + <row id="V4L2-PIX-FMT-CPIA1"> + <entry><constant>V4L2_PIX_FMT_CPIA1</constant></entry> + <entry>'CPIA'</entry> + <entry>YUV format used by the gspca cpia1 driver.</entry> + </row> <row id="V4L2-PIX-FMT-SPCA501"> <entry><constant>V4L2_PIX_FMT_SPCA501</constant></entry> <entry>'S501'</entry> @@ -705,11 +713,6 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm <entry>'S561'</entry> <entry>Compressed GBRG Bayer format used by the gspca driver.</entry> </row> - <row id="V4L2-PIX-FMT-SGRBG10"> - <entry><constant>V4L2_PIX_FMT_SGRBG10</constant></entry> - <entry>'DA10'</entry> - <entry>10 bit raw Bayer, expanded to 16 bits.</entry> - </row> <row id="V4L2-PIX-FMT-SGRBG10DPCM8"> <entry><constant>V4L2_PIX_FMT_SGRBG10DPCM8</constant></entry> <entry>'DB10'</entry> @@ -770,6 +773,11 @@ kernel sources in the file <filename>Documentation/video4linux/cx2341x/README.hm <entry>'S920'</entry> <entry>YUV 4:2:0 format of the gspca sn9c20x driver.</entry> </row> + <row id="V4L2-PIX-FMT-SN9C2028"> + <entry><constant>V4L2_PIX_FMT_SN9C2028</constant></entry> + <entry>'SONX'</entry> + <entry>Compressed GBRG bayer format of the gspca sn9c2028 driver.</entry> + </row> <row id="V4L2-PIX-FMT-STV0680"> <entry><constant>V4L2_PIX_FMT_STV0680</constant></entry> <entry>'S680'</entry> @@ -787,6 +795,20 @@ http://www.thedirks.org/winnov/</ulink></para></entry> <entry>'TM60'</entry> <entry><para>Used by Trident tm6000</para></entry> </row> + <row id="V4L2-PIX-FMT-CIT-YYVYUY"> + <entry><constant>V4L2_PIX_FMT_CIT_YYVYUY</constant></entry> + <entry>'CITV'</entry> + <entry><para>Used by xirlink CIT, found at IBM webcams.</para> + <para>Uses one line of Y then 1 line of VYUY</para> + </entry> + </row> + <row id="V4L2-PIX-FMT-KONICA420"> + <entry><constant>V4L2_PIX_FMT_KONICA420</constant></entry> + <entry>'KONI'</entry> + <entry><para>Used by Konica webcams.</para> + <para>YUV420 planar in blocks of 256 pixels.</para> + </entry> + </row> <row id="V4L2-PIX-FMT-YYUV"> <entry><constant>V4L2_PIX_FMT_YYUV</constant></entry> <entry>'YYUV'</entry> diff --git a/Documentation/DocBook/v4l/v4l2.xml b/Documentation/DocBook/v4l/v4l2.xml index 7c3c098..839e93e 100644 --- a/Documentation/DocBook/v4l/v4l2.xml +++ b/Documentation/DocBook/v4l/v4l2.xml @@ -99,6 +99,7 @@ Remote Controller chapter.</contrib> <year>2007</year> <year>2008</year> <year>2009</year> + <year>2010</year> <holder>Bill Dirks, Michael H. Schimek, Hans Verkuil, Martin Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder> </copyright> @@ -110,10 +111,17 @@ Rubli, Andy Walls, Muralidharan Karicheri, Mauro Carvalho Chehab</holder> <!-- Put document revisions here, newest first. --> <!-- API revisions (changes and additions of defines, enums, structs, ioctls) must be noted in more detail in the history chapter -(compat.sgml), along with the possible impact on existing drivers and +(compat.xml), along with the possible impact on existing drivers and applications. --> <revision> + <revnumber>2.6.37</revnumber> + <date>2010-08-06</date> + <authorinitials>hv</authorinitials> + <revremark>Removed obsolete vtx (videotext) API.</revremark> + </revision> + + <revision> <revnumber>2.6.33</revnumber> <date>2009-12-03</date> <authorinitials>mk</authorinitials> diff --git a/Documentation/DocBook/v4l/videodev2.h.xml b/Documentation/DocBook/v4l/videodev2.h.xml index 865b06d..325b23b6 100644 --- a/Documentation/DocBook/v4l/videodev2.h.xml +++ b/Documentation/DocBook/v4l/videodev2.h.xml @@ -154,23 +154,13 @@ enum <link linkend="v4l2-buf-type">v4l2_buf_type</link> { V4L2_BUF_TYPE_VBI_OUTPUT = 5, V4L2_BUF_TYPE_SLICED_VBI_CAPTURE = 6, V4L2_BUF_TYPE_SLICED_VBI_OUTPUT = 7, -#if 1 /*KEEP*/ +#if 1 /* Experimental */ V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY = 8, #endif V4L2_BUF_TYPE_PRIVATE = 0x80, }; -enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> { - V4L2_CTRL_TYPE_INTEGER = 1, - V4L2_CTRL_TYPE_BOOLEAN = 2, - V4L2_CTRL_TYPE_MENU = 3, - V4L2_CTRL_TYPE_BUTTON = 4, - V4L2_CTRL_TYPE_INTEGER64 = 5, - V4L2_CTRL_TYPE_CTRL_CLASS = 6, - V4L2_CTRL_TYPE_STRING = 7, -}; - enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> { V4L2_TUNER_RADIO = 1, V4L2_TUNER_ANALOG_TV = 2, @@ -288,6 +278,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-RGB565">V4L2_PIX_FMT_RGB565</link> v4l2_fourcc('R', 'G', 'B', 'P') /* 16 RGB-5-6-5 */ #define <link linkend="V4L2-PIX-FMT-RGB555X">V4L2_PIX_FMT_RGB555X</link> v4l2_fourcc('R', 'G', 'B', 'Q') /* 16 RGB-5-5-5 BE */ #define <link linkend="V4L2-PIX-FMT-RGB565X">V4L2_PIX_FMT_RGB565X</link> v4l2_fourcc('R', 'G', 'B', 'R') /* 16 RGB-5-6-5 BE */ +#define <link linkend="V4L2-PIX-FMT-BGR666">V4L2_PIX_FMT_BGR666</link> v4l2_fourcc('B', 'G', 'R', 'H') /* 18 BGR-6-6-6 */ #define <link linkend="V4L2-PIX-FMT-BGR24">V4L2_PIX_FMT_BGR24</link> v4l2_fourcc('B', 'G', 'R', '3') /* 24 BGR-8-8-8 */ #define <link linkend="V4L2-PIX-FMT-RGB24">V4L2_PIX_FMT_RGB24</link> v4l2_fourcc('R', 'G', 'B', '3') /* 24 RGB-8-8-8 */ #define <link linkend="V4L2-PIX-FMT-BGR32">V4L2_PIX_FMT_BGR32</link> v4l2_fourcc('B', 'G', 'R', '4') /* 32 BGR-8-8-8-8 */ @@ -295,6 +286,9 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { /* Grey formats */ #define <link linkend="V4L2-PIX-FMT-GREY">V4L2_PIX_FMT_GREY</link> v4l2_fourcc('G', 'R', 'E', 'Y') /* 8 Greyscale */ +#define <link linkend="V4L2-PIX-FMT-Y4">V4L2_PIX_FMT_Y4</link> v4l2_fourcc('Y', '0', '4', ' ') /* 4 Greyscale */ +#define <link linkend="V4L2-PIX-FMT-Y6">V4L2_PIX_FMT_Y6</link> v4l2_fourcc('Y', '0', '6', ' ') /* 6 Greyscale */ +#define <link linkend="V4L2-PIX-FMT-Y10">V4L2_PIX_FMT_Y10</link> v4l2_fourcc('Y', '1', '0', ' ') /* 10 Greyscale */ #define <link linkend="V4L2-PIX-FMT-Y16">V4L2_PIX_FMT_Y16</link> v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ /* Palette formats */ @@ -330,7 +324,11 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-SBGGR8">V4L2_PIX_FMT_SBGGR8</link> v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define <link linkend="V4L2-PIX-FMT-SGBRG8">V4L2_PIX_FMT_SGBRG8</link> v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ #define <link linkend="V4L2-PIX-FMT-SGRBG8">V4L2_PIX_FMT_SGRBG8</link> v4l2_fourcc('G', 'R', 'B', 'G') /* 8 GRGR.. BGBG.. */ -#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10bit raw bayer */ +#define <link linkend="V4L2-PIX-FMT-SRGGB8">V4L2_PIX_FMT_SRGGB8</link> v4l2_fourcc('R', 'G', 'G', 'B') /* 8 RGRG.. GBGB.. */ +#define <link linkend="V4L2-PIX-FMT-SBGGR10">V4L2_PIX_FMT_SBGGR10</link> v4l2_fourcc('B', 'G', '1', '0') /* 10 BGBG.. GRGR.. */ +#define <link linkend="V4L2-PIX-FMT-SGBRG10">V4L2_PIX_FMT_SGBRG10</link> v4l2_fourcc('G', 'B', '1', '0') /* 10 GBGB.. RGRG.. */ +#define <link linkend="V4L2-PIX-FMT-SGRBG10">V4L2_PIX_FMT_SGRBG10</link> v4l2_fourcc('B', 'A', '1', '0') /* 10 GRGR.. BGBG.. */ +#define <link linkend="V4L2-PIX-FMT-SRGGB10">V4L2_PIX_FMT_SRGGB10</link> v4l2_fourcc('R', 'G', '1', '0') /* 10 RGRG.. GBGB.. */ /* 10bit raw bayer DPCM compressed to 8 bits */ #define <link linkend="V4L2-PIX-FMT-SGRBG10DPCM8">V4L2_PIX_FMT_SGRBG10DPCM8</link> v4l2_fourcc('B', 'D', '1', '0') /* @@ -346,6 +344,7 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-MPEG">V4L2_PIX_FMT_MPEG</link> v4l2_fourcc('M', 'P', 'E', 'G') /* MPEG-1/2/4 */ /* Vendor-specific formats */ +#define <link linkend="V4L2-PIX-FMT-CPIA1">V4L2_PIX_FMT_CPIA1</link> v4l2_fourcc('C', 'P', 'I', 'A') /* cpia1 YUV */ #define <link linkend="V4L2-PIX-FMT-WNVA">V4L2_PIX_FMT_WNVA</link> v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */ #define <link linkend="V4L2-PIX-FMT-SN9C10X">V4L2_PIX_FMT_SN9C10X</link> v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */ #define <link linkend="V4L2-PIX-FMT-SN9C20X-I420">V4L2_PIX_FMT_SN9C20X_I420</link> v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */ @@ -358,12 +357,15 @@ struct <link linkend="v4l2-pix-format">v4l2_pix_format</link> { #define <link linkend="V4L2-PIX-FMT-SPCA561">V4L2_PIX_FMT_SPCA561</link> v4l2_fourcc('S', '5', '6', '1') /* compressed GBRG bayer */ #define <link linkend="V4L2-PIX-FMT-PAC207">V4L2_PIX_FMT_PAC207</link> v4l2_fourcc('P', '2', '0', '7') /* compressed BGGR bayer */ #define <link linkend="V4L2-PIX-FMT-MR97310A">V4L2_PIX_FMT_MR97310A</link> v4l2_fourcc('M', '3', '1', '0') /* compressed BGGR bayer */ +#define <link linkend="V4L2-PIX-FMT-SN9C2028">V4L2_PIX_FMT_SN9C2028</link> v4l2_fourcc('S', 'O', 'N', 'X') /* compressed GBRG bayer */ #define <link linkend="V4L2-PIX-FMT-SQ905C">V4L2_PIX_FMT_SQ905C</link> v4l2_fourcc('9', '0', '5', 'C') /* compressed RGGB bayer */ #define <link linkend="V4L2-PIX-FMT-PJPG">V4L2_PIX_FMT_PJPG</link> v4l2_fourcc('P', 'J', 'P', 'G') /* Pixart 73xx JPEG */ #define <link linkend="V4L2-PIX-FMT-OV511">V4L2_PIX_FMT_OV511</link> v4l2_fourcc('O', '5', '1', '1') /* ov511 JPEG */ #define <link linkend="V4L2-PIX-FMT-OV518">V4L2_PIX_FMT_OV518</link> v4l2_fourcc('O', '5', '1', '8') /* ov518 JPEG */ -#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link> v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ #define <link linkend="V4L2-PIX-FMT-STV0680">V4L2_PIX_FMT_STV0680</link> v4l2_fourcc('S', '6', '8', '0') /* stv0680 bayer */ +#define <link linkend="V4L2-PIX-FMT-TM6000">V4L2_PIX_FMT_TM6000</link> v4l2_fourcc('T', 'M', '6', '0') /* tm5600/tm60x0 */ +#define <link linkend="V4L2-PIX-FMT-CIT-YYVYUY">V4L2_PIX_FMT_CIT_YYVYUY</link> v4l2_fourcc('C', 'I', 'T', 'V') /* one line of Y then 1 line of VYUY */ +#define <link linkend="V4L2-PIX-FMT-KONICA420">V4L2_PIX_FMT_KONICA420</link> v4l2_fourcc('K', 'O', 'N', 'I') /* YUV420 planar in blocks of 256 pixels */ /* * F O R M A T E N U M E R A T I O N @@ -380,7 +382,7 @@ struct <link linkend="v4l2-fmtdesc">v4l2_fmtdesc</link> { #define V4L2_FMT_FLAG_COMPRESSED 0x0001 #define V4L2_FMT_FLAG_EMULATED 0x0002 -#if 1 /*KEEP*/ +#if 1 /* Experimental Frame Size and frame rate enumeration */ /* * F R A M E S I Z E E N U M E R A T I O N @@ -544,6 +546,8 @@ struct <link linkend="v4l2-buffer">v4l2_buffer</link> { #define V4L2_BUF_FLAG_KEYFRAME 0x0008 /* Image is a keyframe (I-frame) */ #define V4L2_BUF_FLAG_PFRAME 0x0010 /* Image is a P-frame */ #define V4L2_BUF_FLAG_BFRAME 0x0020 /* Image is a B-frame */ +/* Buffer is ready, but the data contained within is corrupted. */ +#define V4L2_BUF_FLAG_ERROR 0x0040 #define V4L2_BUF_FLAG_TIMECODE 0x0100 /* timecode field is valid */ #define V4L2_BUF_FLAG_INPUT 0x0200 /* input field is valid */ @@ -934,6 +938,16 @@ struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link> { #define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL) #define V4L2_CTRL_DRIVER_PRIV(id) (((id) & 0xffff) >= 0x1000) +enum <link linkend="v4l2-ctrl-type">v4l2_ctrl_type</link> { + V4L2_CTRL_TYPE_INTEGER = 1, + V4L2_CTRL_TYPE_BOOLEAN = 2, + V4L2_CTRL_TYPE_MENU = 3, + V4L2_CTRL_TYPE_BUTTON = 4, + V4L2_CTRL_TYPE_INTEGER64 = 5, + V4L2_CTRL_TYPE_CTRL_CLASS = 6, + V4L2_CTRL_TYPE_STRING = 7, +}; + /* Used in the VIDIOC_QUERYCTRL ioctl for querying controls */ struct <link linkend="v4l2-queryctrl">v4l2_queryctrl</link> { __u32 id; @@ -1018,21 +1032,27 @@ enum <link linkend="v4l2-colorfx">v4l2_colorfx</link> { V4L2_COLORFX_NONE = 0, V4L2_COLORFX_BW = 1, V4L2_COLORFX_SEPIA = 2, - V4L2_COLORFX_NEGATIVE = 3, - V4L2_COLORFX_EMBOSS = 4, - V4L2_COLORFX_SKETCH = 5, - V4L2_COLORFX_SKY_BLUE = 6, + V4L2_COLORFX_NEGATIVE = 3, + V4L2_COLORFX_EMBOSS = 4, + V4L2_COLORFX_SKETCH = 5, + V4L2_COLORFX_SKY_BLUE = 6, V4L2_COLORFX_GRASS_GREEN = 7, V4L2_COLORFX_SKIN_WHITEN = 8, - V4L2_COLORFX_VIVID = 9. + V4L2_COLORFX_VIVID = 9, }; #define V4L2_CID_AUTOBRIGHTNESS (V4L2_CID_BASE+32) #define V4L2_CID_BAND_STOP_FILTER (V4L2_CID_BASE+33) #define V4L2_CID_ROTATE (V4L2_CID_BASE+34) #define V4L2_CID_BG_COLOR (V4L2_CID_BASE+35) + +#define V4L2_CID_CHROMA_GAIN (V4L2_CID_BASE+36) + +#define V4L2_CID_ILLUMINATORS_1 (V4L2_CID_BASE+37) +#define V4L2_CID_ILLUMINATORS_2 (V4L2_CID_BASE+38) + /* last CID + 1 */ -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+36) +#define V4L2_CID_LASTP1 (V4L2_CID_BASE+39) /* MPEG-class control IDs defined by V4L2 */ #define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900) @@ -1349,6 +1369,8 @@ struct <link linkend="v4l2-modulator">v4l2_modulator</link> { #define V4L2_TUNER_CAP_SAP 0x0020 #define V4L2_TUNER_CAP_LANG1 0x0040 #define V4L2_TUNER_CAP_RDS 0x0080 +#define V4L2_TUNER_CAP_RDS_BLOCK_IO 0x0100 +#define V4L2_TUNER_CAP_RDS_CONTROLS 0x0200 /* Flags for the 'rxsubchans' field */ #define V4L2_TUNER_SUB_MONO 0x0001 @@ -1378,7 +1400,8 @@ struct <link linkend="v4l2-hw-freq-seek">v4l2_hw_freq_seek</link> { enum <link linkend="v4l2-tuner-type">v4l2_tuner_type</link> type; __u32 seek_upward; __u32 wrap_around; - __u32 reserved[8]; + __u32 spacing; + __u32 reserved[7]; }; /* @@ -1433,7 +1456,7 @@ struct <link linkend="v4l2-audioout">v4l2_audioout</link> { * * NOTE: EXPERIMENTAL API */ -#if 1 /*KEEP*/ +#if 1 #define V4L2_ENC_IDX_FRAME_I (0) #define V4L2_ENC_IDX_FRAME_P (1) #define V4L2_ENC_IDX_FRAME_B (2) @@ -1626,6 +1649,38 @@ struct <link linkend="v4l2-streamparm">v4l2_streamparm</link> { }; /* + * E V E N T S + */ + +#define V4L2_EVENT_ALL 0 +#define V4L2_EVENT_VSYNC 1 +#define V4L2_EVENT_EOS 2 +#define V4L2_EVENT_PRIVATE_START 0x08000000 + +/* Payload for V4L2_EVENT_VSYNC */ +struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> { + /* Can be V4L2_FIELD_ANY, _NONE, _TOP or _BOTTOM */ + __u8 field; +} __attribute__ ((packed)); + +struct <link linkend="v4l2-event">v4l2_event</link> { + __u32 type; + union { + struct <link linkend="v4l2-event-vsync">v4l2_event_vsync</link> vsync; + __u8 data[64]; + } u; + __u32 pending; + __u32 sequence; + struct timespec timestamp; + __u32 reserved[9]; +}; + +struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link> { + __u32 type; + __u32 reserved[7]; +}; + +/* * A D V A N C E D D E B U G G I N G * * NOTE: EXPERIMENTAL API, NEVER RELY ON THIS IN APPLICATIONS! @@ -1720,7 +1775,7 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> { #define VIDIOC_G_EXT_CTRLS _IOWR('V', 71, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>) #define VIDIOC_S_EXT_CTRLS _IOWR('V', 72, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>) #define VIDIOC_TRY_EXT_CTRLS _IOWR('V', 73, struct <link linkend="v4l2-ext-controls">v4l2_ext_controls</link>) -#if 1 /*KEEP*/ +#if 1 #define VIDIOC_ENUM_FRAMESIZES _IOWR('V', 74, struct <link linkend="v4l2-frmsizeenum">v4l2_frmsizeenum</link>) #define VIDIOC_ENUM_FRAMEINTERVALS _IOWR('V', 75, struct <link linkend="v4l2-frmivalenum">v4l2_frmivalenum</link>) #define VIDIOC_G_ENC_INDEX _IOR('V', 76, struct <link linkend="v4l2-enc-idx">v4l2_enc_idx</link>) @@ -1728,7 +1783,7 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> { #define VIDIOC_TRY_ENCODER_CMD _IOWR('V', 78, struct <link linkend="v4l2-encoder-cmd">v4l2_encoder_cmd</link>) #endif -#if 1 /*KEEP*/ +#if 1 /* Experimental, meant for debugging, testing and internal use. Only implemented if CONFIG_VIDEO_ADV_DEBUG is defined. You must be root to use these ioctls. Never use these in applications! */ @@ -1747,6 +1802,9 @@ struct <link linkend="v4l2-dbg-chip-ident">v4l2_dbg_chip_ident</link> { #define VIDIOC_QUERY_DV_PRESET _IOR('V', 86, struct <link linkend="v4l2-dv-preset">v4l2_dv_preset</link>) #define VIDIOC_S_DV_TIMINGS _IOWR('V', 87, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>) #define VIDIOC_G_DV_TIMINGS _IOWR('V', 88, struct <link linkend="v4l2-dv-timings">v4l2_dv_timings</link>) +#define VIDIOC_DQEVENT _IOR('V', 89, struct <link linkend="v4l2-event">v4l2_event</link>) +#define VIDIOC_SUBSCRIBE_EVENT _IOW('V', 90, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>) +#define VIDIOC_UNSUBSCRIBE_EVENT _IOW('V', 91, struct <link linkend="v4l2-event-subscription">v4l2_event_subscription</link>) /* Reminder: when adding new ioctls please add support for them to drivers/media/video/v4l2-compat-ioctl32.c as well! */ diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml index 3c6784e..d733721 100644 --- a/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml +++ b/Documentation/DocBook/v4l/vidioc-g-dv-preset.xml @@ -16,8 +16,7 @@ <funcdef>int <function>ioctl</function></funcdef> <paramdef>int <parameter>fd</parameter></paramdef> <paramdef>int <parameter>request</parameter></paramdef> - <paramdef>&v4l2-dv-preset; -*<parameter>argp</parameter></paramdef> + <paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef> </funcprototype> </funcsynopsis> </refsynopsisdiv> diff --git a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml index ecc1957..d5ec6ab 100644 --- a/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml +++ b/Documentation/DocBook/v4l/vidioc-g-dv-timings.xml @@ -16,8 +16,7 @@ <funcdef>int <function>ioctl</function></funcdef> <paramdef>int <parameter>fd</parameter></paramdef> <paramdef>int <parameter>request</parameter></paramdef> - <paramdef>&v4l2-dv-timings; -*<parameter>argp</parameter></paramdef> + <paramdef>struct v4l2_dv_timings *<parameter>argp</parameter></paramdef> </funcprototype> </funcsynopsis> </refsynopsisdiv> diff --git a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml index 402229e..d272f7a 100644 --- a/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml +++ b/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml @@ -16,7 +16,7 @@ input</refpurpose> <funcdef>int <function>ioctl</function></funcdef> <paramdef>int <parameter>fd</parameter></paramdef> <paramdef>int <parameter>request</parameter></paramdef> - <paramdef>&v4l2-dv-preset; *<parameter>argp</parameter></paramdef> + <paramdef>struct v4l2_dv_preset *<parameter>argp</parameter></paramdef> </funcprototype> </funcsynopsis> </refsynopsisdiv> diff --git a/Documentation/DocBook/v4l/vidioc-querycap.xml b/Documentation/DocBook/v4l/vidioc-querycap.xml index 6ab7e25..d499da9 100644 --- a/Documentation/DocBook/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/v4l/vidioc-querycap.xml @@ -184,7 +184,7 @@ data.</entry> <row> <entry><constant>V4L2_CAP_RDS_CAPTURE</constant></entry> <entry>0x00000100</entry> - <entry>The device supports the <link linkend="rds">RDS</link> interface.</entry> + <entry>The device supports the <link linkend="rds">RDS</link> capture interface.</entry> </row> <row> <entry><constant>V4L2_CAP_VIDEO_OUTPUT_OVERLAY</constant></entry> @@ -206,6 +206,11 @@ driver capabilities.</para></footnote></entry> hardware frequency seeking.</entry> </row> <row> + <entry><constant>V4L2_CAP_RDS_OUTPUT</constant></entry> + <entry>0x00000800</entry> + <entry>The device supports the <link linkend="rds">RDS</link> output interface.</entry> + </row> + <row> <entry><constant>V4L2_CAP_TUNER</constant></entry> <entry>0x00010000</entry> <entry>The device has some sort of tuner to diff --git a/Documentation/DocBook/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/v4l/vidioc-queryctrl.xml index 8e0e055..0d5e828 100644 --- a/Documentation/DocBook/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/v4l/vidioc-queryctrl.xml @@ -103,8 +103,12 @@ structure. The driver fills the rest of the structure or returns an <structfield>index</structfield> is invalid. Menu items are enumerated by calling <constant>VIDIOC_QUERYMENU</constant> with successive <structfield>index</structfield> values from &v4l2-queryctrl; -<structfield>minimum</structfield> (0) to -<structfield>maximum</structfield>, inclusive.</para> +<structfield>minimum</structfield> to +<structfield>maximum</structfield>, inclusive. Note that it is possible +for <constant>VIDIOC_QUERYMENU</constant> to return an &EINVAL; for some +indices between <structfield>minimum</structfield> and <structfield>maximum</structfield>. +In that case that particular menu item is not supported by this driver. Also note that +the <structfield>minimum</structfield> value is not necessarily 0.</para> <para>See also the examples in <xref linkend="control" />.</para> @@ -139,7 +143,7 @@ string. This information is intended for the user.</entry> <entry><structfield>minimum</structfield></entry> <entry>Minimum value, inclusive. This field gives a lower bound for <constant>V4L2_CTRL_TYPE_INTEGER</constant> controls and the -lowest valid index (always 0) for <constant>V4L2_CTRL_TYPE_MENU</constant> controls. +lowest valid index for <constant>V4L2_CTRL_TYPE_MENU</constant> controls. For <constant>V4L2_CTRL_TYPE_STRING</constant> controls the minimum value gives the minimum length of the string. This length <emphasis>does not include the terminating zero</emphasis>. It may not be valid for any other type of control, including @@ -279,7 +283,7 @@ values which are actually different on the hardware.</entry> </row> <row> <entry><constant>V4L2_CTRL_TYPE_MENU</constant></entry> - <entry>0</entry> + <entry>≥ 0</entry> <entry>1</entry> <entry>N-1</entry> <entry>The control has a menu of N choices. The names of @@ -405,8 +409,10 @@ writing a value will cause the device to carry out a given action <term><errorcode>EINVAL</errorcode></term> <listitem> <para>The &v4l2-queryctrl; <structfield>id</structfield> -is invalid. The &v4l2-querymenu; <structfield>id</structfield> or -<structfield>index</structfield> is invalid.</para> +is invalid. The &v4l2-querymenu; <structfield>id</structfield> is +invalid or <structfield>index</structfield> is out of range (less than +<structfield>minimum</structfield> or greater than <structfield>maximum</structfield>) +or this particular menu item is not supported by the driver.</para> </listitem> </varlistentry> <varlistentry> diff --git a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml index 14b3ec7..c30dcc4 100644 --- a/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/v4l/vidioc-s-hw-freq-seek.xml @@ -51,7 +51,8 @@ <para>Start a hardware frequency seek from the current frequency. To do this applications initialize the <structfield>tuner</structfield>, -<structfield>type</structfield>, <structfield>seek_upward</structfield> and +<structfield>type</structfield>, <structfield>seek_upward</structfield>, +<structfield>spacing</structfield> and <structfield>wrap_around</structfield> fields, and zero out the <structfield>reserved</structfield> array of a &v4l2-hw-freq-seek; and call the <constant>VIDIOC_S_HW_FREQ_SEEK</constant> ioctl with a pointer @@ -89,7 +90,12 @@ field and the &v4l2-tuner; <structfield>index</structfield> field.</entry> </row> <row> <entry>__u32</entry> - <entry><structfield>reserved</structfield>[8]</entry> + <entry><structfield>spacing</structfield></entry> + <entry>If non-zero, defines the hardware seek resolution in Hz. The driver selects the nearest value that is supported by the device. If spacing is zero a reasonable default value is used.</entry> + </row> + <row> + <entry>__u32</entry> + <entry><structfield>reserved</structfield>[7]</entry> <entry>Reserved for future extensions. Drivers and applications must set the array to zero.</entry> </row> diff --git a/Documentation/devices.txt b/Documentation/devices.txt index c58abf1..eccffe7 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -1496,9 +1496,6 @@ Your cooperation is appreciated. 64 = /dev/radio0 Radio device ... 127 = /dev/radio63 Radio device - 192 = /dev/vtx0 Teletext device - ... - 223 = /dev/vtx31 Teletext device 224 = /dev/vbi0 Vertical blank interrupt ... 255 = /dev/vbi31 Vertical blank interrupt @@ -2520,6 +2517,12 @@ Your cooperation is appreciated. 8 = /dev/mmcblk1 Second SD/MMC card ... + The start of next SD/MMC card can be configured with + CONFIG_MMC_BLOCK_MINORS, or overridden at boot/modprobe + time using the mmcblk.perdev_minors option. That would + bump the offset between each card to be the configured + value instead of the default 8. + 179 char CCube DVXChip-based PCI products 0 = /dev/dvxirq0 First DVX device 1 = /dev/dvxirq1 Second DVX device diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 350959f..59690de 100644 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -26,7 +26,8 @@ use IO::Handle; "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004", "or51211", "or51132_qam", "or51132_vsb", "bluebird", "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718", - "af9015", "ngene", "az6027"); + "af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395", + "lme2510c_s7395_old"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -584,6 +585,49 @@ sub az6027{ $firmware; } + +sub lme2510_lg { + my $sourcefile = "LMEBDA_DVBS.sys"; + my $hash = "fc6017ad01e79890a97ec53bea157ed2"; + my $outfile = "dvb-usb-lme2510-lg.fw"; + my $hasho = "caa065d5fdbd2c09ad57b399bbf55cad"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 4168, 3841, $outfile); + verify($outfile, $hasho); + $outfile; +} + +sub lme2510c_s7395 { + my $sourcefile = "US2A0D.sys"; + my $hash = "b0155a8083fb822a3bd47bc360e74601"; + my $outfile = "dvb-usb-lme2510c-s7395.fw"; + my $hasho = "3a3cf1aeebd17b6ddc04cebe131e94cf"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 37248, 3720, $outfile); + verify($outfile, $hasho); + $outfile; +} + +sub lme2510c_s7395_old { + my $sourcefile = "LMEBDA_DVBS7395C.sys"; + my $hash = "7572ae0eb9cdf91baabd7c0ba9e09b31"; + my $outfile = "dvb-usb-lme2510c-s7395.fw"; + my $hasho = "90430c5b435eb5c6f88fd44a9d950674"; + + checkstandard(); + + verify($sourcefile, $hash); + extract($sourcefile, 4208, 3881, $outfile); + verify($outfile, $hasho); + $outfile; +} + # --------------------------------------------------------------- # Utilities diff --git a/Documentation/dvb/lmedm04.txt b/Documentation/dvb/lmedm04.txt new file mode 100644 index 0000000..e175784 --- /dev/null +++ b/Documentation/dvb/lmedm04.txt @@ -0,0 +1,58 @@ +To extract firmware for the DM04/QQBOX you need to copy the +following file(s) to this directory. + +for DM04+/QQBOX LME2510C (Sharp 7395 Tuner) +------------------------------------------- + +The Sharp 7395 driver can be found in windows/system32/driver + +US2A0D.sys (dated 17 Mar 2009) + + +and run +./get_dvb_firmware lme2510c_s7395 + + will produce + dvb-usb-lme2510c-s7395.fw + +An alternative but older firmware can be found on the driver +disk DVB-S_EN_3.5A in BDADriver/driver + +LMEBDA_DVBS7395C.sys (dated 18 Jan 2008) + +and run +./get_dvb_firmware lme2510c_s7395_old + + will produce + dvb-usb-lme2510c-s7395.fw + +-------------------------------------------------------------------- + +The LG firmware can be found on the driver +disk DM04+_5.1A[LG] in BDADriver/driver + +for DM04 LME2510 (LG Tuner) +--------------------------- + +LMEBDA_DVBS.sys (dated 13 Nov 2007) + +and run +./get_dvb_firmware lme2510_lg + + will produce + dvb-usb-lme2510-lg.fw + + +Other LG firmware can be extracted manually from US280D.sys +only found in windows/system32/driver. + +dd if=US280D.sys ibs=1 skip=42616 count=3668 of=dvb-usb-lme2510-lg.fw + +for DM04 LME2510C (LG Tuner) +--------------------------- + +dd if=US280D.sys ibs=1 skip=35200 count=3850 of=dvb-usb-lme2510c-lg.fw + +--------------------------------------------------------------------- + +Copy the firmware file(s) to /lib/firmware diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f3da8c0..d8f36f9 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -98,7 +98,7 @@ Who: Pavel Machek <pavel@ucw.cz> --------------------------- What: Video4Linux API 1 ioctls and from Video devices. -When: July 2009 +When: kernel 2.6.38 Files: include/linux/videodev.h Check: include/linux/videodev.h Why: V4L1 AP1 was replaced by V4L2 API during migration from 2.4 to 2.6 @@ -116,6 +116,21 @@ Who: Mauro Carvalho Chehab <mchehab@infradead.org> --------------------------- +What: Video4Linux obsolete drivers using V4L1 API +When: kernel 2.6.38 +Files: drivers/staging/cpia/* drivers/staging/stradis/* +Check: drivers/staging/cpia/cpia.c drivers/staging/stradis/stradis.c +Why: There are some drivers still using V4L1 API, despite all efforts we've done + to migrate. Those drivers are for obsolete hardware that the old maintainer + didn't care (or not have the hardware anymore), and that no other developer + could find any hardware to buy. They probably have no practical usage today, + and people with such old hardware could probably keep using an older version + of the kernel. Those drivers will be moved to staging on 2.6.37 and, if nobody + care enough to port and test them with V4L2 API, they'll be removed on 2.6.38. +Who: Mauro Carvalho Chehab <mchehab@infradead.org> + +--------------------------- + What: sys_sysctl When: September 2010 Option: CONFIG_SYSCTL_SYSCALL @@ -470,29 +485,6 @@ When: April 2011 Why: Superseded by xt_CT Who: Netfilter developer team <netfilter-devel@vger.kernel.org> ---------------------------- - -What: video4linux /dev/vtx teletext API support -When: 2.6.35 -Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c - include/linux/videotext.h -Why: The vtx device nodes have been superseded by vbi device nodes - for many years. No applications exist that use the vtx support. - Of the two i2c drivers that actually support this API the saa5249 - has been impossible to use for a year now and no known hardware - that supports this device exists. The saa5246a is theoretically - supported by the old mxb boards, but it never actually worked. - - In summary: there is no hardware that can use this API and there - are no applications actually implementing this API. - - The vtx support still reserves minors 192-223 and we would really - like to reuse those for upcoming new functionality. In the unlikely - event that new hardware appears that wants to use the functionality - provided by the vtx API, then that functionality should be build - around the sliced VBI API instead. -Who: Hans Verkuil <hverkuil@xs4all.nl> - ---------------------------- What: IRQF_DISABLED diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 4303614..8c624a1 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -96,8 +96,6 @@ seq_file.txt - how to use the seq_file API sharedsubtree.txt - a description of shared subtrees for namespaces. -smbfs.txt - - info on using filesystems with the SMB protocol (Win 3.11 and NT). spufs.txt - info and mount options for the SPU filesystem used on Cell. sysfs-pci.txt diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt index f9765e8..b22abba 100644 --- a/Documentation/filesystems/9p.txt +++ b/Documentation/filesystems/9p.txt @@ -111,7 +111,7 @@ OPTIONS This can be used to share devices/named pipes/sockets between hosts. This functionality will be expanded in later versions. - access there are three access modes. + access there are four access modes. user = if a user tries to access a file on v9fs filesystem for the first time, v9fs sends an attach command (Tattach) for that user. @@ -120,6 +120,8 @@ OPTIONS the files on the mounted filesystem any = v9fs does single attach and performs all operations as one user + client = ACL based access check on the 9p client + side for access validation cachetag cache tag to use the specified persistent cache. cache tags for existing cache sessions can be listed at diff --git a/Documentation/filesystems/smbfs.txt b/Documentation/filesystems/smbfs.txt deleted file mode 100644 index 194fb0d..0000000 --- a/Documentation/filesystems/smbfs.txt +++ /dev/null @@ -1,8 +0,0 @@ -Smbfs is a filesystem that implements the SMB protocol, which is the -protocol used by Windows for Workgroups, Windows 95 and Windows NT. -Smbfs was inspired by Samba, the program written by Andrew Tridgell -that turns any Unix host into a file server for DOS or Windows clients. - -Smbfs is a SMB client, but uses parts of samba for its operation. For -more info on samba, including documentation, please go to -http://www.samba.org/ and then on to your nearest mirror. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 33223ff..63ffd78 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -259,7 +259,7 @@ Code Seq#(hex) Include File Comments 't' 00-7F linux/if_ppp.h 't' 80-8F linux/isdn_ppp.h 't' 90 linux/toshiba.h -'u' 00-1F linux/smb_fs.h +'u' 00-1F linux/smb_fs.h gone 'v' all linux/videodev.h conflict! 'v' 00-1F linux/ext2_fs.h conflict! 'v' 00-1F linux/fs.h conflict! @@ -278,7 +278,6 @@ Code Seq#(hex) Include File Comments <mailto:oe@port.de> 'z' 10-4F drivers/s390/crypto/zcrypt_api.h conflict! 0x80 00-1F linux/fb.h -0x81 00-1F linux/videotext.h 0x88 00-3F media/ovcamchip.h 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4bc2f3c3..ed45e98 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2175,6 +2175,11 @@ and is between 256 and 4096 characters. It is defined in the file reset_devices [KNL] Force drivers to reset the underlying device during initialization. + resource_alloc_from_bottom + Allocate new resources from the beginning of available + space, not the end. If you need to use this, please + report a bug. + resume= [SWSUSP] Specify the partition device for software suspend diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index f251054..42517d9 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -83,3 +83,4 @@ 82 -> WinFast DTV2000 H rev. J [107d:6f2b] 83 -> Prof 7301 DVB-S/S2 [b034:3034] 84 -> Samsung SMT 7020 DVB-S [18ac:dc00,18ac:dccd] + 85 -> Twinhan VP-1027 DVB-S [1822:0023] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 5c56875..ac2616a 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -31,6 +31,7 @@ 30 -> Videology 20K14XUSB USB2.0 (em2820/em2840) 31 -> Usbgear VD204v9 (em2821) 32 -> Supercomp USB 2.0 TV (em2821) + 33 -> Elgato Video Capture (em2860) [0fd9:0033] 34 -> Terratec Cinergy A Hybrid XS (em2860) [0ccd:004f] 35 -> Typhoon DVD Maker (em2860) 36 -> NetGMBH Cam (em2860) @@ -45,7 +46,7 @@ 45 -> Pinnacle PCTV DVB-T (em2870) 46 -> Compro, VideoMate U3 (em2870) [185b:2870] 47 -> KWorld DVB-T 305U (em2880) [eb1a:e305] - 48 -> KWorld DVB-T 310U (em2880) [eb1a:e310] + 48 -> KWorld DVB-T 310U (em2880) 49 -> MSI DigiVox A/D (em2880) [eb1a:e310] 50 -> MSI DigiVox A/D II (em2880) [eb1a:e320] 51 -> Terratec Hybrid XS Secam (em2880) [0ccd:004c] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 4000c29..8d9afc7 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -126,7 +126,7 @@ 125 -> Beholder BeholdTV 409 [0000:4090] 126 -> Beholder BeholdTV 505 FM [5ace:5050] 127 -> Beholder BeholdTV 507 FM / BeholdTV 509 FM [5ace:5070,5ace:5090] -128 -> Beholder BeholdTV Columbus TVFM [0000:5201] +128 -> Beholder BeholdTV Columbus TV/FM [0000:5201] 129 -> Beholder BeholdTV 607 FM [5ace:6070] 130 -> Beholder BeholdTV M6 [5ace:6190] 131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022] diff --git a/Documentation/video4linux/bttv/MAKEDEV b/Documentation/video4linux/bttv/MAKEDEV index 9d112f7..093c0cd 100644 --- a/Documentation/video4linux/bttv/MAKEDEV +++ b/Documentation/video4linux/bttv/MAKEDEV @@ -19,7 +19,6 @@ function makedev () { echo "*** new device names ***" makedev video 0 makedev radio 64 -makedev vtx 192 makedev vbi 224 #echo "*** old device names (for compatibility only) ***" diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt index 56ba7bb..6a562ee 100644 --- a/Documentation/video4linux/gspca.txt +++ b/Documentation/video4linux/gspca.txt @@ -302,12 +302,14 @@ sonixj 0c45:60fb Surfer NoName sonixj 0c45:60fc LG-LIC300 sonixj 0c45:60fe Microdia Audio sonixj 0c45:6100 PC Camera (SN9C128) +sonixj 0c45:6102 PC Camera (SN9C128) sonixj 0c45:610a PC Camera (SN9C128) sonixj 0c45:610b PC Camera (SN9C128) sonixj 0c45:610c PC Camera (SN9C128) sonixj 0c45:610e PC Camera (SN9C128) sonixj 0c45:6128 Microdia/Sonix SNP325 sonixj 0c45:612a Avant Camera +sonixj 0c45:612b Speed-Link REFLECT2 sonixj 0c45:612c Typhoon Rasy Cam 1.3MPix sonixj 0c45:6130 Sonix Pccam sonixj 0c45:6138 Sn9c120 Mo4000 diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index e831aac..f22f35c 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -44,8 +44,8 @@ All drivers have the following structure: 2) A way of initializing and commanding sub-devices (if any). -3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX, /dev/radioX and - /dev/vtxX) and keeping track of device-node specific data. +3) Creating V4L2 device nodes (/dev/videoX, /dev/vbiX and /dev/radioX) + and keeping track of device-node specific data. 4) Filehandle-specific structs containing per-filehandle data; @@ -192,6 +192,11 @@ You also need a way to go from the low-level struct to v4l2_subdev. For the common i2c_client struct the i2c_set_clientdata() call is used to store a v4l2_subdev pointer, for other busses you may have to use other methods. +Bridges might also need to store per-subdev private data, such as a pointer to +bridge-specific per-subdev private data. The v4l2_subdev structure provides +host private data for that purpose that can be accessed with +v4l2_get_subdev_hostdata() and v4l2_set_subdev_hostdata(). + From the bridge driver perspective you load the sub-device module and somehow obtain the v4l2_subdev pointer. For i2c devices this is easy: you call i2c_get_clientdata(). For other busses something similar needs to be done. @@ -448,6 +453,10 @@ You should also set these fields: - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the future!), then set this to your v4l2_ioctl_ops struct. +- lock: leave to NULL if you want to do all the locking in the driver. + Otherwise you give it a pointer to a struct mutex_lock and before any + of the v4l2_file_operations is called this lock will be taken by the + core and released afterwards. - parent: you only set this if v4l2_device was registered with NULL as the parent device struct. This only happens in cases where one hardware device has multiple PCI devices that all share the same v4l2_device core. @@ -464,6 +473,22 @@ If you use v4l2_ioctl_ops, then you should set either .unlocked_ioctl or The v4l2_file_operations struct is a subset of file_operations. The main difference is that the inode argument is omitted since it is never used. +v4l2_file_operations and locking +-------------------------------- + +You can set a pointer to a mutex_lock in struct video_device. Usually this +will be either a top-level mutex or a mutex per device node. If you want +finer-grained locking then you have to set it to NULL and do you own locking. + +If a lock is specified then all file operations will be serialized on that +lock. If you use videobuf then you must pass the same lock to the videobuf +queue initialize function: if videobuf has to wait for a frame to arrive, then +it will temporarily unlock the lock and relock it afterwards. If your driver +also waits in the code, then you should do the same to allow other processes +to access the device node while the first process is waiting for something. + +The implementation of a hotplug disconnect should also take the lock before +calling v4l2_device_disconnect. video_device registration ------------------------- @@ -483,7 +508,6 @@ types exist: VFL_TYPE_GRABBER: videoX for video input/output devices VFL_TYPE_VBI: vbiX for vertical blank data (i.e. closed captions, teletext) VFL_TYPE_RADIO: radioX for radio tuners -VFL_TYPE_VTX: vtxX for teletext devices (deprecated, don't use) The last argument gives you a certain amount of control over the device device node number used (i.e. the X in videoX). Normally you will pass -1 @@ -547,9 +571,8 @@ from /dev). After video_unregister_device() returns no new opens can be done. However, in the case of USB devices some application might still have one of these -device nodes open. So after the unregister all file operations will return -an error as well, except for the ioctl and unlocked_ioctl file operations: -those will still be passed on since some buffer ioctls may still be needed. +device nodes open. So after the unregister all file operations (except +release, of course) will return an error as well. When the last user of the video device node exits, then the vdev->release() callback is called and you can do the final cleanup there. |