1 files changed, 81 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
new file mode 100644
index 0000000..4ad29b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/powerpc/fsl/raideng.txt
@@ -0,0 +1,81 @@
+* Freescale 85xx RAID Engine nodes
+
+RAID Engine nodes are defined to describe on-chip RAID accelerators.  Each RAID
+Engine should have a separate node.
+
+Supported chips:
+P5020, P5040
+
+Required properties:
+
+- compatible:	Should contain "fsl,raideng-v1.0" as the value
+		This identifies RAID Engine block. 1 in 1.0 represents
+		major number whereas 0 represents minor number. The
+		version matches the hardware IP version.
+- reg:		offset and length of the register set for the device
+- ranges:	standard ranges property specifying the translation
+		between child address space and parent address space
+
+Example:
+	/* P5020 */
+	raideng: raideng@320000 {
+		compatible = "fsl,raideng-v1.0";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg	= <0x320000 0x10000>;
+		ranges	= <0 0x320000 0x10000>;
+	};
+
+
+There must be a sub-node for each job queue present in RAID Engine
+This node must be a sub-node of the main RAID Engine node
+
+- compatible:	Should contain "fsl,raideng-v1.0-job-queue" as the value
+		This identifies the job queue interface
+- reg:		offset and length of the register set for job queue
+- ranges:	standard ranges property specifying the translation
+		between child address space and parent address space
+
+Example:
+	/* P5020 */
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		reg	   = <0x1000 0x1000>;
+		ranges	   = <0x0 0x1000 0x1000>;
+	};
+
+
+There must be a sub-node for each job ring present in RAID Engine
+This node must be a sub-node of job queue node
+
+- compatible:	Must contain "fsl,raideng-v1.0-job-ring" as the value
+		This identifies job ring. Should contain either
+		"fsl,raideng-v1.0-hp-ring" or "fsl,raideng-v1.0-lp-ring"
+		depending upon whether ring has high or low priority
+- reg:		offset and length of the register set for job ring
+- interrupts:	interrupt mapping for job ring IRQ
+
+Optional property:
+
+- fsl,liodn:	Specifies the LIODN to be used for Job Ring. This
+		property is normally set by firmware. Value
+		is of 12-bits which is the LIODN number for this JR.
+		This property is used by the IOMMU (PAMU) to distinquish
+		transactions from this JR and than be able to do address
+		translation & protection accordingly.
+
+Example:
+	/* P5020 */
+	raideng_jq0@1000 {
+		compatible = "fsl,raideng-v1.0-job-queue";
+		reg	   = <0x1000 0x1000>;
+		ranges	   = <0x0 0x1000 0x1000>;
+
+		raideng_jr0: jr@0 {
+			compatible = "fsl,raideng-v1.0-job-ring", "fsl,raideng-v1.0-hp-ring";
+			reg	   = <0x0 0x400>;
+			interrupts = <139 2 0 0>;
+			interrupt-parent = <&mpic>;
+			fsl,liodn = <0x41>;
+		};
+	};