diff options
Diffstat (limited to 'Documentation')
7 files changed, 161 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index bfbc771..ac9e751 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -1,6 +1,14 @@ Freescale i.MX Platforms Device Tree Bindings ----------------------------------------------- +i.MX23 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx23-evk", "fsl,imx23"; + +i.MX28 Evaluation Kit +Required root node properties: + - compatible = "fsl,imx28-evk", "fsl,imx28"; + i.MX51 Babbage Board Required root node properties: - compatible = "fsl,imx51-babbage", "fsl,imx51"; @@ -29,6 +37,10 @@ i.MX6 Quad SABRE Lite Board Required root node properties: - compatible = "fsl,imx6q-sabrelite", "fsl,imx6q"; +i.MX6 Quad SABRE Smart Device Board +Required root node properties: + - compatible = "fsl,imx6q-sabresd", "fsl,imx6q"; + Generic i.MX boards ------------------- diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt new file mode 100644 index 0000000..ded0398 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt @@ -0,0 +1,19 @@ +* Freescale MXS DMA + +Required properties: +- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx" +- reg : Should contain registers location and length + +Supported chips: +imx23, imx28. + +Examples: +dma-apbh@80004000 { + compatible = "fsl,imx28-dma-apbh"; + reg = <0x80004000 2000>; +}; + +dma-apbx@80024000 { + compatible = "fsl,imx28-dma-apbx"; + reg = <0x80024000 2000>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt new file mode 100644 index 0000000..0c35673 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt @@ -0,0 +1,87 @@ +* Freescale MXS GPIO controller + +The Freescale MXS GPIO controller is part of MXS PIN controller. The +GPIOs are organized in port/bank. Each port consists of 32 GPIOs. + +As the GPIO controller is embedded in the PIN controller and all the +GPIO ports share the same IO space with PIN controller, the GPIO node +will be represented as sub-nodes of MXS pinctrl node. + +Required properties for GPIO node: +- compatible : Should be "fsl,<soc>-gpio". The supported SoCs include + imx23 and imx28. +- interrupts : Should be the port interrupt shared by all 32 pins. +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify optional parameters (currently + unused). +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. The first cell is the GPIO number. + The second cell bits[3:0] is used to specify trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +Note: Each GPIO port should have an alias correctly numbered in "aliases" +node. + +Examples: + +aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; +}; + +pinctrl@80018000 { + compatible = "fsl,imx28-pinctrl", "simple-bus"; + reg = <0x80018000 2000>; + + gpio0: gpio@0 { + compatible = "fsl,imx28-gpio"; + interrupts = <127>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@1 { + compatible = "fsl,imx28-gpio"; + interrupts = <126>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2 { + compatible = "fsl,imx28-gpio"; + interrupts = <125>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@3 { + compatible = "fsl,imx28-gpio"; + interrupts = <124>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@4 { + compatible = "fsl,imx28-gpio"; + interrupts = <123>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt new file mode 100644 index 0000000..1bfc02d --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -0,0 +1,16 @@ +* Freescale MXS Inter IC (I2C) Controller + +Required properties: +- compatible: Should be "fsl,<chip>-i2c" +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts + +Examples: + +i2c0: i2c@80058000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-i2c"; + reg = <0x80058000 2000>; + interrupts = <111 68>; +}; diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt new file mode 100644 index 0000000..14d870a --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -0,0 +1,25 @@ +* Freescale MXS MMC controller + +The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +Required properties: +- compatible: Should be "fsl,<chip>-mmc". The supported chips include + imx23 and imx28. +- reg: Should contain registers location and length +- interrupts: Should contain ERROR and DMA interrupts +- fsl,ssp-dma-channel: APBH DMA channel for the SSP +- bus-width: Number of data lines, can be <1>, <4>, or <8> + +Optional properties: +- wp-gpios: Specify GPIOs for write protection + +Examples: + +ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + reg = <0x80010000 2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; + bus-width = <8>; +}; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index de43951..7ab9e1a 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -14,7 +14,7 @@ Optional properties: Example: -fec@83fec000 { +ethernet@83fec000 { compatible = "fsl,imx51-fec", "fsl,imx27-fec"; reg = <0x83fec000 0x4000>; interrupts = <87>; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt index a9c0406..b462d0c 100644 --- a/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/tty/serial/fsl-imx-uart.txt @@ -11,7 +11,7 @@ Optional properties: Example: -uart@73fbc000 { +serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; interrupts = <31>; |