diff options
Diffstat (limited to 'Documentation')
39 files changed, 62 insertions, 62 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt index cb82a7f..295d971 100644 --- a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt +++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt @@ -80,7 +80,7 @@ RTC Watchdog -------- - The watchdog harware is the same as the S3C2410, and is supported by + The watchdog hardware is the same as the S3C2410, and is supported by the s3c2410_wdt driver. diff --git a/Documentation/block/deadline-iosched.txt b/Documentation/block/deadline-iosched.txt index 672c06b..be08ffd 100644 --- a/Documentation/block/deadline-iosched.txt +++ b/Documentation/block/deadline-iosched.txt @@ -27,7 +27,7 @@ The goal of the deadline io scheduler is to attempt to guarantee a start service time for a request. As we focus mainly on read latencies, this is tunable. When a read request first enters the io scheduler, it is assigned a deadline that is the current time + the read_expire value in units of -miliseconds. +milliseconds. write_expire (in ms) diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index f40589c..e6d7010 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -57,7 +57,7 @@ selected for each specific use. Basically, it's the following flow graph: -CPU can be set to switch independetly | CPU can only be set +CPU can be set to switch independently | CPU can only be set within specific "limits" | to specific frequencies "CPUfreq policy" diff --git a/Documentation/dell_rbu.txt b/Documentation/dell_rbu.txt index 6ddf9fc..b95ee6f 100644 --- a/Documentation/dell_rbu.txt +++ b/Documentation/dell_rbu.txt @@ -16,8 +16,8 @@ OpenManage and Dell Update packages (DUP). Libsmbios can also be used to update BIOS on Dell systems go to http://linux.dell.com/libsmbios/ for details. -Dell_RBU driver supports BIOS update using the monilothic image and packetized -image methods. In case of moniolithic the driver allocates a contiguous chunk +Dell_RBU driver supports BIOS update using the monolithic image and packetized +image methods. In case of monolithic the driver allocates a contiguous chunk of physical pages having the BIOS image. In case of packetized the app using the driver breaks the image in to packets of fixed sizes and the driver would place each packet in contiguous physical memory. The driver also diff --git a/Documentation/driver-model/class.txt b/Documentation/driver-model/class.txt index 2d1d893..548505f 100644 --- a/Documentation/driver-model/class.txt +++ b/Documentation/driver-model/class.txt @@ -12,7 +12,7 @@ device. The following device classes have been identified: Each device class defines a set of semantics and a programming interface that devices of that class adhere to. Device drivers are the -implemention of that programming interface for a particular device on +implementation of that programming interface for a particular device on a particular bus. Device classes are agnostic with respect to what bus a device resides diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt index 95f0e73..531239b 100644 --- a/Documentation/dvb/ci.txt +++ b/Documentation/dvb/ci.txt @@ -32,7 +32,7 @@ This application requires the following to function properly as of now. descrambler to function, eg: $ ca_zap channels.conf "TMC" - (d) Hopeflly Enjoy your favourite subscribed channel as you do with + (d) Hopefully enjoy your favourite subscribed channel as you do with a FTA card. (3) Currently ca_zap, and dst_test, both are meant for demonstration @@ -65,7 +65,7 @@ Modules that have been tested by this driver at present are ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ With the High Level CI approach any new card with almost any random architecture can be implemented with this style, the definitions -insidethe switch statement can be easily adapted for any card, thereby +inside the switch statement can be easily adapted for any card, thereby eliminating the need for any additional ioctls. The disadvantage is that the driver/hardware has to manage the rest. For diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index 9175f44..35f105b 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -13,7 +13,7 @@ Table of contents - Using NTFS volume and stripe sets - The Device-Mapper driver - The Software RAID / MD driver - - Limitiations when using the MD driver + - Limitations when using the MD driver - ChangeLog @@ -43,7 +43,7 @@ There is plenty of additional information on the linux-ntfs web site at http://linux-ntfs.sourceforge.net/ The web site has a lot of additional information, such as a comprehensive -FAQ, documentation on the NTFS on-disk format, informaiton on the Linux-NTFS +FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS userspace utilities, etc. @@ -383,7 +383,7 @@ Software RAID / MD driver. For which you need to set up your /etc/raidtab appropriately (see man 5 raidtab). Linear volume sets, i.e. linear raid, as well as stripe sets, i.e. raid level -0, have been tested and work fine (though see section "Limitiations when using +0, have been tested and work fine (though see section "Limitations when using the MD driver with NTFS volumes" especially if you want to use linear raid). Even though untested, there is no reason why mirrors, i.e. raid level 1, and stripes with parity, i.e. raid level 5, should not work, too. @@ -435,7 +435,7 @@ setup correctly to avoid the possibility of causing damage to the data on the ntfs volume. -Limitiations when using the Software RAID / MD driver +Limitations when using the Software RAID / MD driver ----------------------------------------------------- Using the md driver will not work properly if any of your NTFS partitions have diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 8410618..8d6590d 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1588,7 +1588,7 @@ Enable the strict RFC793 interpretation of the TCP urgent pointer field. The default is to use the BSD compatible interpretation of the urgent pointer pointing to the first byte after the urgent data. The RFC793 interpretation is to have it point to the last byte of urgent data. Enabling this option may -lead to interoperatibility problems. Disabled by default. +lead to interoperability problems. Disabled by default. tcp_syncookies -------------- diff --git a/Documentation/input/atarikbd.txt b/Documentation/input/atarikbd.txt index 3feb9f2..7171fbf 100644 --- a/Documentation/input/atarikbd.txt +++ b/Documentation/input/atarikbd.txt @@ -406,7 +406,7 @@ INTERROGATION MODE. 9.18 SET JOYSTICK MONITORING 0x17 - rate ; time between samples in hundreths of a second + rate ; time between samples in hundredths of a second Returns: (in packets of two as long as in mode) %000000xy ; where y is JOYSTICK1 Fire button ; and x is JOYSTICK0 Fire button diff --git a/Documentation/input/gameport-programming.txt b/Documentation/input/gameport-programming.txt index 1ba3d32..14e0a8b 100644 --- a/Documentation/input/gameport-programming.txt +++ b/Documentation/input/gameport-programming.txt @@ -18,8 +18,8 @@ Make sure struct gameport is initialized to 0 in all other fields. The gameport generic code will take care of the rest. If your hardware supports more than one io address, and your driver can -choose which one program the hardware to, starting from the more exotic -addresses is preferred, because the likelyhood of clashing with the standard +choose which one to program the hardware to, starting from the more exotic +addresses is preferred, because the likelihood of clashing with the standard 0x201 address is smaller. Eg. if your driver supports addresses 0x200, 0x208, 0x210 and 0x218, then diff --git a/Documentation/input/input.txt b/Documentation/input/input.txt index a8aa848..fabb823 100644 --- a/Documentation/input/input.txt +++ b/Documentation/input/input.txt @@ -279,7 +279,7 @@ struct input_event { }; 'time' is the timestamp, it returns the time at which the event happened. -Type is for example EV_REL for relative momement, REL_KEY for a keypress or +Type is for example EV_REL for relative moment, REL_KEY for a keypress or release. More types are defined in include/linux/input.h. 'code' is event code, for example REL_X or KEY_BACKSPACE, again a complete diff --git a/Documentation/keys.txt b/Documentation/keys.txt index 5745090..693ef0c 100644 --- a/Documentation/keys.txt +++ b/Documentation/keys.txt @@ -715,7 +715,7 @@ The keyctl syscall functions are: KERNEL SERVICES =============== -The kernel services for key managment are fairly simple to deal with. They can +The kernel services for key management are fairly simple to deal with. They can be broken down into two areas: keys and key types. Dealing with keys is fairly straightforward. Firstly, the kernel service diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt index 7f2bb8e..2a76a4a 100644 --- a/Documentation/lockdep-design.txt +++ b/Documentation/lockdep-design.txt @@ -133,7 +133,7 @@ cases there is an inherent "natural" ordering between the two objects (defined by the properties of the hierarchy), and the kernel grabs the locks in this fixed order on each of the objects. -An example of such an object hieararchy that results in "nested locking" +An example of such an object hierarchy that results in "nested locking" is that of a "whole disk" block-dev object and a "partition" block-dev object; the partition is "part of" the whole device and as long as one always takes the whole disk lock as a higher lock than the partition @@ -162,7 +162,7 @@ The validator treats a lock that is taken in such a nested fashion as a separate (sub)class for the purposes of validation. Note: When changing code to use the _nested() primitives, be careful and -check really thoroughly that the hiearchy is correctly mapped; otherwise +check really thoroughly that the hierarchy is correctly mapped; otherwise you can get false positives or false negatives. Proof of 100% correctness: diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/cs89x0.txt index 188beb7..0371ced 100644 --- a/Documentation/networking/cs89x0.txt +++ b/Documentation/networking/cs89x0.txt @@ -227,7 +227,7 @@ configuration options are available on the command line: * media=rj45 - specify media type or media=bnc or media=aui - or medai=auto + or media=auto * duplex=full - specify forced half/full/autonegotiate duplex or duplex=half or duplex=auto diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 935e298..912e249 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -787,7 +787,7 @@ accept_ra_defrtr - BOOLEAN disabled if accept_ra is disabled. accept_ra_pinfo - BOOLEAN - Learn Prefix Inforamtion in Router Advertisement. + Learn Prefix Information in Router Advertisement. Functional default: enabled if accept_ra is enabled. disabled if accept_ra is disabled. diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index d1c5a48..a87d4a8 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -215,8 +215,8 @@ called pg_vec, its size limits the number of blocks that can be allocated. block #1 -kmalloc allocates any number of bytes of phisically contiguous memory from -a pool of pre-determined sizes. This pool of memory is mantained by the slab +kmalloc allocates any number of bytes of physically contiguous memory from +a pool of pre-determined sizes. This pool of memory is maintained by the slab allocator which is at the end the responsible for doing the allocation and hence which imposes the maximum memory that kmalloc can allocate. diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index 287b622..c8eee23 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -18,7 +18,7 @@ root 129 0.3 0.0 0 0 ? SW 2003 523:20 [pktgen/0] root 130 0.3 0.0 0 0 ? SW 2003 509:50 [pktgen/1] -For montoring and control pktgen creates: +For monitoring and control pktgen creates: /proc/net/pktgen/pgctrl /proc/net/pktgen/kpktgend_X /proc/net/pktgen/ethX diff --git a/Documentation/networking/sk98lin.txt b/Documentation/networking/sk98lin.txt index 7837c53..b8bc7dd 100644 --- a/Documentation/networking/sk98lin.txt +++ b/Documentation/networking/sk98lin.txt @@ -320,7 +320,7 @@ Parameter: Moderation Values: None, Static, Dynamic Default: None -Interrupt moderation is employed to limit the maxmimum number of interrupts +Interrupt moderation is employed to limit the maximum number of interrupts the driver has to serve. That is, one or more interrupts (which indicate any transmit or receive packet to be processed) are queued until the driver processes them. When queued interrupts are to be served, is determined by the diff --git a/Documentation/networking/wan-router.txt b/Documentation/networking/wan-router.txt index 3e549fc..37e42fe 100644 --- a/Documentation/networking/wan-router.txt +++ b/Documentation/networking/wan-router.txt @@ -148,7 +148,7 @@ NEW IN THIS RELEASE for async connections. o Added the PPPCONFIG utility - Used to configure the PPPD dameon for the + Used to configure the PPPD daemon for the WANPIPE Async PPP and standard serial port. The wancfg calls the pppconfig to configure the pppd. @@ -350,7 +350,7 @@ REVISION HISTORY Available as a patch. 2.0.6 Aug 17, 1999 Increased debugging in statup scripts - Fixed insallation bugs from 2.0.5 + Fixed installation bugs from 2.0.5 Kernel patch works for both 2.2.10 and 2.2.11 kernels. There is no functional difference between the two packages @@ -434,7 +434,7 @@ beta3-2.1.4 Jul 2000 o X25 M_BIT Problem fix. change. beta1-2.1.5 Nov 15 2000 - o Fixed the MulitPort PPP Support for kernels 2.2.16 and above. + o Fixed the MultiPort PPP Support for kernels 2.2.16 and above. 2.2.X kernels only o Secured the driver UDP debugging calls diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index 823b2cf..a99c176 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -175,8 +175,8 @@ reliable. Q: I do not understand why you have such strong objections to idea of selective suspend. -A: Do selective suspend during runtime power managment, that's okay. But -its useless for suspend-to-disk. (And I do not see how you could use +A: Do selective suspend during runtime power management, that's okay. But +it's useless for suspend-to-disk. (And I do not see how you could use it for suspend-to-ram, I hope you do not want that). Lets see, so you suggest to @@ -211,7 +211,7 @@ slowness may not matter to you. It can always be fixed later. For devices like disk it does matter, you do not want to spindown for FREEZE. -Q: After resuming, system is paging heavilly, leading to very bad interactivity. +Q: After resuming, system is paging heavily, leading to very bad interactivity. A: Try running diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index 042c0cf..09a5d43 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -145,7 +145,7 @@ it with special cases. in case you are entering the kernel with MMU enabled and a non-1:1 mapping. - r5 : NULL (as to differenciate with method a) + r5 : NULL (as to differentiate with method a) Note about SMP entry: Either your firmware puts your other CPUs in some sleep loop or spin loop in ROM where you can get @@ -418,9 +418,9 @@ zero terminated string and is mandatory for version 1 to 3 of the format definition (as it is in Open Firmware). Version 0x10 makes it optional as it can generate it from the unit name defined below. -There is also a "unit name" that is used to differenciate nodes with +There is also a "unit name" that is used to differentiate nodes with the same name at the same level, it is usually made of the node -name's, the "@" sign, and a "unit address", which definition is +names, the "@" sign, and a "unit address", which definition is specific to the bus type the node sits on. The unit name doesn't exist as a property per-se but is included in diff --git a/Documentation/rpc-cache.txt b/Documentation/rpc-cache.txt index 5f757c8..21fb09c 100644 --- a/Documentation/rpc-cache.txt +++ b/Documentation/rpc-cache.txt @@ -24,7 +24,7 @@ The common code handles such things as: - general cache lookup with correct locking - supporting 'NEGATIVE' as well as positive entries - allowing an EXPIRED time on cache items, and removing - items after they expire, and are no longe in-use. + items after they expire, and are no longer in-use. - making requests to user-space to fill in cache entries - allowing user-space to directly set entries in the cache - delaying RPC requests that depend on as-yet incomplete diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index 248953a..e506e8d 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -912,8 +912,8 @@ If you wanted to know does ping work but didn't have the source strace ping -c 1 127.0.0.1 & then look at the man pages for each of the syscalls below, ( In fact this is sometimes easier than looking at some spagetti -source which conditionally compiles for several architectures ) -Not everything that it throws out needs to make sense immeadiately +source which conditionally compiles for several architectures ). +Not everything that it throws out needs to make sense immediately. Just looking quickly you can see that it is making up a RAW socket for the ICMP protocol. @@ -2315,7 +2315,7 @@ Showing us the shared libraries init uses where they are in memory /proc/1/mem is the current running processes memory which you can read & write to like a file. strace uses this sometimes as it is a bit faster than the -rather inefficent ptrace interface for peeking at DATA. +rather inefficient ptrace interface for peeking at DATA. cat status @@ -2445,7 +2445,7 @@ displays the following lines as it executes them. + RELSTATUS=release + MACHTYPE=i586-pc-linux-gnu -perl -d <scriptname> runs the perlscript in a fully intercative debugger +perl -d <scriptname> runs the perlscript in a fully interactive debugger <like gdb>. Type 'h' in the debugger for help. diff --git a/Documentation/s390/cds.txt b/Documentation/s390/cds.txt index 3746b6d..59a5616 100644 --- a/Documentation/s390/cds.txt +++ b/Documentation/s390/cds.txt @@ -325,7 +325,7 @@ with the following CCW flags values defined : CCW_FLAG_DC - data chaining CCW_FLAG_CC - command chaining -CCW_FLAG_SLI - suppress incorrct length +CCW_FLAG_SLI - suppress incorrect length CCW_FLAG_SKIP - skip CCW_FLAG_PCI - PCI CCW_FLAG_IDA - indirect addressing diff --git a/Documentation/sched-coding.txt b/Documentation/sched-coding.txt index 2b75ef67..cbd8db7 100644 --- a/Documentation/sched-coding.txt +++ b/Documentation/sched-coding.txt @@ -15,7 +15,7 @@ Main Scheduling Methods void load_balance(runqueue_t *this_rq, int idle) Attempts to pull tasks from one cpu to another to balance cpu usage, if needed. This method is called explicitly if the runqueues are - inbalanced or periodically by the timer tick. Prior to calling, + imbalanced or periodically by the timer tick. Prior to calling, the current runqueue must be locked and interrupts disabled. void schedule() diff --git a/Documentation/sched-design.txt b/Documentation/sched-design.txt index 9d04e7b..1605bf0 100644 --- a/Documentation/sched-design.txt +++ b/Documentation/sched-design.txt @@ -93,9 +93,9 @@ and the goal is also to add a few new things: Design ====== -the core of the new scheduler are the following mechanizms: +The core of the new scheduler contains the following mechanisms: - - *two*, priority-ordered 'priority arrays' per CPU. There is an 'active' + - *two* priority-ordered 'priority arrays' per CPU. There is an 'active' array and an 'expired' array. The active array contains all tasks that are affine to this CPU and have timeslices left. The expired array contains all tasks which have used up their timeslices - but this array diff --git a/Documentation/scsi/NinjaSCSI.txt b/Documentation/scsi/NinjaSCSI.txt index 041780f..17dd547 100644 --- a/Documentation/scsi/NinjaSCSI.txt +++ b/Documentation/scsi/NinjaSCSI.txt @@ -24,7 +24,7 @@ SCSI device: I-O data CDPS-PX24 (CD-ROM drive) You can also use "cardctl" program (this program is in pcmcia-cs source code) to get more info. -# cat /var/log/messgaes +# cat /var/log/messages ... Jan 2 03:45:06 lindberg cardmgr[78]: unsupported card in socket 1 Jan 2 03:45:06 lindberg cardmgr[78]: product info: "WBT", "NinjaSCSI-3", "R1.0" diff --git a/Documentation/scsi/ibmmca.txt b/Documentation/scsi/ibmmca.txt index d16ce5b..a783635 100644 --- a/Documentation/scsi/ibmmca.txt +++ b/Documentation/scsi/ibmmca.txt @@ -229,7 +229,7 @@ In a second step of the driver development, the following improvement has been applied: The first approach limited the number of devices to 7, far - fewer than the 15 that it could usem then it just maped ldn -> + fewer than the 15 that it could use, then it just mapped ldn -> (ldn/8,ldn%8) for pun,lun. We ended up with a real mishmash of puns and luns, but it all seemed to work. @@ -254,12 +254,12 @@ device to be existant, but it has no ldn assigned, it gets a ldn out of 7 to 14. The numbers are assigned in cyclic order. Therefore it takes 8 dynamical reassignments on the SCSI-devices, until a certain device - loses its ldn again. This assures, that dynamical remapping is avoided + loses its ldn again. This assures that dynamical remapping is avoided during intense I/O between up to 15 SCSI-devices (means pun,lun - combinations). A further advantage of this method is, that people who + combinations). A further advantage of this method is that people who build their kernel without probing on all luns will get what they expect, because the driver just won't assign everything with lun>0 when - multpile lun probing is inactive. + multiple lun probing is inactive. 2.4 SCSI-Device Order --------------------- @@ -1104,7 +1104,7 @@ The parameter 'normal' sets the new industry standard, starting from pun 0, scanning up to pun 6. This allows you to change your opinion still after having already compiled the kernel. - Q: Why I cannot find the IBM MCA SCSI support in the config menue? + Q: Why can't I find IBM MCA SCSI support in the config menu? A: You have to activate MCA bus support, first. Q: Where can I find the latest info about this driver? A: See the file MAINTAINERS for the current WWW-address, which offers diff --git a/Documentation/scsi/megaraid.txt b/Documentation/scsi/megaraid.txt index ff864c0..3c7cea5 100644 --- a/Documentation/scsi/megaraid.txt +++ b/Documentation/scsi/megaraid.txt @@ -4,11 +4,11 @@ Overview: -------- -Different classes of controllers from LSI Logic, accept and respond to the +Different classes of controllers from LSI Logic accept and respond to the user applications in a similar way. They understand the same firmware control commands. Furthermore, the applications also can treat different classes of the controllers uniformly. Hence it is logical to have a single module that -interefaces with the applications on one side and all the low level drivers +interfaces with the applications on one side and all the low level drivers on the other. The advantages, though obvious, are listed for completeness: diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index e80a02c..29cbbb6 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -778,7 +778,7 @@ port address 0x1400. Some scsi boards use a 875 (ultra wide) and only supply narrow connectors. If you have connected a wide device with a 50 pins to 68 pins cable converter, any accepted wide negotiation will break further data transfers. - In such a case, using "wide:0" in the bootup command will be helpfull. + In such a case, using "wide:0" in the bootup command will be helpful. 10.2.14 Differential mode diff:0 never set up diff mode diff --git a/Documentation/scsi/scsi_eh.txt b/Documentation/scsi/scsi_eh.txt index 8d6253f..b964eef 100644 --- a/Documentation/scsi/scsi_eh.txt +++ b/Documentation/scsi/scsi_eh.txt @@ -194,7 +194,7 @@ lower layers and lower layers are ready to process or fail the scmd again. To achieve these goals, EH performs recovery actions with increasing -severity. Some actions are performed by issueing SCSI commands and +severity. Some actions are performed by issuing SCSI commands and others are performed by invoking one of the following fine-grained hostt EH callbacks. Callbacks may be omitted and omitted ones are considered to fail always. diff --git a/Documentation/scsi/sym53c8xx_2.txt b/Documentation/scsi/sym53c8xx_2.txt index 7f516cd..98d5f1e 100644 --- a/Documentation/scsi/sym53c8xx_2.txt +++ b/Documentation/scsi/sym53c8xx_2.txt @@ -684,7 +684,7 @@ Field H : SCNTL3 Scsi Control Register 3 Contains the setting of timing values for both asynchronous and synchronous data transfers. Field I : SCNTL4 Scsi Control Register 4 - Only meaninful for 53C1010 Ultra3 controllers. + Only meaningful for 53C1010 Ultra3 controllers. Understanding Fields J, K, L and dumps requires to have good knowledge of SCSI standards, chip cores functionnals and internal driver data structures. diff --git a/Documentation/sh/kgdb.txt b/Documentation/sh/kgdb.txt index 5b04f7f..05b4ba8 100644 --- a/Documentation/sh/kgdb.txt +++ b/Documentation/sh/kgdb.txt @@ -69,7 +69,7 @@ might specify the halt option: kgdb=halt -Boot the TARGET machinem, which will appear to hang. +Boot the TARGET machine, which will appear to hang. On your DEVELOPMENT machine, cd to the source directory and run the gdb program. (This is likely to be a cross GDB which runs on your host but diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 4fbf8d5..138673a 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1882,7 +1882,7 @@ options snd-ens1371 index=1 # OSS/Free portion alias sound-slot-0 snd-interwave alias sound-slot-1 snd-ens1371 ------ /etc/moprobe.conf +----- /etc/modprobe.conf In this example, the interwave card is always loaded as the first card (index 0) and ens1371 as the second (index 1). diff --git a/Documentation/usb/mtouchusb.txt b/Documentation/usb/mtouchusb.txt index 4332088..9edf235 100644 --- a/Documentation/usb/mtouchusb.txt +++ b/Documentation/usb/mtouchusb.txt @@ -38,7 +38,7 @@ This driver appears to be one of possible 2 Linux USB Input Touchscreen drivers. Although 3M produces a binary only driver available for download, I persist in updating this driver since I would like to use the touchscreen for embedded apps using QTEmbedded, DirectFB, etc. So I feel the -logical choice is to use Linux Imput. +logical choice is to use Linux Input. Currently there is no way to calibrate the device via this driver. Even if the device could be calibrated, the driver pulls to raw coordinate data from diff --git a/Documentation/video4linux/cx2341x/fw-osd-api.txt b/Documentation/video4linux/cx2341x/fw-osd-api.txt index da98ae3..0a602f3 100644 --- a/Documentation/video4linux/cx2341x/fw-osd-api.txt +++ b/Documentation/video4linux/cx2341x/fw-osd-api.txt @@ -97,7 +97,7 @@ Result[0] Result[1] top left vertical offset Result[2] - bottom right hotizontal offset + bottom right horizontal offset Result[3] bottom right vertical offset diff --git a/Documentation/video4linux/et61x251.txt b/Documentation/video4linux/et61x251.txt index cd584f2..b65aa0f 100644 --- a/Documentation/video4linux/et61x251.txt +++ b/Documentation/video4linux/et61x251.txt @@ -80,7 +80,7 @@ Some of the features of the driver are: high compression quality (see also "Notes for V4L2 application developers" paragraph); - full support for the capabilities of every possible image sensors that can - be connected to the ET61X[12]51 bridges, including, for istance, red, green, + be connected to the ET61X[12]51 bridges, including, for instance, red, green, blue and global gain adjustments and exposure control (see "Supported devices" paragraph for details); - use of default color settings for sunlight conditions; diff --git a/Documentation/video4linux/sn9c102.txt b/Documentation/video4linux/sn9c102.txt index b737a86..8cda472 100644 --- a/Documentation/video4linux/sn9c102.txt +++ b/Documentation/video4linux/sn9c102.txt @@ -85,7 +85,7 @@ Some of the features of the driver are: high compression quality (see also "Notes for V4L2 application developers" and "Video frame formats" paragraphs); - full support for the capabilities of many of the possible image sensors that - can be connected to the SN9C10x bridges, including, for istance, red, green, + can be connected to the SN9C10x bridges, including, for instance, red, green, blue and global gain adjustments and exposure (see "Supported devices" paragraph for details); - use of default color settings for sunlight conditions; diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt index 12ad3b8..b705a02 100644 --- a/Documentation/watchdog/watchdog-api.txt +++ b/Documentation/watchdog/watchdog-api.txt @@ -45,7 +45,7 @@ daemon and it crashes the system will not reboot. Because of this, some of the drivers support the configuration option "Disable watchdog shutdown on close", CONFIG_WATCHDOG_NOWAYOUT. If it is set to Y when compiling the kernel, there is no way of disabling the watchdog once -it has been started. So, if the watchdog dameon crashes, the system +it has been started. So, if the watchdog daemon crashes, the system will reboot after the timeout has passed. Some other drivers will not disable the watchdog, unless a specific |
