diff options
Diffstat (limited to 'Documentation')
33 files changed, 662 insertions, 269 deletions
diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 8d55670..30b327a 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -109,6 +109,8 @@ cpu-hotplug.txt - document describing CPU hotplug support in the Linux kernel. cpu-load.txt - document describing how CPU load statistics are collected. +cpuidle/ + - info on CPU_IDLE, CPU idle state management subsystem. cpusets.txt - documents the cpusets feature; assign CPUs and Mem to a set of tasks. cputopology.txt diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 6a0ad47..300e170 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -8,7 +8,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \ kernel-hacking.xml kernel-locking.xml deviceiobook.xml \ - procfs-guide.xml writing_usb_driver.xml \ + procfs-guide.xml writing_usb_driver.xml networking.xml \ kernel-api.xml filesystems.xml lsm.xml usb.xml \ gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml diff --git a/Documentation/DocBook/filesystems.tmpl b/Documentation/DocBook/filesystems.tmpl index 5eaef87..5e87ad5 100644 --- a/Documentation/DocBook/filesystems.tmpl +++ b/Documentation/DocBook/filesystems.tmpl @@ -398,4 +398,24 @@ an example. </chapter> + <chapter id="splice"> + <title>splice API</title> + <para> + splice is a method for moving blocks of data around inside the + kernel, without continually transferring them between the kernel + and user space. + </para> +!Ffs/splice.c + </chapter> + + <chapter id="pipes"> + <title>pipes API</title> + <para> + Pipe interfaces are all for in-kernel (builtin image) use. + They are not exported for use by modules. + </para> +!Iinclude/linux/pipe_fs_i.h +!Ffs/pipe.c + </chapter> + </book> diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl index 059aaf2..f31601e 100644 --- a/Documentation/DocBook/kernel-api.tmpl +++ b/Documentation/DocBook/kernel-api.tmpl @@ -204,65 +204,6 @@ X!Ilib/string.c </sect1> </chapter> - <chapter id="netcore"> - <title>Linux Networking</title> - <sect1><title>Networking Base Types</title> -!Iinclude/linux/net.h - </sect1> - <sect1><title>Socket Buffer Functions</title> -!Iinclude/linux/skbuff.h -!Iinclude/net/sock.h -!Enet/socket.c -!Enet/core/skbuff.c -!Enet/core/sock.c -!Enet/core/datagram.c -!Enet/core/stream.c - </sect1> - <sect1><title>Socket Filter</title> -!Enet/core/filter.c - </sect1> - <sect1><title>Generic Network Statistics</title> -!Iinclude/linux/gen_stats.h -!Enet/core/gen_stats.c -!Enet/core/gen_estimator.c - </sect1> - <sect1><title>SUN RPC subsystem</title> -<!-- The !D functionality is not perfect, garbage has to be protected by comments -!Dnet/sunrpc/sunrpc_syms.c ---> -!Enet/sunrpc/xdr.c -!Enet/sunrpc/svcsock.c -!Enet/sunrpc/sched.c - </sect1> - </chapter> - - <chapter id="netdev"> - <title>Network device support</title> - <sect1><title>Driver Support</title> -!Enet/core/dev.c -!Enet/ethernet/eth.c -!Enet/sched/sch_generic.c -!Iinclude/linux/etherdevice.h -!Iinclude/linux/netdevice.h - </sect1> - <sect1><title>PHY Support</title> -!Edrivers/net/phy/phy.c -!Idrivers/net/phy/phy.c -!Edrivers/net/phy/phy_device.c -!Idrivers/net/phy/phy_device.c -!Edrivers/net/phy/mdio_bus.c -!Idrivers/net/phy/mdio_bus.c - </sect1> -<!-- FIXME: Removed for now since no structured comments in source - <sect1><title>Wireless</title> -X!Enet/core/wireless.c - </sect1> ---> - <sect1><title>Synchronous PPP</title> -!Edrivers/net/wan/syncppp.c - </sect1> - </chapter> - <chapter id="modload"> <title>Module Support</title> <sect1><title>Module Loading</title> @@ -508,11 +449,6 @@ X!Isound/sound_firmware.c !Edrivers/serial/8250.c </chapter> - <chapter id="z85230"> - <title>Z85230 Support Library</title> -!Edrivers/net/wan/z85230.c - </chapter> - <chapter id="fbdev"> <title>Frame Buffer Library</title> @@ -712,24 +648,4 @@ X!Idrivers/video/console/fonts.c !Edrivers/i2c/i2c-core.c </chapter> - <chapter id="splice"> - <title>splice API</title> - <para> - splice is a method for moving blocks of data around inside the - kernel, without continually transferring them between the kernel - and user space. - </para> -!Ffs/splice.c - </chapter> - - <chapter id="pipes"> - <title>pipes API</title> - <para> - Pipe interfaces are all for in-kernel (builtin image) use. - They are not exported for use by modules. - </para> -!Iinclude/linux/pipe_fs_i.h -!Ffs/pipe.c - </chapter> - </book> diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl new file mode 100644 index 0000000..f24f9e8 --- /dev/null +++ b/Documentation/DocBook/networking.tmpl @@ -0,0 +1,106 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="LinuxNetworking"> + <bookinfo> + <title>Linux Networking and Network Devices APIs</title> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License as published by the Free Software Foundation; either + version 2 of the License, or (at your option) any later + version. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + See the GNU General Public License for more details. + </para> + + <para> + You should have received a copy of the GNU General Public + License along with this program; if not, write to the Free + Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, + MA 02111-1307 USA + </para> + + <para> + For more details see the file COPYING in the source + distribution of Linux. + </para> + </legalnotice> + </bookinfo> + +<toc></toc> + + <chapter id="netcore"> + <title>Linux Networking</title> + <sect1><title>Networking Base Types</title> +!Iinclude/linux/net.h + </sect1> + <sect1><title>Socket Buffer Functions</title> +!Iinclude/linux/skbuff.h +!Iinclude/net/sock.h +!Enet/socket.c +!Enet/core/skbuff.c +!Enet/core/sock.c +!Enet/core/datagram.c +!Enet/core/stream.c + </sect1> + <sect1><title>Socket Filter</title> +!Enet/core/filter.c + </sect1> + <sect1><title>Generic Network Statistics</title> +!Iinclude/linux/gen_stats.h +!Enet/core/gen_stats.c +!Enet/core/gen_estimator.c + </sect1> + <sect1><title>SUN RPC subsystem</title> +<!-- The !D functionality is not perfect, garbage has to be protected by comments +!Dnet/sunrpc/sunrpc_syms.c +--> +!Enet/sunrpc/xdr.c +!Enet/sunrpc/svc_xprt.c +!Enet/sunrpc/xprt.c +!Enet/sunrpc/sched.c +!Enet/sunrpc/socklib.c +!Enet/sunrpc/stats.c +!Enet/sunrpc/rpc_pipe.c +!Enet/sunrpc/rpcb_clnt.c +!Enet/sunrpc/clnt.c + </sect1> + </chapter> + + <chapter id="netdev"> + <title>Network device support</title> + <sect1><title>Driver Support</title> +!Enet/core/dev.c +!Enet/ethernet/eth.c +!Enet/sched/sch_generic.c +!Iinclude/linux/etherdevice.h +!Iinclude/linux/netdevice.h + </sect1> + <sect1><title>PHY Support</title> +!Edrivers/net/phy/phy.c +!Idrivers/net/phy/phy.c +!Edrivers/net/phy/phy_device.c +!Idrivers/net/phy/phy_device.c +!Edrivers/net/phy/mdio_bus.c +!Idrivers/net/phy/mdio_bus.c + </sect1> +<!-- FIXME: Removed for now since no structured comments in source + <sect1><title>Wireless</title> +X!Enet/core/wireless.c + </sect1> +--> + <sect1><title>Synchronous PPP</title> +!Edrivers/net/wan/syncppp.c + </sect1> + </chapter> + +</book> diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt index d0634a5..c64158e 100644 --- a/Documentation/RCU/NMI-RCU.txt +++ b/Documentation/RCU/NMI-RCU.txt @@ -25,7 +25,7 @@ the NMI handler to take the default machine-specific action. This nmi_callback variable is a global function pointer to the current NMI handler. - fastcall void do_nmi(struct pt_regs * regs, long error_code) + void do_nmi(struct pt_regs * regs, long error_code) { int cpu; diff --git a/Documentation/SubmitChecklist b/Documentation/SubmitChecklist index 34e06d2..da10e07 100644 --- a/Documentation/SubmitChecklist +++ b/Documentation/SubmitChecklist @@ -20,7 +20,11 @@ kernel patches. 4: ppc64 is a good architecture for cross-compilation checking because it tends to use `unsigned long' for 64-bit quantities. -5: Matches kernel coding style(!) +5: Check your patch for general style as detailed in + Documentation/CodingStyle. Check for trivial violations with the + patch style checker prior to submission (scripts/checkpatch.pl). + You should be able to justify all violations that remain in + your patch. 6: Any new or modified CONFIG options don't muck up the config menu. @@ -79,13 +83,3 @@ kernel patches. 23: Tested after it has been merged into the -mm patchset to make sure that it still works with all of the other queued patches and various changes in the VM, VFS, and other subsystems. - -24: Avoid whitespace damage such as indenting with spaces or whitespace - at the end of lines. You can test this by feeding the patch to - "git apply --check --whitespace=error-all" - -25: Check your patch for general style as detailed in - Documentation/CodingStyle. Check for trivial violations with the - patch style checker prior to submission (scripts/checkpatch.pl). - You should be able to justify all violations that remain in - your patch. diff --git a/Documentation/atomic_ops.txt b/Documentation/atomic_ops.txt index f20c10c..4ef2450 100644 --- a/Documentation/atomic_ops.txt +++ b/Documentation/atomic_ops.txt @@ -186,7 +186,8 @@ If the atomic value v is not equal to u, this function adds a to v, and returns non zero. If v is equal to u then it returns zero. This is done as an atomic operation. -atomic_add_unless requires explicit memory barriers around the operation. +atomic_add_unless requires explicit memory barriers around the operation +unless it fails (returns 0). atomic_inc_not_zero, equivalent to atomic_add_unless(v, 1, 0) diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt index 42d7c4c..31d12e2 100644 --- a/Documentation/cgroups.txt +++ b/Documentation/cgroups.txt @@ -28,7 +28,7 @@ CONTENTS: 4. Questions 1. Control Groups -========== +================= 1.1 What are cgroups ? ---------------------- @@ -143,10 +143,10 @@ proliferation of such cgroups. Also lets say that the administrator would like to give enhanced network access temporarily to a student's browser (since it is night and the user -wants to do online gaming :) OR give one of the students simulation +wants to do online gaming :)) OR give one of the students simulation apps enhanced CPU power, -With ability to write pids directly to resource classes, its just a +With ability to write pids directly to resource classes, it's just a matter of : # echo pid > /mnt/network/<new_class>/tasks @@ -227,10 +227,13 @@ Each cgroup is represented by a directory in the cgroup file system containing the following files describing that cgroup: - tasks: list of tasks (by pid) attached to that cgroup - - notify_on_release flag: run /sbin/cgroup_release_agent on exit? + - releasable flag: cgroup currently removeable? + - notify_on_release flag: run the release agent on exit? + - release_agent: the path to use for release notifications (this file + exists in the top cgroup only) Other subsystems such as cpusets may add additional files in each -cgroup dir +cgroup dir. New cgroups are created using the mkdir system call or shell command. The properties of a cgroup, such as its flags, are @@ -257,7 +260,7 @@ performance. To allow access from a cgroup to the css_sets (and hence tasks) that comprise it, a set of cg_cgroup_link objects form a lattice; each cg_cgroup_link is linked into a list of cg_cgroup_links for -a single cgroup on its cont_link_list field, and a list of +a single cgroup on its cgrp_link_list field, and a list of cg_cgroup_links for a single css_set on its cg_link_list. Thus the set of tasks in a cgroup can be listed by iterating over @@ -271,9 +274,6 @@ for cgroups, with a minimum of additional kernel code. 1.4 What does notify_on_release do ? ------------------------------------ -*** notify_on_release is disabled in the current patch set. It will be -*** reactivated in a future patch in a less-intrusive manner - If the notify_on_release flag is enabled (1) in a cgroup, then whenever the last task in the cgroup leaves (exits or attaches to some other cgroup) and the last child cgroup of that cgroup @@ -360,8 +360,8 @@ Now you want to do something with this cgroup. In this directory you can find several files: # ls -notify_on_release release_agent tasks -(plus whatever files are added by the attached subsystems) +notify_on_release releasable tasks +(plus whatever files added by the attached subsystems) Now attach your shell to this cgroup: # /bin/echo $$ > tasks @@ -404,19 +404,13 @@ with a subsystem id which will be assigned by the cgroup system. Other fields in the cgroup_subsys object include: - subsys_id: a unique array index for the subsystem, indicating which - entry in cgroup->subsys[] this subsystem should be - managing. Initialized by cgroup_register_subsys(); prior to this - it should be initialized to -1 + entry in cgroup->subsys[] this subsystem should be managing. -- hierarchy: an index indicating which hierarchy, if any, this - subsystem is currently attached to. If this is -1, then the - subsystem is not attached to any hierarchy, and all tasks should be - considered to be members of the subsystem's top_cgroup. It should - be initialized to -1. +- name: should be initialized to a unique subsystem name. Should be + no longer than MAX_CGROUP_TYPE_NAMELEN. -- name: should be initialized to a unique subsystem name prior to - calling cgroup_register_subsystem. Should be no longer than - MAX_CGROUP_TYPE_NAMELEN +- early_init: indicate if the subsystem needs early initialization + at system boot. Each cgroup object created by the system has an array of pointers, indexed by subsystem id; this pointer is entirely managed by the @@ -434,8 +428,6 @@ situation. See kernel/cgroup.c for more details. Subsystems can take/release the cgroup_mutex via the functions -cgroup_lock()/cgroup_unlock(), and can -take/release the callback_mutex via the functions cgroup_lock()/cgroup_unlock(). Accessing a task's cgroup pointer may be done in the following ways: @@ -444,7 +436,7 @@ Accessing a task's cgroup pointer may be done in the following ways: - inside an rcu_read_lock() section via rcu_dereference() 3.3 Subsystem API --------------------------- +----------------- Each subsystem should: @@ -455,7 +447,8 @@ Each subsystem may export the following methods. The only mandatory methods are create/destroy. Any others that are null are presumed to be successful no-ops. -struct cgroup_subsys_state *create(struct cgroup *cont) +struct cgroup_subsys_state *create(struct cgroup_subsys *ss, + struct cgroup *cgrp) (cgroup_mutex held by caller) Called to create a subsystem state object for a cgroup. The @@ -470,7 +463,7 @@ identified by the passed cgroup object having a NULL parent (since it's the root of the hierarchy) and may be an appropriate place for initialization code. -void destroy(struct cgroup *cont) +void destroy(struct cgroup_subsys *ss, struct cgroup *cgrp) (cgroup_mutex held by caller) The cgroup system is about to destroy the passed cgroup; the subsystem @@ -481,7 +474,14 @@ cgroup->parent is still valid. (Note - can also be called for a newly-created cgroup if an error occurs after this subsystem's create() method has been called for the new cgroup). -int can_attach(struct cgroup_subsys *ss, struct cgroup *cont, +void pre_destroy(struct cgroup_subsys *ss, struct cgroup *cgrp); +(cgroup_mutex held by caller) + +Called before checking the reference count on each subsystem. This may +be useful for subsystems which have some extra references even if +there are not tasks in the cgroup. + +int can_attach(struct cgroup_subsys *ss, struct cgroup *cgrp, struct task_struct *task) (cgroup_mutex held by caller) @@ -492,8 +492,8 @@ unspecified task can be moved into the cgroup. Note that this isn't called on a fork. If this method returns 0 (success) then this should remain valid while the caller holds cgroup_mutex. -void attach(struct cgroup_subsys *ss, struct cgroup *cont, - struct cgroup *old_cont, struct task_struct *task) +void attach(struct cgroup_subsys *ss, struct cgroup *cgrp, + struct cgroup *old_cgrp, struct task_struct *task) Called after the task has been attached to the cgroup, to allow any post-attachment activity that requires memory allocations or blocking. @@ -505,9 +505,9 @@ registration for all existing tasks. void exit(struct cgroup_subsys *ss, struct task_struct *task) -Called during task exit +Called during task exit. -int populate(struct cgroup_subsys *ss, struct cgroup *cont) +int populate(struct cgroup_subsys *ss, struct cgroup *cgrp) Called after creation of a cgroup to allow a subsystem to populate the cgroup directory with file entries. The subsystem should make @@ -516,7 +516,7 @@ include/linux/cgroup.h for details). Note that although this method can return an error code, the error code is currently not always handled well. -void post_clone(struct cgroup_subsys *ss, struct cgroup *cont) +void post_clone(struct cgroup_subsys *ss, struct cgroup *cgrp) Called at the end of cgroup_clone() to do any paramater initialization which might be required before a task could attach. For diff --git a/Documentation/controllers/memory.txt b/Documentation/controllers/memory.txt index b5bbea9..6015347 100644 --- a/Documentation/controllers/memory.txt +++ b/Documentation/controllers/memory.txt @@ -170,14 +170,14 @@ NOTE: We can use a suffix (k, K, m, M, g or G) to indicate values in kilo, mega or gigabytes. # cat /cgroups/0/memory.limit_in_bytes -4194304 Bytes +4194304 NOTE: The interface has now changed to display the usage in bytes instead of pages We can check the usage: # cat /cgroups/0/memory.usage_in_bytes -1216512 Bytes +1216512 A successful write to this file does not guarantee a successful set of this limit to the value written into the file. This can be due to a @@ -187,7 +187,7 @@ this file after a write to guarantee the value committed by the kernel. # echo -n 1 > memory.limit_in_bytes # cat memory.limit_in_bytes -4096 Bytes +4096 The memory.failcnt field gives the number of times that the cgroup limit was exceeded. @@ -233,13 +233,6 @@ cgroup might have some charge associated with it, even though all tasks have migrated away from it. Such charges are automatically dropped at rmdir() if there are no tasks. -4.4 Choosing what to account -- Page Cache (unmapped) vs RSS (mapped)? - -The type of memory accounted by the cgroup can be limited to just -mapped pages by writing "1" to memory.control_type field - -echo -n 1 > memory.control_type - 5. TODO 1. Add support for accounting huge pages (as a separate controller) @@ -262,18 +255,19 @@ References 3. Emelianov, Pavel. Resource controllers based on process cgroups http://lkml.org/lkml/2007/3/6/198 4. Emelianov, Pavel. RSS controller based on process cgroups (v2) - http://lkml.org/lkml/2007/4/9/74 + http://lkml.org/lkml/2007/4/9/78 5. Emelianov, Pavel. RSS controller based on process cgroups (v3) http://lkml.org/lkml/2007/5/30/244 6. Menage, Paul. Control Groups v10, http://lwn.net/Articles/236032/ 7. Vaidyanathan, Srinivasan, Control Groups: Pagecache accounting and control subsystem (v3), http://lwn.net/Articles/235534/ -8. Singh, Balbir. RSS controller V2 test results (lmbench), +8. Singh, Balbir. RSS controller v2 test results (lmbench), http://lkml.org/lkml/2007/5/17/232 -9. Singh, Balbir. RSS controller V2 AIM9 results +9. Singh, Balbir. RSS controller v2 AIM9 results http://lkml.org/lkml/2007/5/18/1 -10. Singh, Balbir. Memory controller v6 results, +10. Singh, Balbir. Memory controller v6 test results, http://lkml.org/lkml/2007/8/19/36 -11. Singh, Balbir. Memory controller v6, http://lkml.org/lkml/2007/8/17/69 +11. Singh, Balbir. Memory controller introduction (v6), + http://lkml.org/lkml/2007/8/17/69 12. Corbet, Jonathan, Controlling memory use in cgroups, http://lwn.net/Articles/243795/ diff --git a/Documentation/cpuidle/core.txt b/Documentation/cpuidle/core.txt new file mode 100644 index 0000000..63ecc5d --- /dev/null +++ b/Documentation/cpuidle/core.txt @@ -0,0 +1,23 @@ + + Supporting multiple CPU idle levels in kernel + + cpuidle + +General Information: + +Various CPUs today support multiple idle levels that are differentiated +by varying exit latencies and power consumption during idle. +cpuidle is a generic in-kernel infrastructure that separates +idle policy (governor) from idle mechanism (driver) and provides a +standardized infrastructure to support independent development of +governors and drivers. + +cpuidle resides under drivers/cpuidle. + +Boot options: +"cpuidle_sysfs_switch" +enables current_governor interface in /sys/devices/system/cpu/cpuidle/, +which can be used to switch governors at run time. This boot option +is meant for developer testing only. In normal usage, kernel picks the +best governor based on governor ratings. +SEE ALSO: sysfs.txt in this directory. diff --git a/Documentation/cpuidle/driver.txt b/Documentation/cpuidle/driver.txt new file mode 100644 index 0000000..7a9e09e --- /dev/null +++ b/Documentation/cpuidle/driver.txt @@ -0,0 +1,31 @@ + + + Supporting multiple CPU idle levels in kernel + + cpuidle drivers + + + + +cpuidle driver hooks into the cpuidle infrastructure and handles the +architecture/platform dependent part of CPU idle states. Driver +provides the platform idle state detection capability and also +has mechanisms in place to support actual entry-exit into CPU idle states. + +cpuidle driver initializes the cpuidle_device structure for each CPU device +and registers with cpuidle using cpuidle_register_device. + +It can also support the dynamic changes (like battery <-> AC), by using +cpuidle_pause_and_lock, cpuidle_disable_device and cpuidle_enable_device, +cpuidle_resume_and_unlock. + +Interfaces: +extern int cpuidle_register_driver(struct cpuidle_driver *drv); +extern void cpuidle_unregister_driver(struct cpuidle_driver *drv); +extern int cpuidle_register_device(struct cpuidle_device *dev); +extern void cpuidle_unregister_device(struct cpuidle_device *dev); + +extern void cpuidle_pause_and_lock(void); +extern void cpuidle_resume_and_unlock(void); +extern int cpuidle_enable_device(struct cpuidle_device *dev); +extern void cpuidle_disable_device(struct cpuidle_device *dev); diff --git a/Documentation/cpuidle/governor.txt b/Documentation/cpuidle/governor.txt new file mode 100644 index 0000000..12c6bd5 --- /dev/null +++ b/Documentation/cpuidle/governor.txt @@ -0,0 +1,29 @@ + + + + Supporting multiple CPU idle levels in kernel + + cpuidle governors + + + + +cpuidle governor is policy routine that decides what idle state to enter at +any given time. cpuidle core uses different callbacks to the governor. + +* enable() to enable governor for a particular device +* disable() to disable governor for a particular device +* select() to select an idle state to enter +* reflect() called after returning from the idle state, which can be used + by the governor for some record keeping. + +More than one governor can be registered at the same time and +users can switch between drivers using /sysfs interface (when enabled). +More than one governor part is supported for developers to easily experiment +with different governors. By default, most optimal governor based on your +kernel configuration and platform will be selected by cpuidle. + +Interfaces: +extern int cpuidle_register_governor(struct cpuidle_governor *gov); +extern void cpuidle_unregister_governor(struct cpuidle_governor *gov); +struct cpuidle_governor diff --git a/Documentation/cpuidle/sysfs.txt b/Documentation/cpuidle/sysfs.txt new file mode 100644 index 0000000..50d7b16 --- /dev/null +++ b/Documentation/cpuidle/sysfs.txt @@ -0,0 +1,79 @@ + + + Supporting multiple CPU idle levels in kernel + + cpuidle sysfs + +System global cpuidle related information and tunables are under +/sys/devices/system/cpu/cpuidle + +The current interfaces in this directory has self-explanatory names: +* current_driver +* current_governor_ro + +With cpuidle_sysfs_switch boot option (meant for developer testing) +following objects are visible instead. +* current_driver +* available_governors +* current_governor +In this case users can switch the governor at run time by writing +to current_governor. + + +Per logical CPU specific cpuidle information are under +/sys/devices/system/cpu/cpuX/cpuidle +for each online cpu X + +-------------------------------------------------------------------------------- +# ls -lR /sys/devices/system/cpu/cpu0/cpuidle/ +/sys/devices/system/cpu/cpu0/cpuidle/: +total 0 +drwxr-xr-x 2 root root 0 Feb 8 10:42 state0 +drwxr-xr-x 2 root root 0 Feb 8 10:42 state1 +drwxr-xr-x 2 root root 0 Feb 8 10:42 state2 +drwxr-xr-x 2 root root 0 Feb 8 10:42 state3 + +/sys/devices/system/cpu/cpu0/cpuidle/state0: +total 0 +-r--r--r-- 1 root root 4096 Feb 8 10:42 desc +-r--r--r-- 1 root root 4096 Feb 8 10:42 latency +-r--r--r-- 1 root root 4096 Feb 8 10:42 name +-r--r--r-- 1 root root 4096 Feb 8 10:42 power +-r--r--r-- 1 root root 4096 Feb 8 10:42 time +-r--r--r-- 1 root root 4096 Feb 8 10:42 usage + +/sys/devices/system/cpu/cpu0/cpuidle/state1: +total 0 +-r--r--r-- 1 root root 4096 Feb 8 10:42 desc +-r--r--r-- 1 root root 4096 Feb 8 10:42 latency +-r--r--r-- 1 root root 4096 Feb 8 10:42 name +-r--r--r-- 1 root root 4096 Feb 8 10:42 power +-r--r--r-- 1 root root 4096 Feb 8 10:42 time +-r--r--r-- 1 root root 4096 Feb 8 10:42 usage + +/sys/devices/system/cpu/cpu0/cpuidle/state2: +total 0 +-r--r--r-- 1 root root 4096 Feb 8 10:42 desc +-r--r--r-- 1 root root 4096 Feb 8 10:42 latency +-r--r--r-- 1 root root 4096 Feb 8 10:42 name +-r--r--r-- 1 root root 4096 Feb 8 10:42 power +-r--r--r-- 1 root root 4096 Feb 8 10:42 time +-r--r--r-- 1 root root 4096 Feb 8 10:42 usage + +/sys/devices/system/cpu/cpu0/cpuidle/state3: +total 0 +-r--r--r-- 1 root root 4096 Feb 8 10:42 desc +-r--r--r-- 1 root root 4096 Feb 8 10:42 latency +-r--r--r-- 1 root root 4096 Feb 8 10:42 name +-r--r--r-- 1 root root 4096 Feb 8 10:42 power +-r--r--r-- 1 root root 4096 Feb 8 10:42 time +-r--r--r-- 1 root root 4096 Feb 8 10:42 usage +-------------------------------------------------------------------------------- + + +* desc : Small description about the idle state (string) +* latency : Latency to exit out of this idle state (in microseconds) +* name : Name of the idle state (string) +* power : Power consumed while in this idle state (in milliwatts) +* time : Total time spent in this idle state (in microseconds) +* usage : Number of times this state was entered (count) diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index 43db6fe..ad2bb3b 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -209,7 +209,7 @@ and name space for cpusets, with a minimum of additional kernel code. The cpus and mems files in the root (top_cpuset) cpuset are read-only. The cpus file automatically tracks the value of cpu_online_map using a CPU hotplug notifier, and the mems file -automatically tracks the value of node_states[N_MEMORY]--i.e., +automatically tracks the value of node_states[N_HIGH_MEMORY]--i.e., nodes with memory--using the cpuset_track_online_nodes() hook. diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473 new file mode 100644 index 0000000..22d8b19 --- /dev/null +++ b/Documentation/hwmon/adt7473 @@ -0,0 +1,79 @@ +Kernel driver adt7473 +====================== + +Supported chips: + * Analog Devices ADT7473 + Prefix: 'adt7473' + Addresses scanned: I2C 0x2C, 0x2D, 0x2E + Datasheet: Publicly available at the Analog Devices website + +Author: Darrick J. Wong + +Description +----------- + +This driver implements support for the Analog Devices ADT7473 chip family. + +The LM85 uses the 2-wire interface compatible with the SMBUS 2.0 +specification. Using an analog to digital converter it measures three (3) +temperatures and two (2) voltages. It has three (3) 16-bit counters for +measuring fan speed. There are three (3) PWM outputs that can be used +to control fan speed. + +A sophisticated control system for the PWM outputs is designed into the +LM85 that allows fan speed to be adjusted automatically based on any of the +three temperature sensors. Each PWM output is individually adjustable and +programmable. Once configured, the ADT7473 will adjust the PWM outputs in +response to the measured temperatures without further host intervention. +This feature can also be disabled for manual control of the PWM's. + +Each of the measured inputs (voltage, temperature, fan speed) has +corresponding high/low limit values. The ADT7473 will signal an ALARM if +any measured value exceeds either limit. + +The ADT7473 samples all inputs continuously. The driver will not read +the registers more often than once every other second. Further, +configuration data is only read once per minute. + +Special Features +---------------- + +The ADT7473 have a 10-bit ADC and can therefore measure temperatures +with 0.25 degC resolution. Temperature readings can be configured either +for twos complement format or "Offset 64" format, wherein 63 is subtracted +from the raw value to get the temperature value. + +The Analog Devices datasheet is very detailed and describes a procedure for +determining an optimal configuration for the automatic PWM control. + +Hardware Configurations +----------------------- + +The ADT7473 chips have an optional SMBALERT output that can be used to +signal the chipset in case a limit is exceeded or the temperature sensors +fail. Individual sensor interrupts can be masked so they won't trigger +SMBALERT. The SMBALERT output if configured replaces the PWM2 function. + +Configuration Notes +------------------- + +Besides standard interfaces driver adds the following: + +* PWM Control + +* pwm#_auto_point1_pwm and pwm#_auto_point1_temp and +* pwm#_auto_point2_pwm and pwm#_auto_point2_temp - + +point1: Set the pwm speed at a lower temperature bound. +point2: Set the pwm speed at a higher temperature bound. + +The ADT7473 will scale the pwm between the lower and higher pwm speed when +the temperature is between the two temperature boundaries. PWM values range +from 0 (off) to 255 (full speed). + +Notes +----- + +The NVIDIA binary driver presents an ADT7473 chip via an on-card i2c bus. +Unfortunately, they fail to set the i2c adapter class, so this driver may +fail to find the chip until the nvidia driver is patched. diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index 170bf86..dbbe6c70 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -4,9 +4,10 @@ Kernel driver coretemp Supported chips: * All Intel Core family Prefix: 'coretemp' - CPUID: family 0x6, models 0xe, 0xf, 0x16 + CPUID: family 0x6, models 0xe, 0xf, 0x16, 0x17 Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3A: System Programming Guide + http://softwarecommunity.intel.com/Wiki/Mobility/720.htm Author: Rudolf Marek @@ -25,7 +26,8 @@ may be raised, if the temperature grows enough (more than TjMax) to trigger the Out-Of-Spec bit. Following table summarizes the exported sysfs files: temp1_input - Core temperature (in millidegrees Celsius). -temp1_crit - Maximum junction temperature (in millidegrees Celsius). +temp1_max - All cooling devices should be turned on (on Core2). +temp1_crit - Maximum junction temperature (in millidegrees Celsius). temp1_crit_alarm - Set when Out-of-spec bit is set, never clears. Correct CPU operation is no longer guaranteed. temp1_label - Contains string "Core X", where X is processor diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 3bd9583..c31e029 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -12,8 +12,9 @@ Supported adapters: * Intel 82801G (ICH7) * Intel 631xESB/632xESB (ESB2) * Intel 82801H (ICH8) - * Intel ICH9 + * Intel 82801I (ICH9) * Intel Tolapai + * Intel ICH10 Datasheets: Publicly available at the Intel website Authors: diff --git a/Documentation/i386/IO-APIC.txt b/Documentation/i386/IO-APIC.txt index 435e69e..f951666 100644 --- a/Documentation/i386/IO-APIC.txt +++ b/Documentation/i386/IO-APIC.txt @@ -1,12 +1,14 @@ Most (all) Intel-MP compliant SMP boards have the so-called 'IO-APIC', -which is an enhanced interrupt controller, it enables us to route -hardware interrupts to multiple CPUs, or to CPU groups. +which is an enhanced interrupt controller. It enables us to route +hardware interrupts to multiple CPUs, or to CPU groups. Without an +IO-APIC, interrupts from hardware will be delivered only to the +CPU which boots the operating system (usually CPU#0). Linux supports all variants of compliant SMP boards, including ones with -multiple IO-APICs. (multiple IO-APICs are used in high-end servers to -distribute IRQ load further). +multiple IO-APICs. Multiple IO-APICs are used in high-end servers to +distribute IRQ load further. -There are (a few) known breakages in certain older boards, which bugs are +There are (a few) known breakages in certain older boards, such bugs are usually worked around by the kernel. If your MP-compliant SMP board does not boot Linux, then consult the linux-smp mailing list archives first. @@ -28,18 +30,18 @@ If your box boots fine with enabled IO-APIC IRQs, then your hell:~> <---------------------------- -some interrupts are still listed as 'XT PIC', but this is not a problem, +Some interrupts are still listed as 'XT PIC', but this is not a problem; none of those IRQ sources is performance-critical. -in the unlikely case that your board does not create a working mp-table, +In the unlikely case that your board does not create a working mp-table, you can use the pirq= boot parameter to 'hand-construct' IRQ entries. This -is nontrivial though and cannot be automated. One sample /etc/lilo.conf +is non-trivial though and cannot be automated. One sample /etc/lilo.conf entry: append="pirq=15,11,10" -the actual numbers depend on your system, on your PCI cards and on their +The actual numbers depend on your system, on your PCI cards and on their PCI slot position. Usually PCI slots are 'daisy chained' before they are connected to the PCI chipset IRQ routing facility (the incoming PIRQ1-4 lines): @@ -54,7 +56,7 @@ lines): PIRQ1 ----| |- `----| |- `----| |- `----| |--------| | `-' `-' `-' `-' `-' -every PCI card emits a PCI IRQ, which can be INTA,INTB,INTC,INTD: +Every PCI card emits a PCI IRQ, which can be INTA, INTB, INTC or INTD: ,-. INTD--| | @@ -95,21 +97,21 @@ card (IRQ11) in Slot3, and have Slot1 empty: [value '0' is a generic 'placeholder', reserved for empty (or non-IRQ emitting) slots.] -generally, it's always possible to find out the correct pirq= settings, just +Generally, it's always possible to find out the correct pirq= settings, just permute all IRQ numbers properly ... it will take some time though. An 'incorrect' pirq line will cause the booting process to hang, or a device -won't function properly (if it's inserted as eg. a module). +won't function properly (e.g. if it's inserted as a module). -If you have 2 PCI buses, then you can use up to 8 pirq values. Although such +If you have 2 PCI buses, then you can use up to 8 pirq values, although such boards tend to have a good configuration. Be prepared that it might happen that you need some strange pirq line: append="pirq=0,0,0,0,0,0,9,11" -use smart try-and-err techniques to find out the correct pirq line ... +Use smart trial-and-error techniques to find out the correct pirq line ... -good luck and mail to linux-smp@vger.kernel.org or +Good luck and mail to linux-smp@vger.kernel.org or linux-kernel@vger.kernel.org if you have any problems that are not covered by this document. diff --git a/Documentation/ja_JP/stable_kernel_rules.txt b/Documentation/ja_JP/stable_kernel_rules.txt index 17d8751..b3ffe87 100644 --- a/Documentation/ja_JP/stable_kernel_rules.txt +++ b/Documentation/ja_JP/stable_kernel_rules.txt @@ -11,69 +11,69 @@ comment or update of this file, please try to update Original(English) file at first. ================================== -ããã¯ã +これは、 linux-2.6.24/Documentation/stable_kernel_rules.txt -ã®å訳ã§ãã +の和訳です。 -翻訳å£ä½ï¼ JF ããã¸ã§ã¯ã < http://www.linux.or.jp/JF/ > -翻訳æ¥ï¼ 2007/12/30 -翻訳è
ï¼ Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com> -æ ¡æ£è
ï¼ æ¦äºä¼¸å
ããã<takei at webmasters dot gr dot jp> - ããããã (Seiji Kaneko) <skaneko at a2 dot mbn dot or dot jp> - å°æ é
å
¸ãã (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp> - éå£ãã (Kenji Noguchi) <tokyo246 at gmail dot com> - ç¥å®®ä¿¡å¤ªéãã <jin at libjingu dot jp> +翻訳団体： JF プロジェクト < http://www.linux.or.jp/JF/ > +翻訳日： 2007/12/30 +翻訳者： Tsugikazu Shibata <tshibata at ab dot jp dot nec dot com> +校正者： 武井伸光さん、<takei at webmasters dot gr dot jp> + かねこさん (Seiji Kaneko) <skaneko at a2 dot mbn dot or dot jp> + 小林 雅典さん (Masanori Kobayasi) <zap03216 at nifty dot ne dot jp> + 野口さん (Kenji Noguchi) <tokyo246 at gmail dot com> + 神宮信太郎さん <jin at libjingu dot jp> ================================== -ãã£ã¨ç¥ãããã£ã Linux 2.6 -stable ãªãªã¼ã¹ã®å
¨ã¦ +ずっと知りたかった Linux 2.6 -stable リリースの全て -"-stable" ããªã¼ã«ã©ã®ãããªç¨®é¡ã®ããããåãå
¥ããããããã©ã®ãã㪠-ãã®ãåãå
¥ããããªãããã«ã¤ãã¦ã®è¦å- +"-stable" ツリーにどのような種類のパッチが受け入れられるか、どのような +ものが受け入れられないか、についての規則- - - æããã«æ£ããããã¹ãããã¦ãããã®ã§ãªããã°ãªããªãã - - æè(å¤æ´è¡ã®åå¾)ãå«ã㦠100 è¡ãã大ããã¦ã¯ãããªãã - - ãã ä¸åã®ãã¨ã ããä¿®æ£ãã¦ããã¹ãã - - çãæ©ã¾ãã¦ããæ¬ç©ã®ãã°ãä¿®æ£ããªããã°ãªããªãã("ããã¯ãã°ã§ - ãããããããªãã..." ã®ãããªãã®ã§ã¯ãªã) - - ãã«ãã¨ã©ã¼(CONFIG_BROKENã«ãªã£ã¦ãããã®ãé¤ã), oops, ãã³ã°ããã¼ - ã¿ç ´å£ãç¾å®ã®ã»ãã¥ãªãã£åé¡ããã®ä» "ãããããã¯ãã¡ã ã"ã¨ãã - ãããªãã®ãä¿®æ£ããªããã°ãªããªããçãè¨ãã°ãé大ãªåé¡ã - - ã©ã®ããã«ç«¶åç¶æ
ãçºçãããã®èª¬æãä¸ç·ã«æ¸ããã¦ããªãéãã - "çè«çã«ã¯ç«¶åç¶æ
ã«ãªã"ãããªãã®ã¯ä¸å¯ã - - ãããªãäºç´°ãªä¿®æ£ãå«ãããã¨ã¯ã§ããªãã(ã¹ãã«ã®ä¿®æ£ã空ç½ã®ã¯ãªã¼ - ã³ã¢ãããªã©) - - 対å¿ãããµãã·ã¹ãã ã¡ã³ãããåãå
¥ãããã®ã§ãªããã°ãªããªãã - - Documentation/SubmittingPatches ã®è¦åã«å¾ã£ããã®ã§ãªããã°ãªããªãã + - 明らかに正しく、テストされているものでなければならない。 + - 文脈(変更行の前後)を含めて 100 行より大きくてはいけない。 + - ただ一個のことだけを修正しているべき。 + - 皆を悩ませている本物のバグを修正しなければならない。("これはバグで + あるかもしれないが..." のようなものではない) + - ビルドエラー(CONFIG_BROKENになっているものを除く), oops, ハング、デー + タ破壊、現実のセキュリティ問題、その他 "ああ、これはダメだね"という + ようなものを修正しなければならない。短く言えば、重大な問題。 + - どのように競合状態が発生するかの説明も一緒に書かれていない限り、 + "理論的には競合状態になる"ようなものは不可。 + - いかなる些細な修正も含めることはできない。(スペルの修正、空白のクリー + ンアップなど) + - 対応するサブシステムメンテナが受け入れたものでなければならない。 + - Documentation/SubmittingPatches の規則に従ったものでなければならない。 --stable ããªã¼ã«ããããéä»ããæç¶ã- +-stable ツリーにパッチを送付する手続き- - - ä¸è¨ã®è¦åã«å¾ã£ã¦ãããã確èªããå¾ã«ãstable@kernel.org ã«ããã - ãéãã - - éä¿¡è
ã¯ãããããã¥ã¼ã«åãä»ããããéã«ã¯ ACK ããå´ä¸ãããå ´å - ã«ã¯ NAK ãåãåãããã®åå¿ã¯éçºè
ãã¡ã®ã¹ã±ã¸ã¥ã¼ã«ã«ãã£ã¦ãæ° - æ¥ãããå ´åãããã - - ããåãåããããããããã¯ä»ã®éçºè
ãã¡ã®ã¬ãã¥ã¼ã®ããã« - -stable ãã¥ã¼ã«è¿½å ãããã - - ã»ãã¥ãªãã£ãããã¯ãã®ã¨ã¤ãªã¢ã¹ (stable@kernel.org) ã«éãããã¹ - ãã§ã¯ãªãã代ããã« security@kernel.org ã®ã¢ãã¬ã¹ã«éãããã + - 上記の規則に従っているかを確認した後に、stable@kernel.org にパッチ + を送る。 + - 送信者はパッチがキューに受け付けられた際には ACK を、却下された場合 + には NAK を受け取る。この反応は開発者たちのスケジュールによって、数 + 日かかる場合がある。 + - もし受け取られたら、パッチは他の開発者たちのレビューのために + -stable キューに追加される。 + - セキュリティパッチはこのエイリアス (stable@kernel.org) に送られるべ + きではなく、代わりに security@kernel.org のアドレスに送られる。 -ã¬ãã¥ã¼ãµã¤ã¯ã«- +レビューサイクル- - - -stable ã¡ã³ãããã¬ãã¥ã¼ãµã¤ã¯ã«ã決ããã¨ãããããã¯ã¬ãã¥ã¼å§ - å¡ä¼ã¨ããããå½±é¿ããé åã®ã¡ã³ãã(æä¾è
ããã®é åã®ã¡ã³ããã§ç¡ - ãéã)ã«éãããlinux-kernel ã¡ã¼ãªã³ã°ãªã¹ãã«CCãããã - - ã¬ãã¥ã¼å§å¡ä¼ã¯ 48æéã®éã« ACK ã NAK ãåºãã - - ããããããå§å¡ä¼ã®ã¡ã³ãããå´ä¸ããããã¡ã³ããéãã¡ã³ããæ°ä» - ããªãã£ãåé¡ãæã¡ããããlinux-kernel ã¡ã³ãããããã«ç°è°ãå±ã - ãå ´åã«ã¯ããããã¯ãã¥ã¼ããåé¤ãããã - - ã¬ãã¥ã¼ãµã¤ã¯ã«ã®æå¾ã«ãACK ãåãããããã¯ææ°ã® -stable ãªãªã¼ - ã¹ã«è¿½å ããããã®å¾ã«æ°ãã -stable ãªãªã¼ã¹ãè¡ãããã - - ã»ãã¥ãªãã£ãããã¯ãé常ã®ã¬ãã¥ã¼ãµã¤ã¯ã«ãéãããã»ãã¥ãªã㣠- ã«ã¼ãã«ãã¼ã ããç´æ¥ -stable ããªã¼ã«åãä»ããããã - ãã®æç¶ãã®è©³ç´°ã«ã¤ãã¦ã¯ kernel security ãã¼ã ã«åãåããããã¨ã + - -stable メンテナがレビューサイクルを決めるとき、パッチはレビュー委 + 員会とパッチが影響する領域のメンテナ(提供者がその領域のメンテナで無 + い限り)に送られ、linux-kernel メーリングリストにCCされる。 + - レビュー委員会は 48時間の間に ACK か NAK を出す。 + - もしパッチが委員会のメンバから却下されるか、メンテナ達やメンバが気付 + かなかった問題が持ちあがり、linux-kernel メンバがパッチに異議を唱え + た場合には、パッチはキューから削除される。 + - レビューサイクルの最後に、ACK を受けたパッチは最新の -stable リリー + スに追加され、その後に新しい -stable リリースが行われる。 + - セキュリティパッチは、通常のレビューサイクルを通らず、セキュリティ + カーネルチームから直接 -stable ツリーに受け付けられる。 + この手続きの詳細については kernel security チームに問い合わせること。 -ã¬ãã¥ã¼å§å¡ä¼- +レビュー委員会- - - ãã®å§å¡ä¼ã¯ããã®ã¿ã¹ã¯ã«ã¤ãã¦æ´»åããå¤ãã®ãã©ã³ãã£ã¢ã¨ãå°æ°ã® - éãã©ã³ãã£ã¢ã®ã«ã¼ãã«éçºè
éã§æ§æããã¦ããã + - この委員会は、このタスクについて活動する多くのボランティアと、少数の + 非ボランティアのカーネル開発者達で構成されている。 diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a4fc7fc..9a5b665 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -950,6 +950,41 @@ and is between 256 and 4096 characters. It is defined in the file when set. Format: <int> + libata.force= [LIBATA] Force configurations. The format is comma + separated list of "[ID:]VAL" where ID is + PORT[:DEVICE]. PORT and DEVICE are decimal numbers + matching port, link or device. Basically, it matches + the ATA ID string printed on console by libata. If + the whole ID part is omitted, the last PORT and DEVICE + values are used. If ID hasn't been specified yet, the + configuration applies to all ports, links and devices. + + If only DEVICE is omitted, the parameter applies to + the port and all links and devices behind it. DEVICE + number of 0 either selects the first device or the + first fan-out link behind PMP device. It does not + select the host link. DEVICE number of 15 selects the + host link and device attached to it. + + The VAL specifies the configuration to force. As long + as there's no ambiguity shortcut notation is allowed. + For example, both 1.5 and 1.5G would work for 1.5Gbps. + The following configurations can be forced. + + * Cable type: 40c, 80c, short40c, unk, ign or sata. + Any ID with matching PORT is used. + + * SATA link speed limit: 1.5Gbps or 3.0Gbps. + + * Transfer mode: pio[0-7], mwdma[0-4] and udma[0-7]. + udma[/][16,25,33,44,66,100,133] notation is also + allowed. + + * [no]ncq: Turn on or off NCQ. + + If there are multiple matching configurations changing + the same attribute, the last one is used. + load_ramdisk= [RAM] List of ramdisks to load from floppy See Documentation/ramdisk.txt. @@ -1056,8 +1091,6 @@ and is between 256 and 4096 characters. It is defined in the file [SCSI] Maximum number of LUNs received. Should be between 1 and 16384. - mca-pentium [BUGS=X86-32] - mcatest= [IA-64] mce [X86-32] Machine Check Exception diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt index 30c1017..83f515c 100644 --- a/Documentation/kprobes.txt +++ b/Documentation/kprobes.txt @@ -92,9 +92,8 @@ handler has run. Up to MAX_STACK_SIZE bytes are copied -- e.g., 64 bytes on i386. Note that the probed function's args may be passed on the stack -or in registers (e.g., for x86_64 or for an i386 fastcall function). -The jprobe will work in either case, so long as the handler's -prototype matches that of the probed function. +or in registers. The jprobe will work in either case, so long as the +handler's prototype matches that of the probed function. 1.3 Return Probes @@ -270,9 +269,9 @@ Kprobes runs the handler whose address is jp->entry. The handler should have the same arg list and return type as the probed function; and just before it returns, it must call jprobe_return(). (The handler never actually returns, since jprobe_return() returns -control to Kprobes.) If the probed function is declared asmlinkage, -fastcall, or anything else that affects how args are passed, the -handler's declaration must match. +control to Kprobes.) If the probed function is declared asmlinkage +or anything else that affects how args are passed, the handler's +declaration must match. register_jprobe() returns 0 on success, or a negative errno otherwise. diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 6c24777..76cb428 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -160,7 +160,7 @@ Hot keys procfs: /proc/acpi/ibm/hotkey sysfs device attribute: hotkey_* -In a ThinkPad, the ACPI HKEY handler is responsible for comunicating +In a ThinkPad, the ACPI HKEY handler is responsible for communicating some important events and also keyboard hot key presses to the operating system. Enabling the hotkey functionality of thinkpad-acpi signals the firmware that such a driver is present, and modifies how the ThinkPad @@ -193,7 +193,7 @@ Not all bits in the mask can be modified. Not all bits that can be modified do anything. Not all hot keys can be individually controlled by the mask. Some models do not support the mask at all, and in those models, hot keys cannot be controlled individually. The behaviour of -the mask is, therefore, higly dependent on the ThinkPad model. +the mask is, therefore, highly dependent on the ThinkPad model. Note that unmasking some keys prevents their default behavior. For example, if Fn+F5 is unmasked, that key will no longer enable/disable @@ -288,7 +288,7 @@ sysfs notes: in ACPI event mode, volume up/down/mute are reported as separate events, but this behaviour may be corrected in future releases of this driver, in which case the - ThinkPad volume mixer user interface semanthics will be + ThinkPad volume mixer user interface semantics will be enforced. hotkey_poll_freq: @@ -306,13 +306,20 @@ sysfs notes: The recommended polling frequency is 10Hz. hotkey_radio_sw: - if the ThinkPad has a hardware radio switch, this + If the ThinkPad has a hardware radio switch, this attribute will read 0 if the switch is in the "radios - disabled" postition, and 1 if the switch is in the + disabled" position, and 1 if the switch is in the "radios enabled" position. This attribute has poll()/select() support. + hotkey_tablet_mode: + If the ThinkPad has tablet capabilities, this attribute + will read 0 if the ThinkPad is in normal mode, and + 1 if the ThinkPad is in tablet mode. + + This attribute has poll()/select() support. + hotkey_report_mode: Returns the state of the procfs ACPI event report mode filter for hot keys. If it is set to 1 (the default), @@ -339,7 +346,7 @@ sysfs notes: wakeup_hotunplug_complete: Set to 1 if the system was waken up because of an undock or bay ejection request, and that request - was sucessfully completed. At this point, it might + was successfully completed. At this point, it might be useful to send the system back to sleep, at the user's choice. Refer to HKEY events 0x4003 and 0x3003, below. @@ -392,7 +399,7 @@ event code Key Notes Lenovo: battery 0x1004 0x03 FN+F4 Sleep button (ACPI sleep button - semanthics, i.e. sleep-to-RAM). + semantics, i.e. sleep-to-RAM). It is always generate some kind of event, either the hot key event or a ACPI sleep button @@ -403,12 +410,12 @@ event code Key Notes time passes. 0x1005 0x04 FN+F5 Radio. Enables/disables - the internal BlueTooth hardware + the internal Bluetooth hardware and W-WAN card if left in control of the firmware. Does not affect the WLAN card. Should be used to turn on/off all - radios (bluetooth+W-WAN+WLAN), + radios (Bluetooth+W-WAN+WLAN), really. 0x1006 0x05 FN+F6 - @@ -417,7 +424,7 @@ event code Key Notes Do you feel lucky today? 0x1008 0x07 FN+F8 IBM: toggle screen expand - Lenovo: configure ultranav + Lenovo: configure UltraNav 0x1009 0x08 FN+F9 - .. .. .. @@ -447,7 +454,7 @@ event code Key Notes 0x1011 0x10 FN+END Brightness down. See brightness up for details. -0x1012 0x11 FN+PGUP Thinklight toggle. This key is +0x1012 0x11 FN+PGUP ThinkLight toggle. This key is always handled by the firmware, even when unmasked. @@ -469,7 +476,7 @@ event code Key Notes key is always handled by the firmware, even when unmasked. -0x1018 0x17 THINKPAD Thinkpad/Access IBM/Lenovo key +0x1018 0x17 THINKPAD ThinkPad/Access IBM/Lenovo key 0x1019 0x18 unknown .. .. .. @@ -488,9 +495,17 @@ If a key is mapped to KEY_UNKNOWN, it generates an input event that includes an scan code. If a key is mapped to anything else, it will generate input device EV_KEY events. +In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW +events for switches: + +SW_RADIO T60 and later hardare rfkill rocker switch +SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A + Non hot-key ACPI HKEY event map: 0x5001 Lid closed 0x5002 Lid opened +0x5009 Tablet swivel: switched to tablet mode +0x500A Tablet swivel: switched to normal mode 0x7000 Radio Switch may have changed state The above events are not propagated by the driver, except for legacy @@ -505,9 +520,7 @@ The above events are never propagated by the driver. 0x3003 Bay ejection (see 0x2x05) complete, can sleep again 0x4003 Undocked (see 0x2x04), can sleep again -0x5009 Tablet swivel: switched to tablet mode -0x500A Tablet swivel: switched to normal mode -0x500B Tablet pen insterted into its storage bay +0x500B Tablet pen inserted into its storage bay 0x500C Tablet pen removed from its storage bay 0x5010 Brightness level changed (newer Lenovo BIOSes) @@ -539,7 +552,7 @@ sysfs (it is read-only). If the hotkey_report_mode module parameter is set to 1 or 2, it cannot be changed later through sysfs (any writes will return -EPERM to signal that hotkey_report_mode was locked. On 2.6.23 and later, where -hotkey_report_mode cannot be changed at all, writes will return -EACES). +hotkey_report_mode cannot be changed at all, writes will return -EACCES). hotkey_report_mode set to 1 makes the driver export through the procfs ACPI event interface all hot key presses (which are *also* sent to the @@ -584,7 +597,7 @@ Sysfs notes: 0: disables Bluetooth / Bluetooth is disabled 1: enables Bluetooth / Bluetooth is enabled. - Note: this interface will be probably be superseeded by the + Note: this interface will be probably be superseded by the generic rfkill class, so it is NOT to be considered stable yet. Video output control -- /proc/acpi/ibm/video @@ -791,12 +804,12 @@ on the X40 (tpb is the ThinkPad Buttons utility): 1 - Related to "Volume up" key press 2 - Related to "Mute on" key press 3 - Related to "Access IBM" key press - 4 - Related to "LCD brightness up" key pess + 4 - Related to "LCD brightness up" key press 5 - Related to "LCD brightness down" key press 11 - Related to "toggle screen expansion" key press/function 12 - Related to "ThinkLight on" 13 - Related to "ThinkLight off" - 14 - Related to "ThinkLight" key press (toggle thinklight) + 14 - Related to "ThinkLight" key press (toggle ThinkLight) The cmos command interface is prone to firmware split-brain problems, as in newer ThinkPads it is just a compatibility layer. Do not use it, it is @@ -1024,7 +1037,7 @@ There are two interfaces to the firmware for direct brightness control, EC and CMOS. To select which one should be used, use the brightness_mode module parameter: brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC -and CMOS. The driver tries to autodetect which interface to use. +and CMOS. The driver tries to auto-detect which interface to use. When display backlight brightness controls are available through the standard ACPI interface, it is best to use it instead of this direct @@ -1266,8 +1279,8 @@ experimental=1 parameter when loading the module. This feature shows the presence and current state of a W-WAN (Sierra Wireless EV-DO) device. -It was tested on a Lenovo Thinkpad X60. It should probably work on other -Thinkpad models which come with this module installed. +It was tested on a Lenovo ThinkPad X60. It should probably work on other +ThinkPad models which come with this module installed. Procfs notes: @@ -1286,7 +1299,7 @@ Sysfs notes: 0: disables WWAN card / WWAN card is disabled 1: enables WWAN card / WWAN card is enabled. - Note: this interface will be probably be superseeded by the + Note: this interface will be probably be superseded by the generic rfkill class, so it is NOT to be considered stable yet. Multiple Commands, Module Parameters @@ -1309,7 +1322,7 @@ Enabling debugging output The module takes a debug parameter which can be used to selectively enable various classes of debugging output, for example: - modprobe ibm_acpi debug=0xffff + modprobe thinkpad_acpi debug=0xffff will enable all debugging output classes. It takes a bitmask, so to enable more than one output class, just add their values. @@ -1356,7 +1369,7 @@ Sysfs interface changelog: NVRAM is compiled out by the user because it is unneeded/undesired in the first place). 0x020101: Marker for thinkpad-acpi with hot key NVRAM polling - and proper hotkey_mask semanthics (version 8 of the + and proper hotkey_mask semantics (version 8 of the NVRAM polling patch). Some development snapshots of 0.18 had an earlier version that did strange things to hotkey_mask. diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 4e17beb..1f506f7 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -1493,7 +1493,7 @@ explicit lock operations, described later). These include: atomic_dec_and_test(); atomic_sub_and_test(); atomic_add_negative(); - atomic_add_unless(); + atomic_add_unless(); /* when succeeds (returns 1) */ test_and_set_bit(); test_and_clear_bit(); test_and_change_bit(); diff --git a/Documentation/networking/tcp.txt b/Documentation/networking/tcp.txt index 0121edc..7d11bb5 100644 --- a/Documentation/networking/tcp.txt +++ b/Documentation/networking/tcp.txt @@ -1,7 +1,7 @@ TCP protocol ============ -Last updated: 21 June 2005 +Last updated: 9 February 2008 Contents ======== @@ -52,9 +52,9 @@ research and RFC's before developing new modules. The method that is used to determine which congestion control mechanism is determined by the setting of the sysctl net.ipv4.tcp_congestion_control. The default congestion control will be the last one registered (LIFO); -so if you built everything as modules. the default will be reno. If you -build with the default's from Kconfig, then BIC will be builtin (not a module) -and it will end up the default. +so if you built everything as modules, the default will be reno. If you +build with the defaults from Kconfig, then CUBIC will be builtin (not a +module) and it will end up the default. If you really want a particular default value then you will need to set it with the sysctl. If you use a sysctl, the module will be autoloaded diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index c53d263..461e4f1 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -310,9 +310,12 @@ used with suspend-to-disk: PM_EVENT_SUSPEND -- quiesce the driver and put hardware into a low-power state. When used with system sleep states like "suspend-to-RAM" or "standby", the upcoming resume() call will often be able to rely on - state kept in hardware, or issue system wakeup events. When used - instead with suspend-to-disk, few devices support this capability; - most are completely powered off. + state kept in hardware, or issue system wakeup events. + + PM_EVENT_HIBERNATE -- Put hardware into a low-power state and enable wakeup + events as appropriate. It is only used with hibernation + (suspend-to-disk) and few devices are able to wake up the system from + this state; most are completely powered off. PM_EVENT_FREEZE -- quiesce the driver, but don't necessarily change into any low power mode. A system snapshot is about to be taken, often @@ -329,8 +332,8 @@ used with suspend-to-disk: wakeup events nor DMA are allowed. To enter "standby" (ACPI S1) or "Suspend to RAM" (STR, ACPI S3) states, or -the similarly named APM states, only PM_EVENT_SUSPEND is used; for "Suspend -to Disk" (STD, hibernate, ACPI S4), all of those event codes are used. +the similarly named APM states, only PM_EVENT_SUSPEND is used; the other event +codes are used for hibernation ("Suspend to Disk", STD, ACPI S4). There's also PM_EVENT_ON, a value which never appears as a suspend event but is sometimes used to record the "not suspended" device state. diff --git a/Documentation/sched-rt-group.txt b/Documentation/sched-rt-group.txt new file mode 100644 index 0000000..1c6332f --- /dev/null +++ b/Documentation/sched-rt-group.txt @@ -0,0 +1,59 @@ + + +Real-Time group scheduling. + +The problem space: + +In order to schedule multiple groups of realtime tasks each group must +be assigned a fixed portion of the CPU time available. Without a minimum +guarantee a realtime group can obviously fall short. A fuzzy upper limit +is of no use since it cannot be relied upon. Which leaves us with just +the single fixed portion. + +CPU time is divided by means of specifying how much time can be spent +running in a given period. Say a frame fixed realtime renderer must +deliver 25 frames a second, which yields a period of 0.04s. Now say +it will also have to play some music and respond to input, leaving it +with around 80% for the graphics. We can then give this group a runtime +of 0.8 * 0.04s = 0.032s. + +This way the graphics group will have a 0.04s period with a 0.032s runtime +limit. + +Now if the audio thread needs to refill the DMA buffer every 0.005s, but +needs only about 3% CPU time to do so, it can do with a 0.03 * 0.005s += 0.00015s. + + +The Interface: + +system wide: + +/proc/sys/kernel/sched_rt_period_ms +/proc/sys/kernel/sched_rt_runtime_us + +CONFIG_FAIR_USER_SCHED + +/sys/kernel/uids/<uid>/cpu_rt_runtime_us + +or + +CONFIG_FAIR_CGROUP_SCHED + +/cgroup/<cgroup>/cpu.rt_runtime_us + +[ time is specified in us because the interface is s32; this gives an + operating range of ~35m to 1us ] + +The period takes values in [ 1, INT_MAX ], runtime in [ -1, INT_MAX - 1 ]. + +A runtime of -1 specifies runtime == period, ie. no limit. + +New groups get the period from /proc/sys/kernel/sched_rt_period_us and +a runtime of 0. + +Settings are constrained to: + + \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period + +in order to keep the configuration schedulable. diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index c815c52..4cfc788 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -16,8 +16,9 @@ Rules on what kind of patches are accepted, and which ones are not, into the race can be exploited is also provided. - It cannot contain any "trivial" fixes in it (spelling changes, whitespace cleanups, etc). - - It must be accepted by the relevant subsystem maintainer. - It must follow the Documentation/SubmittingPatches rules. + - It or an equivalent fix must already exist in Linus' tree. Quote the + respective commit ID in Linus' tree in your patch submission to -stable. Procedure for submitting patches to the -stable tree: @@ -28,7 +29,9 @@ Procedure for submitting patches to the -stable tree: queue, or a NAK if the patch is rejected. This response might take a few days, according to the developer's schedules. - If accepted, the patch will be added to the -stable queue, for review by - other developers. + other developers and by the relevant subsystem maintainer. + - If the stable@kernel.org address is added to a patch, when it goes into + Linus's tree it will automatically be emailed to the stable team. - Security patches should not be sent to this alias, but instead to the documented security@kernel.org address. diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index dc8801d..276a7e6 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -29,7 +29,7 @@ show up in /proc/sys/kernel: - java-interpreter [ binfmt_java, obsolete ] - kstack_depth_to_print [ X86 only ] - l2cr [ PPC only ] -- modprobe ==> Documentation/kmod.txt +- modprobe ==> Documentation/debugging-modules.txt - msgmax - msgmnb - msgmni diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 6a8469f..f40e092 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -8,7 +8,7 @@ 7 -> Leadtek Winfast USB II (em2800) 8 -> Kworld USB2800 (em2800) 9 -> Pinnacle Dazzle DVC 90/DVC 100 (em2820/em2840) [2304:0207,2304:021a] - 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500] + 10 -> Hauppauge WinTV HVR 900 (em2880) [2040:6500,2040:6502] 11 -> Terratec Hybrid XS (em2880) [0ccd:0042] 12 -> Kworld PVR TV 2800 RF (em2820/em2840) 13 -> Terratec Prodigy XS (em2880) [0ccd:0047] diff --git a/Documentation/video4linux/CARDLIST.saa7134 b/Documentation/video4linux/CARDLIST.saa7134 index 5d3b6b4d..0424901 100644 --- a/Documentation/video4linux/CARDLIST.saa7134 +++ b/Documentation/video4linux/CARDLIST.saa7134 @@ -92,9 +92,9 @@ 91 -> AVerMedia A169 B [1461:7360] 92 -> AVerMedia A169 B1 [1461:6360] 93 -> Medion 7134 Bridge #2 [16be:0005] - 94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [5168:3306,5168:3502,4e42:3502] + 94 -> LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB [5168:3306,5168:3502,5168:3307,4e42:3502] 95 -> LifeView FlyVIDEO3000 (NTSC) [5169:0138] - 96 -> Medion Md8800 Quadro [16be:0007,16be:0008] + 96 -> Medion Md8800 Quadro [16be:0007,16be:0008,16be:000d] 97 -> LifeView FlyDVB-S /Acorp TV134DS [5168:0300,4e42:0300] 98 -> Proteus Pro 2309 [0919:2003] 99 -> AVerMedia TV Hybrid A16AR [1461:2c00] @@ -129,3 +129,5 @@ 128 -> Beholder BeholdTV Columbus TVFM [0000:5201] 129 -> Beholder BeholdTV 607 / BeholdTV 609 [5ace:6070,5ace:6071,5ace:6072,5ace:6073,5ace:6090,5ace:6091,5ace:6092,5ace:6093] 130 -> Beholder BeholdTV M6 / BeholdTV M6 Extra [5ace:6190,5ace:6193] +131 -> Twinhan Hybrid DTV-DVB 3056 PCI [1822:0022] +132 -> Genius TVGO AM11MCE diff --git a/Documentation/video4linux/zr364xx.txt b/Documentation/video4linux/zr364xx.txt index 4d9a0c3..5c81e3a 100644 --- a/Documentation/video4linux/zr364xx.txt +++ b/Documentation/video4linux/zr364xx.txt @@ -25,7 +25,7 @@ modprobe zr364xx debug=X mode=Y - debug : set to 1 to enable verbose debug messages - mode : 0 = 320x240, 1 = 160x120, 2 = 640x480 You can then use the camera with V4L2 compatible applications, for example Ekiga. -To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1 count=1 +To capture a single image, try this: dd if=/dev/video0 of=test.jpg bs=1M count=1 links : http://mxhaard.free.fr/ (support for many others cams including some Aiptek PocketDV) @@ -63,3 +63,5 @@ Vendor Product Distributor Model 0x06d6 0x0034 Trust Powerc@m 750 0x0a17 0x0062 Pentax Optio 50L 0x06d6 0x003b Trust Powerc@m 970Z +0x0a17 0x004e Pentax Optio 50 +0x041e 0x405d Creative DiVi CAM 516 diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c index 7123fee..22d7e3e 100644 --- a/Documentation/vm/slabinfo.c +++ b/Documentation/vm/slabinfo.c @@ -1123,7 +1123,7 @@ void read_slab_dir(void) char *t; int count; - if (chdir("/sys/kernel/slab")) + if (chdir("/sys/kernel/slab") && chdir("/sys/slab")) fatal("SYSFS support for SLUB not active\n"); dir = opendir("."); |
