diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/DocBook/Makefile | 2 | ||||
| -rw-r--r-- | Documentation/DocBook/w1.tmpl | 101 | ||||
| -rw-r--r-- | Documentation/connector/cn_test.c | 2 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt | 61 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/spmi/spmi.txt | 41 | ||||
| -rw-r--r-- | Documentation/w1/masters/ds2490 | 2 | ||||
| -rw-r--r-- | Documentation/w1/w1.netlink | 8 |
8 files changed, 211 insertions, 10 deletions
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile index 0f9c6ff..8d96ebf 100644 --- a/Documentation/DocBook/Makefile +++ b/Documentation/DocBook/Makefile @@ -14,7 +14,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \ genericirq.xml s390-drivers.xml uio-howto.xml scsi.xml \ 80211.xml debugobjects.xml sh.xml regulator.xml \ alsa-driver-api.xml writing-an-alsa-driver.xml \ - tracepoint.xml drm.xml media_api.xml + tracepoint.xml drm.xml media_api.xml w1.xml include $(srctree)/Documentation/DocBook/media/Makefile diff --git a/Documentation/DocBook/w1.tmpl b/Documentation/DocBook/w1.tmpl new file mode 100644 index 0000000..b0228d4 --- /dev/null +++ b/Documentation/DocBook/w1.tmpl @@ -0,0 +1,101 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN" + "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []> + +<book id="w1id"> + <bookinfo> + <title>W1: Dallas' 1-wire bus</title> + + <authorgroup> + <author> + <firstname>David</firstname> + <surname>Fries</surname> + <affiliation> + <address> + <email>David@Fries.net</email> + </address> + </affiliation> + </author> + + </authorgroup> + + <copyright> + <year>2013</year> + <!-- + <holder></holder> + --> + </copyright> + + <legalnotice> + <para> + This documentation is free software; you can redistribute + it and/or modify it under the terms of the GNU General Public + License version 2. + </para> + + <para> + This program is distributed in the hope that it will be + useful, but WITHOUT ANY WARRANTY; without even the implied + warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + For more details see the file COPYING in the source + distribution of Linux. + </para> + </legalnotice> + </bookinfo> + + <toc></toc> + + <chapter id="w1_internal"> + <title>W1 API internal to the kernel</title> + + <sect1 id="w1_internal_api"> + <title>W1 API internal to the kernel</title> + <sect2 id="w1.h"> + <title>drivers/w1/w1.h</title> + <para>W1 core functions.</para> +!Idrivers/w1/w1.h + </sect2> + + <sect2 id="w1.c"> + <title>drivers/w1/w1.c</title> + <para>W1 core functions.</para> +!Idrivers/w1/w1.c + </sect2> + + <sect2 id="w1_family.h"> + <title>drivers/w1/w1_family.h</title> + <para>Allows registering device family operations.</para> +!Idrivers/w1/w1_family.h + </sect2> + + <sect2 id="w1_family.c"> + <title>drivers/w1/w1_family.c</title> + <para>Allows registering device family operations.</para> +!Edrivers/w1/w1_family.c + </sect2> + + <sect2 id="w1_int.c"> + <title>drivers/w1/w1_int.c</title> + <para>W1 internal initialization for master devices.</para> +!Edrivers/w1/w1_int.c + </sect2> + + <sect2 id="w1_netlink.h"> + <title>drivers/w1/w1_netlink.h</title> + <para>W1 external netlink API structures and commands.</para> +!Idrivers/w1/w1_netlink.h + </sect2> + + <sect2 id="w1_io.c"> + <title>drivers/w1/w1_io.c</title> + <para>W1 input/output.</para> +!Edrivers/w1/w1_io.c +!Idrivers/w1/w1_io.c + </sect2> + + </sect1> + + + </chapter> + +</book> diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c index adcca03..d12cc94 100644 --- a/Documentation/connector/cn_test.c +++ b/Documentation/connector/cn_test.c @@ -145,7 +145,7 @@ static void cn_test_timer_func(unsigned long __data) memcpy(m + 1, data, m->len); - cn_netlink_send(m, 0, GFP_ATOMIC); + cn_netlink_send(m, 0, 0, GFP_ATOMIC); kfree(m); } diff --git a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt index 68ba372..fabdf64 100644 --- a/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/misc/allwinner,sunxi-sid.txt @@ -1,12 +1,12 @@ Allwinner sunxi-sid Required properties: -- compatible: "allwinner,sun4i-sid" or "allwinner,sun7i-a20-sid". +- compatible: "allwinner,sun4i-a10-sid" or "allwinner,sun7i-a20-sid" - reg: Should contain registers location and length Example for sun4i: sid@01c23800 { - compatible = "allwinner,sun4i-sid"; + compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10> }; diff --git a/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt new file mode 100644 index 0000000..715d099 --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/qcom,spmi-pmic-arb.txt @@ -0,0 +1,61 @@ +Qualcomm SPMI Controller (PMIC Arbiter) + +The SPMI PMIC Arbiter is found on the Snapdragon 800 Series. It is an SPMI +controller with wrapping arbitration logic to allow for multiple on-chip +devices to control a single SPMI master. + +The PMIC Arbiter can also act as an interrupt controller, providing interrupts +to slave devices. + +See spmi.txt for the generic SPMI controller binding requirements for child +nodes. + +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for +generic interrupt controller binding documentation. + +Required properties: +- compatible : should be "qcom,spmi-pmic-arb". +- reg-names : must contain: + "core" - core registers + "intr" - interrupt controller registers + "cnfg" - configuration registers +- reg : address + size pairs describing the PMIC arb register sets; order must + correspond with the order of entries in reg-names +- #address-cells : must be set to 2 +- #size-cells : must be set to 0 +- qcom,ee : indicates the active Execution Environment identifier (0-5) +- qcom,channel : which of the PMIC Arb provided channels to use for accesses (0-5) +- interrupts : interrupt list for the PMIC Arb controller, must contain a + single interrupt entry for the peripheral interrupt +- interrupt-names : corresponding interrupt names for the interrupts + listed in the 'interrupts' property, must contain: + "periph_irq" - summary interrupt for PMIC peripherals +- interrupt-controller : boolean indicator that the PMIC arbiter is an interrupt controller +- #interrupt-cells : must be set to 4. Interrupts are specified as a 4-tuple: + cell 1: slave ID for the requested interrupt (0-15) + cell 2: peripheral ID for requested interrupt (0-255) + cell 3: the requested peripheral interrupt (0-7) + cell 4: interrupt flags indicating level-sense information, as defined in + dt-bindings/interrupt-controller/irq.h + +Example: + + spmi { + compatible = "qcom,spmi-pmic-arb"; + reg-names = "core", "intr", "cnfg"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + + interrupt-names = "periph_irq"; + interrupts = <0 190 0>; + + qcom,ee = <0>; + qcom,channel = <0>; + + #address-cells = <2>; + #size-cells = <0>; + + interrupt-controller; + #interrupt-cells = <4>; + }; diff --git a/Documentation/devicetree/bindings/spmi/spmi.txt b/Documentation/devicetree/bindings/spmi/spmi.txt new file mode 100644 index 0000000..462a42f --- /dev/null +++ b/Documentation/devicetree/bindings/spmi/spmi.txt @@ -0,0 +1,41 @@ +System Power Management Interface (SPMI) Controller + +This document defines a generic set of bindings for use by SPMI controllers. A +controller is modelled in device tree as a node with zero or more child nodes, +each representing a unique slave on the bus. + +Required properties: +- #address-cells : must be set to 2 +- #size-cells : must be set to 0 + +Child nodes: + +An SPMI controller node can contain zero or more child nodes representing slave +devices on the bus. Child 'reg' properties are specified as an address, type +pair. The address must be in the range 0-15 (4 bits). The type must be one of +SPMI_USID (0) or SPMI_GSID (1) for Unique Slave ID or Group Slave ID respectively. +These are the identifiers "statically assigned by the system integrator", as +per the SPMI spec. + +Each child node must have one and only one 'reg' entry of type SPMI_USID. + +#include <dt-bindings/spmi/spmi.h> + + spmi@.. { + compatible = "..."; + reg = <...>; + + #address-cells = <2>; + #size-cells <0>; + + child@0 { + compatible = "..."; + reg = <0 SPMI_USID>; + }; + + child@7 { + compatible = "..."; + reg = <7 SPMI_USID + 3 SPMI_GSID>; + }; + }; diff --git a/Documentation/w1/masters/ds2490 b/Documentation/w1/masters/ds2490 index 28176de..3e09115 100644 --- a/Documentation/w1/masters/ds2490 +++ b/Documentation/w1/masters/ds2490 @@ -21,8 +21,6 @@ Notes and limitations. - The weak pullup current is a minimum of 0.9mA and maximum of 6.0mA. - The 5V strong pullup is supported with a minimum of 5.9mA and a maximum of 30.4 mA. (From DS2490.pdf) -- While the ds2490 supports a hardware search the code doesn't take - advantage of it (in tested case it only returned first device). - The hardware will detect when devices are attached to the bus on the next bus (reset?) operation, however only a message is printed as the core w1 code doesn't make use of the information. Connecting diff --git a/Documentation/w1/w1.netlink b/Documentation/w1/w1.netlink index f59a319..927a52c 100644 --- a/Documentation/w1/w1.netlink +++ b/Documentation/w1/w1.netlink @@ -5,8 +5,8 @@ Message types. ============= There are three types of messages between w1 core and userspace: -1. Events. They are generated each time new master or slave device - found either due to automatic or requested search. +1. Events. They are generated each time a new master or slave device + is found either due to automatic or requested search. 2. Userspace commands. 3. Replies to userspace commands. @@ -131,7 +131,7 @@ of the w1_netlink_cmd structure and cn_msg.len will be equal to the sum of the sizeof(struct w1_netlink_msg) and sizeof(struct w1_netlink_cmd). If reply is generated for master or root command (which do not have w1_netlink_cmd attached), reply will contain only cn_msg and w1_netlink_msg -structires. +structures. w1_netlink_msg.status field will carry positive error value (EINVAL for example) or zero in case of success. @@ -160,7 +160,7 @@ procedure is started to select given device. Then all requested in w1_netlink_msg operations are performed one by one. If command requires reply (like read command) it is sent on command completion. -When all commands (w1_netlink_cmd) are processed muster device is unlocked +When all commands (w1_netlink_cmd) are processed master device is unlocked and next w1_netlink_msg header processing started. |
