diff options
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/devicetree/bindings/net/ethernet.txt | 24 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/power/domain-idle-state.txt | 33 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/power/power_domain.txt | 43 | ||||
| -rw-r--r-- | Documentation/networking/nf_conntrack-sysctl.txt | 7 | ||||
| -rw-r--r-- | Documentation/power/devices.txt | 14 |
5 files changed, 114 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt index e1d7681..0515095 100644 --- a/Documentation/devicetree/bindings/net/ethernet.txt +++ b/Documentation/devicetree/bindings/net/ethernet.txt @@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers: - max-speed: number, specifies maximum speed in Mbit/s supported by the device; - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than the maximum frame size (there's contradiction in ePAPR). -- phy-mode: string, operation mode of the PHY interface; supported values are - "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id", - "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a - de-facto standard property; +- phy-mode: string, operation mode of the PHY interface. This is now a de-facto + standard property; supported values are: + * "mii" + * "gmii" + * "sgmii" + * "qsgmii" + * "tbi" + * "rev-mii" + * "rmii" + * "rgmii" (RX and TX delays are added by the MAC when required) + * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the + MAC should not add the RX or TX delays in this case) + * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC + should not add an RX delay in this case) + * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC + should not add an TX delay in this case) + * "rtbi" + * "smii" + * "xgmii" + * "trgmii" - phy-connection-type: the same as "phy-mode" property but described in ePAPR; - phy-handle: phandle, specifies a reference to a node representing a PHY device; this property is described in ePAPR and so preferred; diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.txt b/Documentation/devicetree/bindings/power/domain-idle-state.txt new file mode 100644 index 0000000..eefc7ed --- /dev/null +++ b/Documentation/devicetree/bindings/power/domain-idle-state.txt @@ -0,0 +1,33 @@ +PM Domain Idle State Node: + +A domain idle state node represents the state parameters that will be used to +select the state when there are no active components in the domain. + +The state node has the following parameters - + +- compatible: + Usage: Required + Value type: <string> + Definition: Must be "domain-idle-state". + +- entry-latency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency in + microseconds required to enter the idle state. + The exit-latency-us duration may be guaranteed + only after entry-latency-us has passed. + +- exit-latency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing worst case latency + in microseconds required to exit the idle state. + +- min-residency-us + Usage: Required + Value type: <prop-encoded-array> + Definition: u32 value representing minimum residency duration + in microseconds after which the idle state will yield + power benefits after overcoming the overhead in entering +i the idle state. diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 025b5e7d..723e1ad 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -29,6 +29,15 @@ Optional properties: specified by this binding. More details about power domain specifier are available in the next section. +- domain-idle-states : A phandle of an idle-state that shall be soaked into a + generic domain power state. The idle state definitions are + compatible with domain-idle-state specified in [1]. + The domain-idle-state property reflects the idle state of this PM domain and + not the idle states of the devices or sub-domains in the PM domain. Devices + and sub-domains have their own idle-states independent of the parent + domain's idle states. In the absence of this property, the domain would be + considered as capable of being powered-on or powered-off. + Example: power: power-controller@12340000 { @@ -59,6 +68,38 @@ The nodes above define two power controllers: 'parent' and 'child'. Domains created by the 'child' power controller are subdomains of '0' power domain provided by the 'parent' power controller. +Example 3: + parent: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <0>; + domain-idle-states = <&DOMAIN_RET>, <&DOMAIN_PWR_DN>; + }; + + child: power-controller@12341000 { + compatible = "foo,power-controller"; + reg = <0x12341000 0x1000>; + power-domains = <&parent 0>; + #power-domain-cells = <0>; + domain-idle-states = <&DOMAIN_PWR_DN>; + }; + + DOMAIN_RET: state@0 { + compatible = "domain-idle-state"; + reg = <0x0>; + entry-latency-us = <1000>; + exit-latency-us = <2000>; + min-residency-us = <10000>; + }; + + DOMAIN_PWR_DN: state@1 { + compatible = "domain-idle-state"; + reg = <0x1>; + entry-latency-us = <5000>; + exit-latency-us = <8000>; + min-residency-us = <7000>; + }; + ==PM domain consumers== Required properties: @@ -76,3 +117,5 @@ Example: The node above defines a typical PM domain consumer device, which is located inside a PM domain with index 0 of a power controller represented by a node with the label "power". + +[1]. Documentation/devicetree/bindings/power/domain-idle-state.txt diff --git a/Documentation/networking/nf_conntrack-sysctl.txt b/Documentation/networking/nf_conntrack-sysctl.txt index 399e4e8..433b672 100644 --- a/Documentation/networking/nf_conntrack-sysctl.txt +++ b/Documentation/networking/nf_conntrack-sysctl.txt @@ -62,10 +62,13 @@ nf_conntrack_generic_timeout - INTEGER (seconds) protocols. nf_conntrack_helper - BOOLEAN - 0 - disabled - not 0 - enabled (default) + 0 - disabled (default) + not 0 - enabled Enable automatic conntrack helper assignment. + If disabled it is required to set up iptables rules to assign + helpers to connections. See the CT target description in the + iptables-extensions(8) man page for further information. nf_conntrack_icmp_timeout - INTEGER (seconds) default 30 diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 8ba6625..73ddea3 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -607,7 +607,9 @@ individually. Instead, a set of devices sharing a power resource can be put into a low-power state together at the same time by turning off the shared power resource. Of course, they also need to be put into the full-power state together, by turning the shared power resource on. A set of devices with this -property is often referred to as a power domain. +property is often referred to as a power domain. A power domain may also be +nested inside another power domain. The nested domain is referred to as the +sub-domain of the parent domain. Support for power domains is provided through the pm_domain field of struct device. This field is a pointer to an object of type struct dev_pm_domain, @@ -629,6 +631,16 @@ support for power domains into subsystem-level callbacks, for example by modifying the platform bus type. Other platforms need not implement it or take it into account in any way. +Devices may be defined as IRQ-safe which indicates to the PM core that their +runtime PM callbacks may be invoked with disabled interrupts (see +Documentation/power/runtime_pm.txt for more information). If an IRQ-safe +device belongs to a PM domain, the runtime PM of the domain will be +disallowed, unless the domain itself is defined as IRQ-safe. However, it +makes sense to define a PM domain as IRQ-safe only if all the devices in it +are IRQ-safe. Moreover, if an IRQ-safe domain has a parent domain, the runtime +PM of the parent is only allowed if the parent itself is IRQ-safe too with the +additional restriction that all child domains of an IRQ-safe parent must also +be IRQ-safe. Device Low Power (suspend) States --------------------------------- |
