diff options
Diffstat (limited to 'Documentation')
28 files changed, 290 insertions, 39 deletions
diff --git a/Documentation/CodeOfConflict b/Documentation/CodeOfConflict new file mode 100644 index 0000000..1684d0b --- /dev/null +++ b/Documentation/CodeOfConflict @@ -0,0 +1,27 @@ +Code of Conflict +---------------- + +The Linux kernel development effort is a very personal process compared +to "traditional" ways of developing software. Your code and ideas +behind it will be carefully reviewed, often resulting in critique and +criticism. The review will almost always require improvements to the +code before it can be included in the kernel. Know that this happens +because everyone involved wants to see the best possible solution for +the overall success of Linux. This development process has been proven +to create the most robust operating system kernel ever, and we do not +want to do anything to cause the quality of submission and eventual +result to ever decrease. + +If however, anyone feels personally abused, threatened, or otherwise +uncomfortable due to this process, that is not acceptable. If so, +please contact the Linux Foundation's Technical Advisory Board at +<tab@lists.linux-foundation.org>, or the individual members, and they +will work to resolve the issue to the best of their ability. For more +information on who is on the Technical Advisory Board and what their +role is, please see: + http://www.linuxfoundation.org/programs/advisory-councils/tab + +As a reviewer of code, please strive to keep things civil and focused on +the technical issues involved. We are all humans, and frustrations can +be high on both sides of the process. Try to keep in mind the immortal +words of Bill and Ted, "Be excellent to each other." diff --git a/Documentation/cgroups/unified-hierarchy.txt b/Documentation/cgroups/unified-hierarchy.txt index 71daa35..eb102fb 100644 --- a/Documentation/cgroups/unified-hierarchy.txt +++ b/Documentation/cgroups/unified-hierarchy.txt @@ -404,8 +404,8 @@ supported and the interface files "release_agent" and be understood as an underflow into the highest possible value, -2 or -10M etc. do not work, so it's not consistent. - memory.low, memory.high, and memory.max will use the string - "infinity" to indicate and set the highest possible value. + memory.low, memory.high, and memory.max will use the string "max" to + indicate and set the highest possible value. 5. Planned Changes diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt index f4445e5..1e09703 100644 --- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt +++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt @@ -22,6 +22,8 @@ Optional Properties: - pclkN, clkN: Pairs of parent of input clock and input clock to the devices in this power domain. Maximum of 4 pairs (N = 0 to 3) are supported currently. +- power-domains: phandle pointing to the parent power domain, for more details + see Documentation/devicetree/bindings/power/power_domain.txt Node of a device using power domains must have a power-domains property defined with a phandle to respective power domain. diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt index d70ec35..8d27f6b 100644 --- a/Documentation/devicetree/bindings/arm/sti.txt +++ b/Documentation/devicetree/bindings/arm/sti.txt @@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties: Required root node property: compatible = "st,stih407"; +Boards with the ST STiH410 SoC shall have the following properties: +Required root node property: +compatible = "st,stih410"; + Boards with the ST STiH418 SoC shall have the following properties: Required root node property: compatible = "st,stih418"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt index 52d37fd..ce4311d 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt @@ -7,6 +7,7 @@ Required properties: - "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC - reg : Should contain I2C/HS-I2C registers location and length - interrupts : Should contain I2C/HS-I2C interrupt +- clocks : Should contain the I2C/HS-I2C clock specifier Optional properties: - clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz. diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt index 33df393..8db3238 100644 --- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt +++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt @@ -27,6 +27,8 @@ property is used. - amd,serdes-cdr-rate: CDR rate speed selection - amd,serdes-pq-skew: PQ (data sampling) skew - amd,serdes-tx-amp: TX amplitude boost +- amd,serdes-dfe-tap-config: DFE taps available to run +- amd,serdes-dfe-tap-enable: DFE taps to enable Example: xgbe_phy@e1240800 { @@ -41,4 +43,6 @@ Example: amd,serdes-cdr-rate = <2>, <2>, <7>; amd,serdes-pq-skew = <10>, <10>, <30>; amd,serdes-tx-amp = <15>, <15>, <10>; + amd,serdes-dfe-tap-config = <3>, <3>, <1>; + amd,serdes-dfe-tap-enable = <0>, <0>, <127>; }; diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt index cfcc527..6151999 100644 --- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in APM X-Gene SoC. Required properties for all the ethernet interfaces: -- compatible: Should be "apm,xgene-enet" +- compatible: Should state binding information from the following list, + - "apm,xgene-enet": RGMII based 1G interface + - "apm,xgene1-sgenet": SGMII based 1G interface + - "apm,xgene1-xgenet": XFI based 10G interface - reg: Address and length of the register set for the device. It contains the information of registers in the same order as described by reg-names - reg-names: Should contain the register set names diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt index e124847..f0b4cd7 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.txt +++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt @@ -19,7 +19,9 @@ the parent DSA node. The maximum number of allowed child nodes is 4 (DSA_MAX_SWITCHES). Each of these switch child nodes should have the following required properties: -- reg : Describes the switch address on the MII bus +- reg : Contains two fields. The first one describes the + address on the MII bus. The second is the switch + number that must be unique in cascaded configurations - #address-cells : Must be 1 - #size-cells : Must be 0 diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt index 98c1667..0f8ed37 100644 --- a/Documentation/devicetree/bindings/power/power_domain.txt +++ b/Documentation/devicetree/bindings/power/power_domain.txt @@ -19,6 +19,16 @@ Required properties: providing multiple PM domains (e.g. power controllers), but can be any value as specified by device tree binding documentation of particular provider. +Optional properties: + - power-domains : A phandle and PM domain specifier as defined by bindings of + the power controller specified by phandle. + Some power domains might be powered from another power domain (or have + other hardware specific dependencies). For representing such dependency + a standard PM domain consumer binding is used. When provided, all domains + created by the given provider should be subdomains of the domain + specified by this binding. More details about power domain specifier are + available in the next section. + Example: power: power-controller@12340000 { @@ -30,6 +40,25 @@ Example: The node above defines a power controller that is a PM domain provider and expects one cell as its phandle argument. +Example 2: + + parent: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12340000 0x1000>; + #power-domain-cells = <1>; + }; + + child: power-controller@12340000 { + compatible = "foo,power-controller"; + reg = <0x12341000 0x1000>; + power-domains = <&parent 0>; + #power-domain-cells = <1>; + }; + +The nodes above define two power controllers: 'parent' and 'child'. +Domains created by the 'child' power controller are subdomains of '0' power +domain provided by the 'parent' power controller. + ==PM domain consumers== Required properties: diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/8250.txt index 91d5ab0..91d5ab0 100644 --- a/Documentation/devicetree/bindings/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/serial/8250.txt diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt new file mode 100644 index 0000000..ebcbb62 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt @@ -0,0 +1,19 @@ +ETRAX FS UART + +Required properties: +- compatible : "axis,etraxfs-uart" +- reg: offset and length of the register set for the device. +- interrupts: device interrupt + +Optional properties: +- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD + line respectively. + +Example: + +serial@b00260000 { + compatible = "axis,etraxfs-uart"; + reg = <0xb0026000 0x1000>; + interrupts = <68>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt index 7f76214..289c40e 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt @@ -21,6 +21,18 @@ Optional properties: - reg-io-width : the size (in bytes) of the IO accesses that should be performed on the device. If this property is not present then single byte accesses are used. +- dcd-override : Override the DCD modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- dsr-override : Override the DTS modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- cts-override : Override the CTS modem status signal. This signal will always + be reported as active instead of being obtained from the modem status + register. Define this if your serial port does not use this pin. +- ri-override : Override the RI modem status signal. This signal will always be + reported as inactive instead of being obtained from the modem status register. + Define this if your serial port does not use this pin. Example: @@ -31,6 +43,10 @@ Example: interrupts = <10>; reg-shift = <2>; reg-io-width = <4>; + dcd-override; + dsr-override; + cts-override; + ri-override; }; Example with one clock: diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index aad527b..523341a 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -2,11 +2,21 @@ (CSPI/eCSPI) for i.MX Required properties: -- compatible : Should be "fsl,<soc>-cspi" or "fsl,<soc>-ecspi" +- compatible : + - "fsl,imx1-cspi" for SPI compatible with the one integrated on i.MX1 + - "fsl,imx21-cspi" for SPI compatible with the one integrated on i.MX21 + - "fsl,imx27-cspi" for SPI compatible with the one integrated on i.MX27 + - "fsl,imx31-cspi" for SPI compatible with the one integrated on i.MX31 + - "fsl,imx35-cspi" for SPI compatible with the one integrated on i.MX35 + - "fsl,imx51-ecspi" for SPI compatible with the one integrated on i.MX51 - reg : Offset and length of the register set for the device - interrupts : Should contain CSPI/eCSPI interrupt - fsl,spi-num-chipselects : Contains the number of the chipselect - cs-gpios : Specifies the gpio pins to be used for chipselects. +- clocks : Clock specifiers for both ipg and per clocks. +- clock-names : Clock names should include both "ipg" and "per" +See the clock consumer binding, + Documentation/devicetree/bindings/clock/clock-bindings.txt - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt index e2c88df..5c09077 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt @@ -33,6 +33,11 @@ Optional properties: nodes. If unspecified, a single SPI device without a chip select can be used. +- dmas: Two DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt +- dma-names: Names for the dma channels, if present. There must be at + least one channel named "tx" for transmit and named "rx" for + receive. SPI slave nodes must be children of the SPI master node and can contain properties described in Documentation/devicetree/bindings/spi/spi-bus.txt @@ -51,6 +56,9 @@ Example: clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + dmas = <&blsp1_bam 13>, <&blsp1_bam 12>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; pinctrl-0 = <&spi8_default>; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index cbbe16e..70af78a 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -16,6 +16,12 @@ Optional property: in big endian mode, otherwise in native mode(same with CPU), for more detail please see: Documentation/devicetree/bindings/regmap/regmap.txt. +Optional SPI slave node properties: +- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip + select and the start of clock signal, at the start of a transfer. +- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock + signal and deactivating chip select, at the end of a transfer. + Example: dspi0@4002c000 { @@ -43,6 +49,8 @@ dspi0@4002c000 { reg = <0>; linux,modalias = "m25p80"; modal = "at26df081a"; + fsl,spi-cs-sck-delay = <100>; + fsl,spi-sck-cs-delay = <50>; }; }; diff --git a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt index c7dd50f..e02fbf1 100644 --- a/Documentation/devicetree/bindings/spi/spi-img-spfi.txt +++ b/Documentation/devicetree/bindings/spi/spi-img-spfi.txt @@ -14,6 +14,7 @@ Required properties: - dma-names: Must include the following entries: - rx - tx +- cs-gpios: Must specify the GPIOs used for chipselect lines. - #address-cells: Must be 1. - #size-cells: Must be 0. diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt index 467dec4..0c491bd 100644 --- a/Documentation/devicetree/bindings/spi/spi-rockchip.txt +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -24,6 +24,9 @@ Optional Properties: - dmas: DMA specifiers for tx and rx dma. See the DMA client binding, Documentation/devicetree/bindings/dma/dma.txt - dma-names: DMA request names should include "tx" and "rx" if present. +- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling + Rx data (may need to be fine tuned for high capacitance lines). + No delay (0) by default. Example: @@ -33,6 +36,7 @@ Example: reg = <0xff110000 0x1000>; dmas = <&pdma1 11>, <&pdma1 12>; dma-names = "tx", "rx"; + rx-sample-delay-ns = <10>; #address-cells = <1>; #size-cells = <0>; interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt index 56742bc..7d44eae 100644 --- a/Documentation/devicetree/bindings/submitting-patches.txt +++ b/Documentation/devicetree/bindings/submitting-patches.txt @@ -12,6 +12,9 @@ I. For patch submitters devicetree@vger.kernel.org + and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify + all of the DT maintainers. + 3) The Documentation/ portion of the patch should come in the series before the code implementing the binding. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 389ca13..fae26d0 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -20,6 +20,7 @@ amlogic Amlogic, Inc. ams AMS AG amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) +arasan Arasan Chip Systems arm ARM Ltd. armadeus ARMadeus Systems SARL asahi-kasei Asahi Kasei Corp. @@ -27,6 +28,7 @@ atmel Atmel Corporation auo AU Optronics Corporation avago Avago Technologies avic Shanghai AVIC Optoelectronics Co., Ltd. +axis Axis Communications AB bosch Bosch Sensortec GmbH brcm Broadcom Corporation buffalo Buffalo, Inc. diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt index f90e294..a4d8697 100644 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt @@ -26,6 +26,11 @@ Optional properties: - atmel,disable : Should be present if you want to disable the watchdog. - atmel,idle-halt : Should be present if you want to stop the watchdog when entering idle state. + CAUTION: This property should be used with care, it actually makes the + watchdog not counting when the CPU is in idle state, therefore the + watchdog reset time depends on mean CPU usage and will not reset at all + if the CPU stop working while it is in idle state, which is probably + not what you want. - atmel,dbg-halt : Should be present if you want to stop the watchdog when entering debug state. diff --git a/Documentation/filesystems/dlmfs.txt b/Documentation/filesystems/dlmfs.txt index 1b528b2..fcf4d50 100644 --- a/Documentation/filesystems/dlmfs.txt +++ b/Documentation/filesystems/dlmfs.txt @@ -5,8 +5,8 @@ system. dlmfs is built with OCFS2 as it requires most of its infrastructure. -Project web page: http://oss.oracle.com/projects/ocfs2 -Tools web page: http://oss.oracle.com/projects/ocfs2-tools +Project web page: http://ocfs2.wiki.kernel.org +Tools web page: https://github.com/markfasheh/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ All code copyright 2005 Oracle except when otherwise noted. diff --git a/Documentation/filesystems/ocfs2.txt b/Documentation/filesystems/ocfs2.txt index 28f8c08..4c49e54 100644 --- a/Documentation/filesystems/ocfs2.txt +++ b/Documentation/filesystems/ocfs2.txt @@ -8,8 +8,8 @@ also make it attractive for non-clustered use. You'll want to install the ocfs2-tools package in order to at least get "mount.ocfs2" and "ocfs2_hb_ctl". -Project web page: http://oss.oracle.com/projects/ocfs2 -Tools web page: http://oss.oracle.com/projects/ocfs2-tools +Project web page: http://ocfs2.wiki.kernel.org +Tools git tree: https://github.com/markfasheh/ocfs2-tools OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ All code copyright 2005 Oracle except when otherwise noted. diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt index a63e5e0..92ae734 100644 --- a/Documentation/input/alps.txt +++ b/Documentation/input/alps.txt @@ -114,6 +114,9 @@ ALPS Absolute Mode - Protocol Version 2 byte 4: 0 y6 y5 y4 y3 y2 y1 y0 byte 5: 0 z6 z5 z4 z3 z2 z1 z0 +Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for +the DualPoint Stick. + Dualpoint device -- interleaved packet format --------------------------------------------- @@ -127,6 +130,11 @@ Dualpoint device -- interleaved packet format byte 7: 0 y6 y5 y4 y3 y2 y1 y0 byte 8: 0 z6 z5 z4 z3 z2 z1 z0 +Devices which use the interleaving format normally send standard PS/2 mouse +packets for the DualPoint Stick + ALPS Absolute Mode packets for the +touchpad, switching to the interleaved packet format when both the stick and +the touchpad are used at the same time. + ALPS Absolute Mode - Protocol Version 3 --------------------------------------- diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index c587a96..9670561 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -294,6 +294,12 @@ accordingly. This property does not affect kernel behavior. The kernel does not provide button emulation for such devices but treats them as any other INPUT_PROP_BUTTONPAD device. +INPUT_PROP_ACCELEROMETER +------------------------- +Directional axes on this device (absolute and/or relative x, y, z) represent +accelerometer data. All other axes retain their meaning. A device must not mix +regular directional axes and accelerometer axes on the same event node. + Guidelines: ========== The guidelines below ensure proper single-touch and multi-finger functionality. diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 7b4f59c..b85d000 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -312,9 +312,12 @@ ABS_MT_TOOL_TYPE The type of approaching tool. A lot of kernel drivers cannot distinguish between different tool types, such as a finger or a pen. In such cases, the -event should be omitted. The protocol currently supports MT_TOOL_FINGER and -MT_TOOL_PEN [2]. For type B devices, this event is handled by input core; -drivers should instead use input_mt_report_slot_state(). +event should be omitted. The protocol currently supports MT_TOOL_FINGER, +MT_TOOL_PEN, and MT_TOOL_PALM [2]. For type B devices, this event is handled +by input core; drivers should instead use input_mt_report_slot_state(). +A contact's ABS_MT_TOOL_TYPE may change over time while still touching the +device, because the firmware may not be able to determine which tool is being +used when it first appears. ABS_MT_BLOB_ID diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.txt index 2f9c5a5..8afb29a 100644 --- a/Documentation/power/suspend-and-interrupts.txt +++ b/Documentation/power/suspend-and-interrupts.txt @@ -40,8 +40,10 @@ but also to IPIs and to some other special-purpose interrupts. The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when requesting a special-purpose interrupt. It causes suspend_device_irqs() to -leave the corresponding IRQ enabled so as to allow the interrupt to work all -the time as expected. +leave the corresponding IRQ enabled so as to allow the interrupt to work as +expected during the suspend-resume cycle, but does not guarantee that the +interrupt will wake the system from a suspended state -- for such cases it is +necessary to use enable_irq_wake(). Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one user of it. Thus, if the IRQ is shared, all of the interrupt handlers installed @@ -110,8 +112,9 @@ any special interrupt handling logic for it to work. IRQF_NO_SUSPEND and enable_irq_wake() ------------------------------------- -There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND -flag on the same IRQ. +There are very few valid reasons to use both enable_irq_wake() and the +IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the +same device. First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND interrupts (interrupt handlers are invoked after suspend_device_irqs()) are @@ -120,4 +123,13 @@ handlers are not invoked after suspend_device_irqs()). Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not to individual interrupt handlers, so sharing an IRQ between a system wakeup -interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense. +interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally +make sense. + +In rare cases an IRQ can be shared between a wakeup device driver and an +IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver +must be able to discern spurious IRQs from genuine wakeup events (signalling +the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to +ensure that the IRQ will function as a wakeup source, and must request the IRQ +with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If +these requirements are not met, it is not valid to use IRQF_COND_SUSPEND. diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index d29734b..d1824b3 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -342,12 +342,11 @@ SPI protocol drivers somewhat resemble platform device drivers: .driver = { .name = "CHIP", .owner = THIS_MODULE, + .pm = &CHIP_pm_ops, }, .probe = CHIP_probe, .remove = CHIP_remove, - .suspend = CHIP_suspend, - .resume = CHIP_resume, }; The driver core will automatically attempt to bind this driver to any SPI diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index 3a2f9d5..94f574b 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -15,6 +15,7 @@ #include <unistd.h> #include <stdio.h> #include <stdlib.h> +#include <string.h> #include <getopt.h> #include <fcntl.h> #include <sys/ioctl.h> @@ -34,24 +35,79 @@ static uint32_t mode; static uint8_t bits = 8; static uint32_t speed = 500000; static uint16_t delay; +static int verbose; -static void transfer(int fd) +uint8_t default_tx[] = { + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xF0, 0x0D, +}; + +uint8_t default_rx[ARRAY_SIZE(default_tx)] = {0, }; +char *input_tx; + +static void hex_dump(const void *src, size_t length, size_t line_size, char *prefix) +{ + int i = 0; + const unsigned char *address = src; + const unsigned char *line = address; + unsigned char c; + + printf("%s | ", prefix); + while (length-- > 0) { + printf("%02X ", *address++); + if (!(++i % line_size) || (length == 0 && i % line_size)) { + if (length == 0) { + while (i++ % line_size) + printf("__ "); + } + printf(" | "); /* right close */ + while (line < address) { + c = *line++; + printf("%c", (c < 33 || c == 255) ? 0x2E : c); + } + printf("\n"); + if (length > 0) + printf("%s | ", prefix); + } + } +} + +/* + * Unescape - process hexadecimal escape character + * converts shell input "\x23" -> 0x23 + */ +int unespcape(char *_dst, char *_src, size_t len) +{ + int ret = 0; + char *src = _src; + char *dst = _dst; + unsigned int ch; + + while (*src) { + if (*src == '\\' && *(src+1) == 'x') { + sscanf(src + 2, "%2x", &ch); + src += 4; + *dst++ = (unsigned char)ch; + } else { + *dst++ = *src++; + } + ret++; + } + return ret; +} + +static void transfer(int fd, uint8_t const *tx, uint8_t const *rx, size_t len) { int ret; - uint8_t tx[] = { - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0x40, 0x00, 0x00, 0x00, 0x00, 0x95, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, - 0xDE, 0xAD, 0xBE, 0xEF, 0xBA, 0xAD, - 0xF0, 0x0D, - }; - uint8_t rx[ARRAY_SIZE(tx)] = {0, }; + struct spi_ioc_transfer tr = { .tx_buf = (unsigned long)tx, .rx_buf = (unsigned long)rx, - .len = ARRAY_SIZE(tx), + .len = len, .delay_usecs = delay, .speed_hz = speed, .bits_per_word = bits, @@ -76,12 +132,9 @@ static void transfer(int fd) if (ret < 1) pabort("can't send spi message"); - for (ret = 0; ret < ARRAY_SIZE(tx); ret++) { - if (!(ret % 6)) - puts(""); - printf("%.2X ", rx[ret]); - } - puts(""); + if (verbose) + hex_dump(tx, len, 32, "TX"); + hex_dump(rx, len, 32, "RX"); } static void print_usage(const char *prog) @@ -97,6 +150,8 @@ static void print_usage(const char *prog) " -L --lsb least significant bit first\n" " -C --cs-high chip select active high\n" " -3 --3wire SI/SO signals shared\n" + " -v --verbose Verbose (show tx buffer)\n" + " -p Send data (e.g. \"1234\\xde\\xad\")\n" " -N --no-cs no chip select\n" " -R --ready slave pulls low to pause\n" " -2 --dual dual transfer\n" @@ -121,12 +176,13 @@ static void parse_opts(int argc, char *argv[]) { "no-cs", 0, 0, 'N' }, { "ready", 0, 0, 'R' }, { "dual", 0, 0, '2' }, + { "verbose", 0, 0, 'v' }, { "quad", 0, 0, '4' }, { NULL, 0, 0, 0 }, }; int c; - c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24", lopts, NULL); + c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR24p:v", lopts, NULL); if (c == -1) break; @@ -165,9 +221,15 @@ static void parse_opts(int argc, char *argv[]) case 'N': mode |= SPI_NO_CS; break; + case 'v': + verbose = 1; + break; case 'R': mode |= SPI_READY; break; + case 'p': + input_tx = optarg; + break; case '2': mode |= SPI_TX_DUAL; break; @@ -191,6 +253,9 @@ int main(int argc, char *argv[]) { int ret = 0; int fd; + uint8_t *tx; + uint8_t *rx; + int size; parse_opts(argc, argv); @@ -235,7 +300,17 @@ int main(int argc, char *argv[]) printf("bits per word: %d\n", bits); printf("max speed: %d Hz (%d KHz)\n", speed, speed/1000); - transfer(fd); + if (input_tx) { + size = strlen(input_tx+1); + tx = malloc(size); + rx = malloc(size); + size = unespcape((char *)tx, input_tx, size); + transfer(fd, tx, rx, size); + free(rx); + free(tx); + } else { + transfer(fd, default_tx, default_rx, sizeof(default_tx)); + } close(fd); |
