diff options
Diffstat (limited to 'Documentation')
43 files changed, 544 insertions, 257 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 index 33e96f7..147d4e8 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 +++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 @@ -14,3 +14,11 @@ Description: Show or set the gain boost of the amp, from 0-31 range. 18 = indoors (default) 14 = outdoors + +What /sys/bus/iio/devices/iio:deviceX/noise_level_tripped +Date: May 2017 +KernelVersion: 4.13 +Contact: Matt Ranostay <matt.ranostay@konsulko.com> +Description: + When 1 the noise level is over the trip level and not reporting + valid data diff --git a/Documentation/ABI/testing/sysfs-class-remoteproc b/Documentation/ABI/testing/sysfs-class-remoteproc index d188afe..c3afe9f 100644 --- a/Documentation/ABI/testing/sysfs-class-remoteproc +++ b/Documentation/ABI/testing/sysfs-class-remoteproc @@ -1,6 +1,6 @@ What: /sys/class/remoteproc/.../firmware Date: October 2016 -Contact: Matt Redfearn <matt.redfearn@imgtec.com> +Contact: Matt Redfearn <matt.redfearn@mips.com> Description: Remote processor firmware Reports the name of the firmware currently loaded to the @@ -11,7 +11,7 @@ Description: Remote processor firmware What: /sys/class/remoteproc/.../state Date: October 2016 -Contact: Matt Redfearn <matt.redfearn@imgtec.com> +Contact: Matt Redfearn <matt.redfearn@mips.com> Description: Remote processor state Reports the state of the remote processor, which will be one of: diff --git a/Documentation/ABI/testing/sysfs-kernel-mm-swap b/Documentation/ABI/testing/sysfs-kernel-mm-swap index 587db52..9467201 100644 --- a/Documentation/ABI/testing/sysfs-kernel-mm-swap +++ b/Documentation/ABI/testing/sysfs-kernel-mm-swap @@ -14,13 +14,3 @@ Description: Enable/disable VMA based swap readahead. still used for tmpfs etc. other users. If set to false, the global swap readahead algorithm will be used for all swappable pages. - -What: /sys/kernel/mm/swap/vma_ra_max_order -Date: August 2017 -Contact: Linux memory management mailing list <linux-mm@kvack.org> -Description: The max readahead size in order for VMA based swap readahead - - VMA based swap readahead algorithm will readahead at - most 1 << max_order pages for each readahead. The - real readahead size for each readahead will be scaled - according to the estimation algorithm. diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 713cab1..a1d1612 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -127,7 +127,7 @@ Description: What; /sys/power/pm_trace_dev_match Date: October 2010 -Contact: James Hogan <james@albanarts.com> +Contact: James Hogan <jhogan@kernel.org> Description: The /sys/power/pm_trace_dev_match file contains the name of the device associated with the last PM event point saved in the RTC diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst index 8282099..5da1018 100644 --- a/Documentation/core-api/kernel-api.rst +++ b/Documentation/core-api/kernel-api.rst @@ -352,44 +352,30 @@ Read-Copy Update (RCU) ---------------------- .. kernel-doc:: include/linux/rcupdate.h - :external: .. kernel-doc:: include/linux/rcupdate_wait.h - :external: .. kernel-doc:: include/linux/rcutree.h - :external: .. kernel-doc:: kernel/rcu/tree.c - :external: .. kernel-doc:: kernel/rcu/tree_plugin.h - :external: .. kernel-doc:: kernel/rcu/tree_exp.h - :external: .. kernel-doc:: kernel/rcu/update.c - :external: .. kernel-doc:: include/linux/srcu.h - :external: .. kernel-doc:: kernel/rcu/srcutree.c - :external: .. kernel-doc:: include/linux/rculist_bl.h - :external: .. kernel-doc:: include/linux/rculist.h - :external: .. kernel-doc:: include/linux/rculist_nulls.h - :external: .. kernel-doc:: include/linux/rcu_sync.h - :external: .. kernel-doc:: kernel/rcu/sync.c - :external: diff --git a/Documentation/core-api/workqueue.rst b/Documentation/core-api/workqueue.rst index 3943b5b..00a5ba5 100644 --- a/Documentation/core-api/workqueue.rst +++ b/Documentation/core-api/workqueue.rst @@ -39,8 +39,8 @@ up. Although MT wq wasted a lot of resource, the level of concurrency provided was unsatisfactory. The limitation was common to both ST and MT wq albeit less severe on MT. Each wq maintained its own separate -worker pool. A MT wq could provide only one execution context per CPU -while a ST wq one for the whole system. Work items had to compete for +worker pool. An MT wq could provide only one execution context per CPU +while an ST wq one for the whole system. Work items had to compete for those very limited execution contexts leading to various problems including proneness to deadlocks around the single execution context. @@ -151,7 +151,7 @@ Application Programming Interface (API) ``alloc_workqueue()`` allocates a wq. The original ``create_*workqueue()`` functions are deprecated and scheduled for -removal. ``alloc_workqueue()`` takes three arguments - @``name``, +removal. ``alloc_workqueue()`` takes three arguments - ``@name``, ``@flags`` and ``@max_active``. ``@name`` is the name of the wq and also used as the name of the rescuer thread if there is one. @@ -197,7 +197,7 @@ resources, scheduled and executed. served by worker threads with elevated nice level. Note that normal and highpri worker-pools don't interact with - each other. Each maintain its separate pool of workers and + each other. Each maintains its separate pool of workers and implements concurrency management among its workers. ``WQ_CPU_INTENSIVE`` @@ -249,8 +249,8 @@ unbound worker-pools and only one work item could be active at any given time thus achieving the same ordering property as ST wq. In the current implementation the above configuration only guarantees -ST behavior within a given NUMA node. Instead alloc_ordered_queue should -be used to achieve system wide ST behavior. +ST behavior within a given NUMA node. Instead ``alloc_ordered_queue()`` should +be used to achieve system-wide ST behavior. Example Execution Scenarios diff --git a/Documentation/cpu-freq/index.txt b/Documentation/cpu-freq/index.txt index 03a7cee..c15e753 100644 --- a/Documentation/cpu-freq/index.txt +++ b/Documentation/cpu-freq/index.txt @@ -32,8 +32,6 @@ cpufreq-stats.txt - General description of sysfs cpufreq stats. index.txt - File index, Mailing list and Links (this document) -intel-pstate.txt - Intel pstate cpufreq driver specific file. - pcc-cpufreq.txt - PCC cpufreq driver specific file. diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 4a0a746..32df07e 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -344,3 +344,4 @@ Version History (wrong raid10_copies/raid10_format sequence) 1.11.1 Add raid4/5/6 journal write-back support via journal_mode option 1.12.1 fix for MD deadlock between mddev_suspend() and md_write_start() available +1.13.0 Fix dev_health status at end of "recover" (was 'a', now 'A') diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt index a135504..cac24ee 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt @@ -32,7 +32,7 @@ Example: compatible = "st,stm32h743-rcc", "st,stm32-rcc"; reg = <0x58024400 0x400>; #reset-cells = <1>; - #clock-cells = <2>; + #clock-cells = <1>; clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>; st,syscfg = <&pwrcfg>; diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt index 38d7431..b6c1afa 100644 --- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -16,6 +16,10 @@ Optional properties: - ams,tuning-capacitor-pf: Calibration tuning capacitor stepping value 0 - 120pF. This will require using the calibration data from the manufacturer. + - ams,nflwdth: Set the noise and watchdog threshold register on + startup. This will need to set according to the noise from the + MCU board, and possibly the local environment. Refer to the + datasheet for the threshold settings. Example: @@ -27,4 +31,5 @@ as3935@0 { interrupt-parent = <&gpio1>; interrupts = <16 1>; ams,tuning-capacitor-pf = <80>; + ams,nflwdth = <0x44>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index 4c29cda..5eb108e 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -99,7 +99,7 @@ Examples: compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x200000>; + reg = <0x0 0x2c200000 0 0x20000>; }; }; @@ -124,14 +124,14 @@ Examples: compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x200000>; + reg = <0x0 0x2c200000 0 0x20000>; }; gic-its@2c400000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x0 0x2c400000 0 0x200000>; + reg = <0x0 0x2c400000 0 0x20000>; }; ppi-partitions { diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt index 12c5ef2..fdc40e3 100644 --- a/Documentation/devicetree/bindings/leds/ams,as3645a.txt +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt @@ -15,11 +15,14 @@ Required properties compatible : Must be "ams,as3645a". reg : The I2C address of the device. Typically 0x30. +#address-cells : 1 +#size-cells : 0 -Required properties of the "flash" child node -============================================= +Required properties of the flash child node (0) +=============================================== +reg: 0 flash-timeout-us: Flash timeout in microseconds. The value must be in the range [100000, 850000] and divisible by 50000. flash-max-microamp: Maximum flash current in microamperes. Has to be @@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The and divisible by 50000. -Optional properties of the "flash" child node -============================================= +Optional properties of the flash child node +=========================================== label : The label of the flash LED. -Required properties of the "indicator" child node -================================================= +Required properties of the indicator child node (1) +=================================================== +reg: 1 led-max-microamp: Maximum indicator current. The allowed values are 2500, 5000, 7500 and 10000. -Optional properties of the "indicator" child node -================================================= +Optional properties of the indicator child node +=============================================== label : The label of the indicator LED. @@ -55,16 +59,20 @@ Example ======= as3645a@30 { + #address-cells: 1 + #size-cells: 0 reg = <0x30>; compatible = "ams,as3645a"; - flash { + flash@0 { + reg = <0x0>; flash-timeout-us = <150000>; flash-max-microamp = <320000>; led-max-microamp = <60000>; ams,input-max-microamp = <1750000>; label = "as3645a:flash"; }; - indicator { + indicator@1 { + reg = <0x1>; led-max-microamp = <10000>; label = "as3645a:indicator"; }; diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index b37bdde..bdd0176 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -65,45 +65,6 @@ Optional properties: a value that is out of range for a 16 bit register then the chip default will be used. If present exactly five values must be specified. - - wlf,inmode : A list of INn_MODE register values, where n is the number - of input signals. Valid values are 0 (Differential), 1 (Single-ended) and - 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. - If present, values must be specified less than or equal to the number of - input signals. If values less than the number of input signals, elements - that have not been specified are set to 0 by default. Entries are: - <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) - <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) - - wlf,out-mono : A list of boolean values indicating whether each output is - mono or stereo. Position within the list indicates the output affected - (eg. First entry in the list corresponds to output 1). A non-zero value - indicates a mono output. If present, the number of values should be less - than or equal to the number of outputs, if less values are supplied the - additional outputs will be treated as stereo. - - - wlf,dmic-ref : DMIC reference voltage source for each input, can be - selected from either MICVDD or one of the MICBIAS's, defines - (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If - present, the number of values should be less than or equal to the - number of inputs, unspecified inputs will use the chip default. - - - wlf,max-channels-clocked : The maximum number of channels to be clocked on - each AIF, useful for I2S systems with multiple data lines being mastered. - Specify one cell for each AIF to be configured, specify zero for AIFs that - should be handled normally. - If present, number of cells must be less than or equal to the number of - AIFs. If less than the number of AIFs, for cells that have not been - specified the corresponding AIFs will be treated as default setting. - - - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt @@ -112,6 +73,7 @@ Optional properties: Also see child specific device properties: Regulator - ../regulator/arizona-regulator.txt Extcon - ../extcon/extcon-arizona.txt + Sound - ../sound/arizona.txt Example: diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt index b878a1e..ed1456f 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt @@ -16,11 +16,13 @@ Required Properties: - clocks: Array of clocks required for SDHC. - Require at least input clock for Xenon IP core. + Require at least input clock for Xenon IP core. For Armada AP806 and + CP110, the AXI clock is also mandatory. - clock-names: Array of names corresponding to clocks property. The input clock for Xenon IP core should be named as "core". + The input clock for the AXI bus must be named as "axi". - reg: * For "marvell,armada-3700-sdhci", two register areas. @@ -106,8 +108,8 @@ Example: compatible = "marvell,armada-ap806-sdhci"; reg = <0xaa0000 0x1000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH> - clocks = <&emmc_clk>; - clock-names = "core"; + clocks = <&emmc_clk>,<&axi_clk>; + clock-names = "core", "axi"; bus-width = <4>; marvell,xenon-phy-slow-mode; marvell,xenon-tun-count = <11>; @@ -126,8 +128,8 @@ Example: interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH> vqmmc-supply = <&sd_vqmmc_regulator>; vmmc-supply = <&sd_vmmc_regulator>; - clocks = <&sdclk>; - clock-names = "core"; + clocks = <&sdclk>, <&axi_clk>; + clock-names = "core", "axi"; bus-width = <4>; marvell,xenon-tun-count = <9>; }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 7e2dad0..1814fa1 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -21,8 +21,9 @@ Required properties: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) - GOP clock (for both armada-375-pp2 and armada-7k-pp2) - MG clock (only for armada-7k-pp2) -- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and - "mg_clk" (the latter only for armada-7k-pp2). + - AXI clock (only for armada-7k-pp2) +- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk" + and "axi_clk" (the 2 latter only for armada-7k-pp2). The ethernet ports are represented by subnodes. At least one port is required. @@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2: cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; - clock-names = "pp_clk", "gop_clk", "gp_clk"; + clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, + <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>; + clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk"; eth0: eth0 { interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 6af8eed..9c16ee2 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -4,6 +4,7 @@ The device node has following properties. Required properties: - compatible: should be "rockchip,<name>-gamc" + "rockchip,rk3128-gmac": found on RK312x SoCs "rockchip,rk3228-gmac": found on RK322x SoCs "rockchip,rk3288-gmac": found on RK3288 SoCs "rockchip,rk3328-gmac": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt new file mode 100644 index 0000000..830069b --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt @@ -0,0 +1,28 @@ +Binding for the Synopsys HSDK reset controller + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,hsdk-reset". +- reg: should always contain 2 pairs address - length: first for reset + configuration register and second for corresponding SW reset and status bits + register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset@880 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8A0 0x4>, <0xFF0 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset HSDK_V1_ETH_RESET>; + .... + }; + +The index could be found in <dt-bindings/reset/snps,hsdk-reset.h> diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt index 3eca6de..a65d7b7 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt @@ -8,6 +8,12 @@ Required properties: the firmware event log - linux,sml-size : size of the memory allocated for the firmware event log +Optional properties: + +- powered-while-suspended: present when the TPM is left powered on between + suspend and resume (makes the suspend/resume + callbacks do nothing). + Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C) ---------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 4fc9694..cf504d0 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -41,6 +41,8 @@ Required properties: - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. + - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. + - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 6e6720a..d04ea3b 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -17,6 +17,7 @@ Below are same as Simple-Card. - bitclock-master - bitclock-inversion - frame-inversion +- mclk-fs - dai-tdm-slot-num - dai-tdm-slot-width - clocks / system-clock-frequency diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt index 8b8afe9..441dd6f 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -43,7 +43,7 @@ Example 1. Sampling Rate Conversion label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port>; @@ -79,7 +79,8 @@ Example 2. 2 CPU 1 Codec (Mixing) label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "codec Playback", "DAI1 Playback", + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port0 diff --git a/Documentation/devicetree/bindings/sound/cs42l56.txt b/Documentation/devicetree/bindings/sound/cs42l56.txt index 4feb0eb..4ba520a 100644 --- a/Documentation/devicetree/bindings/sound/cs42l56.txt +++ b/Documentation/devicetree/bindings/sound/cs42l56.txt @@ -55,7 +55,7 @@ Example: codec: codec@4b { compatible = "cirrus,cs42l56"; reg = <0x4b>; - gpio-reset = <&gpio 10 0>; + cirrus,gpio-nreset = <&gpio 10 0>; cirrus,chgfreq-divisor = <0x05>; cirrus.ain1_ref_cfg; cirrus,micbias-lvl = <5>; diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt index 929ca67..4f33b0d 100644 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ b/Documentation/devicetree/bindings/sound/rt5514.txt @@ -1,22 +1,27 @@ RT5514 audio CODEC -This device supports I2C only. +This device supports both I2C and SPI. Required properties: - compatible : "realtek,rt5514". -- reg : The I2C address of the device. +- reg : the I2C address of the device for I2C, the chip select + number for SPI. Optional properties: - clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk" +- interrupt-parent: The phandle for the interrupt controller. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - realtek,dmic-init-delay-ms - Set the DMIC initial delay (ms) to wait it ready. + Set the DMIC initial delay (ms) to wait it ready for I2C. -Pins on the device (for linking into audio routes) for RT5514: +Pins on the device (for linking into audio routes) for I2C: * DMIC1L * DMIC1R diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt new file mode 100644 index 0000000..e172c62 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.txt @@ -0,0 +1,53 @@ +Cirrus Logic Arizona class audio SoCs + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +This document lists sound specific bindings, see the primary binding +document: + ../mfd/arizona.txt + +Optional properties: + + - wlf,inmode : A list of INn_MODE register values, where n is the number + of input signals. Valid values are 0 (Differential), 1 (Single-ended) and + 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. + If present, values must be specified less than or equal to the number of + input signals. If values less than the number of input signals, elements + that have not been specified are set to 0 by default. Entries are: + <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) + <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) + - wlf,out-mono : A list of boolean values indicating whether each output is + mono or stereo. Position within the list indicates the output affected + (eg. First entry in the list corresponds to output 1). A non-zero value + indicates a mono output. If present, the number of values should be less + than or equal to the number of outputs, if less values are supplied the + additional outputs will be treated as stereo. + + - wlf,dmic-ref : DMIC reference voltage source for each input, can be + selected from either MICVDD or one of the MICBIAS's, defines + (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If + present, the number of values should be less than or equal to the + number of inputs, unspecified inputs will use the chip default. + + - wlf,max-channels-clocked : The maximum number of channels to be clocked on + each AIF, useful for I2S systems with multiple data lines being mastered. + Specify one cell for each AIF to be configured, specify zero for AIFs that + should be handled normally. + If present, number of cells must be less than or equal to the number of + AIFs. If less than the number of AIFs, for cells that have not been + specified the corresponding AIFs will be treated as default setting. + + - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,out-volume-limit : The volume limit value that should be applied to each + output channel. See the datasheet for exact values. Channels are specified + in the order OUT1L, OUT1R, OUT2L, OUT2R, etc. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 1ea1fd4..1afd298 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -3,8 +3,8 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order. This isn't an exhaustive list, but you should add new prefixes to it before using them to avoid name-space collisions. -abcn Abracon Corporation abilis Abilis Systems +abracon Abracon Corporation actions Actions Semiconductor Co., Ltd. active-semi Active-Semi International Inc ad Avionic Design GmbH diff --git a/Documentation/driver-api/pm/devices.rst b/Documentation/driver-api/pm/devices.rst index bedd323..a0dc287 100644 --- a/Documentation/driver-api/pm/devices.rst +++ b/Documentation/driver-api/pm/devices.rst @@ -675,7 +675,7 @@ sub-domain of the parent domain. Support for power domains is provided through the :c:member:`pm_domain` field of |struct device|. This field is a pointer to an object of type -|struct dev_pm_domain|, defined in :file:`include/linux/pm.h``, providing a set +|struct dev_pm_domain|, defined in :file:`include/linux/pm.h`, providing a set of power management callbacks analogous to the subsystem-level and device driver callbacks that are executed for the given device during all power transitions, instead of the respective subsystem-level callbacks. Specifically, if a diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt index 4421135..d661e6f 100644 --- a/Documentation/driver-model/driver.txt +++ b/Documentation/driver-model/driver.txt @@ -196,12 +196,13 @@ struct driver_attribute { }; Device drivers can export attributes via their sysfs directories. -Drivers can declare attributes using a DRIVER_ATTR macro that works -identically to the DEVICE_ATTR macro. +Drivers can declare attributes using a DRIVER_ATTR_RW and DRIVER_ATTR_RO +macro that works identically to the DEVICE_ATTR_RW and DEVICE_ATTR_RO +macros. Example: -DRIVER_ATTR(debug,0644,show_debug,store_debug); +DRIVER_ATTR_RW(debug); This is equivalent to declaring: diff --git a/Documentation/filesystems/cifs/AUTHORS b/Documentation/filesystems/cifs/AUTHORS index c98800d..9f4f87e 100644 --- a/Documentation/filesystems/cifs/AUTHORS +++ b/Documentation/filesystems/cifs/AUTHORS @@ -41,6 +41,11 @@ Igor Mammedov (DFS support) Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code) Scott Lovenberg Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features) +Aurelien Aptel (for DFS SMB3 work and some key bug fixes) +Ronnie Sahlberg (for SMB3 xattr work and bug fixes) +Shirish Pargaonkar (for many ACL patches over the years) +Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security) + Test case and Bug Report contributors ------------------------------------- diff --git a/Documentation/filesystems/cifs/README b/Documentation/filesystems/cifs/README index a5478840..a9da515 100644 --- a/Documentation/filesystems/cifs/README +++ b/Documentation/filesystems/cifs/README @@ -1,10 +1,14 @@ -The CIFS VFS support for Linux supports many advanced network filesystem -features such as hierarchical dfs like namespace, hardlinks, locking and more. +This module supports the SMB3 family of advanced network protocols (as well +as older dialects, originally called "CIFS" or SMB1). + +The CIFS VFS module for Linux supports many advanced network filesystem +features such as hierarchical DFS like namespace, hardlinks, locking and more. It was designed to comply with the SNIA CIFS Technical Reference (which supersedes the 1992 X/Open SMB Standard) as well as to perform best practice practical interoperability with Windows 2000, Windows XP, Samba and equivalent servers. This code was developed in participation with the Protocol Freedom -Information Foundation. +Information Foundation. CIFS and now SMB3 has now become a defacto +standard for interoperating between Macs and Windows and major NAS appliances. Please see http://protocolfreedom.org/ and @@ -15,30 +19,11 @@ for more details. For questions or bug reports please contact: sfrench@samba.org (sfrench@us.ibm.com) +See the project page at: https://wiki.samba.org/index.php/LinuxCIFS_utils + Build instructions: ================== -For Linux 2.4: -1) Get the kernel source (e.g.from http://www.kernel.org) -and download the cifs vfs source (see the project page -at http://us1.samba.org/samba/Linux_CIFS_client.html) -and change directory into the top of the kernel directory -then patch the kernel (e.g. "patch -p1 < cifs_24.patch") -to add the cifs vfs to your kernel configure options if -it has not already been added (e.g. current SuSE and UL -users do not need to apply the cifs_24.patch since the cifs vfs is -already in the kernel configure menu) and then -mkdir linux/fs/cifs and then copy the current cifs vfs files from -the cifs download to your kernel build directory e.g. - - cp <cifs_download_dir>/fs/cifs/* to <kernel_download_dir>/fs/cifs - -2) make menuconfig (or make xconfig) -3) select cifs from within the network filesystem choices -4) save and exit -5) make dep -6) make modules (or "make" if CIFS VFS not to be built as a module) - -For Linux 2.6: +For Linux: 1) Download the kernel (e.g. from http://www.kernel.org) and change directory into the top of the kernel directory tree (e.g. /usr/src/linux-2.5.73) @@ -61,16 +46,13 @@ would simply type "make install"). If you do not have the utility mount.cifs (in the Samba 3.0 source tree and on the CIFS VFS web site) copy it to the same directory in which mount.smbfs and similar files reside (usually /sbin). Although the helper software is not -required, mount.cifs is recommended. Eventually the Samba 3.0 utility program -"net" may also be helpful since it may someday provide easier mount syntax for -users who are used to Windows e.g. - net use <mount point> <UNC name or cifs URL> +required, mount.cifs is recommended. Most distros include a "cifs-utils" +package that includes this utility so it is recommended to install this. + Note that running the Winbind pam/nss module (logon service) on all of your Linux clients is useful in mapping Uids and Gids consistently across the domain to the proper network user. The mount.cifs mount helper can be -trivially built from Samba 3.0 or later source e.g. by executing: - - gcc samba/source/client/mount.cifs.c -o mount.cifs +found at cifs-utils.git on git.samba.org If cifs is built as a module, then the size and number of network buffers and maximum number of simultaneous requests to one server can be configured. @@ -79,6 +61,18 @@ Changing these from their defaults is not recommended. By executing modinfo on kernel/fs/cifs/cifs.ko the list of configuration changes that can be made at module initialization time (by running insmod cifs.ko) can be seen. +Recommendations +=============== +To improve security the SMB2.1 dialect or later (usually will get SMB3) is now +the new default. To use old dialects (e.g. to mount Windows XP) use "vers=1.0" +on mount (or vers=2.0 for Windows Vista). Note that the CIFS (vers=1.0) is +much older and less secure than the default dialect SMB3 which includes +many advanced security features such as downgrade attack detection +and encrypted shares and stronger signing and authentication algorithms. +There are additional mount options that may be helpful for SMB3 to get +improved POSIX behavior (NB: can use vers=3.0 to force only SMB3, never 2.1): + "mfsymlinks" and "cifsacl" and "idsfromsid" + Allowing User Mounts ==================== To permit users to mount and unmount over directories they own is possible @@ -98,9 +92,7 @@ and execution of suid programs on the remote target would be enabled by default. This can be changed, as with nfs and other filesystems, by simply specifying "nosuid" among the mount options. For user mounts though to be able to pass the suid flag to mount requires rebuilding -mount.cifs with the following flag: - - gcc samba/source/client/mount.cifs.c -DCIFS_ALLOW_USR_SUID -o mount.cifs +mount.cifs with the following flag: CIFS_ALLOW_USR_SUID There is a corresponding manual page for cifs mounting in the Samba 3.0 and later source tree in docs/manpages/mount.cifs.8 @@ -189,18 +181,18 @@ applications running on the same server as Samba. Use instructions: ================ Once the CIFS VFS support is built into the kernel or installed as a module -(cifs.o), you can use mount syntax like the following to access Samba or Windows -servers: +(cifs.ko), you can use mount syntax like the following to access Samba or +Mac or Windows servers: - mount -t cifs //9.53.216.11/e$ /mnt -o user=myname,pass=mypassword + mount -t cifs //9.53.216.11/e$ /mnt -o username=myname,password=mypassword Before -o the option -v may be specified to make the mount.cifs mount helper display the mount steps more verbosely. After -o the following commonly used cifs vfs specific options are supported: - user=<username> - pass=<password> + username=<username> + password=<password> domain=<domain name> Other cifs mount options are described below. Use of TCP names (in addition to @@ -246,13 +238,16 @@ the Server's registry. Samba starting with version 3.10 will allow such filenames (ie those which contain valid Linux characters, which normally would be forbidden for Windows/CIFS semantics) as long as the server is configured for Unix Extensions (and the client has not disabled -/proc/fs/cifs/LinuxExtensionsEnabled). - +/proc/fs/cifs/LinuxExtensionsEnabled). In addition the mount option +"mapposix" can be used on CIFS (vers=1.0) to force the mapping of +illegal Windows/NTFS/SMB characters to a remap range (this mount parm +is the default for SMB3). This remap ("mapposix") range is also +compatible with Mac (and "Services for Mac" on some older Windows). CIFS VFS Mount Options ====================== A partial list of the supported mount options follows: - user The user name to use when trying to establish + username The user name to use when trying to establish the CIFS session. password The user password. If the mount helper is installed, the user will be prompted for password diff --git a/Documentation/filesystems/cifs/TODO b/Documentation/filesystems/cifs/TODO index 066ffdd..396ecfd 100644 --- a/Documentation/filesystems/cifs/TODO +++ b/Documentation/filesystems/cifs/TODO @@ -1,4 +1,4 @@ -Version 2.03 August 1, 2014 +Version 2.04 September 13, 2017 A Partial List of Missing Features ================================== @@ -8,73 +8,69 @@ for visible, important contributions to this module. Here is a partial list of the known problems and missing features: a) SMB3 (and SMB3.02) missing optional features: - - RDMA + - RDMA (started) - multichannel (started) - directory leases (improved metadata caching) - T10 copy offload (copy chunk is only mechanism supported) - - encrypted shares b) improved sparse file support c) Directory entry caching relies on a 1 second timer, rather than -using FindNotify or equivalent. - (started) +using Directory Leases d) quota support (needs minor kernel change since quota calls to make it to network filesystems or deviceless filesystems) -e) improve support for very old servers (OS/2 and Win9x for example) -Including support for changing the time remotely (utimes command). +e) Better optimize open to reduce redundant opens (using reference +counts more) and to improve use of compounding in SMB3 to reduce +number of roundtrips. -f) hook lower into the sockets api (as NFS/SunRPC does) to avoid the -extra copy in/out of the socket buffers in some cases. - -g) Better optimize open (and pathbased setfilesize) to reduce the -oplock breaks coming from windows srv. Piggyback identical file -opens on top of each other by incrementing reference count rather -than resending (helps reduce server resource utilization and avoid -spurious oplock breaks). - -h) Add support for storing symlink info to Windows servers -in the Extended Attribute format their SFU clients would recognize. - -i) Finish inotify support so kde and gnome file list windows +f) Finish inotify support so kde and gnome file list windows will autorefresh (partially complete by Asser). Needs minor kernel vfs change to support removing D_NOTIFY on a file. -j) Add GUI tool to configure /proc/fs/cifs settings and for display of +g) Add GUI tool to configure /proc/fs/cifs settings and for display of the CIFS statistics (started) -k) implement support for security and trusted categories of xattrs +h) implement support for security and trusted categories of xattrs (requires minor protocol extension) to enable better support for SELINUX -l) Implement O_DIRECT flag on open (already supported on mount) +i) Implement O_DIRECT flag on open (already supported on mount) -m) Create UID mapping facility so server UIDs can be mapped on a per +j) Create UID mapping facility so server UIDs can be mapped on a per mount or a per server basis to client UIDs or nobody if no mapping -exists. This is helpful when Unix extensions are negotiated to -allow better permission checking when UIDs differ on the server -and client. Add new protocol request to the CIFS protocol -standard for asking the server for the corresponding name of a -particular uid. +exists. Also better integration with winbind for resolving SID owners + +k) Add tools to take advantage of more smb3 specific ioctls and features + +l) encrypted file support + +m) improved stats gathering, tools (perhaps integration with nfsometer?) -n) DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for this too) +n) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed +file attribute via chflags) and improve user space tools for managing and +viewing them. -o) mount check for unmatched uids +o) mount helper GUI (to simplify the various configuration options on mount) -p) Add support for new vfs entry point for fallocate +p) autonegotiation of dialects (offering more than one dialect ie SMB3.02, +SMB3, SMB2.1 not just SMB3). -q) Add tools to take advantage of cifs/smb3 specific ioctls and features -such as "CopyChunk" (fast server side file copy) +q) Allow mount.cifs to be more verbose in reporting errors with dialect +or unsupported feature errors. -r) encrypted file support +r) updating cifs documentation, and user guid. -s) improved stats gathering, tools (perhaps integration with nfsometer?) +s) Addressing bugs found by running a broader set of xfstests in standard +file system xfstest suite. -t) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed -file attribute via chflags) +t) split cifs and smb3 support into separate modules so legacy (and less +secure) CIFS dialect can be disabled in environments that don't need it +and simplify the code. -u) mount helper GUI (to simplify the various configuration options on mount) +u) Finish up SMB3.1.1 dialect support +v) POSIX Extensions for SMB3.1.1 KNOWN BUGS ==================================== diff --git a/Documentation/filesystems/cifs/cifs.txt b/Documentation/filesystems/cifs/cifs.txt index 2fac91a..6775660 100644 --- a/Documentation/filesystems/cifs/cifs.txt +++ b/Documentation/filesystems/cifs/cifs.txt @@ -1,24 +1,28 @@ - This is the client VFS module for the Common Internet File System - (CIFS) protocol which is the successor to the Server Message Block + This is the client VFS module for the SMB3 NAS protocol as well + older dialects such as the Common Internet File System (CIFS) + protocol which was the successor to the Server Message Block (SMB) protocol, the native file sharing mechanism for most early PC operating systems. New and improved versions of CIFS are now called SMB2 and SMB3. These dialects are also supported by the CIFS VFS module. CIFS is fully supported by network - file servers such as Windows 2000, 2003, 2008 and 2012 + file servers such as Windows 2000, 2003, 2008, 2012 and 2016 as well by Samba (which provides excellent CIFS - server support for Linux and many other operating systems), so + server support for Linux and many other operating systems), Apple + systems, as well as most Network Attached Storage vendors, so this network filesystem client can mount to a wide variety of servers. The intent of this module is to provide the most advanced network - file system function for CIFS compliant servers, including better - POSIX compliance, secure per-user session establishment, high - performance safe distributed caching (oplock), optional packet + file system function for SMB3 compliant servers, including advanced + security features, excellent parallelized high performance i/o, better + POSIX compliance, secure per-user session establishment, encryption, + high performance safe distributed caching (leases/oplocks), optional packet signing, large files, Unicode support and other internationalization improvements. Since both Samba server and this filesystem client support - the CIFS Unix extensions, the combination can provide a reasonable - alternative to NFSv4 for fileserving in some Linux to Linux environments, - not just in Linux to Windows environments. + the CIFS Unix extensions (and in the future SMB3 POSIX extensions), + the combination can provide a reasonable alternative to other network and + cluster file systems for fileserving in some Linux to Linux environments, + not just in Linux to Windows (or Linux to Mac) environments. This filesystem has an mount utility (mount.cifs) that can be obtained from diff --git a/Documentation/filesystems/overlayfs.txt b/Documentation/filesystems/overlayfs.txt index 36f528a..8caa607 100644 --- a/Documentation/filesystems/overlayfs.txt +++ b/Documentation/filesystems/overlayfs.txt @@ -210,8 +210,11 @@ path as another overlay mount and it may use a lower layer path that is beneath or above the path of another overlay lower layer path. Using an upper layer path and/or a workdir path that are already used by -another overlay mount is not allowed and will fail with EBUSY. Using +another overlay mount is not allowed and may fail with EBUSY. Using partially overlapping paths is not allowed but will not fail with EBUSY. +If files are accessed from two overlayfs mounts which share or overlap the +upper layer and/or workdir path the behavior of the overlay is undefined, +though it will not result in a crash or deadlock. Mounting an overlay using an upper layer path, where the upper layer path was previously used by another mounted overlay in combination with a diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt index 24da7b3..9a3658c 100644 --- a/Documentation/filesystems/sysfs.txt +++ b/Documentation/filesystems/sysfs.txt @@ -366,7 +366,8 @@ struct driver_attribute { Declaring: -DRIVER_ATTR(_name, _mode, _show, _store) +DRIVER_ATTR_RO(_name) +DRIVER_ATTR_RW(_name) Creation/Removal: diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 0500193..d477024 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -36,6 +36,7 @@ Supported adapters: * Intel Gemini Lake (SOC) * Intel Cannon Lake-H (PCH) * Intel Cannon Lake-LP (PCH) + * Intel Cedar Fork (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index 329e740..f6f8038 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -1108,14 +1108,6 @@ When kbuild executes, the following steps are followed (roughly): ld Link target. Often, LDFLAGS_$@ is used to set specific options to ld. - objcopy - Copy binary. Uses OBJCOPYFLAGS usually specified in - arch/$(ARCH)/Makefile. - OBJCOPYFLAGS_$@ may be used to set additional options. - - gzip - Compress target. Use maximum compression to compress target. - Example: #arch/x86/boot/Makefile LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary @@ -1139,6 +1131,19 @@ When kbuild executes, the following steps are followed (roughly): resulting in the target file being recompiled for no obvious reason. + objcopy + Copy binary. Uses OBJCOPYFLAGS usually specified in + arch/$(ARCH)/Makefile. + OBJCOPYFLAGS_$@ may be used to set additional options. + + gzip + Compress target. Use maximum compression to compress target. + + Example: + #arch/x86/boot/compressed/Makefile + $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE + $(call if_changed,gzip) + dtc Create flattened device tree blob object suitable for linking into vmlinux. Device tree blobs linked into vmlinux are placed @@ -1219,7 +1224,7 @@ When kbuild executes, the following steps are followed (roughly): that may be shared between individual architectures. The recommended approach how to use a generic header file is to list the file in the Kbuild file. - See "7.3 generic-y" for further info on syntax etc. + See "7.2 generic-y" for further info on syntax etc. --- 6.11 Post-link pass @@ -1254,13 +1259,13 @@ A Kbuild file may be defined under arch/<arch>/include/uapi/asm/ and arch/<arch>/include/asm/ to list asm files coming from asm-generic. See subsequent chapter for the syntax of the Kbuild file. - --- 7.1 no-export-headers +--- 7.1 no-export-headers no-export-headers is essentially used by include/uapi/linux/Kbuild to avoid exporting specific headers (e.g. kvm.h) on architectures that do not support it. It should be avoided as much as possible. - --- 7.2 generic-y +--- 7.2 generic-y If an architecture uses a verbatim copy of a header from include/asm-generic then this is listed in the file @@ -1287,7 +1292,7 @@ See subsequent chapter for the syntax of the Kbuild file. Example: termios.h #include <asm-generic/termios.h> - --- 7.3 generated-y +--- 7.3 generated-y If an architecture generates other header files alongside generic-y wrappers, generated-y specifies them. @@ -1299,7 +1304,7 @@ See subsequent chapter for the syntax of the Kbuild file. #arch/x86/include/asm/Kbuild generated-y += syscalls_32.h - --- 7.5 mandatory-y +--- 7.4 mandatory-y mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm to define the minimum set of headers that must be exported in diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 57f52cd..9ba04c0 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -2387,7 +2387,7 @@ broadcast: Like active-backup, there is not much advantage to this and packet type ID), so in a "gatewayed" configuration, all outgoing traffic will generally use the same device. Incoming traffic may also end up on a single device, but that is - dependent upon the balancing policy of the peer's 8023.ad + dependent upon the balancing policy of the peer's 802.3ad implementation. In a "local" configuration, traffic will be distributed across the devices in the bond. diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index 789b74d..8781485 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -337,7 +337,7 @@ Examples for low-level BPF: jeq #14, good /* __NR_rt_sigprocmask */ jeq #13, good /* __NR_rt_sigaction */ jeq #35, good /* __NR_nanosleep */ - bad: ret #0 /* SECCOMP_RET_KILL */ + bad: ret #0 /* SECCOMP_RET_KILL_THREAD */ good: ret #0x7fff0000 /* SECCOMP_RET_ALLOW */ The above example code can be placed into a file (here called "foo"), and diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index b3345d0..77f4de5 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1680,6 +1680,9 @@ accept_dad - INTEGER 2: Enable DAD, and disable IPv6 operation if MAC-based duplicate link-local address has been found. + DAD operation and mode on a given interface will be selected according + to the maximum value of conf/{all,interface}/accept_dad. + force_tllao - BOOLEAN Enable sending the target link-layer address option even when responding to a unicast neighbor solicitation. @@ -1727,16 +1730,23 @@ suppress_frag_ndisc - INTEGER optimistic_dad - BOOLEAN Whether to perform Optimistic Duplicate Address Detection (RFC 4429). - 0: disabled (default) - 1: enabled + 0: disabled (default) + 1: enabled + + Optimistic Duplicate Address Detection for the interface will be enabled + if at least one of conf/{all,interface}/optimistic_dad is set to 1, + it will be disabled otherwise. use_optimistic - BOOLEAN If enabled, do not classify optimistic addresses as deprecated during source address selection. Preferred addresses will still be chosen before optimistic addresses, subject to other ranking in the source address selection algorithm. - 0: disabled (default) - 1: enabled + 0: disabled (default) + 1: enabled + + This will be enabled if at least one of + conf/{all,interface}/use_optimistic is set to 1, disabled otherwise. stable_secret - IPv6 address This IPv6 address will be used as a secret to generate IPv6 diff --git a/Documentation/networking/switchdev.txt b/Documentation/networking/switchdev.txt index 5e40e1f..82236a1 100644 --- a/Documentation/networking/switchdev.txt +++ b/Documentation/networking/switchdev.txt @@ -13,42 +13,42 @@ an example setup using a data-center-class switch ASIC chip. Other setups with SR-IOV or soft switches, such as OVS, are possible. - User-space tools - - user space | - +-------------------------------------------------------------------+ - kernel | Netlink - | - +--------------+-------------------------------+ - | Network stack | - | (Linux) | - | | - +----------------------------------------------+ + User-space tools + + user space | + +-------------------------------------------------------------------+ + kernel | Netlink + | + +--------------+-------------------------------+ + | Network stack | + | (Linux) | + | | + +----------------------------------------------+ sw1p2 sw1p4 sw1p6 - sw1p1 + sw1p3 + sw1p5 + eth1 - + | + | + | + - | | | | | | | - +--+----+----+----+-+--+----+---+ +-----+-----+ - | Switch driver | | mgmt | - | (this document) | | driver | - | | | | - +--------------+----------------+ +-----------+ - | - kernel | HW bus (eg PCI) - +-------------------------------------------------------------------+ - hardware | - +--------------+---+------------+ - | Switch device (sw1) | - | +----+ +--------+ - | | v offloaded data path | mgmt port - | | | | - +--|----|----+----+----+----+---+ - | | | | | | - + + + + + + - p1 p2 p3 p4 p5 p6 - - front-panel ports + sw1p1 + sw1p3 + sw1p5 + eth1 + + | + | + | + + | | | | | | | + +--+----+----+----+----+----+---+ +-----+-----+ + | Switch driver | | mgmt | + | (this document) | | driver | + | | | | + +--------------+----------------+ +-----------+ + | + kernel | HW bus (eg PCI) + +-------------------------------------------------------------------+ + hardware | + +--------------+----------------+ + | Switch device (sw1) | + | +----+ +--------+ + | | v offloaded data path | mgmt port + | | | | + +--|----|----+----+----+----+---+ + | | | | | | + + + + + + + + p1 p2 p3 p4 p5 p6 + + front-panel ports Fig 1. diff --git a/Documentation/process/index.rst b/Documentation/process/index.rst index 82fc399..61e43cc 100644 --- a/Documentation/process/index.rst +++ b/Documentation/process/index.rst @@ -25,6 +25,7 @@ Below are the essential guides that every developer should read. submitting-patches coding-style email-clients + kernel-enforcement-statement Other guides to the community that are of interest to most developers are: diff --git a/Documentation/process/kernel-enforcement-statement.rst b/Documentation/process/kernel-enforcement-statement.rst new file mode 100644 index 0000000..b317067 --- /dev/null +++ b/Documentation/process/kernel-enforcement-statement.rst @@ -0,0 +1,157 @@ +Linux Kernel Enforcement Statement +---------------------------------- + +As developers of the Linux kernel, we have a keen interest in how our software +is used and how the license for our software is enforced. Compliance with the +reciprocal sharing obligations of GPL-2.0 is critical to the long-term +sustainability of our software and community. + +Although there is a right to enforce the separate copyright interests in the +contributions made to our community, we share an interest in ensuring that +individual enforcement actions are conducted in a manner that benefits our +community and do not have an unintended negative impact on the health and +growth of our software ecosystem. In order to deter unhelpful enforcement +actions, we agree that it is in the best interests of our development +community to undertake the following commitment to users of the Linux kernel +on behalf of ourselves and any successors to our copyright interests: + + Notwithstanding the termination provisions of the GPL-2.0, we agree that + it is in the best interests of our development community to adopt the + following provisions of GPL-3.0 as additional permissions under our + license with respect to any non-defensive assertion of rights under the + license. + + However, if you cease all violation of this License, then your license + from a particular copyright holder is reinstated (a) provisionally, + unless and until the copyright holder explicitly and finally + terminates your license, and (b) permanently, if the copyright holder + fails to notify you of the violation by some reasonable means prior to + 60 days after the cessation. + + Moreover, your license from a particular copyright holder is + reinstated permanently if the copyright holder notifies you of the + violation by some reasonable means, this is the first time you have + received notice of violation of this License (for any work) from that + copyright holder, and you cure the violation prior to 30 days after + your receipt of the notice. + +Our intent in providing these assurances is to encourage more use of the +software. We want companies and individuals to use, modify and distribute +this software. We want to work with users in an open and transparent way to +eliminate any uncertainty about our expectations regarding compliance or +enforcement that might limit adoption of our software. We view legal action +as a last resort, to be initiated only when other community efforts have +failed to resolve the problem. + +Finally, once a non-compliance issue is resolved, we hope the user will feel +welcome to join us in our efforts on this project. Working together, we will +be stronger. + +Except where noted below, we speak only for ourselves, and not for any company +we might work for today, have in the past, or will in the future. + + - Laura Abbott + - Bjorn Andersson (Linaro) + - Andrea Arcangeli + - Neil Armstrong + - Jens Axboe + - Pablo Neira Ayuso + - Khalid Aziz + - Ralf Baechle + - Felipe Balbi + - Arnd Bergmann + - Ard Biesheuvel + - Tim Bird + - Paolo Bonzini + - Christian Borntraeger + - Mark Brown (Linaro) + - Paul Burton + - Javier Martinez Canillas + - Rob Clark + - Jonathan Corbet + - Dennis Dalessandro + - Vivien Didelot (Savoir-faire Linux) + - Hans de Goede + - Mel Gorman (SUSE) + - Sven Eckelmann + - Alex Elder (Linaro) + - Fabio Estevam + - Larry Finger + - Bhumika Goyal + - Andy Gross + - Juergen Gross + - Shawn Guo + - Ulf Hansson + - Stephen Hemminger (Microsoft) + - Tejun Heo + - Rob Herring + - Masami Hiramatsu + - Michal Hocko + - Simon Horman + - Johan Hovold (Hovold Consulting AB) + - Christophe JAILLET + - Olof Johansson + - Lee Jones (Linaro) + - Heiner Kallweit + - Srinivas Kandagatla + - Jan Kara + - Shuah Khan (Samsung) + - David Kershner + - Jaegeuk Kim + - Namhyung Kim + - Colin Ian King + - Jeff Kirsher + - Greg Kroah-Hartman (Linux Foundation) + - Christian König + - Vinod Koul + - Krzysztof Kozlowski + - Viresh Kumar + - Aneesh Kumar K.V + - Julia Lawall + - Doug Ledford + - Chuck Lever (Oracle) + - Daniel Lezcano + - Shaohua Li + - Xin Long + - Tony Luck + - Catalin Marinas (Arm Ltd) + - Mike Marshall + - Chris Mason + - Paul E. McKenney + - David S. Miller + - Ingo Molnar + - Kuninori Morimoto + - Trond Myklebust + - Martin K. Petersen (Oracle) + - Borislav Petkov + - Jiri Pirko + - Josh Poimboeuf + - Sebastian Reichel (Collabora) + - Guenter Roeck + - Joerg Roedel + - Leon Romanovsky + - Steven Rostedt (VMware) + - Frank Rowand + - Ivan Safonov + - Anna Schumaker + - Jes Sorensen + - K.Y. Srinivasan + - Heiko Stuebner + - Jiri Kosina (SUSE) + - Willy Tarreau + - Dmitry Torokhov + - Linus Torvalds + - Thierry Reding + - Rik van Riel + - Geert Uytterhoeven (Glider bvba) + - Eduardo Valentin (Amazon.com) + - Daniel Vetter + - Linus Walleij + - Richard Weinberger + - Dan Williams + - Rafael J. Wysocki + - Arvind Yadav + - Masahiro Yamada + - Wei Yongjun + - Lv Zheng + - Marc Zyngier (Arm Ltd) diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index ce61d1f..694968c 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -75,6 +75,7 @@ show up in /proc/sys/kernel: - reboot-cmd [ SPARC only ] - rtsig-max - rtsig-nr +- seccomp/ ==> Documentation/userspace-api/seccomp_filter.rst - sem - sem_next_id [ sysv ipc ] - sg-big-buff [ generic SCSI device (sg) ] diff --git a/Documentation/userspace-api/seccomp_filter.rst b/Documentation/userspace-api/seccomp_filter.rst index f71eb5e..099c412 100644 --- a/Documentation/userspace-api/seccomp_filter.rst +++ b/Documentation/userspace-api/seccomp_filter.rst @@ -87,11 +87,16 @@ Return values A seccomp filter may return any of the following values. If multiple filters exist, the return value for the evaluation of a given system call will always use the highest precedent value. (For example, -``SECCOMP_RET_KILL`` will always take precedence.) +``SECCOMP_RET_KILL_PROCESS`` will always take precedence.) In precedence order, they are: -``SECCOMP_RET_KILL``: +``SECCOMP_RET_KILL_PROCESS``: + Results in the entire process exiting immediately without executing + the system call. The exit status of the task (``status & 0x7f``) + will be ``SIGSYS``, not ``SIGKILL``. + +``SECCOMP_RET_KILL_THREAD``: Results in the task exiting immediately without executing the system call. The exit status of the task (``status & 0x7f``) will be ``SIGSYS``, not ``SIGKILL``. @@ -141,6 +146,15 @@ In precedence order, they are: allow use of ptrace, even of other sandboxed processes, without extreme care; ptracers can use this mechanism to escape.) +``SECCOMP_RET_LOG``: + Results in the system call being executed after it is logged. This + should be used by application developers to learn which syscalls their + application needs without having to iterate through multiple test and + development cycles to build the list. + + This action will only be logged if "log" is present in the + actions_logged sysctl string. + ``SECCOMP_RET_ALLOW``: Results in the system call being executed. @@ -169,7 +183,41 @@ The ``samples/seccomp/`` directory contains both an x86-specific example and a more generic example of a higher level macro interface for BPF program generation. +Sysctls +======= +Seccomp's sysctl files can be found in the ``/proc/sys/kernel/seccomp/`` +directory. Here's a description of each file in that directory: + +``actions_avail``: + A read-only ordered list of seccomp return values (refer to the + ``SECCOMP_RET_*`` macros above) in string form. The ordering, from + left-to-right, is the least permissive return value to the most + permissive return value. + + The list represents the set of seccomp return values supported + by the kernel. A userspace program may use this list to + determine if the actions found in the ``seccomp.h``, when the + program was built, differs from the set of actions actually + supported in the current running kernel. + +``actions_logged``: + A read-write ordered list of seccomp return values (refer to the + ``SECCOMP_RET_*`` macros above) that are allowed to be logged. Writes + to the file do not need to be in ordered form but reads from the file + will be ordered in the same way as the actions_avail sysctl. + + It is important to note that the value of ``actions_logged`` does not + prevent certain actions from being logged when the audit subsystem is + configured to audit a task. If the action is not found in + ``actions_logged`` list, the final decision on whether to audit the + action for that task is ultimately left up to the audit subsystem to + decide for all seccomp return values other than ``SECCOMP_RET_ALLOW``. + + The ``allow`` string is not accepted in the ``actions_logged`` sysctl + as it is not possible to log ``SECCOMP_RET_ALLOW`` actions. Attempting + to write ``allow`` to the sysctl will result in an EINVAL being + returned. Adding architecture support =========================== |
