diff options
Diffstat (limited to 'Documentation/watchdog/watchdog-kernel-api.txt')
| -rw-r--r-- | Documentation/watchdog/watchdog-kernel-api.txt | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt new file mode 100644 index 0000000..4f7c894 --- /dev/null +++ b/Documentation/watchdog/watchdog-kernel-api.txt @@ -0,0 +1,162 @@ +The Linux WatchDog Timer Driver Core kernel API. +=============================================== +Last reviewed: 22-Jul-2011 + +Wim Van Sebroeck <wim@iguana.be> + +Introduction +------------ +This document does not describe what a WatchDog Timer (WDT) Driver or Device is. +It also does not describe the API which can be used by user space to communicate +with a WatchDog Timer. If you want to know this then please read the following +file: Documentation/watchdog/watchdog-api.txt . + +So what does this document describe? It describes the API that can be used by +WatchDog Timer Drivers that want to use the WatchDog Timer Driver Core +Framework. This framework provides all interfacing towards user space so that +the same code does not have to be reproduced each time. This also means that +a watchdog timer driver then only needs to provide the different routines +(operations) that control the watchdog timer (WDT). + +The API +------- +Each watchdog timer driver that wants to use the WatchDog Timer Driver Core +must #include <linux/watchdog.h> (you would have to do this anyway when +writing a watchdog device driver). This include file contains following +register/unregister routines: + +extern int watchdog_register_device(struct watchdog_device *); +extern void watchdog_unregister_device(struct watchdog_device *); + +The watchdog_register_device routine registers a watchdog timer device. +The parameter of this routine is a pointer to a watchdog_device structure. +This routine returns zero on success and a negative errno code for failure. + +The watchdog_unregister_device routine deregisters a registered watchdog timer +device. The parameter of this routine is the pointer to the registered +watchdog_device structure. + +The watchdog device structure looks like this: + +struct watchdog_device { + const struct watchdog_info *info; + const struct watchdog_ops *ops; + unsigned int bootstatus; + unsigned int timeout; + unsigned int min_timeout; + unsigned int max_timeout; + void *driver_data; + unsigned long status; +}; + +It contains following fields: +* info: a pointer to a watchdog_info structure. This structure gives some + additional information about the watchdog timer itself. (Like it's unique name) +* ops: a pointer to the list of watchdog operations that the watchdog supports. +* timeout: the watchdog timer's timeout value (in seconds). +* min_timeout: the watchdog timer's minimum timeout value (in seconds). +* max_timeout: the watchdog timer's maximum timeout value (in seconds). +* bootstatus: status of the device after booting (reported with watchdog + WDIOF_* status bits). +* driver_data: a pointer to the drivers private data of a watchdog device. + This data should only be accessed via the watchdog_set_drvadata and + watchdog_get_drvdata routines. +* status: this field contains a number of status bits that give extra + information about the status of the device (Like: is the watchdog timer + running/active, is the nowayout bit set, is the device opened via + the /dev/watchdog interface or not, ...). + +The list of watchdog operations is defined as: + +struct watchdog_ops { + struct module *owner; + /* mandatory operations */ + int (*start)(struct watchdog_device *); + int (*stop)(struct watchdog_device *); + /* optional operations */ + int (*ping)(struct watchdog_device *); + unsigned int (*status)(struct watchdog_device *); + int (*set_timeout)(struct watchdog_device *, unsigned int); + long (*ioctl)(struct watchdog_device *, unsigned int, unsigned long); +}; + +It is important that you first define the module owner of the watchdog timer +driver's operations. This module owner will be used to lock the module when +the watchdog is active. (This to avoid a system crash when you unload the +module and /dev/watchdog is still open). +Some operations are mandatory and some are optional. The mandatory operations +are: +* start: this is a pointer to the routine that starts the watchdog timer + device. + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. +* stop: with this routine the watchdog timer device is being stopped. + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. + Some watchdog timer hardware can only be started and not be stopped. The + driver supporting this hardware needs to make sure that a start and stop + routine is being provided. This can be done by using a timer in the driver + that regularly sends a keepalive ping to the watchdog timer hardware. + +Not all watchdog timer hardware supports the same functionality. That's why +all other routines/operations are optional. They only need to be provided if +they are supported. These optional routines/operations are: +* ping: this is the routine that sends a keepalive ping to the watchdog timer + hardware. + The routine needs a pointer to the watchdog timer device structure as a + parameter. It returns zero on success or a negative errno code for failure. + Most hardware that does not support this as a separate function uses the + start function to restart the watchdog timer hardware. And that's also what + the watchdog timer driver core does: to send a keepalive ping to the watchdog + timer hardware it will either use the ping operation (when available) or the + start operation (when the ping operation is not available). + (Note: the WDIOC_KEEPALIVE ioctl call will only be active when the + WDIOF_KEEPALIVEPING bit has been set in the option field on the watchdog's + info structure). +* status: this routine checks the status of the watchdog timer device. The + status of the device is reported with watchdog WDIOF_* status flags/bits. +* set_timeout: this routine checks and changes the timeout of the watchdog + timer device. It returns 0 on success, -EINVAL for "parameter out of range" + and -EIO for "could not write value to the watchdog". On success the timeout + value of the watchdog_device will be changed to the value that was just used + to re-program the watchdog timer device. + (Note: the WDIOF_SETTIMEOUT needs to be set in the options field of the + watchdog's info structure). +* ioctl: if this routine is present then it will be called first before we do + our own internal ioctl call handling. This routine should return -ENOIOCTLCMD + if a command is not supported. The parameters that are passed to the ioctl + call are: watchdog_device, cmd and arg. + +The status bits should (preferably) be set with the set_bit and clear_bit alike +bit-operations. The status bits that are defined are: +* WDOG_ACTIVE: this status bit indicates whether or not a watchdog timer device + is active or not. When the watchdog is active after booting, then you should + set this status bit (Note: when you register the watchdog timer device with + this bit set, then opening /dev/watchdog will skip the start operation) +* WDOG_DEV_OPEN: this status bit shows whether or not the watchdog device + was opened via /dev/watchdog. + (This bit should only be used by the WatchDog Timer Driver Core). +* WDOG_ALLOW_RELEASE: this bit stores whether or not the magic close character + has been sent (so that we can support the magic close feature). + (This bit should only be used by the WatchDog Timer Driver Core). +* WDOG_NO_WAY_OUT: this bit stores the nowayout setting for the watchdog. + If this bit is set then the watchdog timer will not be able to stop. + +Note: The WatchDog Timer Driver Core supports the magic close feature and +the nowayout feature. To use the magic close feature you must set the +WDIOF_MAGICCLOSE bit in the options field of the watchdog's info structure. +The nowayout feature will overrule the magic close feature. + +To get or set driver specific data the following two helper functions should be +used: + +static inline void watchdog_set_drvdata(struct watchdog_device *wdd, void *data) +static inline void *watchdog_get_drvdata(struct watchdog_device *wdd) + +The watchdog_set_drvdata function allows you to add driver specific data. The +arguments of this function are the watchdog device where you want to add the +driver specific data to and a pointer to the data itself. + +The watchdog_get_drvdata function allows you to retrieve driver specific data. +The argument of this function is the watchdog device where you want to retrieve +data from. The function retruns the pointer to the driver specific data. |
