summaryrefslogtreecommitdiffstats
path: root/Documentation/video4linux/w9968cf.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/video4linux/w9968cf.txt')
-rw-r--r--Documentation/video4linux/w9968cf.txt461
1 files changed, 461 insertions, 0 deletions
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt
new file mode 100644
index 0000000..3b704f2
--- /dev/null
+++ b/Documentation/video4linux/w9968cf.txt
@@ -0,0 +1,461 @@
+
+ W996[87]CF JPEG USB Dual Mode Camera Chip
+ Driver for Linux 2.6 (basic version)
+ =========================================
+
+ - Documentation -
+
+
+Index
+=====
+1. Copyright
+2. Disclaimer
+3. License
+4. Overview
+5. Supported devices
+6. Module dependencies
+7. Module loading
+8. Module paramaters
+9. Contact information
+10. Credits
+
+
+1. Copyright
+============
+Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it>
+
+
+2. Disclaimer
+=============
+Winbond is a trademark of Winbond Electronics Corporation.
+This software is not sponsored or developed by Winbond.
+
+
+3. License
+==========
+This program is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+
+4. Overview
+===========
+This driver supports the video streaming capabilities of the devices mounting
+Winbond W9967CF and Winbond W9968CF JPEG USB Dual Mode Camera Chips. OV681
+based cameras should be supported as well.
+
+The driver is divided into two modules: the basic one, "w9968cf", is needed for
+the supported devices to work; the second one, "w9968cf-vpp", is an optional
+module, which provides some useful video post-processing functions like video
+decoding, up-scaling and colour conversions.
+
+Note that the official kernels do neither include nor support the second
+module for performance purposes. Therefore, it is always recommended to
+download and install the latest and complete release of the driver,
+replacing the existing one, if present.
+
+The latest and full-featured version of the W996[87]CF driver can be found at:
+http://www.linux-projects.org. Please refer to the documentation included in
+that package, if you are going to use it.
+
+Up to 32 cameras can be handled at the same time. They can be connected and
+disconnected from the host many times without turning off the computer, if
+your system supports the hotplug facility.
+
+To change the default settings for each camera, many parameters can be passed
+through command line when the module is loaded into memory.
+
+The driver relies on the Video4Linux, USB and I2C core modules. It has been
+designed to run properly on SMP systems as well. An additional module,
+"ovcamchip", is mandatory; it provides support for some OmniVision image
+sensors connected to the W996[87]CF chips; if found in the system, the module
+will be automatically loaded by default (provided that the kernel has been
+compiled with the automatic module loading option).
+
+
+5. Supported devices
+====================
+At the moment, known W996[87]CF and OV681 based devices are:
+- Aroma Digi Pen VGA Dual Mode ADG-5000 (unknown image sensor)
+- AVerMedia AVerTV USB (SAA7111A, Philips FI1216Mk2 tuner, PT2313L audio chip)
+- Creative Labs Video Blaster WebCam Go (OmniVision OV7610 sensor)
+- Creative Labs Video Blaster WebCam Go Plus (OmniVision OV7620 sensor)
+- Lebon LDC-035A (unknown image sensor)
+- Ezonics EZ-802 EZMega Cam (OmniVision OV8610C sensor)
+- OmniVision OV8610-EDE (OmniVision OV8610 sensor)
+- OPCOM Digi Pen VGA Dual Mode Pen Camera (unknown image sensor)
+- Pretec Digi Pen-II (OmniVision OV7620 sensor)
+- Pretec DigiPen-480 (OmniVision OV8610 sensor)
+
+If you know any other W996[87]CF or OV681 based cameras, please contact me.
+
+The list above does not imply that all those devices work with this driver: up
+until now only webcams that have an image sensor supported by the "ovcamchip"
+module work. Kernel messages will always tell you whether this is case.
+
+Possible external microcontrollers of those webcams are not supported: this
+means that still images cannot be downloaded from the device memory.
+
+Furthermore, it's worth to note that I was only able to run tests on my
+"Creative Labs Video Blaster WebCam Go". Donations of other models, for
+additional testing and full support, would be much appreciated.
+
+
+6. Module dependencies
+======================
+For it to work properly, the driver needs kernel support for Video4Linux, USB
+and I2C, and the "ovcamchip" module for the image sensor. Make sure you are not
+actually using any external "ovcamchip" module, given that the W996[87]CF
+driver depends on the version of the module present in the official kernels.
+
+The following options of the kernel configuration file must be enabled and
+corresponding modules must be compiled:
+
+ # Multimedia devices
+ #
+ CONFIG_VIDEO_DEV=m
+
+ # I2C support
+ #
+ CONFIG_I2C=m
+
+The I2C core module can be compiled statically in the kernel as well.
+
+ # OmniVision Camera Chip support
+ #
+ CONFIG_VIDEO_OVCAMCHIP=m
+
+ # USB support
+ #
+ CONFIG_USB=m
+
+In addition, depending on the hardware being used, only one of the modules
+below is necessary:
+
+ # USB Host Controller Drivers
+ #
+ CONFIG_USB_EHCI_HCD=m
+ CONFIG_USB_UHCI_HCD=m
+ CONFIG_USB_OHCI_HCD=m
+
+And finally:
+
+ # USB Multimedia devices
+ #
+ CONFIG_USB_W9968CF=m
+
+
+7. Module loading
+=================
+To use the driver, it is necessary to load the "w9968cf" module into memory
+after every other module required.
+
+Loading can be done this way, from root:
+
+ [root@localhost home]# modprobe usbcore
+ [root@localhost home]# modprobe i2c-core
+ [root@localhost home]# modprobe videodev
+ [root@localhost home]# modprobe w9968cf
+
+At this point the pertinent devices should be recognized: "dmesg" can be used
+to analyze kernel messages:
+
+ [user@localhost home]$ dmesg
+
+There are a lot of parameters the module can use to change the default
+settings for each device. To list every possible parameter with a brief
+explanation about them and which syntax to use, it is recommended to run the
+"modinfo" command:
+
+ [root@locahost home]# modinfo w9968cf
+
+
+8. Module parameters
+====================
+Module parameters are listed below:
+-------------------------------------------------------------------------------
+Name: ovmod_load
+Type: bool
+Syntax: <0|1>
+Description: Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled.
+ If enabled, 'insmod' searches for the required 'ovcamchip'
+ module in the system, according to its configuration, and
+ loads that module automatically. This action is performed as
+ once soon as the 'w9968cf' module is loaded into memory.
+Default: 1
+Note: The kernel must be compiled with the CONFIG_KMOD option
+ enabled for the 'ovcamchip' module to be loaded and for
+ this parameter to be present.
+-------------------------------------------------------------------------------
+Name: simcams
+Type: int
+Syntax: <n>
+Description: Number of cameras allowed to stream simultaneously.
+ n may vary from 0 to 32.
+Default: 32
+-------------------------------------------------------------------------------
+Name: video_nr
+Type: int array (min = 0, max = 32)
+Syntax: <-1|n[,...]>
+Description: Specify V4L minor mode number.
+ -1 = use next available
+ n = use minor number n
+ You can specify up to 32 cameras this way.
+ For example:
+ video_nr=-1,2,-1 would assign minor number 2 to the second
+ recognized camera and use auto for the first one and for every
+ other camera.
+Default: -1
+-------------------------------------------------------------------------------
+Name: packet_size
+Type: int array (min = 0, max = 32)
+Syntax: <n[,...]>
+Description: Specify the maximum data payload size in bytes for alternate
+ settings, for each device. n is scaled between 63 and 1023.
+Default: 1023
+-------------------------------------------------------------------------------
+Name: max_buffers
+Type: int array (min = 0, max = 32)
+Syntax: <n[,...]>
+Description: For advanced users.
+ Specify the maximum number of video frame buffers to allocate
+ for each device, from 2 to 32.
+Default: 2
+-------------------------------------------------------------------------------
+Name: double_buffer
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Hardware double buffering: 0 disabled, 1 enabled.
+ It should be enabled if you want smooth video output: if you
+ obtain out of sync. video, disable it, or try to
+ decrease the 'clockdiv' module parameter value.
+Default: 1 for every device.
+-------------------------------------------------------------------------------
+Name: clamping
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Video data clamping: 0 disabled, 1 enabled.
+Default: 0 for every device.
+-------------------------------------------------------------------------------
+Name: filter_type
+Type: int array (min = 0, max = 32)
+Syntax: <0|1|2[,...]>
+Description: Video filter type.
+ 0 none, 1 (1-2-1) 3-tap filter, 2 (2-3-6-3-2) 5-tap filter.
+ The filter is used to reduce noise and aliasing artifacts
+ produced by the CCD or CMOS image sensor.
+Default: 0 for every device.
+-------------------------------------------------------------------------------
+Name: largeview
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Large view: 0 disabled, 1 enabled.
+Default: 1 for every device.
+-------------------------------------------------------------------------------
+Name: upscaling
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Software scaling (for non-compressed video only):
+ 0 disabled, 1 enabled.
+ Disable it if you have a slow CPU or you don't have enough
+ memory.
+Default: 0 for every device.
+Note: If 'w9968cf-vpp' is not present, this parameter is set to 0.
+-------------------------------------------------------------------------------
+Name: decompression
+Type: int array (min = 0, max = 32)
+Syntax: <0|1|2[,...]>
+Description: Software video decompression:
+ 0 = disables decompression
+ (doesn't allow formats needing decompression).
+ 1 = forces decompression
+ (allows formats needing decompression only).
+ 2 = allows any permitted formats.
+ Formats supporting (de)compressed video are YUV422P and
+ YUV420P/YUV420 in any resolutions where width and height are
+ multiples of 16.
+Default: 2 for every device.
+Note: If 'w9968cf-vpp' is not present, forcing decompression is not
+ allowed; in this case this parameter is set to 2.
+-------------------------------------------------------------------------------
+Name: force_palette
+Type: int array (min = 0, max = 32)
+Syntax: <0|9|10|13|15|8|7|1|6|3|4|5[,...]>
+Description: Force picture palette.
+ In order:
+ 0 = Off - allows any of the following formats:
+ 9 = UYVY 16 bpp - Original video, compression disabled
+ 10 = YUV420 12 bpp - Original video, compression enabled
+ 13 = YUV422P 16 bpp - Original video, compression enabled
+ 15 = YUV420P 12 bpp - Original video, compression enabled
+ 8 = YUVY 16 bpp - Software conversion from UYVY
+ 7 = YUV422 16 bpp - Software conversion from UYVY
+ 1 = GREY 8 bpp - Software conversion from UYVY
+ 6 = RGB555 16 bpp - Software conversion from UYVY
+ 3 = RGB565 16 bpp - Software conversion from UYVY
+ 4 = RGB24 24 bpp - Software conversion from UYVY
+ 5 = RGB32 32 bpp - Software conversion from UYVY
+ When not 0, this parameter will override 'decompression'.
+Default: 0 for every device. Initial palette is 9 (UYVY).
+Note: If 'w9968cf-vpp' is not present, this parameter is set to 9.
+-------------------------------------------------------------------------------
+Name: force_rgb
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Read RGB video data instead of BGR:
+ 1 = use RGB component ordering.
+ 0 = use BGR component ordering.
+ This parameter has effect when using RGBX palettes only.
+Default: 0 for every device.
+-------------------------------------------------------------------------------
+Name: autobright
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Image sensor automatically changes brightness:
+ 0 = no, 1 = yes
+Default: 0 for every device.
+-------------------------------------------------------------------------------
+Name: autoexp
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Image sensor automatically changes exposure:
+ 0 = no, 1 = yes
+Default: 1 for every device.
+-------------------------------------------------------------------------------
+Name: lightfreq
+Type: int array (min = 0, max = 32)
+Syntax: <50|60[,...]>
+Description: Light frequency in Hz:
+ 50 for European and Asian lighting, 60 for American lighting.
+Default: 50 for every device.
+-------------------------------------------------------------------------------
+Name: bandingfilter
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Banding filter to reduce effects of fluorescent
+ lighting:
+ 0 disabled, 1 enabled.
+ This filter tries to reduce the pattern of horizontal
+ light/dark bands caused by some (usually fluorescent) lighting.
+Default: 0 for every device.
+-------------------------------------------------------------------------------
+Name: clockdiv
+Type: int array (min = 0, max = 32)
+Syntax: <-1|n[,...]>
+Description: Force pixel clock divisor to a specific value (for experts):
+ n may vary from 0 to 127.
+ -1 for automatic value.
+ See also the 'double_buffer' module parameter.
+Default: -1 for every device.
+-------------------------------------------------------------------------------
+Name: backlight
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Objects are lit from behind:
+ 0 = no, 1 = yes
+Default: 0 for every device.
+-------------------------------------------------------------------------------
+Name: mirror
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: Reverse image horizontally:
+ 0 = no, 1 = yes
+Default: 0 for every device.
+-------------------------------------------------------------------------------
+Name: monochrome
+Type: bool array (min = 0, max = 32)
+Syntax: <0|1[,...]>
+Description: The image sensor is monochrome:
+ 0 = no, 1 = yes
+Default: 0 for every device.
+-------------------------------------------------------------------------------
+Name: brightness
+Type: long array (min = 0, max = 32)
+Syntax: <n[,...]>
+Description: Set picture brightness (0-65535).
+ This parameter has no effect if 'autobright' is enabled.
+Default: 31000 for every device.
+-------------------------------------------------------------------------------
+Name: hue
+Type: long array (min = 0, max = 32)
+Syntax: <n[,...]>
+Description: Set picture hue (0-65535).
+Default: 32768 for every device.
+-------------------------------------------------------------------------------
+Name: colour
+Type: long array (min = 0, max = 32)
+Syntax: <n[,...]>
+Description: Set picture saturation (0-65535).
+Default: 32768 for every device.
+-------------------------------------------------------------------------------
+Name: contrast
+Type: long array (min = 0, max = 32)
+Syntax: <n[,...]>
+Description: Set picture contrast (0-65535).
+Default: 50000 for every device.
+-------------------------------------------------------------------------------
+Name: whiteness
+Type: long array (min = 0, max = 32)
+Syntax: <n[,...]>
+Description: Set picture whiteness (0-65535).
+Default: 32768 for every device.
+-------------------------------------------------------------------------------
+Name: debug
+Type: int
+Syntax: <n>
+Description: Debugging information level, from 0 to 6:
+ 0 = none (use carefully)
+ 1 = critical errors
+ 2 = significant informations
+ 3 = configuration or general messages
+ 4 = warnings
+ 5 = called functions
+ 6 = function internals
+ Level 5 and 6 are useful for testing only, when only one
+ device is used.
+Default: 2
+-------------------------------------------------------------------------------
+Name: specific_debug
+Type: bool
+Syntax: <0|1>
+Description: Enable or disable specific debugging messages:
+ 0 = print messages concerning every level <= 'debug' level.
+ 1 = print messages concerning the level indicated by 'debug'.
+Default: 0
+-------------------------------------------------------------------------------
+
+
+9. Contact information
+======================
+I may be contacted by e-mail at <luca.risolia@studio.unibo.it>.
+
+I can accept GPG/PGP encrypted e-mail. My GPG key ID is 'FCE635A4'.
+My public 1024-bit key should be available at your keyserver; the fingerprint
+is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'.
+
+
+10. Credits
+==========
+The development would not have proceed much further without having looked at
+the source code of other drivers and without the help of several persons; in
+particular:
+
+- the I2C interface to kernel and high-level image sensor control routines have
+ been taken from the OV511 driver by Mark McClelland;
+
+- memory management code has been copied from the bttv driver by Ralph Metzler,
+ Marcus Metzler and Gerd Knorr;
+
+- the low-level I2C read function has been written by Frederic Jouault;
+
+- the low-level I2C fast write function has been written by Piotr Czerczak.
OpenPOWER on IntegriCloud