diff options
Diffstat (limited to 'Documentation/video4linux/w9968cf.txt')
| -rw-r--r-- | Documentation/video4linux/w9968cf.txt | 461 |
1 files changed, 461 insertions, 0 deletions
diff --git a/Documentation/video4linux/w9968cf.txt b/Documentation/video4linux/w9968cf.txt new file mode 100644 index 0000000..3b704f2 --- /dev/null +++ b/Documentation/video4linux/w9968cf.txt @@ -0,0 +1,461 @@ + + W996[87]CF JPEG USB Dual Mode Camera Chip + Driver for Linux 2.6 (basic version) + ========================================= + + - Documentation - + + +Index +===== +1. Copyright +2. Disclaimer +3. License +4. Overview +5. Supported devices +6. Module dependencies +7. Module loading +8. Module paramaters +9. Contact information +10. Credits + + +1. Copyright +============ +Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> + + +2. Disclaimer +============= +Winbond is a trademark of Winbond Electronics Corporation. +This software is not sponsored or developed by Winbond. + + +3. License +========== +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + +4. Overview +=========== +This driver supports the video streaming capabilities of the devices mounting +Winbond W9967CF and Winbond W9968CF JPEG USB Dual Mode Camera Chips. OV681 +based cameras should be supported as well. + +The driver is divided into two modules: the basic one, "w9968cf", is needed for +the supported devices to work; the second one, "w9968cf-vpp", is an optional +module, which provides some useful video post-processing functions like video +decoding, up-scaling and colour conversions. + +Note that the official kernels do neither include nor support the second +module for performance purposes. Therefore, it is always recommended to +download and install the latest and complete release of the driver, +replacing the existing one, if present. + +The latest and full-featured version of the W996[87]CF driver can be found at: +http://www.linux-projects.org. Please refer to the documentation included in +that package, if you are going to use it. + +Up to 32 cameras can be handled at the same time. They can be connected and +disconnected from the host many times without turning off the computer, if +your system supports the hotplug facility. + +To change the default settings for each camera, many parameters can be passed +through command line when the module is loaded into memory. + +The driver relies on the Video4Linux, USB and I2C core modules. It has been +designed to run properly on SMP systems as well. An additional module, +"ovcamchip", is mandatory; it provides support for some OmniVision image +sensors connected to the W996[87]CF chips; if found in the system, the module +will be automatically loaded by default (provided that the kernel has been +compiled with the automatic module loading option). + + +5. Supported devices +==================== +At the moment, known W996[87]CF and OV681 based devices are: +- Aroma Digi Pen VGA Dual Mode ADG-5000 (unknown image sensor) +- AVerMedia AVerTV USB (SAA7111A, Philips FI1216Mk2 tuner, PT2313L audio chip) +- Creative Labs Video Blaster WebCam Go (OmniVision OV7610 sensor) +- Creative Labs Video Blaster WebCam Go Plus (OmniVision OV7620 sensor) +- Lebon LDC-035A (unknown image sensor) +- Ezonics EZ-802 EZMega Cam (OmniVision OV8610C sensor) +- OmniVision OV8610-EDE (OmniVision OV8610 sensor) +- OPCOM Digi Pen VGA Dual Mode Pen Camera (unknown image sensor) +- Pretec Digi Pen-II (OmniVision OV7620 sensor) +- Pretec DigiPen-480 (OmniVision OV8610 sensor) + +If you know any other W996[87]CF or OV681 based cameras, please contact me. + +The list above does not imply that all those devices work with this driver: up +until now only webcams that have an image sensor supported by the "ovcamchip" +module work. Kernel messages will always tell you whether this is case. + +Possible external microcontrollers of those webcams are not supported: this +means that still images cannot be downloaded from the device memory. + +Furthermore, it's worth to note that I was only able to run tests on my +"Creative Labs Video Blaster WebCam Go". Donations of other models, for +additional testing and full support, would be much appreciated. + + +6. Module dependencies +====================== +For it to work properly, the driver needs kernel support for Video4Linux, USB +and I2C, and the "ovcamchip" module for the image sensor. Make sure you are not +actually using any external "ovcamchip" module, given that the W996[87]CF +driver depends on the version of the module present in the official kernels. + +The following options of the kernel configuration file must be enabled and +corresponding modules must be compiled: + + # Multimedia devices + # + CONFIG_VIDEO_DEV=m + + # I2C support + # + CONFIG_I2C=m + +The I2C core module can be compiled statically in the kernel as well. + + # OmniVision Camera Chip support + # + CONFIG_VIDEO_OVCAMCHIP=m + + # USB support + # + CONFIG_USB=m + +In addition, depending on the hardware being used, only one of the modules +below is necessary: + + # USB Host Controller Drivers + # + CONFIG_USB_EHCI_HCD=m + CONFIG_USB_UHCI_HCD=m + CONFIG_USB_OHCI_HCD=m + +And finally: + + # USB Multimedia devices + # + CONFIG_USB_W9968CF=m + + +7. Module loading +================= +To use the driver, it is necessary to load the "w9968cf" module into memory +after every other module required. + +Loading can be done this way, from root: + + [root@localhost home]# modprobe usbcore + [root@localhost home]# modprobe i2c-core + [root@localhost home]# modprobe videodev + [root@localhost home]# modprobe w9968cf + +At this point the pertinent devices should be recognized: "dmesg" can be used +to analyze kernel messages: + + [user@localhost home]$ dmesg + +There are a lot of parameters the module can use to change the default +settings for each device. To list every possible parameter with a brief +explanation about them and which syntax to use, it is recommended to run the +"modinfo" command: + + [root@locahost home]# modinfo w9968cf + + +8. Module parameters +==================== +Module parameters are listed below: +------------------------------------------------------------------------------- +Name: ovmod_load +Type: bool +Syntax: <0|1> +Description: Automatic 'ovcamchip' module loading: 0 disabled, 1 enabled. + If enabled, 'insmod' searches for the required 'ovcamchip' + module in the system, according to its configuration, and + loads that module automatically. This action is performed as + once soon as the 'w9968cf' module is loaded into memory. +Default: 1 +Note: The kernel must be compiled with the CONFIG_KMOD option + enabled for the 'ovcamchip' module to be loaded and for + this parameter to be present. +------------------------------------------------------------------------------- +Name: simcams +Type: int +Syntax: <n> +Description: Number of cameras allowed to stream simultaneously. + n may vary from 0 to 32. +Default: 32 +------------------------------------------------------------------------------- +Name: video_nr +Type: int array (min = 0, max = 32) +Syntax: <-1|n[,...]> +Description: Specify V4L minor mode number. + -1 = use next available + n = use minor number n + You can specify up to 32 cameras this way. + For example: + video_nr=-1,2,-1 would assign minor number 2 to the second + recognized camera and use auto for the first one and for every + other camera. +Default: -1 +------------------------------------------------------------------------------- +Name: packet_size +Type: int array (min = 0, max = 32) +Syntax: <n[,...]> +Description: Specify the maximum data payload size in bytes for alternate + settings, for each device. n is scaled between 63 and 1023. +Default: 1023 +------------------------------------------------------------------------------- +Name: max_buffers +Type: int array (min = 0, max = 32) +Syntax: <n[,...]> +Description: For advanced users. + Specify the maximum number of video frame buffers to allocate + for each device, from 2 to 32. +Default: 2 +------------------------------------------------------------------------------- +Name: double_buffer +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Hardware double buffering: 0 disabled, 1 enabled. + It should be enabled if you want smooth video output: if you + obtain out of sync. video, disable it, or try to + decrease the 'clockdiv' module parameter value. +Default: 1 for every device. +------------------------------------------------------------------------------- +Name: clamping +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Video data clamping: 0 disabled, 1 enabled. +Default: 0 for every device. +------------------------------------------------------------------------------- +Name: filter_type +Type: int array (min = 0, max = 32) +Syntax: <0|1|2[,...]> +Description: Video filter type. + 0 none, 1 (1-2-1) 3-tap filter, 2 (2-3-6-3-2) 5-tap filter. + The filter is used to reduce noise and aliasing artifacts + produced by the CCD or CMOS image sensor. +Default: 0 for every device. +------------------------------------------------------------------------------- +Name: largeview +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Large view: 0 disabled, 1 enabled. +Default: 1 for every device. +------------------------------------------------------------------------------- +Name: upscaling +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Software scaling (for non-compressed video only): + 0 disabled, 1 enabled. + Disable it if you have a slow CPU or you don't have enough + memory. +Default: 0 for every device. +Note: If 'w9968cf-vpp' is not present, this parameter is set to 0. +------------------------------------------------------------------------------- +Name: decompression +Type: int array (min = 0, max = 32) +Syntax: <0|1|2[,...]> +Description: Software video decompression: + 0 = disables decompression + (doesn't allow formats needing decompression). + 1 = forces decompression + (allows formats needing decompression only). + 2 = allows any permitted formats. + Formats supporting (de)compressed video are YUV422P and + YUV420P/YUV420 in any resolutions where width and height are + multiples of 16. +Default: 2 for every device. +Note: If 'w9968cf-vpp' is not present, forcing decompression is not + allowed; in this case this parameter is set to 2. +------------------------------------------------------------------------------- +Name: force_palette +Type: int array (min = 0, max = 32) +Syntax: <0|9|10|13|15|8|7|1|6|3|4|5[,...]> +Description: Force picture palette. + In order: + 0 = Off - allows any of the following formats: + 9 = UYVY 16 bpp - Original video, compression disabled + 10 = YUV420 12 bpp - Original video, compression enabled + 13 = YUV422P 16 bpp - Original video, compression enabled + 15 = YUV420P 12 bpp - Original video, compression enabled + 8 = YUVY 16 bpp - Software conversion from UYVY + 7 = YUV422 16 bpp - Software conversion from UYVY + 1 = GREY 8 bpp - Software conversion from UYVY + 6 = RGB555 16 bpp - Software conversion from UYVY + 3 = RGB565 16 bpp - Software conversion from UYVY + 4 = RGB24 24 bpp - Software conversion from UYVY + 5 = RGB32 32 bpp - Software conversion from UYVY + When not 0, this parameter will override 'decompression'. +Default: 0 for every device. Initial palette is 9 (UYVY). +Note: If 'w9968cf-vpp' is not present, this parameter is set to 9. +------------------------------------------------------------------------------- +Name: force_rgb +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Read RGB video data instead of BGR: + 1 = use RGB component ordering. + 0 = use BGR component ordering. + This parameter has effect when using RGBX palettes only. +Default: 0 for every device. +------------------------------------------------------------------------------- +Name: autobright +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Image sensor automatically changes brightness: + 0 = no, 1 = yes +Default: 0 for every device. +------------------------------------------------------------------------------- +Name: autoexp +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Image sensor automatically changes exposure: + 0 = no, 1 = yes +Default: 1 for every device. +------------------------------------------------------------------------------- +Name: lightfreq +Type: int array (min = 0, max = 32) +Syntax: <50|60[,...]> +Description: Light frequency in Hz: + 50 for European and Asian lighting, 60 for American lighting. +Default: 50 for every device. +------------------------------------------------------------------------------- +Name: bandingfilter +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Banding filter to reduce effects of fluorescent + lighting: + 0 disabled, 1 enabled. + This filter tries to reduce the pattern of horizontal + light/dark bands caused by some (usually fluorescent) lighting. +Default: 0 for every device. +------------------------------------------------------------------------------- +Name: clockdiv +Type: int array (min = 0, max = 32) +Syntax: <-1|n[,...]> +Description: Force pixel clock divisor to a specific value (for experts): + n may vary from 0 to 127. + -1 for automatic value. + See also the 'double_buffer' module parameter. +Default: -1 for every device. +------------------------------------------------------------------------------- +Name: backlight +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Objects are lit from behind: + 0 = no, 1 = yes +Default: 0 for every device. +------------------------------------------------------------------------------- +Name: mirror +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: Reverse image horizontally: + 0 = no, 1 = yes +Default: 0 for every device. +------------------------------------------------------------------------------- +Name: monochrome +Type: bool array (min = 0, max = 32) +Syntax: <0|1[,...]> +Description: The image sensor is monochrome: + 0 = no, 1 = yes +Default: 0 for every device. +------------------------------------------------------------------------------- +Name: brightness +Type: long array (min = 0, max = 32) +Syntax: <n[,...]> +Description: Set picture brightness (0-65535). + This parameter has no effect if 'autobright' is enabled. +Default: 31000 for every device. +------------------------------------------------------------------------------- +Name: hue +Type: long array (min = 0, max = 32) +Syntax: <n[,...]> +Description: Set picture hue (0-65535). +Default: 32768 for every device. +------------------------------------------------------------------------------- +Name: colour +Type: long array (min = 0, max = 32) +Syntax: <n[,...]> +Description: Set picture saturation (0-65535). +Default: 32768 for every device. +------------------------------------------------------------------------------- +Name: contrast +Type: long array (min = 0, max = 32) +Syntax: <n[,...]> +Description: Set picture contrast (0-65535). +Default: 50000 for every device. +------------------------------------------------------------------------------- +Name: whiteness +Type: long array (min = 0, max = 32) +Syntax: <n[,...]> +Description: Set picture whiteness (0-65535). +Default: 32768 for every device. +------------------------------------------------------------------------------- +Name: debug +Type: int +Syntax: <n> +Description: Debugging information level, from 0 to 6: + 0 = none (use carefully) + 1 = critical errors + 2 = significant informations + 3 = configuration or general messages + 4 = warnings + 5 = called functions + 6 = function internals + Level 5 and 6 are useful for testing only, when only one + device is used. +Default: 2 +------------------------------------------------------------------------------- +Name: specific_debug +Type: bool +Syntax: <0|1> +Description: Enable or disable specific debugging messages: + 0 = print messages concerning every level <= 'debug' level. + 1 = print messages concerning the level indicated by 'debug'. +Default: 0 +------------------------------------------------------------------------------- + + +9. Contact information +====================== +I may be contacted by e-mail at <luca.risolia@studio.unibo.it>. + +I can accept GPG/PGP encrypted e-mail. My GPG key ID is 'FCE635A4'. +My public 1024-bit key should be available at your keyserver; the fingerprint +is: '88E8 F32F 7244 68BA 3958 5D40 99DA 5D2A FCE6 35A4'. + + +10. Credits +========== +The development would not have proceed much further without having looked at +the source code of other drivers and without the help of several persons; in +particular: + +- the I2C interface to kernel and high-level image sensor control routines have + been taken from the OV511 driver by Mark McClelland; + +- memory management code has been copied from the bttv driver by Ralph Metzler, + Marcus Metzler and Gerd Knorr; + +- the low-level I2C read function has been written by Frederic Jouault; + +- the low-level I2C fast write function has been written by Piotr Czerczak. |
