diff options
Diffstat (limited to 'Documentation/usb/URB.txt')
| -rw-r--r-- | Documentation/usb/URB.txt | 252 |
1 files changed, 252 insertions, 0 deletions
diff --git a/Documentation/usb/URB.txt b/Documentation/usb/URB.txt new file mode 100644 index 0000000..d59b95c --- /dev/null +++ b/Documentation/usb/URB.txt @@ -0,0 +1,252 @@ +Revised: 2000-Dec-05. +Again: 2002-Jul-06 + + NOTE: + + The USB subsystem now has a substantial section in "The Linux Kernel API" + guide (in Documentation/DocBook), generated from the current source + code. This particular documentation file isn't particularly current or + complete; don't rely on it except for a quick overview. + + +1.1. Basic concept or 'What is an URB?' + +The basic idea of the new driver is message passing, the message itself is +called USB Request Block, or URB for short. + +- An URB consists of all relevant information to execute any USB transaction + and deliver the data and status back. + +- Execution of an URB is inherently an asynchronous operation, i.e. the + usb_submit_urb(urb) call returns immediately after it has successfully queued + the requested action. + +- Transfers for one URB can be canceled with usb_unlink_urb(urb) at any time. + +- Each URB has a completion handler, which is called after the action + has been successfully completed or canceled. The URB also contains a + context-pointer for passing information to the completion handler. + +- Each endpoint for a device logically supports a queue of requests. + You can fill that queue, so that the USB hardware can still transfer + data to an endpoint while your driver handles completion of another. + This maximizes use of USB bandwidth, and supports seamless streaming + of data to (or from) devices when using periodic transfer modes. + + +1.2. The URB structure + +Some of the fields in an URB are: + +struct urb +{ +// (IN) device and pipe specify the endpoint queue + struct usb_device *dev; // pointer to associated USB device + unsigned int pipe; // endpoint information + + unsigned int transfer_flags; // ISO_ASAP, SHORT_NOT_OK, etc. + +// (IN) all urbs need completion routines + void *context; // context for completion routine + void (*complete)(struct urb *); // pointer to completion routine + +// (OUT) status after each completion + int status; // returned status + +// (IN) buffer used for data transfers + void *transfer_buffer; // associated data buffer + int transfer_buffer_length; // data buffer length + int number_of_packets; // size of iso_frame_desc + +// (OUT) sometimes only part of CTRL/BULK/INTR transfer_buffer is used + int actual_length; // actual data buffer length + +// (IN) setup stage for CTRL (pass a struct usb_ctrlrequest) + unsigned char* setup_packet; // setup packet (control only) + +// Only for PERIODIC transfers (ISO, INTERRUPT) + // (IN/OUT) start_frame is set unless ISO_ASAP isn't set + int start_frame; // start frame + int interval; // polling interval + + // ISO only: packets are only "best effort"; each can have errors + int error_count; // number of errors + struct usb_iso_packet_descriptor iso_frame_desc[0]; +}; + +Your driver must create the "pipe" value using values from the appropriate +endpoint descriptor in an interface that it's claimed. + + +1.3. How to get an URB? + +URBs are allocated with the following call + + struct urb *usb_alloc_urb(int isoframes, int mem_flags) + +Return value is a pointer to the allocated URB, 0 if allocation failed. +The parameter isoframes specifies the number of isochronous transfer frames +you want to schedule. For CTRL/BULK/INT, use 0. The mem_flags parameter +holds standard memory allocation flags, letting you control (among other +things) whether the underlying code may block or not. + +To free an URB, use + + void usb_free_urb(struct urb *urb) + +You may not free an urb that you've submitted, but which hasn't yet been +returned to you in a completion callback. + + +1.4. What has to be filled in? + +Depending on the type of transaction, there are some inline functions +defined in <linux/usb.h> to simplify the initialization, such as +fill_control_urb() and fill_bulk_urb(). In general, they need the usb +device pointer, the pipe (usual format from usb.h), the transfer buffer, +the desired transfer length, the completion handler, and its context. +Take a look at the some existing drivers to see how they're used. + +Flags: +For ISO there are two startup behaviors: Specified start_frame or ASAP. +For ASAP set URB_ISO_ASAP in transfer_flags. + +If short packets should NOT be tolerated, set URB_SHORT_NOT_OK in +transfer_flags. + + +1.5. How to submit an URB? + +Just call + + int usb_submit_urb(struct urb *urb, int mem_flags) + +The mem_flags parameter, such as SLAB_ATOMIC, controls memory allocation, +such as whether the lower levels may block when memory is tight. + +It immediately returns, either with status 0 (request queued) or some +error code, usually caused by the following: + +- Out of memory (-ENOMEM) +- Unplugged device (-ENODEV) +- Stalled endpoint (-EPIPE) +- Too many queued ISO transfers (-EAGAIN) +- Too many requested ISO frames (-EFBIG) +- Invalid INT interval (-EINVAL) +- More than one packet for INT (-EINVAL) + +After submission, urb->status is -EINPROGRESS; however, you should never +look at that value except in your completion callback. + +For isochronous endpoints, your completion handlers should (re)submit +URBs to the same endpoint with the ISO_ASAP flag, using multi-buffering, +to get seamless ISO streaming. + + +1.6. How to cancel an already running URB? + +For an URB which you've submitted, but which hasn't been returned to +your driver by the host controller, call + + int usb_unlink_urb(struct urb *urb) + +It removes the urb from the internal list and frees all allocated +HW descriptors. The status is changed to reflect unlinking. After +usb_unlink_urb() returns with that status code, you can free the URB +with usb_free_urb(). + +There is also an asynchronous unlink mode. To use this, set the +the URB_ASYNC_UNLINK flag in urb->transfer flags before calling +usb_unlink_urb(). When using async unlinking, the URB will not +normally be unlinked when usb_unlink_urb() returns. Instead, wait +for the completion handler to be called. + + +1.7. What about the completion handler? + +The handler is of the following type: + + typedef void (*usb_complete_t)(struct urb *); + +i.e. it gets just the URB that caused the completion call. +In the completion handler, you should have a look at urb->status to +detect any USB errors. Since the context parameter is included in the URB, +you can pass information to the completion handler. + +Note that even when an error (or unlink) is reported, data may have been +transferred. That's because USB transfers are packetized; it might take +sixteen packets to transfer your 1KByte buffer, and ten of them might +have transferred succesfully before the completion is called. + + +NOTE: ***** WARNING ***** +Don't use urb->dev field in your completion handler; it's cleared +as part of giving urbs back to drivers. (Addressing an issue with +ownership of periodic URBs, which was otherwise ambiguous.) Instead, +use urb->context to hold all the data your driver needs. + +NOTE: ***** WARNING ***** +Also, NEVER SLEEP IN A COMPLETION HANDLER. These are normally called +during hardware interrupt processing. If you can, defer substantial +work to a tasklet (bottom half) to keep system latencies low. You'll +probably need to use spinlocks to protect data structures you manipulate +in completion handlers. + + +1.8. How to do isochronous (ISO) transfers? + +For ISO transfers you have to fill a usb_iso_packet_descriptor structure, +allocated at the end of the URB by usb_alloc_urb(n,mem_flags), for each +packet you want to schedule. You also have to set urb->interval to say +how often to make transfers; it's often one per frame (which is once +every microframe for highspeed devices). The actual interval used will +be a power of two that's no bigger than what you specify. + +The usb_submit_urb() call modifies urb->interval to the implemented interval +value that is less than or equal to the requested interval value. If +ISO_ASAP scheduling is used, urb->start_frame is also updated. + +For each entry you have to specify the data offset for this frame (base is +transfer_buffer), and the length you want to write/expect to read. +After completion, actual_length contains the actual transferred length and +status contains the resulting status for the ISO transfer for this frame. +It is allowed to specify a varying length from frame to frame (e.g. for +audio synchronisation/adaptive transfer rates). You can also use the length +0 to omit one or more frames (striping). + +For scheduling you can choose your own start frame or ISO_ASAP. As explained +earlier, if you always keep at least one URB queued and your completion +keeps (re)submitting a later URB, you'll get smooth ISO streaming (if usb +bandwidth utilization allows). + +If you specify your own start frame, make sure it's several frames in advance +of the current frame. You might want this model if you're synchronizing +ISO data with some other event stream. + + +1.9. How to start interrupt (INT) transfers? + +Interrupt transfers, like isochronous transfers, are periodic, and happen +in intervals that are powers of two (1, 2, 4 etc) units. Units are frames +for full and low speed devices, and microframes for high speed ones. + +Currently, after you submit one interrupt URB, that urb is owned by the +host controller driver until you cancel it with usb_unlink_urb(). You +may unlink interrupt urbs in their completion handlers, if you need to. + +After a transfer completion is called, the URB is automagically resubmitted. +THIS BEHAVIOR IS EXPECTED TO BE REMOVED!! + +Interrupt transfers may only send (or receive) the "maxpacket" value for +the given interrupt endpoint; if you need more data, you will need to +copy that data out of (or into) another buffer. Similarly, you can't +queue interrupt transfers. +THESE RESTRICTIONS ARE EXPECTED TO BE REMOVED!! + +Note that this automagic resubmission model does make it awkward to use +interrupt OUT transfers. The portable solution involves unlinking those +OUT urbs after the data is transferred, and perhaps submitting a final +URB for a short packet. + +The usb_submit_urb() call modifies urb->interval to the implemented interval +value that is less than or equal to the requested interval value. |
