diff options
Diffstat (limited to 'Documentation/spi')
| -rw-r--r-- | Documentation/spi/00-INDEX | 22 | ||||
| -rw-r--r-- | Documentation/spi/spi-summary | 17 |
2 files changed, 38 insertions, 1 deletions
diff --git a/Documentation/spi/00-INDEX b/Documentation/spi/00-INDEX new file mode 100644 index 0000000..a128fa8 --- /dev/null +++ b/Documentation/spi/00-INDEX @@ -0,0 +1,22 @@ +00-INDEX + - this file. +Makefile + - Makefile for the example sourcefiles. +butterfly + - AVR Butterfly SPI driver overview and pin configuration. +ep93xx_spi + - Basic EP93xx SPI driver configuration. +pxa2xx + - PXA2xx SPI master controller build by spi_message fifo wq +spidev + - Intro to the userspace API for spi devices +spidev_fdx.c + - spidev example file +spi-lm70llp + - Connecting an LM70-LLP sensor to the kernel via the SPI subsys. +spi-sc18is602 + - NXP SC18IS602/603 I2C-bus to SPI bridge +spi-summary + - (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here. +spidev_test.c + - SPI testing utility. diff --git a/Documentation/spi/spi-summary b/Documentation/spi/spi-summary index f72e0d1..7982bcc 100644 --- a/Documentation/spi/spi-summary +++ b/Documentation/spi/spi-summary @@ -543,7 +543,22 @@ SPI MASTER METHODS queuing transfers that arrive in the meantime. When the driver is finished with this message, it must call spi_finalize_current_message() so the subsystem can issue the next - transfer. This may sleep. + message. This may sleep. + + master->transfer_one(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *transfer) + The subsystem calls the driver to transfer a single transfer while + queuing transfers that arrive in the meantime. When the driver is + finished with this transfer, it must call + spi_finalize_current_transfer() so the subsystem can issue the next + transfer. This may sleep. Note: transfer_one and transfer_one_message + are mutually exclusive; when both are set, the generic subsystem does + not call your transfer_one callback. + + Return values: + negative errno: error + 0: transfer is finished + 1: transfer is still in progress DEPRECATED METHODS |
