summaryrefslogtreecommitdiffstats
path: root/Documentation/sound
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound')
-rw-r--r--Documentation/sound/alsa/Audiophile-Usb.txt10
-rw-r--r--Documentation/sound/alsa/hda_codec.txt2
-rw-r--r--Documentation/sound/alsa/soc/dapm.txt2
3 files changed, 7 insertions, 7 deletions
diff --git a/Documentation/sound/alsa/Audiophile-Usb.txt b/Documentation/sound/alsa/Audiophile-Usb.txt
index 2ad5e63..a4c53d8 100644
--- a/Documentation/sound/alsa/Audiophile-Usb.txt
+++ b/Documentation/sound/alsa/Audiophile-Usb.txt
@@ -236,15 +236,15 @@ The parameter can be given:
alias snd-card-1 snd-usb-audio
options snd-usb-audio index=1 device_setup=0x09
-CAUTION when initializaing the device
+CAUTION when initializing the device
-------------------------------------
* Correct initialization on the device requires that device_setup is given to
the module BEFORE the device is turned on. So, if you use the "manual probing"
method described above, take care to power-on the device AFTER this initialization.
- * Failing to respect this will lead in a misconfiguration of the device. In this case
- turn off the device, unproble the snd-usb-audio module, then probe it again with
+ * Failing to respect this will lead to a misconfiguration of the device. In this case
+ turn off the device, unprobe the snd-usb-audio module, then probe it again with
correct device_setup parameter and then (and only then) turn on the device again.
* If you've correctly initialized the device in a valid mode and then want to switch
@@ -388,9 +388,9 @@ There are 2 main potential issues when using Jackd with the device:
Jack supports big endian devices only in recent versions (thanks to
Andreas Steinmetz for his first big-endian patch). I can't remember
-extacly when this support was released into jackd, let's just say that
+exactly when this support was released into jackd, let's just say that
with jackd version 0.103.0 it's almost ok (just a small bug is affecting
-16bits Big-Endian devices, but since you've read carefully the above
+16bits Big-Endian devices, but since you've read carefully the above
paragraphs, you're now using kernel >= 2.6.23 and your 16bits devices
are now Little Endians ;-) ).
diff --git a/Documentation/sound/alsa/hda_codec.txt b/Documentation/sound/alsa/hda_codec.txt
index 8e1b025..34e87ec 100644
--- a/Documentation/sound/alsa/hda_codec.txt
+++ b/Documentation/sound/alsa/hda_codec.txt
@@ -67,7 +67,7 @@ CONFIG_SND_HDA_POWER_SAVE kconfig. It's called when the codec needs
to power up or may power down. The controller should check the all
belonging codecs on the bus whether they are actually powered off
(check codec->power_on), and optionally the driver may power down the
-contoller side, too.
+controller side, too.
The bus instance is created via snd_hda_bus_new(). You need to pass
the card instance, the template, and the pointer to store the
diff --git a/Documentation/sound/alsa/soc/dapm.txt b/Documentation/sound/alsa/soc/dapm.txt
index c784a18..b2ed698 100644
--- a/Documentation/sound/alsa/soc/dapm.txt
+++ b/Documentation/sound/alsa/soc/dapm.txt
@@ -68,7 +68,7 @@ Audio DAPM widgets fall into a number of types:-
(Widgets are defined in include/sound/soc-dapm.h)
Widgets are usually added in the codec driver and the machine driver. There are
-convience macros defined in soc-dapm.h that can be used to quickly build a
+convenience macros defined in soc-dapm.h that can be used to quickly build a
list of widgets of the codecs and machines DAPM widgets.
Most widgets have a name, register, shift and invert. Some widgets have extra
OpenPOWER on IntegriCloud