diff options
Diffstat (limited to 'Documentation/sound/alsa')
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 6 | ||||
| -rw-r--r-- | Documentation/sound/alsa/HD-Audio-Controls.txt | 16 | ||||
| -rw-r--r-- | Documentation/sound/alsa/HD-Audio-Models.txt | 67 | ||||
| -rw-r--r-- | Documentation/sound/alsa/HD-Audio.txt | 55 |
4 files changed, 79 insertions, 65 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 8975701..936699e 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -886,6 +886,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. disable) power_save_controller - Reset HD-audio controller in power-saving mode (default = on) + align_buffer_size - Force rounding of buffer/period sizes to multiples + of 128 bytes. This is more efficient in terms of memory + access but isn't required by the HDA spec and prevents + users from specifying exact period/buffer sizes. + (default = on) + snoop - Enable/disable snooping (default = on) This module supports multiple cards and autoprobe. diff --git a/Documentation/sound/alsa/HD-Audio-Controls.txt b/Documentation/sound/alsa/HD-Audio-Controls.txt index 1482035..e9621e3 100644 --- a/Documentation/sound/alsa/HD-Audio-Controls.txt +++ b/Documentation/sound/alsa/HD-Audio-Controls.txt @@ -98,3 +98,19 @@ Conexant codecs * Auto-Mute Mode See Reatek codecs. + + +Analog codecs +-------------- + +* Channel Mode + This is an enum control to change the surround-channel setup, + appears only when the surround channels are available. + It gives the number of channels to be used, "2ch", "4ch" and "6ch". + According to the configuration, this also controls the + jack-retasking of multi-I/O jacks. + +* Independent HP + When this enum control is enabled, the headphone output is routed + from an individual stream (the third PCM such as hw:0,2) instead of + the primary stream. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index d70c93b..4f34432 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -29,9 +29,6 @@ ALC880 ALC260 ====== - hp HP machines - hp-3013 HP machines (3013-variant) - hp-dc7600 HP DC7600 fujitsu Fujitsu S7020 acer Acer TravelMate will Will laptops (PB V7900) @@ -46,15 +43,10 @@ ALC260 ALC262 ====== fujitsu Fujitsu Laptop - hp-bpc HP xw4400/6400/8400/9400 laptops - hp-bpc-d7000 HP BPC D7000 - hp-tc-t5735 HP Thin Client T5735 - hp-rp5700 HP RP5700 benq Benq ED8 benq-t31 Benq T31 hippo Hippo (ATI) with jack detection, Sony UX-90s hippo_1 Hippo (Benq) with jack detection - sony-assamd Sony ASSAMD toshiba-s06 Toshiba S06 toshiba-rx1 Toshiba RX1 tyan Tyan Thunder n6650W (S2915-E) @@ -66,43 +58,15 @@ ALC262 ALC267/268 ========== - quanta-il1 Quanta IL1 mini-notebook - 3stack 3-stack model - toshiba Toshiba A205 - acer Acer laptops - acer-dmic Acer laptops with digital-mic - acer-aspire Acer Aspire One - dell Dell OEM laptops (Vostro 1200) - zepto Zepto laptops - test for testing/debugging purpose, almost all controls can - adjusted. Appearing only when compiled with - $CONFIG_SND_DEBUG=y - auto auto-config reading BIOS (default) + N/A ALC269 ====== - basic Basic preset - quanta Quanta FL1 laptop-amic Laptops with analog-mic input laptop-dmic Laptops with digital-mic input - fujitsu FSC Amilo - lifebook Fujitsu Lifebook S6420 - auto auto-config reading BIOS (default) ALC662/663/272 ============== - 3stack-dig 3-stack (2-channel) with SPDIF - 3stack-6ch 3-stack (6-channel) - 3stack-6ch-dig 3-stack (6-channel) with SPDIF - 5stack-dig 5-stack with SPDIF - lenovo-101e Lenovo laptop - eeepc-p701 ASUS Eeepc P701 - eeepc-ep20 ASUS Eeepc EP20 - ecs ECS/Foxconn mobo - m51va ASUS M51VA - g71v ASUS G71V - h13 ASUS H13 - g50v ASUS G50V asus-mode1 ASUS asus-mode2 ASUS asus-mode3 ASUS @@ -111,15 +75,10 @@ ALC662/663/272 asus-mode6 ASUS asus-mode7 ASUS asus-mode8 ASUS - dell Dell with ALC272 - dell-zm1 Dell ZM1 with ALC272 - samsung-nc10 Samsung NC10 mini notebook - auto auto-config reading BIOS (default) ALC680 ====== - base Base model (ASUS NX90) - auto auto-config reading BIOS (default) + N/A ALC882/883/885/888/889 ====================== @@ -175,28 +134,11 @@ ALC882/883/885/888/889 ALC861/660 ========== - 3stack 3-jack - 3stack-dig 3-jack with SPDIF I/O - 6stack-dig 6-jack with SPDIF I/O - 3stack-660 3-jack (for ALC660) - uniwill-m31 Uniwill M31 laptop - toshiba Toshiba laptop support - asus Asus laptop support - asus-laptop ASUS F2/F3 laptops - auto auto-config reading BIOS (default) + N/A ALC861VD/660VD ============== - 3stack 3-jack - 3stack-dig 3-jack with SPDIF OUT - 6stack-dig 6-jack with SPDIF OUT - 3stack-660 3-jack (for ALC660VD) - 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD) - lenovo Lenovo 3000 C200 - dallas Dallas laptops - hp HP TX1000 - asus-v1s ASUS V1Sn - auto auto-config reading BIOS (default) + N/A CMI9880 ======= @@ -289,7 +231,6 @@ Conexant 5051 hp-dv6736 HP dv6736 hp-f700 HP Compaq Presario F700 ideapad Lenovo IdeaPad laptop - lenovo-x200 Lenovo X200 laptop toshiba Toshiba Satellite M300 Conexant 5066 diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index c82beb0..03e2771 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -447,7 +447,10 @@ The file needs to have a line `[codec]`. The next line should contain three numbers indicating the codec vendor-id (0x12345678 in the example), the codec subsystem-id (0xabcd1234) and the address (2) of the codec. The rest patch entries are applied to this specified codec -until another codec entry is given. +until another codec entry is given. Passing 0 or a negative number to +the first or the second value will make the check of the corresponding +field be skipped. It'll be useful for really broken devices that don't +initialize SSID properly. The `[model]` line allows to change the model name of the each codec. In the example above, it will be changed to model=auto. @@ -491,7 +494,7 @@ Also, the codec chip name can be rewritten via `[chip_name]` line. The hd-audio driver reads the file via request_firmware(). Thus, a patch file has to be located on the appropriate firmware path, typically, /lib/firmware. For example, when you pass the option -`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be +`patch=hda-init.fw`, the file /lib/firmware/hda-init.fw must be present. The patch module option is specific to each card instance, and you @@ -524,6 +527,54 @@ power-saving. See /sys/module/snd_hda_intel/parameters/power_save to check the current value. If it's non-zero, the feature is turned on. +Tracepoints +~~~~~~~~~~~ +The hd-audio driver gives a few basic tracepoints. +`hda:hda_send_cmd` traces each CORB write while `hda:hda_get_response` +traces the response from RIRB (only when read from the codec driver). +`hda:hda_bus_reset` traces the bus-reset due to fatal error, etc, +`hda:hda_unsol_event` traces the unsolicited events, and +`hda:hda_power_down` and `hda:hda_power_up` trace the power down/up +via power-saving behavior. + +Enabling all tracepoints can be done like +------------------------------------------------------------------------ + # echo 1 > /sys/kernel/debug/tracing/events/hda/enable +------------------------------------------------------------------------ +then after some commands, you can traces from +/sys/kernel/debug/tracing/trace file. For example, when you want to +trace what codec command is sent, enable the tracepoint like: +------------------------------------------------------------------------ + # cat /sys/kernel/debug/tracing/trace + # tracer: nop + # + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + <...>-7807 [002] 105147.774889: hda_send_cmd: [0:0] val=e3a019 + <...>-7807 [002] 105147.774893: hda_send_cmd: [0:0] val=e39019 + <...>-7807 [002] 105147.999542: hda_send_cmd: [0:0] val=e3a01a + <...>-7807 [002] 105147.999543: hda_send_cmd: [0:0] val=e3901a + <...>-26764 [001] 349222.837143: hda_send_cmd: [0:0] val=e3a019 + <...>-26764 [001] 349222.837148: hda_send_cmd: [0:0] val=e39019 + <...>-26764 [001] 349223.058539: hda_send_cmd: [0:0] val=e3a01a + <...>-26764 [001] 349223.058541: hda_send_cmd: [0:0] val=e3901a +------------------------------------------------------------------------ +Here `[0:0]` indicates the card number and the codec address, and +`val` shows the value sent to the codec, respectively. The value is +a packed value, and you can decode it via hda-decode-verb program +included in hda-emu package below. For example, the value e3a019 is +to set the left output-amp value to 25. +------------------------------------------------------------------------ + % hda-decode-verb 0xe3a019 + raw value = 0x00e3a019 + cid = 0, nid = 0x0e, verb = 0x3a0, parm = 0x19 + raw value: verb = 0x3a0, parm = 0x19 + verbname = set_amp_gain_mute + amp raw val = 0xa019 + output, left, idx=0, mute=0, val=25 +------------------------------------------------------------------------ + + Development Tree ~~~~~~~~~~~~~~~~ The latest development codes for HD-audio are found on sound git tree: |
