summaryrefslogtreecommitdiffstats
path: root/Documentation/sound/alsa/ALSA-Configuration.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/sound/alsa/ALSA-Configuration.txt')
-rw-r--r--Documentation/sound/alsa/ALSA-Configuration.txt83
1 files changed, 63 insertions, 20 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 23f4db0..969ff83 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -328,6 +328,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for sound cards based on C-Media CMI8330 ISA chips.
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
wssport - port # for CMI8330 chip (WSS)
wssirq - IRQ # for CMI8330 chip (WSS)
wssdma - first DMA # for CMI8330 chip (WSS)
@@ -382,6 +386,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for sound cards based on CS4232/CS4232A ISA chips.
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
port - port # for CS4232 chip (PnP setup - 0x534)
cport - control port # for CS4232 chip (PnP setup - 0x120,0x210,0xf00)
mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
@@ -390,10 +398,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
dma1 - first DMA # for CS4232 chip (0,1,3)
dma2 - second DMA # for Yamaha CS4232 chip (0,1,3), -1 = disable
- isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
This module supports multiple cards. This module does not support autoprobe
- thus main port must be specified!!! Other ports are optional.
+ (if ISA PnP is not used) thus main port must be specified!!! Other ports are
+ optional.
The power-management is supported.
@@ -403,6 +411,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for sound cards based on CS4235/CS4236/CS4236B/CS4237B/
CS4238B/CS4239 ISA chips.
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
port - port # for CS4236 chip (PnP setup - 0x534)
cport - control port # for CS4236 chip (PnP setup - 0x120,0x210,0xf00)
mpu_port - port # for MPU-401 UART (PnP setup - 0x300), -1 = disable
@@ -411,7 +423,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
mpu_irq - IRQ # for MPU-401 UART (9,11,12,15)
dma1 - first DMA # for CS4236 chip (0,1,3)
dma2 - second DMA # for CS4236 chip (0,1,3), -1 = disable
- isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
This module supports multiple cards. This module does not support autoprobe
(if ISA PnP is not used) thus main port and control port must be
@@ -600,13 +611,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for ESS AudioDrive ES-18xx sound cards.
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
port - port # for ES-18xx chip (0x220,0x240,0x260)
mpu_port - port # for MPU-401 port (0x300,0x310,0x320,0x330), -1 = disable (default)
fm_port - port # for FM (optional, not used)
irq - IRQ # for ES-18xx chip (5,7,9,10)
dma1 - first DMA # for ES-18xx chip (0,1,3)
dma2 - first DMA # for ES-18xx chip (0,1,3)
- isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
This module supports multiple cards, ISA PnP and autoprobe (without MPU-401
port if native ISA PnP routines are not used).
@@ -1230,15 +1244,19 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for Gravis UltraSound PnP, Dynasonic 3-D/Pro, STB Sound Rage 32
and other sound cards based on AMD InterWave (tm) chip.
- port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
- irq - IRQ # for InterWave chip (3,5,9,11,12,15)
- dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
- dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
pcm_voices - reserved PCM voices for the synthesizer (default 2)
effect - 1 = InterWave effects enable (default 0);
requires 8 voices
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
+ port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
+ irq - IRQ # for InterWave chip (3,5,9,11,12,15)
+ dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
+ dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
This module supports multiple cards, autoprobe and ISA PnP.
@@ -1249,16 +1267,20 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
and other sound cards based on AMD InterWave (tm) chip with TEA6330T
circuit for extended control of bass, treble and master volume.
- port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
- port_tc - tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
- irq - IRQ # for InterWave chip (3,5,9,11,12,15)
- dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
- dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
joystick_dac - 0 to 31, (0.59V-4.52V or 0.389V-2.98V)
midi - 1 = MIDI UART enable, 0 = MIDI UART disable (default)
pcm_voices - reserved PCM voices for the synthesizer (default 2)
effect - 1 = InterWave effects enable (default 0);
requires 8 voices
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
+ port - port # for InterWave chip (0x210,0x220,0x230,0x240,0x250,0x260)
+ port_tc - tone control (i2c bus) port # for TEA6330T chip (0x350,0x360,0x370,0x380)
+ irq - IRQ # for InterWave chip (3,5,9,11,12,15)
+ dma1 - DMA # for InterWave chip (0,1,3,5,6,7)
+ dma2 - DMA # for InterWave chip (0,1,3,5,6,7,-1=disable)
This module supports multiple cards, autoprobe and ISA PnP.
@@ -1446,6 +1468,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for Yamaha OPL3-SA2/SA3 sound cards.
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
port - control port # for OPL3-SA chip (0x370)
sb_port - SB port # for OPL3-SA chip (0x220,0x240)
wss_port - WSS port # for OPL3-SA chip (0x530,0xe80,0xf40,0x604)
@@ -1454,7 +1480,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
irq - IRQ # for OPL3-SA chip (5,7,9,10)
dma1 - first DMA # for Yamaha OPL3-SA chip (0,1,3)
dma2 - second DMA # for Yamaha OPL3-SA chip (0,1,3), -1 = disable
- isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
This module supports multiple cards and ISA PnP. It does not support
autoprobe (if ISA PnP is not used) thus all ports must be specified!!!
@@ -1467,6 +1492,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for sound cards based on OPTi 82c92x and Analog Devices AD1848 chips.
Module works with OAK Mozart cards as well.
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
fm_port - port # for OPL3 device (0x388)
@@ -1481,6 +1510,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for sound cards based on OPTi 82c92x and Crystal CS4231 chips.
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
fm_port - port # for OPL3 device (0x388)
@@ -1496,6 +1529,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for sound cards based on OPTi 82c93x chips.
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
port - port # for WSS chip (0x530,0xe80,0xf40,0x604)
mpu_port - port # for MPU-401 UART (0x300,0x310,0x320,0x330)
fm_port - port # for OPL3 device (0x388)
@@ -1620,6 +1657,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
SoundBlaster AWE 32 (PnP),
SoundBlaster AWE 64 PnP
+ mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
+ csp - ASP/CSP chip support - 0 = disable (default), 1 = enable
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
port - port # for SB DSP 4.x chip (0x220,0x240,0x260)
mpu_port - port # for MPU-401 UART (0x300,0x330), -1 = disable
awe_port - base port # for EMU8000 synthesizer (0x620,0x640,0x660)
@@ -1627,9 +1670,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
irq - IRQ # for SB DSP 4.x chip (5,7,9,10)
dma8 - 8-bit DMA # for SB DSP 4.x chip (0,1,3)
dma16 - 16-bit DMA # for SB DSP 4.x chip (5,6,7)
- mic_agc - Mic Auto-Gain-Control - 0 = disable, 1 = enable (default)
- csp - ASP/CSP chip support - 0 = disable (default), 1 = enable
- isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
This module supports multiple cards, autoprobe and ISA PnP.
@@ -1712,18 +1752,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module for Turtle Beach Maui, Tropez and Tropez+ sound cards.
+ use_cs4232_midi - Use CS4232 MPU-401 interface
+ (inaccessibly located inside your computer)
+ isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
+
+ with isapnp=0, the following options are available:
+
cs4232_pcm_port - Port # for CS4232 PCM interface.
cs4232_pcm_irq - IRQ # for CS4232 PCM interface (5,7,9,11,12,15).
cs4232_mpu_port - Port # for CS4232 MPU-401 interface.
cs4232_mpu_irq - IRQ # for CS4232 MPU-401 interface (9,11,12,15).
- use_cs4232_midi - Use CS4232 MPU-401 interface
- (inaccessibly located inside your computer)
ics2115_port - Port # for ICS2115
ics2115_irq - IRQ # for ICS2115
fm_port - FM OPL-3 Port #
dma1 - DMA1 # for CS4232 PCM interface.
dma2 - DMA2 # for CS4232 PCM interface.
- isapnp - ISA PnP detection - 0 = disable, 1 = enable (default)
The below are options for wavefront_synth features:
wf_raw - Assume that we need to boot the OS (default:no)
OpenPOWER on IntegriCloud