diff options
Diffstat (limited to 'Documentation/sound/alsa/ALSA-Configuration.txt')
| -rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 44 |
1 files changed, 20 insertions, 24 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 104a994..a18ecb9 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -636,11 +636,16 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. 3stack-digout 3-jack in back, a HP out and a SPDIF out 5stack 5-jack in back, 2-jack in front 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out + 6stack 6-jack in back, 2-jack in front + 6stack-digout 6-jack with a SPDIF out w810 3-jack z71v 3-jack (HP shared SPDIF) asus 3-jack uniwill 3-jack F1734 2-jack + test for testing/debugging purpose, almost all controls can be + adjusted. Appearing only when compiled with + $CONFIG_SND_DEBUG=y CMI9880 minimal 3-jack in back @@ -1054,6 +1059,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. The power-management is supported. + Module snd-pxa2xx-ac97 (on arm only) + ------------------------------------ + + Module for AC97 driver for the Intel PXA2xx chip + + For ARM architecture only. + Module snd-rme32 ---------------- @@ -1173,6 +1185,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module supports up to 8 cards. + Module snd-sun-dbri (on sparc only) + ----------------------------------- + + Module for DBRI sound chips found on Sparcs. + + Module supports up to 8 cards. + Module snd-wavefront -------------------- @@ -1371,7 +1390,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-vxpocket ------------------- - Module for Digigram VX-Pocket VX2 PCMCIA card. + Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards. ibl - Capture IBL size. (default = 0, minimum size) @@ -1391,29 +1410,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Note: the driver is build only when CONFIG_ISA is set. - Module snd-vxp440 - ----------------- - - Module for Digigram VX-Pocket 440 PCMCIA card. - - ibl - Capture IBL size. (default = 0, minimum size) - - Module supports up to 8 cards. The module is compiled only when - PCMCIA is supported on kernel. - - To activate the driver via the card manager, you'll need to set - up /etc/pcmcia/vxp440.conf. See the sound/pcmcia/vx/vxp440.c. - - When the driver is compiled as a module and the hotplug firmware - is supported, the firmware data is loaded via hotplug automatically. - Install the necessary firmware files in alsa-firmware package. - When no hotplug fw loader is available, you need to load the - firmware via vxloader utility in alsa-tools package. - - About capture IBL, see the description of snd-vx222 module. - - Note: the driver is build only when CONFIG_ISA is set. - Module snd-ymfpci ----------------- |
