summaryrefslogtreecommitdiffstats
path: root/Documentation/scsi/scsi-changer.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/scsi/scsi-changer.txt')
-rw-r--r--Documentation/scsi/scsi-changer.txt4
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
index d74bbd2..032399b 100644
--- a/Documentation/scsi/scsi-changer.txt
+++ b/Documentation/scsi/scsi-changer.txt
@@ -88,7 +88,7 @@ If the module finds the changer, it prints some messages about the
device [ try "dmesg" if you don't see anything ] and should show up in
/proc/devices. If not.... some changers use ID ? / LUN 0 for the
device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*
-look for LUN's other than 0 as default, becauce there are to many
+look for LUNs other than 0 as default, because there are too many
broken devices. So you can try:
1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi
@@ -107,7 +107,7 @@ because the kernel will translate the error codes into human-readable
strings then.
You can display these messages with the dmesg command (or check the
-logfiles). If you email me some question becauce of a problem with the
+logfiles). If you email me some question because of a problem with the
driver, please include these messages.
OpenPOWER on IntegriCloud