diff options
Diffstat (limited to 'Documentation/scsi/hptiop.txt')
| -rw-r--r-- | Documentation/scsi/hptiop.txt | 69 |
1 files changed, 65 insertions, 4 deletions
diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt index 9605179..4a4f47e 100644 --- a/Documentation/scsi/hptiop.txt +++ b/Documentation/scsi/hptiop.txt @@ -37,7 +37,7 @@ For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0: 0x40 Inbound Queue Port 0x44 Outbound Queue Port -For Marvell IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: +For Marvell not Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: BAR0 offset Register 0x20400 Inbound Doorbell Register @@ -55,9 +55,31 @@ For Marvell IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: 0x40-0x1040 Inbound Queue 0x1040-0x2040 Outbound Queue +For Marvell Frey IOP based adapters, the IOP is accessed via PCI BAR0 and BAR1: -I/O Request Workflow ----------------------- + BAR0 offset Register + 0x0 IOP configuration information. + + BAR1 offset Register + 0x4000 Inbound List Base Address Low + 0x4004 Inbound List Base Address High + 0x4018 Inbound List Write Pointer + 0x402C Inbound List Configuration and Control + 0x4050 Outbound List Base Address Low + 0x4054 Outbound List Base Address High + 0x4058 Outbound List Copy Pointer Shadow Base Address Low + 0x405C Outbound List Copy Pointer Shadow Base Address High + 0x4088 Outbound List Interrupt Cause + 0x408C Outbound List Interrupt Enable + 0x1020C PCIe Function 0 Interrupt Enable + 0x10400 PCIe Function 0 to CPU Message A + 0x10420 CPU to PCIe Function 0 Message A + 0x10480 CPU to PCIe Function 0 Doorbell + 0x10484 CPU to PCIe Function 0 Doorbell Enable + + +I/O Request Workflow of Not Marvell Frey +------------------------------------------ All queued requests are handled via inbound/outbound queue port. A request packet can be allocated in either IOP or host memory. @@ -101,6 +123,45 @@ register 0. An outbound message with the same value indicates the completion of an inbound message. +I/O Request Workflow of Marvell Frey +-------------------------------------- + +All queued requests are handled via inbound/outbound list. + +To send a request to the controller: + + - Allocate a free request in host DMA coherent memory. + + Requests allocated in host memory must be aligned on 32-bytes boundary. + + - Fill the request with index of the request in the flag. + + Fill a free inbound list unit with the physical address and the size of + the request. + + Set up the inbound list write pointer with the index of previous unit, + round to 0 if the index reaches the supported count of requests. + + - Post the inbound list writer pointer to IOP. + + - The IOP process the request. When the request is completed, the flag of + the request with or-ed IOPMU_QUEUE_MASK_HOST_BITS will be put into a + free outbound list unit and the index of the outbound list unit will be + put into the copy pointer shadow register. An outbound interrupt will be + generated. + + - The host read the outbound list copy pointer shadow register and compare + with previous saved read ponter N. If they are different, the host will + read the (N+1)th outbound list unit. + + The host get the index of the request from the (N+1)th outbound list + unit and complete the request. + +Non-queued requests (reset communication/reset/flush etc) can be sent via PCIe +Function 0 to CPU Message A register. The CPU to PCIe Function 0 Message register +with the same value indicates the completion of message. + + User-level Interface --------------------- @@ -112,7 +173,7 @@ The driver exposes following sysfs attributes: ----------------------------------------------------------------------------- -Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved. +Copyright (C) 2006-2012 HighPoint Technologies, Inc. All Rights Reserved. This file is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of |
