diff options
Diffstat (limited to 'Documentation/scsi/hptiop.txt')
| -rw-r--r-- | Documentation/scsi/hptiop.txt | 92 |
1 files changed, 92 insertions, 0 deletions
diff --git a/Documentation/scsi/hptiop.txt b/Documentation/scsi/hptiop.txt new file mode 100644 index 0000000..d28a312 --- /dev/null +++ b/Documentation/scsi/hptiop.txt @@ -0,0 +1,92 @@ +HIGHPOINT ROCKETRAID 3xxx RAID DRIVER (hptiop) + +Controller Register Map +------------------------- + +The controller IOP is accessed via PCI BAR0. + + BAR0 offset Register + 0x10 Inbound Message Register 0 + 0x14 Inbound Message Register 1 + 0x18 Outbound Message Register 0 + 0x1C Outbound Message Register 1 + 0x20 Inbound Doorbell Register + 0x24 Inbound Interrupt Status Register + 0x28 Inbound Interrupt Mask Register + 0x30 Outbound Interrupt Status Register + 0x34 Outbound Interrupt Mask Register + 0x40 Inbound Queue Port + 0x44 Outbound Queue Port + + +I/O Request Workflow +---------------------- + +All queued requests are handled via inbound/outbound queue port. +A request packet can be allocated in either IOP or host memory. + +To send a request to the controller: + + - Get a free request packet by reading the inbound queue port or + allocate a free request in host DMA coherent memory. + + The value returned from the inbound queue port is an offset + relative to the IOP BAR0. + + Requests allocated in host memory must be aligned on 32-bytes boundary. + + - Fill the packet. + + - Post the packet to IOP by writing it to inbound queue. For requests + allocated in IOP memory, write the offset to inbound queue port. For + requests allocated in host memory, write (0x80000000|(bus_addr>>5)) + to the inbound queue port. + + - The IOP process the request. When the request is completed, it + will be put into outbound queue. An outbound interrupt will be + generated. + + For requests allocated in IOP memory, the request offset is posted to + outbound queue. + + For requests allocated in host memory, (0x80000000|(bus_addr>>5)) + is posted to the outbound queue. If IOP_REQUEST_FLAG_OUTPUT_CONTEXT + flag is set in the request, the low 32-bit context value will be + posted instead. + + - The host read the outbound queue and complete the request. + + For requests allocated in IOP memory, the host driver free the request + by writing it to the outbound queue. + +Non-queued requests (reset/flush etc) can be sent via inbound message +register 0. An outbound message with the same value indicates the completion +of an inbound message. + + +User-level Interface +--------------------- + +The driver exposes following sysfs attributes: + + NAME R/W Description + driver-version R driver version string + firmware-version R firmware version string + +The driver registers char device "hptiop" to communicate with HighPoint RAID +management software. Its ioctl routine acts as a general binary interface +between the IOP firmware and HighPoint RAID management software. New management +functions can be implemented in application/firmware without modification +in driver code. + + +----------------------------------------------------------------------------- +Copyright (C) 2006 HighPoint Technologies, Inc. All Rights Reserved. + + This file is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + linux@highpoint-tech.com + http://www.highpoint-tech.com |
