diff options
Diffstat (limited to 'Documentation/s390/Debugging390.txt')
| -rw-r--r-- | Documentation/s390/Debugging390.txt | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index e506e8d..2d826d8 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -366,8 +366,8 @@ Register Usage & Stackframes on Linux for s/390 & z/Architecture Overview: --------- This is the code that gcc produces at the top & the bottom of -each function, it usually is fairly consistent & similar from -function to function & if you know its layout you can probalby +each function. It usually is fairly consistent & similar from +function to function & if you know its layout you can probably make some headway in finding the ultimate cause of a problem after a crash without a source level debugger. @@ -1703,7 +1703,7 @@ concentrate on data processing. IOP's can use one or more links ( known as channel paths ) to talk to each IO device. It first checks for path availability & chooses an available one, then starts ( & sometimes terminates IO ). -There are two types of channel path ESCON & the Paralell IO interface. +There are two types of channel path: ESCON & the Parallel IO interface. IO devices are attached to control units, control units provide the logic to interface the channel paths & channel path IO protocols to @@ -1742,11 +1742,11 @@ controllers or a control unit which connects to 1000 3270 terminals ). The 390 IO systems come in 2 flavours the current 390 machines support both -The Older 360 & 370 Interface,sometimes called the paralell I/O interface, +The Older 360 & 370 Interface,sometimes called the Parallel I/O interface, sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers Interface (OEMI). -This byte wide paralell channel path/bus has parity & data on the "Bus" cable +This byte wide Parallel channel path/bus has parity & data on the "Bus" cable & control lines on the "Tag" cable. These can operate in byte multiplex mode for sharing between several slow devices or burst mode & monopolize the channel for the whole burst. Upto 256 devices can be addressed on one of these cables. These cables are @@ -1776,7 +1776,7 @@ Consoles 3270 & 3215 ( a teletype emulated under linux for a line mode console ) DASD's direct access storage devices ( otherwise known as hard disks ). Tape Drives. CTC ( Channel to Channel Adapters ), -ESCON or Paralell Cables used as a very high speed serial link +ESCON or Parallel Cables used as a very high speed serial link between 2 machines. We use 2 cables under linux to do a bi-directional serial link. @@ -1802,8 +1802,8 @@ OSA 7C09 ON OSA 7C09 SUBCHANNEL = 0001 OSA 7C14 ON OSA 7C14 SUBCHANNEL = 0002 OSA 7C15 ON OSA 7C15 SUBCHANNEL = 0003 -If you have a guest with certain priviliges you may be able to see devices -which don't belong to you to avoid this do add the option V. +If you have a guest with certain privileges you may be able to see devices +which don't belong to you. To avoid this, add the option V. e.g. Q V OSA |
