diff options
Diffstat (limited to 'Documentation/power/regulator/overview.txt')
| -rw-r--r-- | Documentation/power/regulator/overview.txt | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/power/regulator/overview.txt b/Documentation/power/regulator/overview.txt index 8ed1758..40ca2d6 100644 --- a/Documentation/power/regulator/overview.txt +++ b/Documentation/power/regulator/overview.txt @@ -36,11 +36,11 @@ Some terms used in this document:- Consumers can be classified into two types:- Static: consumer does not change its supply voltage or - current limit. It only needs to enable or disable it's + current limit. It only needs to enable or disable its power supply. Its supply voltage is set by the hardware, bootloader, firmware or kernel board initialisation code. - Dynamic: consumer needs to change it's supply voltage or + Dynamic: consumer needs to change its supply voltage or current limit to meet operation demands. @@ -156,7 +156,7 @@ relevant to non SoC devices and is split into the following four interfaces:- This interface is for machine specific code and allows the creation of voltage/current domains (with constraints) for each regulator. It can provide regulator constraints that will prevent device damage through - overvoltage or over current caused by buggy client drivers. It also + overvoltage or overcurrent caused by buggy client drivers. It also allows the creation of a regulator tree whereby some regulators are supplied by others (similar to a clock tree). |
