diff options
Diffstat (limited to 'Documentation/power/drivers-testing.txt')
-rw-r--r-- | Documentation/power/drivers-testing.txt | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/Documentation/power/drivers-testing.txt b/Documentation/power/drivers-testing.txt new file mode 100644 index 0000000..33016c2 --- /dev/null +++ b/Documentation/power/drivers-testing.txt @@ -0,0 +1,42 @@ +Testing suspend and resume support in device drivers + (C) 2007 Rafael J. Wysocki <rjw@sisk.pl>, GPL + +1. Preparing the test system + +Unfortunately, to effectively test the support for the system-wide suspend and +resume transitions in a driver, it is necessary to suspend and resume a fully +functional system with this driver loaded. Moreover, that should be done +several times, preferably several times in a row, and separately for the suspend +to disk (STD) and the suspend to RAM (STR) transitions, because each of these +cases involves different ordering of operations and different interactions with +the machine's BIOS. + +Of course, for this purpose the test system has to be known to suspend and +resume without the driver being tested. Thus, if possible, you should first +resolve all suspend/resume-related problems in the test system before you start +testing the new driver. Please see Documents/power/basic-pm-debugging.txt for +more information about the debugging of suspend/resume functionality. + +2. Testing the driver + +Once you have resolved the suspend/resume-related problems with your test system +without the new driver, you are ready to test it: + +a) Build the driver as a module, load it and try the STD in the test mode (see: +Documents/power/basic-pm-debugging.txt, 1a)). + +b) Load the driver and attempt to suspend to disk in the "reboot", "shutdown" +and "platform" modes (see: Documents/power/basic-pm-debugging.txt, 1). + +c) Compile the driver directly into the kernel and try the STD in the test mode. + +d) Attempt to suspend to disk with the driver compiled directly into the kernel +in the "reboot", "shutdown" and "platform" modes. + +e) Attempt to suspend to RAM using the s2ram tool with the driver loaded (see: +Documents/power/basic-pm-debugging.txt, 2). As far as the STR tests are +concerned, it should not matter whether or not the driver is built as a module. + +Each of the above tests should be repeated several times and the STD tests +should be mixed with the STR tests. If any of them fails, the driver cannot be +regarded as suspend/resume-safe. |