summaryrefslogtreecommitdiffstats
path: root/Documentation/parport.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/parport.txt')
-rw-r--r--Documentation/parport.txt13
1 files changed, 6 insertions, 7 deletions
diff --git a/Documentation/parport.txt b/Documentation/parport.txt
index 93a7cee..c208e43 100644
--- a/Documentation/parport.txt
+++ b/Documentation/parport.txt
@@ -36,18 +36,17 @@ addresses should not be specified for supported PCI cards since they
are automatically detected.
-KMod
-----
+modprobe
+--------
-If you use kmod, you will find it useful to edit /etc/modprobe.conf.
-Here is an example of the lines that need to be added:
+If you use modprobe , you will find it useful to add lines as below to a
+configuration file in /etc/modprobe.d/ directory:.
alias parport_lowlevel parport_pc
options parport_pc io=0x378,0x278 irq=7,auto
-KMod will then automatically load parport_pc (with the options
-"io=0x378,0x278 irq=7,auto") whenever a parallel port device driver
-(such as lp) is loaded.
+modprobe will load parport_pc (with the options "io=0x378,0x278 irq=7,auto")
+whenever a parallel port device driver (such as lp) is loaded.
Note that these are example lines only! You shouldn't in general need
to specify any options to parport_pc in order to be able to use a
OpenPOWER on IntegriCloud