diff options
Diffstat (limited to 'Documentation/networking')
| -rw-r--r-- | Documentation/networking/LICENSE.qlcnic | 51 | ||||
| -rw-r--r-- | Documentation/networking/batman-adv.txt | 8 | ||||
| -rw-r--r-- | Documentation/networking/ip-sysctl.txt | 17 | ||||
| -rw-r--r-- | Documentation/networking/ipvs-sysctl.txt | 62 | ||||
| -rw-r--r-- | Documentation/networking/mac80211-injection.txt | 4 | ||||
| -rw-r--r-- | Documentation/networking/netdevices.txt | 4 | ||||
| -rw-r--r-- | Documentation/networking/stmmac.txt | 44 |
7 files changed, 121 insertions, 69 deletions
diff --git a/Documentation/networking/LICENSE.qlcnic b/Documentation/networking/LICENSE.qlcnic index 29ad4b1..e7fb2c6 100644 --- a/Documentation/networking/LICENSE.qlcnic +++ b/Documentation/networking/LICENSE.qlcnic @@ -1,61 +1,22 @@ -Copyright (c) 2009-2010 QLogic Corporation +Copyright (c) 2009-2011 QLogic Corporation QLogic Linux qlcnic NIC Driver -This program includes a device driver for Linux 2.6 that may be -distributed with QLogic hardware specific firmware binary file. You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). -You may redistribute the hardware specific firmware binary file -under the following terms: - - 1. Redistribution of source code (only if applicable), - must retain the above copyright notice, this list of - conditions and the following disclaimer. - - 2. Redistribution in binary form must reproduce the above - copyright notice, this list of conditions and the - following disclaimer in the documentation and/or other - materials provided with the distribution. - - 3. The name of QLogic Corporation may not be used to - endorse or promote products derived from this software - without specific prior written permission - -REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE, -THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY -EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A -PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR -BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, -EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED -TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, -DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY -OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -POSSIBILITY OF SUCH DAMAGE. - -USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT -CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR -OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT, -TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN -ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN -COMBINATION WITH THIS PROGRAM. - EXHIBIT A - GNU GENERAL PUBLIC LICENSE - Version 2, June 1991 + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. - Preamble + Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public @@ -105,7 +66,7 @@ patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. - GNU GENERAL PUBLIC LICENSE + GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains @@ -304,7 +265,7 @@ make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. - NO WARRANTY + NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 88d4afb..c86d03f 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -1,4 +1,4 @@ -[state: 17-04-2011] +[state: 21-08-2011] BATMAN-ADV ---------- @@ -68,9 +68,9 @@ All mesh wide settings can be found in batman's own interface folder: # ls /sys/class/net/bat0/mesh/ -# aggregated_ogms gw_bandwidth hop_penalty -# bonding gw_mode orig_interval -# fragmentation gw_sel_class vis_mode +# aggregated_ogms fragmentation gw_sel_class vis_mode +# ap_isolation gw_bandwidth hop_penalty +# bonding gw_mode orig_interval There is a special folder for debugging information: diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ca5cdcd..cb7f314 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -1045,6 +1045,11 @@ conf/interface/*: accept_ra - INTEGER Accept Router Advertisements; autoconfigure using them. + It also determines whether or not to transmit Router + Solicitations. If and only if the functional setting is to + accept Router Advertisements, Router Solicitations will be + transmitted. + Possible values are: 0 Do not accept Router Advertisements. 1 Accept Router Advertisements if forwarding is disabled. @@ -1115,14 +1120,14 @@ forwarding - INTEGER Possible values are: 0 Forwarding disabled 1 Forwarding enabled - 2 Forwarding enabled (Hybrid Mode) FALSE (0): By default, Host behaviour is assumed. This means: 1. IsRouter flag is not set in Neighbour Advertisements. - 2. Router Solicitations are being sent when necessary. + 2. If accept_ra is TRUE (default), transmit Router + Solicitations. 3. If accept_ra is TRUE (default), accept Router Advertisements (and do autoconfiguration). 4. If accept_redirects is TRUE (default), accept Redirects. @@ -1133,16 +1138,10 @@ forwarding - INTEGER This means exactly the reverse from the above: 1. IsRouter flag is set in Neighbour Advertisements. - 2. Router Solicitations are not sent. + 2. Router Solicitations are not sent unless accept_ra is 2. 3. Router Advertisements are ignored unless accept_ra is 2. 4. Redirects are ignored. - TRUE (2): - - Hybrid mode. Same behaviour as TRUE, except for: - - 2. Router Solicitations are being sent when necessary. - Default: 0 (disabled) if global forwarding is disabled (default), otherwise 1 (enabled). diff --git a/Documentation/networking/ipvs-sysctl.txt b/Documentation/networking/ipvs-sysctl.txt index 4ccdbca..f2a2488 100644 --- a/Documentation/networking/ipvs-sysctl.txt +++ b/Documentation/networking/ipvs-sysctl.txt @@ -15,6 +15,23 @@ amemthresh - INTEGER enabled and the variable is automatically set to 2, otherwise the strategy is disabled and the variable is set to 1. +conntrack - BOOLEAN + 0 - disabled (default) + not 0 - enabled + + If set, maintain connection tracking entries for + connections handled by IPVS. + + This should be enabled if connections handled by IPVS are to be + also handled by stateful firewall rules. That is, iptables rules + that make use of connection tracking. It is a performance + optimisation to disable this setting otherwise. + + Connections handled by the IPVS FTP application module + will have connection tracking entries regardless of this setting. + + Only available when IPVS is compiled with CONFIG_IP_VS_NFCT enabled. + cache_bypass - BOOLEAN 0 - disabled (default) not 0 - enabled @@ -39,7 +56,7 @@ debug_level - INTEGER 11 - IPVS packet handling (ip_vs_in/ip_vs_out) 12 or more - packet traversal - Only available when IPVS is compiled with the CONFIG_IPVS_DEBUG + Only available when IPVS is compiled with CONFIG_IP_VS_DEBUG enabled. Higher debugging levels include the messages for lower debugging levels, so setting debug level 2, includes level 0, 1 and 2 @@ -123,13 +140,11 @@ nat_icmp_send - BOOLEAN secure_tcp - INTEGER 0 - disabled (default) - The secure_tcp defense is to use a more complicated state - transition table and some possible short timeouts of each - state. In the VS/NAT, it delays the entering the ESTABLISHED - until the real server starts to send data and ACK packet - (after 3-way handshake). + The secure_tcp defense is to use a more complicated TCP state + transition table. For VS/NAT, it also delays entering the + TCP ESTABLISHED state until the three way handshake is completed. - The value definition is the same as that of drop_entry or + The value definition is the same as that of drop_entry and drop_packet. sync_threshold - INTEGER @@ -141,3 +156,36 @@ sync_threshold - INTEGER synchronized, every time the number of its incoming packets modulus 50 equals the threshold. The range of the threshold is from 0 to 49. + +snat_reroute - BOOLEAN + 0 - disabled + not 0 - enabled (default) + + If enabled, recalculate the route of SNATed packets from + realservers so that they are routed as if they originate from the + director. Otherwise they are routed as if they are forwarded by the + director. + + If policy routing is in effect then it is possible that the route + of a packet originating from a director is routed differently to a + packet being forwarded by the director. + + If policy routing is not in effect then the recalculated route will + always be the same as the original route so it is an optimisation + to disable snat_reroute and avoid the recalculation. + +sync_version - INTEGER + default 1 + + The version of the synchronisation protocol used when sending + synchronisation messages. + + 0 selects the original synchronisation protocol (version 0). This + should be used when sending synchronisation messages to a legacy + system that only understands the original synchronisation protocol. + + 1 selects the current synchronisation protocol (version 1). This + should be used where possible. + + Kernels with this sync_version entry are able to receive messages + of both version 1 and version 2 of the synchronisation protocol. diff --git a/Documentation/networking/mac80211-injection.txt b/Documentation/networking/mac80211-injection.txt index b30e81a..3a93007 100644 --- a/Documentation/networking/mac80211-injection.txt +++ b/Documentation/networking/mac80211-injection.txt @@ -23,6 +23,10 @@ radiotap headers and used to control injection: IEEE80211_RADIOTAP_F_FRAG: frame will be fragmented if longer than the current fragmentation threshold. + * IEEE80211_RADIOTAP_TX_FLAGS + + IEEE80211_RADIOTAP_F_TX_NOACK: frame should be sent without waiting for + an ACK even if it is a unicast frame The injection code can also skip all other currently defined radiotap fields facilitating replay of captured radiotap headers directly. diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt index 87b3d15..8935834 100644 --- a/Documentation/networking/netdevices.txt +++ b/Documentation/networking/netdevices.txt @@ -73,7 +73,7 @@ dev->hard_start_xmit: has to lock by itself when needed. It is recommended to use a try lock for this and return NETDEV_TX_LOCKED when the spin lock fails. The locking there should also properly protect against - set_multicast_list. Note that the use of NETIF_F_LLTX is deprecated. + set_rx_mode. Note that the use of NETIF_F_LLTX is deprecated. Don't use it for new drivers. Context: Process with BHs disabled or BH (timer), @@ -92,7 +92,7 @@ dev->tx_timeout: Context: BHs disabled Notes: netif_queue_stopped() is guaranteed true -dev->set_multicast_list: +dev->set_rx_mode: Synchronization: netif_tx_lock spinlock. Context: BHs disabled diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index 57a2410..8d67980 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -76,7 +76,16 @@ core. 4.5) DMA descriptors Driver handles both normal and enhanced descriptors. The latter has been only -tested on DWC Ether MAC 10/100/1000 Universal version 3.41a. +tested on DWC Ether MAC 10/100/1000 Universal version 3.41a and later. + +STMMAC supports DMA descriptor to operate both in dual buffer (RING) +and linked-list(CHAINED) mode. In RING each descriptor points to two +data buffer pointers whereas in CHAINED mode they point to only one data +buffer pointer. RING mode is the default. + +In CHAINED mode each descriptor will have pointer to next descriptor in +the list, hence creating the explicit chaining in the descriptor itself, +whereas such explicit chaining is not possible in RING mode. 4.6) Ethtool support Ethtool is supported. Driver statistics and internal errors can be taken using: @@ -235,7 +244,38 @@ reset procedure etc). o enh_desc.c: functions for handling enhanced descriptors o norm_desc.c: functions for handling normal descriptors -5) TODO: +5) Debug Information + +The driver exports many information i.e. internal statistics, +debug information, MAC and DMA registers etc. + +These can be read in several ways depending on the +type of the information actually needed. + +For example a user can be use the ethtool support +to get statistics: e.g. using: ethtool -S ethX +(that shows the Management counters (MMC) if supported) +or sees the MAC/DMA registers: e.g. using: ethtool -d ethX + +Compiling the Kernel with CONFIG_DEBUG_FS and enabling the +STMMAC_DEBUG_FS option the driver will export the following +debugfs entries: + +/sys/kernel/debug/stmmaceth/descriptors_status + To show the DMA TX/RX descriptor rings + +Developer can also use the "debug" module parameter to get +further debug information. + +In the end, there are other macros (that cannot be enabled +via menuconfig) to turn-on the RX/TX DMA debugging, +specific MAC core debug printk etc. Others to enable the +debug in the TX and RX processes. +All these are only useful during the developing stage +and should never enabled inside the code for general usage. +In fact, these can generate an huge amount of debug messages. + +6) TODO: o XGMAC is not supported. o Review the timer optimisation code to use an embedded device that will be available in new chip generations. |
