diff options
Diffstat (limited to 'Documentation/networking/can.txt')
-rw-r--r-- | Documentation/networking/can.txt | 8 |
1 files changed, 1 insertions, 7 deletions
diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index f3089d4..2fa44cb 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -554,12 +554,6 @@ solution for a couple of reasons: not specified in the struct can_frame and therefore it is only valid in CANFD_MTU sized CAN FD frames. - As long as the payload length is <=8 the received CAN frames from CAN FD - capable CAN devices can be received and read by legacy sockets too. When - user-generated CAN FD frames have a payload length <=8 these can be send - by legacy CAN network interfaces too. Sending CAN FD frames with payload - length > 8 to a legacy CAN network interface returns an -EMSGSIZE error. - Implementation hint for new CAN applications: To build a CAN FD aware application use struct canfd_frame as basic CAN @@ -1023,7 +1017,7 @@ solution for a couple of reasons: in case of a bus-off condition after the specified delay time in milliseconds. By default it's off. - "bitrate 125000 sample_point 0.875" + "bitrate 125000 sample-point 0.875" Shows the real bit-rate in bits/sec and the sample-point in the range 0.000..0.999. If the calculation of bit-timing parameters is enabled in the kernel (CONFIG_CAN_CALC_BITTIMING=y), the |