summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/batman-adv.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/batman-adv.txt')
-rw-r--r--Documentation/networking/batman-adv.txt11
1 files changed, 6 insertions, 5 deletions
diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt
index 18afcd8..713f7c0 100644
--- a/Documentation/networking/batman-adv.txt
+++ b/Documentation/networking/batman-adv.txt
@@ -1,4 +1,4 @@
-[state: 27-01-2011]
+[state: 17-04-2011]
BATMAN-ADV
----------
@@ -19,6 +19,7 @@ duce the overhead to a minimum. It does not depend on any (other)
network driver, and can be used on wifi as well as ethernet lan,
vpn, etc ... (anything with ethernet-style layer 2).
+
CONFIGURATION
-------------
@@ -160,13 +161,13 @@ face. Each entry can/has to have the following values:
-> "TQ mac value" - src mac's link quality towards mac address
of a neighbor originator's interface which
is being used for routing
--> "HNA mac" - HNA announced by source mac
+-> "TT mac" - TT announced by source mac
-> "PRIMARY" - this is a primary interface
-> "SEC mac" - secondary mac address of source
(requires preceding PRIMARY)
The TQ value has a range from 4 to 255 with 255 being the best.
-The HNA entries are showing which hosts are connected to the mesh
+The TT entries are showing which hosts are connected to the mesh
via bat0 or being bridged into the mesh network. The PRIMARY/SEC
values are only applied on primary interfaces
@@ -199,7 +200,7 @@ abled during run time. Following log_levels are defined:
0 - All debug output disabled
1 - Enable messages related to routing / flooding / broadcasting
-2 - Enable route or hna added / changed / deleted
+2 - Enable route or tt entry added / changed / deleted
3 - Enable all messages
The debug output can be changed at runtime using the file
@@ -207,7 +208,7 @@ The debug output can be changed at runtime using the file
# echo 2 > /sys/class/net/bat0/mesh/log_level
-will enable debug messages for when routes or HNAs change.
+will enable debug messages for when routes or TTs change.
BATCTL
OpenPOWER on IntegriCloud