1 files changed, 122 insertions, 0 deletions
diff --git a/Documentation/media/uapi/v4l/buffer.rst b/Documentation/media/uapi/v4l/buffer.rst
index ac58966..ae6ee73 100644
--- a/Documentation/media/uapi/v4l/buffer.rst
+++ b/Documentation/media/uapi/v4l/buffer.rst
@@ -34,6 +34,125 @@ flags are copied from the OUTPUT video buffer to the CAPTURE video
 buffer.
 
 
+Interactions between formats, controls and buffers
+==================================================
+
+V4L2 exposes parameters that influence the buffer size, or the way data is
+laid out in the buffer. Those parameters are exposed through both formats and
+controls. One example of such a control is the ``V4L2_CID_ROTATE`` control
+that modifies the direction in which pixels are stored in the buffer, as well
+as the buffer size when the selected format includes padding at the end of
+lines.
+
+The set of information needed to interpret the content of a buffer (e.g. the
+pixel format, the line stride, the tiling orientation or the rotation) is
+collectively referred to in the rest of this section as the buffer layout.
+
+Controls that can modify the buffer layout shall set the
+``V4L2_CTRL_FLAG_MODIFY_LAYOUT`` flag.
+
+Modifying formats or controls that influence the buffer size or layout require
+the stream to be stopped. Any attempt at such a modification while the stream
+is active shall cause the ioctl setting the format or the control to return
+the ``EBUSY`` error code. In that case drivers shall also set the
+``V4L2_CTRL_FLAG_GRABBED`` flag when calling
+:c:func:`VIDIOC_QUERYCTRL` or :c:func:`VIDIOC_QUERY_EXT_CTRL` for such a
+control while the stream is active.
+
+.. note::
+
+   The :c:func:`VIDIOC_S_SELECTION` ioctl can, depending on the hardware (for
+   instance if the device doesn't include a scaler), modify the format in
+   addition to the selection rectangle. Similarly, the
+   :c:func:`VIDIOC_S_INPUT`, :c:func:`VIDIOC_S_OUTPUT`, :c:func:`VIDIOC_S_STD`
+   and :c:func:`VIDIOC_S_DV_TIMINGS` ioctls can also modify the format and
+   selection rectangles. When those ioctls result in a buffer size or layout
+   change, drivers shall handle that condition as they would handle it in the
+   :c:func:`VIDIOC_S_FMT` ioctl in all cases described in this section.
+
+Controls that only influence the buffer layout can be modified at any time
+when the stream is stopped. As they don't influence the buffer size, no
+special handling is needed to synchronize those controls with buffer
+allocation and the ``V4L2_CTRL_FLAG_GRABBED`` flag is cleared once the
+stream is stopped.
+
+Formats and controls that influence the buffer size interact with buffer
+allocation. The simplest way to handle this is for drivers to always require
+buffers to be reallocated in order to change those formats or controls. In
+that case, to perform such changes, userspace applications shall first stop
+the video stream with the :c:func:`VIDIOC_STREAMOFF` ioctl if it is running
+and free all buffers with the :c:func:`VIDIOC_REQBUFS` ioctl if they are
+allocated. After freeing all buffers the ``V4L2_CTRL_FLAG_GRABBED`` flag
+for controls is cleared. The format or controls can then be modified, and
+buffers shall then be reallocated and the stream restarted. A typical ioctl
+sequence is
+
+ #. VIDIOC_STREAMOFF
+ #. VIDIOC_REQBUFS(0)
+ #. VIDIOC_S_EXT_CTRLS
+ #. VIDIOC_S_FMT
+ #. VIDIOC_REQBUFS(n)
+ #. VIDIOC_QBUF
+ #. VIDIOC_STREAMON
+
+The second :c:func:`VIDIOC_REQBUFS` call will take the new format and control
+value into account to compute the buffer size to allocate. Applications can
+also retrieve the size by calling the :c:func:`VIDIOC_G_FMT` ioctl if needed.
+
+.. note::
+
+   The API doesn't mandate the above order for control (3.) and format (4.)
+   changes. Format and controls can be set in a different order, or even
+   interleaved, depending on the device and use case. For instance some
+   controls might behave differently for different pixel formats, in which
+   case the format might need to be set first.
+
+When reallocation is required, any attempt to modify format or controls that
+influences the buffer size while buffers are allocated shall cause the format
+or control set ioctl to return the ``EBUSY`` error. Any attempt to queue a
+buffer too small for the current format or controls shall cause the
+:c:func:`VIDIOC_QBUF` ioctl to return a ``EINVAL`` error.
+
+Buffer reallocation is an expensive operation. To avoid that cost, drivers can
+(and are encouraged to) allow format or controls that influence the buffer
+size to be changed with buffers allocated. In that case, a typical ioctl
+sequence to modify format and controls is
+
+ #. VIDIOC_STREAMOFF
+ #. VIDIOC_S_EXT_CTRLS
+ #. VIDIOC_S_FMT
+ #. VIDIOC_QBUF
+ #. VIDIOC_STREAMON
+
+For this sequence to operate correctly, queued buffers need to be large enough
+for the new format or controls. Drivers shall return a ``ENOSPC`` error in
+response to format change (:c:func:`VIDIOC_S_FMT`) or control changes
+(:c:func:`VIDIOC_S_CTRL` or :c:func:`VIDIOC_S_EXT_CTRLS`) if buffers too small
+for the new format are currently queued. As a simplification, drivers are
+allowed to return a ``EBUSY`` error from these ioctls if any buffer is
+currently queued, without checking the queued buffers sizes.
+
+Additionally, drivers shall return a ``EINVAL`` error from the
+:c:func:`VIDIOC_QBUF` ioctl if the buffer being queued is too small for the
+current format or controls. Together, these requirements ensure that queued
+buffers will always be large enough for the configured format and controls.
+
+Userspace applications can query the buffer size required for a given format
+and controls by first setting the desired control values and then trying the
+desired format. The :c:func:`VIDIOC_TRY_FMT` ioctl will return the required
+buffer size.
+
+ #. VIDIOC_S_EXT_CTRLS(x)
+ #. VIDIOC_TRY_FMT()
+ #. VIDIOC_S_EXT_CTRLS(y)
+ #. VIDIOC_TRY_FMT()
+
+The :c:func:`VIDIOC_CREATE_BUFS` ioctl can then be used to allocate buffers
+based on the queried sizes (for instance by allocating a set of buffers large
+enough for all the desired formats and controls, or by allocating separate set
+of appropriately sized buffers for each use case).
+
+
 .. c:type:: v4l2_buffer
 
 struct v4l2_buffer
@@ -330,6 +449,9 @@ enum v4l2_buf_type
       - 12
       - Buffer for Software Defined Radio (SDR) output stream, see
 	:ref:`sdr`.
+    * - ``V4L2_BUF_TYPE_META_CAPTURE``
+      - 13
+      - Buffer for metadata capture, see :ref:`metadata`.