summaryrefslogtreecommitdiffstats
path: root/Documentation/i2c/busses/i2c-mlxcpld
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/i2c/busses/i2c-mlxcpld')
-rw-r--r--Documentation/i2c/busses/i2c-mlxcpld47
1 files changed, 47 insertions, 0 deletions
diff --git a/Documentation/i2c/busses/i2c-mlxcpld b/Documentation/i2c/busses/i2c-mlxcpld
new file mode 100644
index 0000000..4e46c44
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-mlxcpld
@@ -0,0 +1,47 @@
+Driver i2c-mlxcpld
+
+Author: Michael Shych <michaelsh@mellanox.com>
+
+This is the Mellanox I2C controller logic, implemented in Lattice CPLD
+device.
+Device supports:
+ - Master mode.
+ - One physical bus.
+ - Polling mode.
+
+This controller is equipped within the next Mellanox systems:
+"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410", "msb7800",
+"msn2740", "msn2100".
+
+The next transaction types are supported:
+ - Receive Byte/Block.
+ - Send Byte/Block.
+ - Read Byte/Block.
+ - Write Byte/Block.
+
+Registers:
+CTRL 0x1 - control reg.
+ Resets all the registers.
+HALF_CYC 0x4 - cycle reg.
+ Configure the width of I2C SCL half clock cycle (in 4 LPC_CLK
+ units).
+I2C_HOLD 0x5 - hold reg.
+ OE (output enable) is delayed by value set to this register
+ (in LPC_CLK units)
+CMD 0x6 - command reg.
+ Bit 0, 0 = write, 1 = read.
+ Bits [7:1] - the 7bit Address of the I2C device.
+ It should be written last as it triggers an I2C transaction.
+NUM_DATA 0x7 - data size reg.
+ Number of data bytes to write in read transaction
+NUM_ADDR 0x8 - address reg.
+ Number of address bytes to write in read transaction.
+STATUS 0x9 - status reg.
+ Bit 0 - transaction is completed.
+ Bit 4 - ACK/NACK.
+DATAx 0xa - 0x54 - 68 bytes data buffer regs.
+ For write transaction address is specified in four first bytes
+ (DATA1 - DATA4), data starting from DATA4.
+ For read transactions address is sent in a separate transaction and
+ specified in the four first bytes (DATA0 - DATA3). Data is read
+ starting from DATA0.
OpenPOWER on IntegriCloud