diff options
Diffstat (limited to 'Documentation/hwmon/it87')
| -rw-r--r-- | Documentation/hwmon/it87 | 29 |
1 files changed, 20 insertions, 9 deletions
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87 index c263740..0c16350 100644 --- a/Documentation/hwmon/it87 +++ b/Documentation/hwmon/it87 @@ -2,6 +2,10 @@ Kernel driver it87 ================== Supported chips: + * IT8603E + Prefix: 'it8603' + Addresses scanned: from Super I/O config space (8 I/O ports) + Datasheet: Not publicly available * IT8705F Prefix: 'it87' Addresses scanned: from Super I/O config space (8 I/O ports) @@ -53,7 +57,7 @@ Supported chips: Authors: Christophe Gauthron - Jean Delvare <khali@linux-fr.org> + Jean Delvare <jdelvare@suse.de> Module Parameters @@ -90,7 +94,7 @@ motherboard models. Description ----------- -This driver implements support for the IT8705F, IT8712F, IT8716F, +This driver implements support for the IT8603E, IT8705F, IT8712F, IT8716F, IT8718F, IT8720F, IT8721F, IT8726F, IT8728F, IT8758E, IT8771E, IT8772E, IT8782F, IT8783E/F, and SiS950 chips. @@ -129,6 +133,10 @@ to userspace applications. The IT8728F, IT8771E, and IT8772E are considered compatible with the IT8721F, until a datasheet becomes available (hopefully.) +The IT8603E is a custom design, hardware monitoring part is similar to +IT8728F. It only supports 16-bit fan mode, the full speed mode of the +fan is not supported (value 0 of pwmX_enable). + Temperatures are measured in degrees Celsius. An alarm is triggered once when the Overtemperature Shutdown limit is crossed. @@ -145,13 +153,16 @@ alarm is triggered if the voltage has crossed a programmable minimum or maximum limit. Note that minimum in this case always means 'closest to zero'; this is important for negative voltage measurements. All voltage inputs can measure voltages between 0 and 4.08 volts, with a resolution of -0.016 volt (except IT8721F/IT8758E and IT8728F: 0.012 volt.) The battery -voltage in8 does not have limit registers. - -On the IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs are -internal and scaled inside the chip (in7 (optional for IT8782F and IT8783E/F), -in8 and optionally in3). The driver handles this transparently so user-space -doesn't have to care. +0.016 volt (except IT8603E, IT8721F/IT8758E and IT8728F: 0.012 volt.) The +battery voltage in8 does not have limit registers. + +On the IT8603E, IT8721F/IT8758E, IT8782F, and IT8783E/F, some voltage inputs +are internal and scaled inside the chip: +* in3 (optional) +* in7 (optional for IT8782F and IT8783E/F) +* in8 (always) +* in9 (relevant for IT8603E only) +The driver handles this transparently so user-space doesn't have to care. The VID lines (IT8712F/IT8716F/IT8718F/IT8720F) encode the core voltage value: the voltage level your processor should work with. This is hardcoded by |
