diff options
Diffstat (limited to 'Documentation/filesystems')
| -rw-r--r-- | Documentation/filesystems/Locking | 15 | ||||
| -rw-r--r-- | Documentation/filesystems/configfs/Makefile | 3 | ||||
| -rw-r--r-- | Documentation/filesystems/configfs/configfs.txt | 17 | ||||
| -rw-r--r-- | Documentation/filesystems/configfs/configfs_example_explicit.c (renamed from Documentation/filesystems/configfs/configfs_example.c) | 18 | ||||
| -rw-r--r-- | Documentation/filesystems/configfs/configfs_example_macros.c | 448 | ||||
| -rw-r--r-- | Documentation/filesystems/ext4.txt | 25 | ||||
| -rw-r--r-- | Documentation/filesystems/fiemap.txt | 228 | ||||
| -rw-r--r-- | Documentation/filesystems/ntfs.txt | 4 | ||||
| -rw-r--r-- | Documentation/filesystems/proc.txt | 91 | ||||
| -rw-r--r-- | Documentation/filesystems/quota.txt | 22 | ||||
| -rw-r--r-- | Documentation/filesystems/ubifs.txt | 2 |
11 files changed, 796 insertions, 77 deletions
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 680fb56..8362860 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -144,8 +144,8 @@ prototypes: void (*kill_sb) (struct super_block *); locking rules: may block BKL -get_sb yes yes -kill_sb yes yes +get_sb yes no +kill_sb yes no ->get_sb() returns error or 0 with locked superblock attached to the vfsmount (exclusive on ->s_umount). @@ -409,12 +409,12 @@ ioctl: yes (see below) unlocked_ioctl: no (see below) compat_ioctl: no mmap: no -open: maybe (see below) +open: no flush: no release: no fsync: no (see below) aio_fsync: no -fasync: yes (see below) +fasync: no lock: yes readv: no writev: no @@ -431,13 +431,6 @@ For many filesystems, it is probably safe to acquire the inode semaphore. Note some filesystems (i.e. remote ones) provide no protection for i_size so you will need to use the BKL. -->open() locking is in-transit: big lock partially moved into the methods. -The only exception is ->open() in the instances of file_operations that never -end up in ->i_fop/->proc_fops, i.e. ones that belong to character devices -(chrdev_open() takes lock before replacing ->f_op and calling the secondary -method. As soon as we fix the handling of module reference counters all -instances of ->open() will be called without the BKL. - Note: ext2_release() was *the* source of contention on fs-intensive loads and dropping BKL on ->release() helps to get rid of that (we still grab BKL for cases when we close a file that had been opened r/w, but that diff --git a/Documentation/filesystems/configfs/Makefile b/Documentation/filesystems/configfs/Makefile new file mode 100644 index 0000000..be7ec5e --- /dev/null +++ b/Documentation/filesystems/configfs/Makefile @@ -0,0 +1,3 @@ +ifneq ($(CONFIG_CONFIGFS_FS),) +obj-m += configfs_example_explicit.o configfs_example_macros.o +endif diff --git a/Documentation/filesystems/configfs/configfs.txt b/Documentation/filesystems/configfs/configfs.txt index 44c97e6..fabcb0e 100644 --- a/Documentation/filesystems/configfs/configfs.txt +++ b/Documentation/filesystems/configfs/configfs.txt @@ -311,9 +311,20 @@ the subsystem must be ready for it. [An Example] The best example of these basic concepts is the simple_children -subsystem/group and the simple_child item in configfs_example.c It -shows a trivial object displaying and storing an attribute, and a simple -group creating and destroying these children. +subsystem/group and the simple_child item in configfs_example_explicit.c +and configfs_example_macros.c. It shows a trivial object displaying and +storing an attribute, and a simple group creating and destroying these +children. + +The only difference between configfs_example_explicit.c and +configfs_example_macros.c is how the attributes of the childless item +are defined. The childless item has extended attributes, each with +their own show()/store() operation. This follows a convention commonly +used in sysfs. configfs_example_explicit.c creates these attributes +by explicitly defining the structures involved. Conversely +configfs_example_macros.c uses some convenience macros from configfs.h +to define the attributes. These macros are similar to their sysfs +counterparts. [Hierarchy Navigation and the Subsystem Mutex] diff --git a/Documentation/filesystems/configfs/configfs_example.c b/Documentation/filesystems/configfs/configfs_example_explicit.c index 03964879..d428cc9 100644 --- a/Documentation/filesystems/configfs/configfs_example.c +++ b/Documentation/filesystems/configfs/configfs_example_explicit.c @@ -1,8 +1,10 @@ /* * vim: noexpandtab ts=8 sts=0 sw=8: * - * configfs_example.c - This file is a demonstration module containing - * a number of configfs subsystems. + * configfs_example_explicit.c - This file is a demonstration module + * containing a number of configfs subsystems. It explicitly defines + * each structure without using the helper macros defined in + * configfs.h. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public @@ -281,7 +283,6 @@ static struct config_item *simple_children_make_item(struct config_group *group, if (!simple_child) return ERR_PTR(-ENOMEM); - config_item_init_type_name(&simple_child->item, name, &simple_child_type); @@ -302,8 +303,8 @@ static struct configfs_attribute *simple_children_attrs[] = { }; static ssize_t simple_children_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) + struct configfs_attribute *attr, + char *page) { return sprintf(page, "[02-simple-children]\n" @@ -318,7 +319,7 @@ static void simple_children_release(struct config_item *item) } static struct configfs_item_operations simple_children_item_ops = { - .release = simple_children_release, + .release = simple_children_release, .show_attribute = simple_children_attr_show, }; @@ -368,7 +369,6 @@ static struct config_group *group_children_make_group(struct config_group *group if (!simple_children) return ERR_PTR(-ENOMEM); - config_group_init_type_name(&simple_children->group, name, &simple_children_type); @@ -387,8 +387,8 @@ static struct configfs_attribute *group_children_attrs[] = { }; static ssize_t group_children_attr_show(struct config_item *item, - struct configfs_attribute *attr, - char *page) + struct configfs_attribute *attr, + char *page) { return sprintf(page, "[03-group-children]\n" diff --git a/Documentation/filesystems/configfs/configfs_example_macros.c b/Documentation/filesystems/configfs/configfs_example_macros.c new file mode 100644 index 0000000..d8e30a0 --- /dev/null +++ b/Documentation/filesystems/configfs/configfs_example_macros.c @@ -0,0 +1,448 @@ +/* + * vim: noexpandtab ts=8 sts=0 sw=8: + * + * configfs_example_macros.c - This file is a demonstration module + * containing a number of configfs subsystems. It uses the helper + * macros defined by configfs.h + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this program; if not, write to the + * Free Software Foundation, Inc., 59 Temple Place - Suite 330, + * Boston, MA 021110-1307, USA. + * + * Based on sysfs: + * sysfs is Copyright (C) 2001, 2002, 2003 Patrick Mochel + * + * configfs Copyright (C) 2005 Oracle. All rights reserved. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/slab.h> + +#include <linux/configfs.h> + + + +/* + * 01-childless + * + * This first example is a childless subsystem. It cannot create + * any config_items. It just has attributes. + * + * Note that we are enclosing the configfs_subsystem inside a container. + * This is not necessary if a subsystem has no attributes directly + * on the subsystem. See the next example, 02-simple-children, for + * such a subsystem. + */ + +struct childless { + struct configfs_subsystem subsys; + int showme; + int storeme; +}; + +static inline struct childless *to_childless(struct config_item *item) +{ + return item ? container_of(to_configfs_subsystem(to_config_group(item)), struct childless, subsys) : NULL; +} + +CONFIGFS_ATTR_STRUCT(childless); +#define CHILDLESS_ATTR(_name, _mode, _show, _store) \ +struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR(_name, _mode, _show, _store) +#define CHILDLESS_ATTR_RO(_name, _show) \ +struct childless_attribute childless_attr_##_name = __CONFIGFS_ATTR_RO(_name, _show); + +static ssize_t childless_showme_read(struct childless *childless, + char *page) +{ + ssize_t pos; + + pos = sprintf(page, "%d\n", childless->showme); + childless->showme++; + + return pos; +} + +static ssize_t childless_storeme_read(struct childless *childless, + char *page) +{ + return sprintf(page, "%d\n", childless->storeme); +} + +static ssize_t childless_storeme_write(struct childless *childless, + const char *page, + size_t count) +{ + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + childless->storeme = tmp; + + return count; +} + +static ssize_t childless_description_read(struct childless *childless, + char *page) +{ + return sprintf(page, +"[01-childless]\n" +"\n" +"The childless subsystem is the simplest possible subsystem in\n" +"configfs. It does not support the creation of child config_items.\n" +"It only has a few attributes. In fact, it isn't much different\n" +"than a directory in /proc.\n"); +} + +CHILDLESS_ATTR_RO(showme, childless_showme_read); +CHILDLESS_ATTR(storeme, S_IRUGO | S_IWUSR, childless_storeme_read, + childless_storeme_write); +CHILDLESS_ATTR_RO(description, childless_description_read); + +static struct configfs_attribute *childless_attrs[] = { + &childless_attr_showme.attr, + &childless_attr_storeme.attr, + &childless_attr_description.attr, + NULL, +}; + +CONFIGFS_ATTR_OPS(childless); +static struct configfs_item_operations childless_item_ops = { + .show_attribute = childless_attr_show, + .store_attribute = childless_attr_store, +}; + +static struct config_item_type childless_type = { + .ct_item_ops = &childless_item_ops, + .ct_attrs = childless_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct childless childless_subsys = { + .subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "01-childless", + .ci_type = &childless_type, + }, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 02-simple-children + * + * This example merely has a simple one-attribute child. Note that + * there is no extra attribute structure, as the child's attribute is + * known from the get-go. Also, there is no container for the + * subsystem, as it has no attributes of its own. + */ + +struct simple_child { + struct config_item item; + int storeme; +}; + +static inline struct simple_child *to_simple_child(struct config_item *item) +{ + return item ? container_of(item, struct simple_child, item) : NULL; +} + +static struct configfs_attribute simple_child_attr_storeme = { + .ca_owner = THIS_MODULE, + .ca_name = "storeme", + .ca_mode = S_IRUGO | S_IWUSR, +}; + +static struct configfs_attribute *simple_child_attrs[] = { + &simple_child_attr_storeme, + NULL, +}; + +static ssize_t simple_child_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + ssize_t count; + struct simple_child *simple_child = to_simple_child(item); + + count = sprintf(page, "%d\n", simple_child->storeme); + + return count; +} + +static ssize_t simple_child_attr_store(struct config_item *item, + struct configfs_attribute *attr, + const char *page, size_t count) +{ + struct simple_child *simple_child = to_simple_child(item); + unsigned long tmp; + char *p = (char *) page; + + tmp = simple_strtoul(p, &p, 10); + if (!p || (*p && (*p != '\n'))) + return -EINVAL; + + if (tmp > INT_MAX) + return -ERANGE; + + simple_child->storeme = tmp; + + return count; +} + +static void simple_child_release(struct config_item *item) +{ + kfree(to_simple_child(item)); +} + +static struct configfs_item_operations simple_child_item_ops = { + .release = simple_child_release, + .show_attribute = simple_child_attr_show, + .store_attribute = simple_child_attr_store, +}; + +static struct config_item_type simple_child_type = { + .ct_item_ops = &simple_child_item_ops, + .ct_attrs = simple_child_attrs, + .ct_owner = THIS_MODULE, +}; + + +struct simple_children { + struct config_group group; +}; + +static inline struct simple_children *to_simple_children(struct config_item *item) +{ + return item ? container_of(to_config_group(item), struct simple_children, group) : NULL; +} + +static struct config_item *simple_children_make_item(struct config_group *group, const char *name) +{ + struct simple_child *simple_child; + + simple_child = kzalloc(sizeof(struct simple_child), GFP_KERNEL); + if (!simple_child) + return ERR_PTR(-ENOMEM); + + config_item_init_type_name(&simple_child->item, name, + &simple_child_type); + + simple_child->storeme = 0; + + return &simple_child->item; +} + +static struct configfs_attribute simple_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *simple_children_attrs[] = { + &simple_children_attr_description, + NULL, +}; + +static ssize_t simple_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[02-simple-children]\n" +"\n" +"This subsystem allows the creation of child config_items. These\n" +"items have only one attribute that is readable and writeable.\n"); +} + +static void simple_children_release(struct config_item *item) +{ + kfree(to_simple_children(item)); +} + +static struct configfs_item_operations simple_children_item_ops = { + .release = simple_children_release, + .show_attribute = simple_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations simple_children_group_ops = { + .make_item = simple_children_make_item, +}; + +static struct config_item_type simple_children_type = { + .ct_item_ops = &simple_children_item_ops, + .ct_group_ops = &simple_children_group_ops, + .ct_attrs = simple_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem simple_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "02-simple-children", + .ci_type = &simple_children_type, + }, + }, +}; + + +/* ----------------------------------------------------------------- */ + +/* + * 03-group-children + * + * This example reuses the simple_children group from above. However, + * the simple_children group is not the subsystem itself, it is a + * child of the subsystem. Creation of a group in the subsystem creates + * a new simple_children group. That group can then have simple_child + * children of its own. + */ + +static struct config_group *group_children_make_group(struct config_group *group, const char *name) +{ + struct simple_children *simple_children; + + simple_children = kzalloc(sizeof(struct simple_children), + GFP_KERNEL); + if (!simple_children) + return ERR_PTR(-ENOMEM); + + config_group_init_type_name(&simple_children->group, name, + &simple_children_type); + + return &simple_children->group; +} + +static struct configfs_attribute group_children_attr_description = { + .ca_owner = THIS_MODULE, + .ca_name = "description", + .ca_mode = S_IRUGO, +}; + +static struct configfs_attribute *group_children_attrs[] = { + &group_children_attr_description, + NULL, +}; + +static ssize_t group_children_attr_show(struct config_item *item, + struct configfs_attribute *attr, + char *page) +{ + return sprintf(page, +"[03-group-children]\n" +"\n" +"This subsystem allows the creation of child config_groups. These\n" +"groups are like the subsystem simple-children.\n"); +} + +static struct configfs_item_operations group_children_item_ops = { + .show_attribute = group_children_attr_show, +}; + +/* + * Note that, since no extra work is required on ->drop_item(), + * no ->drop_item() is provided. + */ +static struct configfs_group_operations group_children_group_ops = { + .make_group = group_children_make_group, +}; + +static struct config_item_type group_children_type = { + .ct_item_ops = &group_children_item_ops, + .ct_group_ops = &group_children_group_ops, + .ct_attrs = group_children_attrs, + .ct_owner = THIS_MODULE, +}; + +static struct configfs_subsystem group_children_subsys = { + .su_group = { + .cg_item = { + .ci_namebuf = "03-group-children", + .ci_type = &group_children_type, + }, + }, +}; + +/* ----------------------------------------------------------------- */ + +/* + * We're now done with our subsystem definitions. + * For convenience in this module, here's a list of them all. It + * allows the init function to easily register them. Most modules + * will only have one subsystem, and will only call register_subsystem + * on it directly. + */ +static struct configfs_subsystem *example_subsys[] = { + &childless_subsys.subsys, + &simple_children_subsys, + &group_children_subsys, + NULL, +}; + +static int __init configfs_example_init(void) +{ + int ret; + int i; + struct configfs_subsystem *subsys; + + for (i = 0; example_subsys[i]; i++) { + subsys = example_subsys[i]; + + config_group_init(&subsys->su_group); + mutex_init(&subsys->su_mutex); + ret = configfs_register_subsystem(subsys); + if (ret) { + printk(KERN_ERR "Error %d while registering subsystem %s\n", + ret, + subsys->su_group.cg_item.ci_namebuf); + goto out_unregister; + } + } + + return 0; + +out_unregister: + for (; i >= 0; i--) { + configfs_unregister_subsystem(example_subsys[i]); + } + + return ret; +} + +static void __exit configfs_example_exit(void) +{ + int i; + + for (i = 0; example_subsys[i]; i++) { + configfs_unregister_subsystem(example_subsys[i]); + } +} + +module_init(configfs_example_init); +module_exit(configfs_example_exit); +MODULE_LICENSE("GPL"); diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 80e193d..eb154ef 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -26,9 +26,15 @@ Mailing list: linux-ext4@vger.kernel.org git://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git - - Create a new filesystem using the ext4dev filesystem type: + - Note that it is highly important to install the mke2fs.conf file + that comes with the e2fsprogs 1.41.x sources in /etc/mke2fs.conf. If + you have edited the /etc/mke2fs.conf file installed on your system, + you will need to merge your changes with the version from e2fsprogs + 1.41.x. - # mke2fs -t ext4dev /dev/hda1 + - Create a new filesystem using the ext4 filesystem type: + + # mke2fs -t ext4 /dev/hda1 Or configure an existing ext3 filesystem to support extents and set the test_fs flag to indicate that it's ok for an in-development @@ -41,13 +47,13 @@ Mailing list: linux-ext4@vger.kernel.org # tune2fs -I 256 /dev/hda1 - (Note: we currently do not have tools to convert an ext4dev + (Note: we currently do not have tools to convert an ext4 filesystem back to ext3; so please do not do try this on production filesystems.) - Mounting: - # mount -t ext4dev /dev/hda1 /wherever + # mount -t ext4 /dev/hda1 /wherever - When comparing performance with other filesystems, remember that ext3/4 by default offers higher data integrity guarantees than most. @@ -171,6 +177,11 @@ barrier=<0|1(*)> This enables/disables the use of write barriers in your disks are battery-backed in one way or another, disabling barriers may safely improve performance. +inode_readahead=n This tuning parameter controls the maximum + number of inode table blocks that ext4's inode + table readahead algorithm will pre-read into + the buffer cache. The default value is 32 blocks. + orlov (*) This enables the new Orlov block allocator. It is enabled by default. @@ -212,6 +223,11 @@ errors=remount-ro(*) Remount the filesystem read-only on an error. errors=continue Keep going on a filesystem error. errors=panic Panic and halt the machine if an error occurs. +data_err=ignore(*) Just print an error message if an error occurs + in a file data buffer in ordered mode. +data_err=abort Abort the journal if an error occurs in a file + data buffer in ordered mode. + grpid Give objects the same group ID as their creator. bsdgroups @@ -246,6 +262,7 @@ stripe=n Number of filesystem blocks that mballoc will try delalloc (*) Deferring block allocation until write-out time. nodelalloc Disable delayed allocation. Blocks are allocation when data is copied from user to page cache. + Data Mode ========= There are 3 different data modes: diff --git a/Documentation/filesystems/fiemap.txt b/Documentation/filesystems/fiemap.txt new file mode 100644 index 0000000..1e3defc --- /dev/null +++ b/Documentation/filesystems/fiemap.txt @@ -0,0 +1,228 @@ +============ +Fiemap Ioctl +============ + +The fiemap ioctl is an efficient method for userspace to get file +extent mappings. Instead of block-by-block mapping (such as bmap), fiemap +returns a list of extents. + + +Request Basics +-------------- + +A fiemap request is encoded within struct fiemap: + +struct fiemap { + __u64 fm_start; /* logical offset (inclusive) at + * which to start mapping (in) */ + __u64 fm_length; /* logical length of mapping which + * userspace cares about (in) */ + __u32 fm_flags; /* FIEMAP_FLAG_* flags for request (in/out) */ + __u32 fm_mapped_extents; /* number of extents that were + * mapped (out) */ + __u32 fm_extent_count; /* size of fm_extents array (in) */ + __u32 fm_reserved; + struct fiemap_extent fm_extents[0]; /* array of mapped extents (out) */ +}; + + +fm_start, and fm_length specify the logical range within the file +which the process would like mappings for. Extents returned mirror +those on disk - that is, the logical offset of the 1st returned extent +may start before fm_start, and the range covered by the last returned +extent may end after fm_length. All offsets and lengths are in bytes. + +Certain flags to modify the way in which mappings are looked up can be +set in fm_flags. If the kernel doesn't understand some particular +flags, it will return EBADR and the contents of fm_flags will contain +the set of flags which caused the error. If the kernel is compatible +with all flags passed, the contents of fm_flags will be unmodified. +It is up to userspace to determine whether rejection of a particular +flag is fatal to it's operation. This scheme is intended to allow the +fiemap interface to grow in the future but without losing +compatibility with old software. + +fm_extent_count specifies the number of elements in the fm_extents[] array +that can be used to return extents. If fm_extent_count is zero, then the +fm_extents[] array is ignored (no extents will be returned), and the +fm_mapped_extents count will hold the number of extents needed in +fm_extents[] to hold the file's current mapping. Note that there is +nothing to prevent the file from changing between calls to FIEMAP. + +The following flags can be set in fm_flags: + +* FIEMAP_FLAG_SYNC +If this flag is set, the kernel will sync the file before mapping extents. + +* FIEMAP_FLAG_XATTR +If this flag is set, the extents returned will describe the inodes +extended attribute lookup tree, instead of it's data tree. + + +Extent Mapping +-------------- + +Extent information is returned within the embedded fm_extents array +which userspace must allocate along with the fiemap structure. The +number of elements in the fiemap_extents[] array should be passed via +fm_extent_count. The number of extents mapped by kernel will be +returned via fm_mapped_extents. If the number of fiemap_extents +allocated is less than would be required to map the requested range, +the maximum number of extents that can be mapped in the fm_extent[] +array will be returned and fm_mapped_extents will be equal to +fm_extent_count. In that case, the last extent in the array will not +complete the requested range and will not have the FIEMAP_EXTENT_LAST +flag set (see the next section on extent flags). + +Each extent is described by a single fiemap_extent structure as +returned in fm_extents. + +struct fiemap_extent { + __u64 fe_logical; /* logical offset in bytes for the start of + * the extent */ + __u64 fe_physical; /* physical offset in bytes for the start + * of the extent */ + __u64 fe_length; /* length in bytes for the extent */ + __u64 fe_reserved64[2]; + __u32 fe_flags; /* FIEMAP_EXTENT_* flags for this extent */ + __u32 fe_reserved[3]; +}; + +All offsets and lengths are in bytes and mirror those on disk. It is valid +for an extents logical offset to start before the request or it's logical +length to extend past the request. Unless FIEMAP_EXTENT_NOT_ALIGNED is +returned, fe_logical, fe_physical, and fe_length will be aligned to the +block size of the file system. With the exception of extents flagged as +FIEMAP_EXTENT_MERGED, adjacent extents will not be merged. + +The fe_flags field contains flags which describe the extent returned. +A special flag, FIEMAP_EXTENT_LAST is always set on the last extent in +the file so that the process making fiemap calls can determine when no +more extents are available, without having to call the ioctl again. + +Some flags are intentionally vague and will always be set in the +presence of other more specific flags. This way a program looking for +a general property does not have to know all existing and future flags +which imply that property. + +For example, if FIEMAP_EXTENT_DATA_INLINE or FIEMAP_EXTENT_DATA_TAIL +are set, FIEMAP_EXTENT_NOT_ALIGNED will also be set. A program looking +for inline or tail-packed data can key on the specific flag. Software +which simply cares not to try operating on non-aligned extents +however, can just key on FIEMAP_EXTENT_NOT_ALIGNED, and not have to +worry about all present and future flags which might imply unaligned +data. Note that the opposite is not true - it would be valid for +FIEMAP_EXTENT_NOT_ALIGNED to appear alone. + +* FIEMAP_EXTENT_LAST +This is the last extent in the file. A mapping attempt past this +extent will return nothing. + +* FIEMAP_EXTENT_UNKNOWN +The location of this extent is currently unknown. This may indicate +the data is stored on an inaccessible volume or that no storage has +been allocated for the file yet. + +* FIEMAP_EXTENT_DELALLOC + - This will also set FIEMAP_EXTENT_UNKNOWN. +Delayed allocation - while there is data for this extent, it's +physical location has not been allocated yet. + +* FIEMAP_EXTENT_ENCODED +This extent does not consist of plain filesystem blocks but is +encoded (e.g. encrypted or compressed). Reading the data in this +extent via I/O to the block device will have undefined results. + +Note that it is *always* undefined to try to update the data +in-place by writing to the indicated location without the +assistance of the filesystem, or to access the data using the +information returned by the FIEMAP interface while the filesystem +is mounted. In other words, user applications may only read the +extent data via I/O to the block device while the filesystem is +unmounted, and then only if the FIEMAP_EXTENT_ENCODED flag is +clear; user applications must not try reading or writing to the +filesystem via the block device under any other circumstances. + +* FIEMAP_EXTENT_DATA_ENCRYPTED + - This will also set FIEMAP_EXTENT_ENCODED +The data in this extent has been encrypted by the file system. + +* FIEMAP_EXTENT_NOT_ALIGNED +Extent offsets and length are not guaranteed to be block aligned. + +* FIEMAP_EXTENT_DATA_INLINE + This will also set FIEMAP_EXTENT_NOT_ALIGNED +Data is located within a meta data block. + +* FIEMAP_EXTENT_DATA_TAIL + This will also set FIEMAP_EXTENT_NOT_ALIGNED +Data is packed into a block with data from other files. + +* FIEMAP_EXTENT_UNWRITTEN +Unwritten extent - the extent is allocated but it's data has not been +initialized. This indicates the extent's data will be all zero if read +through the filesystem but the contents are undefined if read directly from +the device. + +* FIEMAP_EXTENT_MERGED +This will be set when a file does not support extents, i.e., it uses a block +based addressing scheme. Since returning an extent for each block back to +userspace would be highly inefficient, the kernel will try to merge most +adjacent blocks into 'extents'. + + +VFS -> File System Implementation +--------------------------------- + +File systems wishing to support fiemap must implement a ->fiemap callback on +their inode_operations structure. The fs ->fiemap call is responsible for +defining it's set of supported fiemap flags, and calling a helper function on +each discovered extent: + +struct inode_operations { + ... + + int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, + u64 len); + +->fiemap is passed struct fiemap_extent_info which describes the +fiemap request: + +struct fiemap_extent_info { + unsigned int fi_flags; /* Flags as passed from user */ + unsigned int fi_extents_mapped; /* Number of mapped extents */ + unsigned int fi_extents_max; /* Size of fiemap_extent array */ + struct fiemap_extent *fi_extents_start; /* Start of fiemap_extent array */ +}; + +It is intended that the file system should not need to access any of this +structure directly. + + +Flag checking should be done at the beginning of the ->fiemap callback via the +fiemap_check_flags() helper: + +int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags); + +The struct fieinfo should be passed in as recieved from ioctl_fiemap(). The +set of fiemap flags which the fs understands should be passed via fs_flags. If +fiemap_check_flags finds invalid user flags, it will place the bad values in +fieinfo->fi_flags and return -EBADR. If the file system gets -EBADR, from +fiemap_check_flags(), it should immediately exit, returning that error back to +ioctl_fiemap(). + + +For each extent in the request range, the file system should call +the helper function, fiemap_fill_next_extent(): + +int fiemap_fill_next_extent(struct fiemap_extent_info *info, u64 logical, + u64 phys, u64 len, u32 flags, u32 dev); + +fiemap_fill_next_extent() will use the passed values to populate the +next free extent in the fm_extents array. 'General' extent flags will +automatically be set from specific flags on behalf of the calling file +system so that the userspace API is not broken. + +fiemap_fill_next_extent() returns 0 on success, and 1 when the +user-supplied fm_extents array is full. If an error is encountered +while copying the extent to user memory, -EFAULT will be returned. diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt index e79ee2d..ac2a261 100644 --- a/Documentation/filesystems/ntfs.txt +++ b/Documentation/filesystems/ntfs.txt @@ -40,7 +40,7 @@ Web site ======== There is plenty of additional information on the linux-ntfs web site -at http://linux-ntfs.sourceforge.net/ +at http://www.linux-ntfs.org/ The web site has a lot of additional information, such as a comprehensive FAQ, documentation on the NTFS on-disk format, information on the Linux-NTFS @@ -272,7 +272,7 @@ And you would know that /dev/hda2 has a size of 37768814 - 4209030 + 1 = For Win2k and later dynamic disks, you can for example use the ldminfo utility which is part of the Linux LDM tools (the latest version at the time of writing is linux-ldm-0.0.8.tar.bz2). You can download it from: - http://linux-ntfs.sourceforge.net/downloads.html + http://www.linux-ntfs.org/ Simply extract the downloaded archive (tar xvjf linux-ldm-0.0.8.tar.bz2), go into it (cd linux-ldm-0.0.8) and change to the test directory (cd test). You will find the precompiled (i386) ldminfo utility there. NOTE: You will not be diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index 6455782..b488eda 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -923,45 +923,44 @@ CPUs. The "procs_blocked" line gives the number of processes currently blocked, waiting for I/O to complete. + 1.9 Ext4 file system parameters ------------------------------ -Ext4 file system have one directory per partition under /proc/fs/ext4/ -# ls /proc/fs/ext4/hdc/ -group_prealloc max_to_scan mb_groups mb_history min_to_scan order2_req -stats stream_req - -mb_groups: -This file gives the details of multiblock allocator buddy cache of free blocks - -mb_history: -Multiblock allocation history. - -stats: -This file indicate whether the multiblock allocator should start collecting -statistics. The statistics are shown during unmount -group_prealloc: -The multiblock allocator normalize the block allocation request to -group_prealloc filesystem blocks if we don't have strip value set. -The stripe value can be specified at mount time or during mke2fs. +Information about mounted ext4 file systems can be found in +/proc/fs/ext4. Each mounted filesystem will have a directory in +/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or +/proc/fs/ext4/dm-0). The files in each per-device directory are shown +in Table 1-10, below. -max_to_scan: -How long multiblock allocator can look for a best extent (in found extents) - -min_to_scan: -How long multiblock allocator must look for a best extent - -order2_req: -Multiblock allocator use 2^N search using buddies only for requests greater -than or equal to order2_req. The request size is specfied in file system -blocks. A value of 2 indicate only if the requests are greater than or equal -to 4 blocks. +Table 1-10: Files in /proc/fs/ext4/<devname> +.............................................................................. + File Content + mb_groups details of multiblock allocator buddy cache of free blocks + mb_history multiblock allocation history + stats controls whether the multiblock allocator should start + collecting statistics, which are shown during the unmount + group_prealloc the multiblock allocator will round up allocation + requests to a multiple of this tuning parameter if the + stripe size is not set in the ext4 superblock + max_to_scan The maximum number of extents the multiblock allocator + will search to find the best extent + min_to_scan The minimum number of extents the multiblock allocator + will search to find the best extent + order2_req Tuning parameter which controls the minimum size for + requests (as a power of 2) where the buddy cache is + used + stream_req Files which have fewer blocks than this tunable + parameter will have their blocks allocated out of a + block group specific preallocation pool, so that small + files are packed closely together. Each large file + will have its blocks allocated out of its own unique + preallocation pool. +inode_readahead Tuning parameter which controls the maximum number of + inode table blocks that ext4's inode table readahead + algorithm will pre-read into the buffer cache +.............................................................................. -stream_req: -Files smaller than stream_req are served by the stream allocator, whose -purpose is to pack requests as close each to other as possible to -produce smooth I/O traffic. Avalue of 16 indicate that file smaller than 16 -filesystem block size will use group based preallocation. ------------------------------------------------------------------------------ Summary @@ -1332,12 +1331,24 @@ determine whether or not they are still functioning properly. Because the NMI watchdog shares registers with oprofile, by disabling the NMI watchdog, oprofile may have more registers to utilize. -maps_protect ------------- +msgmni +------ + +Maximum number of message queue ids on the system. +This value scales to the amount of lowmem. It is automatically recomputed +upon memory add/remove or ipc namespace creation/removal. +When a value is written into this file, msgmni's value becomes fixed, i.e. it +is not recomputed anymore when one of the above events occurs. +Use auto_msgmni to change this behavior. + +auto_msgmni +----------- -Enables/Disables the protection of the per-process proc entries "maps" and -"smaps". When enabled, the contents of these files are visible only to -readers that are allowed to ptrace() the given process. +Enables/Disables automatic recomputing of msgmni upon memory add/remove or +upon ipc namespace creation/removal (see the msgmni description above). +Echoing "1" into this file enables msgmni automatic recomputing. +Echoing "0" turns it off. +auto_msgmni default value is 1. 2.4 /proc/sys/vm - The virtual memory subsystem @@ -2394,6 +2405,8 @@ The following 4 memory types are supported: - (bit 1) anonymous shared memory - (bit 2) file-backed private memory - (bit 3) file-backed shared memory + - (bit 4) ELF header pages in file-backed private memory areas (it is + effective only if the bit 2 is cleared) Note that MMIO pages such as frame buffer are never dumped and vDSO pages are always dumped regardless of the bitmask status. diff --git a/Documentation/filesystems/quota.txt b/Documentation/filesystems/quota.txt index a590c40..5e8de25 100644 --- a/Documentation/filesystems/quota.txt +++ b/Documentation/filesystems/quota.txt @@ -3,14 +3,14 @@ Quota subsystem =============== Quota subsystem allows system administrator to set limits on used space and -number of used inodes (inode is a filesystem structure which is associated -with each file or directory) for users and/or groups. For both used space and -number of used inodes there are actually two limits. The first one is called -softlimit and the second one hardlimit. An user can never exceed a hardlimit -for any resource. User is allowed to exceed softlimit but only for limited -period of time. This period is called "grace period" or "grace time". When -grace time is over, user is not able to allocate more space/inodes until he -frees enough of them to get below softlimit. +number of used inodes (inode is a filesystem structure which is associated with +each file or directory) for users and/or groups. For both used space and number +of used inodes there are actually two limits. The first one is called softlimit +and the second one hardlimit. An user can never exceed a hardlimit for any +resource (unless he has CAP_SYS_RESOURCE capability). User is allowed to exceed +softlimit but only for limited period of time. This period is called "grace +period" or "grace time". When grace time is over, user is not able to allocate +more space/inodes until he frees enough of them to get below softlimit. Quota limits (and amount of grace time) are set independently for each filesystem. @@ -53,6 +53,12 @@ in parentheses): QUOTA_NL_BSOFTLONGWARN - space (block) softlimit is exceeded longer than given grace period. QUOTA_NL_BSOFTWARN - space (block) softlimit + - four warnings are also defined for the event when user stops + exceeding some limit: + QUOTA_NL_IHARDBELOW - inode hardlimit + QUOTA_NL_ISOFTBELOW - inode softlimit + QUOTA_NL_BHARDBELOW - space (block) hardlimit + QUOTA_NL_BSOFTBELOW - space (block) softlimit QUOTA_NL_A_DEV_MAJOR (u32) - major number of a device with the affected filesystem QUOTA_NL_A_DEV_MINOR (u32) diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt index 540e9e7..6a0d70a 100644 --- a/Documentation/filesystems/ubifs.txt +++ b/Documentation/filesystems/ubifs.txt @@ -57,7 +57,7 @@ Similarly to JFFS2, UBIFS supports on-the-flight compression which makes it possible to fit quite a lot of data to the flash. Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts. -It does not need stuff like ckfs.ext2. UBIFS automatically replays its +It does not need stuff like fsck.ext2. UBIFS automatically replays its journal and recovers from crashes, ensuring that the on-flash data structures are consistent. |
