diff options
Diffstat (limited to 'Documentation/fb')
| -rw-r--r-- | Documentation/fb/arkfb.txt | 68 | ||||
| -rw-r--r-- | Documentation/fb/vt8623fb.txt | 64 |
2 files changed, 132 insertions, 0 deletions
diff --git a/Documentation/fb/arkfb.txt b/Documentation/fb/arkfb.txt new file mode 100644 index 0000000..e8487a9 --- /dev/null +++ b/Documentation/fb/arkfb.txt @@ -0,0 +1,68 @@ + + arkfb - fbdev driver for ARK Logic chips + ======================================== + + +Supported Hardware +================== + + ARK 2000PV chip + ICS 5342 ramdac + + - only BIOS initialized VGA devices supported + - probably not working on big endian + + +Supported Features +================== + + * 4 bpp pseudocolor modes (with 18bit palette, two variants) + * 8 bpp pseudocolor mode (with 18bit palette) + * 16 bpp truecolor modes (RGB 555 and RGB 565) + * 24 bpp truecolor mode (RGB 888) + * 32 bpp truecolor mode (RGB 888) + * text mode (activated by bpp = 0) + * doublescan mode variant (not available in text mode) + * panning in both directions + * suspend/resume support + +Text mode is supported even in higher resolutions, but there is limitation to +lower pixclocks (i got maximum about 70 MHz, it is dependent on specific +hardware). This limitation is not enforced by driver. Text mode supports 8bit +wide fonts only (hardware limitation) and 16bit tall fonts (driver +limitation). Unfortunately character attributes (like color) in text mode are +broken for unknown reason, so its usefulness is limited. + +There are two 4 bpp modes. First mode (selected if nonstd == 0) is mode with +packed pixels, high nibble first. Second mode (selected if nonstd == 1) is mode +with interleaved planes (1 byte interleave), MSB first. Both modes support +8bit wide fonts only (driver limitation). + +Suspend/resume works on systems that initialize video card during resume and +if device is active (for example used by fbcon). + + +Missing Features +================ +(alias TODO list) + + * secondary (not initialized by BIOS) device support + * big endian support + * DPMS support + * MMIO support + * interlaced mode variant + * support for fontwidths != 8 in 4 bpp modes + * support for fontheight != 16 in text mode + * hardware cursor + * vsync synchronization + * feature connector support + * acceleration support (8514-like 2D) + + +Known bugs +========== + + * character attributes (and cursor) in text mode are broken + +-- +Ondrej Zajicek <santiago@crfreenet.org> diff --git a/Documentation/fb/vt8623fb.txt b/Documentation/fb/vt8623fb.txt new file mode 100644 index 0000000..f654576 --- /dev/null +++ b/Documentation/fb/vt8623fb.txt @@ -0,0 +1,64 @@ + + vt8623fb - fbdev driver for graphics core in VIA VT8623 chipset + =============================================================== + + +Supported Hardware +================== + + VIA VT8623 [CLE266] chipset and its graphics core + (known as CastleRock or Unichrome) + +I tested vt8623fb on VIA EPIA ML-6000 + + +Supported Features +================== + + * 4 bpp pseudocolor modes (with 18bit palette, two variants) + * 8 bpp pseudocolor mode (with 18bit palette) + * 16 bpp truecolor mode (RGB 565) + * 32 bpp truecolor mode (RGB 888) + * text mode (activated by bpp = 0) + * doublescan mode variant (not available in text mode) + * panning in both directions + * suspend/resume support + * DPMS support + +Text mode is supported even in higher resolutions, but there is limitation to +lower pixclocks (maximum about 100 MHz). This limitation is not enforced by +driver. Text mode supports 8bit wide fonts only (hardware limitation) and +16bit tall fonts (driver limitation). + +There are two 4 bpp modes. First mode (selected if nonstd == 0) is mode with +packed pixels, high nibble first. Second mode (selected if nonstd == 1) is mode +with interleaved planes (1 byte interleave), MSB first. Both modes support +8bit wide fonts only (driver limitation). + +Suspend/resume works on systems that initialize video card during resume and +if device is active (for example used by fbcon). + + +Missing Features +================ +(alias TODO list) + + * secondary (not initialized by BIOS) device support + * MMIO support + * interlaced mode variant + * support for fontwidths != 8 in 4 bpp modes + * support for fontheight != 16 in text mode + * hardware cursor + * video overlay support + * vsync synchronization + * acceleration support (8514-like 2D, busmaster transfers) + + +Known bugs +========== + + * cursor disable in text mode doesn't work + + +-- +Ondrej Zajicek <santiago@crfreenet.org> |
