diff options
Diffstat (limited to 'Documentation/dvb')
| -rw-r--r-- | Documentation/dvb/ci.txt | 219 |
1 files changed, 219 insertions, 0 deletions
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt new file mode 100644 index 0000000..62e0701 --- /dev/null +++ b/Documentation/dvb/ci.txt @@ -0,0 +1,219 @@ +* For the user +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +NOTE: This document describes the usage of the high level CI API as +in accordance to the Linux DVB API. This is a not a documentation for the, +existing low level CI API. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +To utilize the High Level CI capabilities, + +(1*) This point is valid only for the Twinhan/clones + For the Twinhan/Twinhan clones, the dst_ca module handles the CI + hardware handling.This module is loaded automatically if a CI + (Common Interface, that holds the CAM (Conditional Access Module) + is detected. + +(2) one requires a userspace application, ca_zap. This small userland + application is in charge of sending the descrambling related information + to the CAM. + +This application requires the following to function properly as of now. + + (a) Tune to a valid channel, with szap. + eg: $ szap -c channels.conf -r "TMC" -x + + (b) a channels.conf containing a valid PMT PID + + eg: TMC:11996:h:0:27500:278:512:650:321 + + here 278 is a valid PMT PID. the rest of the values are the + same ones that szap uses. + + (c) after running a szap, you have to run ca_zap, for the + descrambler to function, + + eg: $ ca_zap patched_channels.conf "TMC" + + The patched means a patch to apply to scan, such that scan can + generate a channels.conf_with pmt, which has this PMT PID info + (NOTE: szap cannot use this channels.conf with the PMT_PID) + + + (d) Hopeflly Enjoy your favourite subscribed channel as you do with + a FTA card. + +(3) Currently ca_zap, and dst_test, both are meant for demonstration + purposes only, they can become full fledged applications if necessary. + + +* Cards that fall in this category +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +At present the cards that fall in this category are the Twinhan and it's +clones, these cards are available as VVMER, Tomato, Hercules, Orange and +so on. + +* CI modules that are supported +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +The CI module support is largely dependant upon the firmware on the cards +Some cards do support almost all of the available CI modules. There is +nothing much that can be done in order to make additional CI modules +working with these cards. + +Modules that have been tested by this driver at present are + +(1) Irdeto 1 and 2 from SCM +(2) Viaccess from SCM +(3) Dragoncam + +* The High level CI API +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +* For the programmer +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +With the High Level CI approach any new card with almost any random +architecture can be implemented with this style, the definitions +insidethe switch statement can be easily adapted for any card, thereby +eliminating the need for any additional ioctls. + +The disadvantage is that the driver/hardware has to manage the rest. For +the application programmer it would be as simple as sending/receiving an +array to/from the CI ioctls as defined in the Linux DVB API. No changes +have been made in the API to accomodate this feature. + + +* Why the need for another CI interface ? +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +This is one of the most commonly asked question. Well a nice question. +Strictly speaking this is not a new interface. + +The CI interface is defined in the DVB API in ca.h as + +typedef struct ca_slot_info { + int num; /* slot number */ + + int type; /* CA interface this slot supports */ +#define CA_CI 1 /* CI high level interface */ +#define CA_CI_LINK 2 /* CI link layer level interface */ +#define CA_CI_PHYS 4 /* CI physical layer level interface */ +#define CA_DESCR 8 /* built-in descrambler */ +#define CA_SC 128 /* simple smart card interface */ + + unsigned int flags; +#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */ +#define CA_CI_MODULE_READY 2 +} ca_slot_info_t; + + + +This CI interface follows the CI high level interface, which is not +implemented by most applications. Hence this area is revisited. + +This CI interface is quite different in the case that it tries to +accomodate all other CI based devices, that fall into the other categories + +This means that this CI interface handles the EN50221 style tags in the +Application layer only and no session management is taken care of by the +application. The driver/hardware will take care of all that. + +This interface is purely an EN50221 interface exchanging APDU's. This +means that no session management, link layer or a transport layer do +exist in this case in the application to driver communication. It is +as simple as that. The driver/hardware has to take care of that. + + +With this High Level CI interface, the interface can be defined with the +regular ioctls. + +All these ioctls are also valid for the High level CI interface + +#define CA_RESET _IO('o', 128) +#define CA_GET_CAP _IOR('o', 129, ca_caps_t) +#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t) +#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t) +#define CA_GET_MSG _IOR('o', 132, ca_msg_t) +#define CA_SEND_MSG _IOW('o', 133, ca_msg_t) +#define CA_SET_DESCR _IOW('o', 134, ca_descr_t) +#define CA_SET_PID _IOW('o', 135, ca_pid_t) + + +On querying the device, the device yields information thus + +CA_GET_SLOT_INFO +---------------------------- +Command = [info] +APP: Number=[1] +APP: Type=[1] +APP: flags=[1] +APP: CI High level interface +APP: CA/CI Module Present + +CA_GET_CAP +---------------------------- +Command = [caps] +APP: Slots=[1] +APP: Type=[1] +APP: Descrambler keys=[16] +APP: Type=[1] + +CA_SEND_MSG +---------------------------- +Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1] +Found CA descriptor @ program level + +(20) ES type=[2] ES pid=[201] ES length =[0 (0x0)] +(25) ES type=[4] ES pid=[301] ES length =[0 (0x0)] +ca_message length is 25 (0x19) bytes +EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00] + + +Not all ioctl's are implemented in the driver from the API, the other +features of the hardware that cannot be implemented by the API are achieved +using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is +used to exchange the data to maintain compatibility with other hardware. + + +/* a message to/from a CI-CAM */ +typedef struct ca_msg { + unsigned int index; + unsigned int type; + unsigned int length; + unsigned char msg[256]; +} ca_msg_t; + + +The flow of data can be described thus, + + + + + + App (User) + ----- + parse + | + | + v + en50221 APDU (package) + -------------------------------------- + | | | High Level CI driver + | | | + | v | + | en50221 APDU (unpackage) | + | | | + | | | + | v | + | sanity checks | + | | | + | | | + | v | + | do (H/W dep) | + -------------------------------------- + | Hardware + | + v + + + + +The High Level CI interface uses the EN50221 DVB standard, following a +standard ensures futureproofness. |
