3 files changed, 49 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
index 5778b9c..1c04a4c 100644
--- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
+++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt
@@ -11,6 +11,7 @@ Optional properties:
   that indicate usb controller index
 - vbus-supply: regulator for vbus
 - disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
 
 Examples:
 usb@02184000 { /* USB OTG */
@@ -20,4 +21,5 @@ usb@02184000 { /* USB OTG */
 	fsl,usbphy = <&usbphy1>;
 	fsl,usbmisc = <&usbmisc 0>;
 	disable-over-current;
+	external-vbus-divider;
 };
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
new file mode 100644
index 0000000..485a9a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -0,0 +1,32 @@
+OMAP HS USB EHCI controller
+
+This device is usually the child of the omap-usb-host
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Required properties:
+
+- compatible: should be "ti,ehci-omap"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Optional properties:
+
+- phys: list of phandles to PHY nodes.
+  This property is required if at least one of the ports are in
+  PHY mode i.e. OMAP_EHCI_PORT_MODE_PHY
+
+To specify the port mode, see
+Documentation/devicetree/bindings/mfd/omap-usb-host.txt
+
+Example for OMAP4:
+
+usbhsehci: ehci@4a064c00 {
+	compatible = "ti,ehci-omap", "usb-ehci";
+	reg = <0x4a064c00 0x400>;
+	interrupts = <0 77 0x4>;
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};
+
diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
new file mode 100644
index 0000000..14ab428
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -0,0 +1,15 @@
+OMAP HS USB OHCI controller (OMAP3 and later)
+
+Required properties:
+
+- compatible: should be "ti,ohci-omap3"
+- reg: should contain one register range i.e. start and length
+- interrupts: description of the interrupt line
+
+Example for OMAP4:
+
+usbhsohci: ohci@4a064800 {
+	compatible = "ti,ohci-omap3", "usb-ohci";
+	reg = <0x4a064800 0x400>;
+	interrupts = <0 76 0x4>;
+};