diff options
Diffstat (limited to 'Documentation/devicetree')
4 files changed, 152 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/hwlock/hwlock.txt b/Documentation/devicetree/bindings/hwlock/hwlock.txt new file mode 100644 index 0000000..085d1f5 --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/hwlock.txt @@ -0,0 +1,59 @@ +Generic hwlock bindings +======================= + +Generic bindings that are common to all the hwlock platform specific driver +implementations. + +Please also look through the individual platform specific hwlock binding +documentations for identifying any additional properties specific to that +platform. + +hwlock providers: +================= + +Required properties: +- #hwlock-cells: Specifies the number of cells needed to represent a + specific lock. + +hwlock users: +============= + +Consumers that require specific hwlock(s) should specify them using the +property "hwlocks", and an optional "hwlock-names" property. + +Required properties: +- hwlocks: List of phandle to a hwlock provider node and an + associated hwlock args specifier as indicated by + #hwlock-cells. The list can have just a single hwlock + or multiple hwlocks, with each hwlock represented by + a phandle and a corresponding args specifier. + +Optional properties: +- hwlock-names: List of hwlock name strings defined in the same order + as the hwlocks, with one name per hwlock. Consumers can + use the hwlock-names to match and get a specific hwlock. + + +1. Example of a node using a single specific hwlock: + +The following example has a node requesting a hwlock in the bank defined by +the node hwlock1. hwlock1 is a hwlock provider with an argument specifier +of length 1. + + node { + ... + hwlocks = <&hwlock1 2>; + ... + }; + +2. Example of a node using multiple specific hwlocks: + +The following example has a node requesting two hwlocks, a hwlock within +the hwlock device node 'hwlock1' with #hwlock-cells value of 1, and another +hwlock within the hwlock device node 'hwlock2' with #hwlock-cells value of 2. + + node { + ... + hwlocks = <&hwlock1 2>, <&hwlock2 0 3>; + ... + }; diff --git a/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt new file mode 100644 index 0000000..2c9804f --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/omap-hwspinlock.txt @@ -0,0 +1,26 @@ +OMAP4+ HwSpinlock Driver +======================== + +Required properties: +- compatible: Should be "ti,omap4-hwspinlock" for + OMAP44xx, OMAP54xx, AM33xx, AM43xx, DRA7xx SoCs +- reg: Contains the hwspinlock module register address space + (base address and length) +- ti,hwmods: Name of the hwmod associated with the hwspinlock device +- #hwlock-cells: Should be 1. The OMAP hwspinlock users will use a + 0-indexed relative hwlock number as the argument + specifier value for requesting a specific hwspinlock + within a hwspinlock bank. + +Please look at the generic hwlock binding for usage information for consumers, +"Documentation/devicetree/bindings/hwlock/hwlock.txt" + +Example: + +/* OMAP4 */ +hwspinlock: spinlock@4a0f6000 { + compatible = "ti,omap4-hwspinlock"; + reg = <0x4a0f6000 0x1000>; + ti,hwmods = "spinlock"; + #hwlock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt new file mode 100644 index 0000000..4563f52 --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/qcom-hwspinlock.txt @@ -0,0 +1,39 @@ +Qualcomm Hardware Mutex Block: + +The hardware block provides mutexes utilized between different processors on +the SoC as part of the communication protocol used by these processors. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,sfpb-mutex", + "qcom,tcsr-mutex" + +- syscon: + Usage: required + Value type: <prop-encoded-array> + Definition: one cell containing: + syscon phandle + offset of the hwmutex block within the syscon + stride of the hwmutex registers + +- #hwlock-cells: + Usage: required + Value type: <u32> + Definition: must be 1, the specified cell represent the lock id + (hwlock standard property, see hwlock.txt) + +Example: + + tcsr_mutex_block: syscon@fd484000 { + compatible = "syscon"; + reg = <0xfd484000 0x2000>; + }; + + hwlock@fd484000 { + compatible = "qcom,tcsr-mutex"; + syscon = <&tcsr_mutex_block 0 0x80>; + + #hwlock-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt new file mode 100644 index 0000000..9bb1240a6 --- /dev/null +++ b/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt @@ -0,0 +1,28 @@ +SIRF Hardware spinlock device Binding +----------------------------------------------- + +Required properties : +- compatible : shall contain only one of the following: + "sirf,hwspinlock" + +- reg : the register address of hwspinlock + +- #hwlock-cells : hwlock users only use the hwlock id to represent a specific + hwlock, so the number of cells should be <1> here. + +Please look at the generic hwlock binding for usage information for consumers, +"Documentation/devicetree/bindings/hwlock/hwlock.txt" + +Example of hwlock provider: + hwlock { + compatible = "sirf,hwspinlock"; + reg = <0x13240000 0x00010000>; + #hwlock-cells = <1>; + }; + +Example of hwlock users: + node { + ... + hwlocks = <&hwlock 2>; + ... + }; |
