diff options
Diffstat (limited to 'Documentation/devicetree')
48 files changed, 1539 insertions, 22 deletions
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 1196290..78530e6 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -20,6 +20,10 @@ TC/TCLIB Timer required properties: - interrupts: Should contain all interrupts for the TC block Note that you can specify several interrupt cells if the TC block has one interrupt per channel. +- clock-names: tuple listing input clock names. + Required elements: "t0_clk" + Optional elements: "t1_clk", "t2_clk" +- clocks: phandles to input clocks. Examples: @@ -28,6 +32,8 @@ One interrupt per TC block: compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <18 4>; + clocks = <&tcb0_clk>; + clock-names = "t0_clk"; }; One interrupt per TC channel in a TC block: @@ -35,6 +41,8 @@ One interrupt per TC channel in a TC block: compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; interrupts = <26 4 27 4 28 4>; + clocks = <&tcb1_clk>; + clock-names = "t0_clk"; }; RSTC Reset Controller required properties: diff --git a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt index 46f5c79..0f2f920 100644 --- a/Documentation/devicetree/bindings/clock/exynos5250-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5250-clock.txt @@ -159,6 +159,8 @@ clock which they consume. mixer 343 hdmi 344 g2d 345 + mdma0 346 + smmu_mdma0 347 [Clock Muxes] diff --git a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt index 7dab6a8..45414bb 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-palmas.txt +++ b/Documentation/devicetree/bindings/extcon/extcon-palmas.txt @@ -2,7 +2,11 @@ EXTCON FOR PALMAS/TWL CHIPS PALMAS USB COMPARATOR Required Properties: - - compatible : Should be "ti,palmas-usb" or "ti,twl6035-usb" + - compatible: should contain one of: + * "ti,palmas-usb-vid". + * "ti,twl6035-usb-vid". + * "ti,palmas-usb" (DEPRECATED - use "ti,palmas-usb-vid"). + * "ti,twl6035-usb" (DEPRECATED - use "ti,twl6035-usb-vid"). Optional Properties: - ti,wakeup : To enable the wakeup comparator in probe diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt index daa3017..3ddc7cc 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt @@ -38,12 +38,38 @@ Required device specific properties (only for SPI chips): removed. - spi-max-frequency = The maximum frequency this chip is able to handle -Example I2C: +Optional properties: +- #interrupt-cells : Should be two. + - first cell is the pin number + - second cell is used to specify flags. +- interrupt-controller: Marks the device node as a interrupt controller. +NOTE: The interrupt functionality is only supported for i2c versions of the +chips. The spi chips can also do the interrupts, but this is not supported by +the linux driver yet. + +Optional device specific properties: +- microchip,irq-mirror: Sets the mirror flag in the IOCON register. Devices + with two interrupt outputs (these are the devices ending with 17 and + those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and + IO 8-15 are bank 2. These chips have two different interrupt outputs: + One for bank 1 and another for bank 2. If irq-mirror is set, both + interrupts are generated regardless of the bank that an input change + occured on. If it is not set, the interrupt are only generated for the + bank they belong to. + On devices with only one interrupt output this property is useless. + +Example I2C (with interrupt): gpiom1: gpio@20 { compatible = "microchip,mcp23017"; gpio-controller; #gpio-cells = <2>; reg = <0x20>; + + interrupt-parent = <&gpio1>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells=<2>; + microchip,irq-mirror; }; Example SPI: diff --git a/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt b/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt new file mode 100644 index 0000000..f8e8f18 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/moxa,moxart-gpio.txt @@ -0,0 +1,19 @@ +MOXA ART GPIO Controller + +Required properties: + +- #gpio-cells : Should be 2, The first cell is the pin number, + the second cell is used to specify polarity: + 0 = active high + 1 = active low +- compatible : Must be "moxa,moxart-gpio" +- reg : Should contain registers location and length + +Example: + + gpio: gpio@98700000 { + gpio-controller; + #gpio-cells = <2>; + compatible = "moxa,moxart-gpio"; + reg = <0x98700000 0xC>; + }; diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 8655df9..f61cef7 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -2,10 +2,11 @@ Required Properties: - - compatible: should be one of the following. + - compatible: should contain one of the following. - "renesas,gpio-r8a7778": for R8A7778 (R-Mobile M1) compatible GPIO controller. - "renesas,gpio-r8a7779": for R8A7779 (R-Car H1) compatible GPIO controller. - "renesas,gpio-r8a7790": for R8A7790 (R-Car H2) compatible GPIO controller. + - "renesas,gpio-r8a7791": for R8A7791 (R-Car M2) compatible GPIO controller. - "renesas,gpio-rcar": for generic R-Car GPIO controller. - reg: Base address and length of each memory resource used by the GPIO diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt index b689a0d..4fade84 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt @@ -9,6 +9,7 @@ Required properties : - interrupts: interrupt number to the cpu. - #address-cells = <1>; - #size-cells = <0>; +- clocks: phandles to input clocks. Optional properties: - Child nodes conforming to i2c bus binding @@ -21,6 +22,7 @@ i2c0: i2c@fff84000 { interrupts = <12 4 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; 24c512@50 { compatible = "24c512"; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt new file mode 100644 index 0000000..34a3fb6 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -0,0 +1,50 @@ +* NXP PCA954x I2C bus switch + +Required Properties: + + - compatible: Must contain one of the following. + "nxp,pca9540", "nxp,pca9542", "nxp,pca9543", "nxp,pca9544", + "nxp,pca9545", "nxp,pca9546", "nxp,pca9547", "nxp,pca9548" + + - reg: The I2C address of the device. + + The following required properties are defined externally: + + - Standard I2C mux properties. See i2c-mux.txt in this directory. + - I2C child bus nodes. See i2c-mux.txt in this directory. + +Optional Properties: + + - reset-gpios: Reference to the GPIO connected to the reset input. + + +Example: + + i2c-switch@74 { + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + eeprom@54 { + compatible = "at,24c08"; + reg = <0x54>; + }; + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-riic.txt b/Documentation/devicetree/bindings/i2c/i2c-riic.txt new file mode 100644 index 0000000..0bcc471 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-riic.txt @@ -0,0 +1,29 @@ +Device tree configuration for Renesas RIIC driver + +Required properties: +- compatible : "renesas,riic-<soctype>". "renesas,riic-rz" as fallback +- reg : address start and address range size of device +- interrupts : 8 interrupts (TEI, RI, TI, SPI, STI, NAKI, ALI, TMOI) +- clock-frequency : frequency of bus clock in Hz +- #address-cells : should be <1> +- #size-cells : should be <0> + +Pinctrl properties might be needed, too. See there. + +Example: + + i2c0: i2c@fcfee000 { + compatible = "renesas,riic-r7s72100", "renesas,riic-rz"; + reg = <0xfcfee000 0x44>; + interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>, + <0 158 IRQ_TYPE_EDGE_RISING>, + <0 159 IRQ_TYPE_EDGE_RISING>, + <0 160 IRQ_TYPE_LEVEL_HIGH>, + <0 161 IRQ_TYPE_LEVEL_HIGH>, + <0 162 IRQ_TYPE_LEVEL_HIGH>, + <0 163 IRQ_TYPE_LEVEL_HIGH>, + <0 164 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <100000>; + #address-cells = <1>; + #size-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt index 296eb45..278de8e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-s3c2410.txt @@ -10,6 +10,8 @@ Required properties: inside HDMIPHY block found on several samsung SoCs (d) "samsung, exynos5440-i2c", for s3c2440-like i2c used on EXYNOS5440 which does not need GPIO configuration. + (e) "samsung, exynos5-sata-phy-i2c", for s3c2440-like i2c used as + a host to SATA PHY controller on an internal bus. - reg: physical base address of the controller and length of memory mapped region. - interrupts: interrupt number to the cpu. diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index b1cb341..c65f71c 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -16,6 +16,7 @@ adt7461 +/-1C TDM Extended Temp Range I.C at,24c08 i2c serial eeprom (24cxx) atmel,24c02 i2c serial eeprom (24cxx) atmel,at97sc3204t i2c trusted platform module (TPM) +capella,cm32181 CM32181: Ambient Light Sensor catalyst,24c32 i2c serial eeprom dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock dallas,ds1338 I2C RTC with 56-Byte NV RAM diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.txt b/Documentation/devicetree/bindings/iio/humidity/dht11.txt new file mode 100644 index 0000000..ecc24c19 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/humidity/dht11.txt @@ -0,0 +1,14 @@ +* DHT11 humidity/temperature sensor (and compatibles like DHT22) + +Required properties: + - compatible: Should be "dht11" + - gpios: Should specify the GPIO connected to the sensor's data + line, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. + +Example: + +humidity_sensor { + compatible = "dht11"; + gpios = <&gpio0 6 0>; +} diff --git a/Documentation/devicetree/bindings/iio/light/tsl2563.txt b/Documentation/devicetree/bindings/iio/light/tsl2563.txt new file mode 100644 index 0000000..f91e809 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/tsl2563.txt @@ -0,0 +1,19 @@ +* AMS TAOS TSL2563 ambient light sensor + +Required properties: + + - compatible : should be "amstaos,tsl2563" + - reg : the I2C address of the sensor + +Optional properties: + + - amstaos,cover-comp-gain : integer used as multiplier for gain + compensation (default = 1) + +Example: + +tsl2563@29 { + compatible = "amstaos,tsl2563"; + reg = <0x29>; + amstaos,cover-comp-gain = <16>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt new file mode 100644 index 0000000..90d5f34 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt @@ -0,0 +1,17 @@ +* Honeywell HMC5843 magnetometer sensor + +Required properties: + + - compatible : should be "honeywell,hmc5843" + - reg : the I2C address of the magnetometer - typically 0x1e + +Optional properties: + + - gpios : should be device tree identifier of the magnetometer DRDY pin + +Example: + +hmc5843@1e { + compatible = "honeywell,hmc5843" + reg = <0x1e>; +}; diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt index a45ae08..60960b2 100644 --- a/Documentation/devicetree/bindings/misc/atmel-ssc.txt +++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt @@ -6,6 +6,9 @@ Required properties: - atmel,at91sam9g45-ssc: support dma transfer - reg: Should contain SSC registers location and length - interrupts: Should contain SSC interrupt +- clock-names: tuple listing input clock names. + Required elements: "pclk" +- clocks: phandles to input clocks. Required properties for devices compatible with "atmel,at91sam9g45-ssc": @@ -20,6 +23,8 @@ ssc0: ssc@fffbc000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; }; - DMA transfer: diff --git a/Documentation/devicetree/bindings/misc/bmp085.txt b/Documentation/devicetree/bindings/misc/bmp085.txt index 91dfda2..d7a6deb 100644 --- a/Documentation/devicetree/bindings/misc/bmp085.txt +++ b/Documentation/devicetree/bindings/misc/bmp085.txt @@ -8,6 +8,8 @@ Optional properties: - temp-measurement-period: temperature measurement period (milliseconds) - default-oversampling: default oversampling value to be used at startup, value range is 0-3 with rising sensitivity. +- interrupt-parent: should be the phandle for the interrupt controller +- interrupts: interrupt mapping for IRQ Example: @@ -17,4 +19,6 @@ pressure@77 { chip-id = <10>; temp-measurement-period = <100>; default-oversampling = <2>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; }; diff --git a/Documentation/devicetree/bindings/phy/bcm-phy.txt b/Documentation/devicetree/bindings/phy/bcm-phy.txt new file mode 100644 index 0000000..3dc8b3d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/bcm-phy.txt @@ -0,0 +1,15 @@ +BROADCOM KONA USB2 PHY + +Required properties: + - compatible: brcm,kona-usb2-phy + - reg: offset and length of the PHY registers + - #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Example: + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt new file mode 100644 index 0000000..9e9e9ef --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,capri-pinctrl.txt @@ -0,0 +1,461 @@ +Broadcom Capri Pin Controller + +This is a pin controller for the Broadcom BCM281xx SoC family, which includes +BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. + +=== Pin Controller Node === + +Required Properties: + +- compatible: Must be "brcm,capri-pinctrl". +- reg: Base address of the PAD Controller register block and the size + of the block. + +For example, the following is the bare minimum node: + + pinctrl@35004800 { + compatible = "brcm,capri-pinctrl"; + reg = <0x35004800 0x430>; + }; + +As a pin controller device, in addition to the required properties, this node +should also contain the pin configuration nodes that client devices reference, +if any. + +=== Pin Configuration Node === + +Each pin configuration node is a sub-node of the pin controller node and is a +container of an arbitrary number of subnodes, called pin group nodes in this +document. + +Please refer to the pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the definition of a +"pin configuration node". + +=== Pin Group Node === + +A pin group node specifies the desired pin mux and/or pin configuration for an +arbitrary number of pins. The name of the pin group node is optional and not +used. + +A pin group node only affects the properties specified in the node, and has no +effect on any properties that are omitted. + +The pin group node accepts a subset of the generic pin config properties. For +details generic pin config properties, please refer to pinctrl-bindings.txt +and <include/linux/pinctrl/pinconfig-generic.h>. + +Each pin controlled by this pin controller belong to one of three types: +Standard, I2C, and HDMI. Each type accepts a different set of pin config +properties. A list of pins and their types is provided below. + +Required Properties (applicable to all pins): + +- pins: Multiple strings. Specifies the name(s) of one or more pins to + be configured by this node. + +Optional Properties (for standard pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- input-schmitt-enable: No arguments. Enable schmitt-trigger mode. +- input-schmitt-disable: No arguments. Disable schmitt-trigger mode. +- bias-pull-up: No arguments. Pull up on pin. +- bias-pull-down: No arguments. Pull down on pin. +- bias-disable: No arguments. Disable pin bias. +- slew-rate: Integer. Meaning depends on configured pin mux: + *_SCL or *_SDA: + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode + IC_DM or IC_DP: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) +- drive-strength: Integer. Drive strength in mA. Valid values are + 2, 4, 6, 8, 10, 12, 14, 16 mA. + +Optional Properties (for I2C pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- bias-pull-up: Integer. Pull up strength in Ohm. There are 3 + pull-up resisitors (1.2k, 1.8k, 2.7k) available + in parallel for I2C pins, so the valid values + are: 568, 720, 831, 1080, 1200, 1800, 2700 Ohm. +- bias-disable: No arguments. Disable pin bias. +- slew-rate: Integer. Meaning depends on configured pin mux: + *_SCL or *_SDA: + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode + IC_DM or IC_DP: + 0: normal slew rate + 1: fast slew rate + Otherwise: + 0: fast slew rate + 1: normal slew rate +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) + +Optional Properties (for HDMI pins): + +- function: String. Specifies the pin mux selection. Values + must be one of: "alt1", "alt2", "alt3", "alt4" +- slew-rate: Integer. Controls slew rate. + 0: Standard(100kbps)& Fast(400kbps) mode + 1: Highspeed (3.4Mbps) mode +- input-enable: No arguements. Enable input (does not affect + output.) +- input-disable: No arguements. Disable input (does not affect + output.) + +Example: +// pin controller node +pinctrl@35004800 { + compatible = "brcm,capri-pinctrl"; + reg = <0x35004800 0x430>; + + // pin configuration node + dev_a_default: dev_a_active { + //group node defining 1 standard pin + grp_1 { + pins = "std_pin1"; + function = "alt1"; + input-schmitt-enable; + bias-disable; + slew-rate = <1>; + drive-strength = <4>; + }; + + // group node defining 2 I2C pins + grp_2 { + pins = "i2c_pin1", "i2c_pin2"; + function = "alt2"; + bias-pull-up = <720>; + input-enable; + }; + + // group node defining 2 HDMI pins + grp_3 { + pins = "hdmi_pin1", "hdmi_pin2"; + function = "alt3"; + slew-rate = <1>; + }; + + // other pin group nodes + ... + }; + + // other pin configuration nodes + ... +}; + +In the example above, "dev_a_active" is a pin configuration node with a number +of sub-nodes. In the pin group node "grp_1", one pin, "std_pin1", is defined in +the "pins" property. Thus, the remaining properties in the "grp_1" node applies +only to this pin, including the following settings: + - setting pinmux to "alt1" + - enabling schmitt-trigger (hystersis) mode + - disabling pin bias + - setting the slew-rate to 1 + - setting the drive strength to 4 mA +Note that neither "input-enable" nor "input-disable" was specified - the pinctrl +subsystem will therefore leave this property unchanged from whatever state it +was in before applying these changes. + +The "pins" property in the pin group node "grp_2" specifies two pins - +"i2c_pin1" and "i2c_pin2"; the remaining properties in this pin group node, +therefore, applies to both of these pins. The properties include: + - setting pinmux to "alt2" + - setting pull-up resistance to 720 Ohm (ie. enabling 1.2k and 1.8k resistors + in parallel) + - enabling both pins' input +"slew-rate" is not specified in this pin group node, so the slew-rate for these +pins are left as-is. + +Finally, "grp_3" defines two HDMI pins. The following properties are applied to +both pins: + - setting pinmux to "alt3" + - setting slew-rate to 1; for HDMI pins, this corresponds to the 3.4 Mbps + Highspeed mode +The input is neither enabled or disabled, and is left untouched. + +=== Pin Names and Type === + +The following are valid pin names and their pin types: + + "adcsync", Standard + "bat_rm", Standard + "bsc1_scl", I2C + "bsc1_sda", I2C + "bsc2_scl", I2C + "bsc2_sda", I2C + "classgpwr", Standard + "clk_cx8", Standard + "clkout_0", Standard + "clkout_1", Standard + "clkout_2", Standard + "clkout_3", Standard + "clkreq_in_0", Standard + "clkreq_in_1", Standard + "cws_sys_req1", Standard + "cws_sys_req2", Standard + "cws_sys_req3", Standard + "digmic1_clk", Standard + "digmic1_dq", Standard + "digmic2_clk", Standard + "digmic2_dq", Standard + "gpen13", Standard + "gpen14", Standard + "gpen15", Standard + "gpio00", Standard + "gpio01", Standard + "gpio02", Standard + "gpio03", Standard + "gpio04", Standard + "gpio05", Standard + "gpio06", Standard + "gpio07", Standard + "gpio08", Standard + "gpio09", Standard + "gpio10", Standard + "gpio11", Standard + "gpio12", Standard + "gpio13", Standard + "gpio14", Standard + "gps_pablank", Standard + "gps_tmark", Standard + "hdmi_scl", HDMI + "hdmi_sda", HDMI + "ic_dm", Standard + "ic_dp", Standard + "kp_col_ip_0", Standard + "kp_col_ip_1", Standard + "kp_col_ip_2", Standard + "kp_col_ip_3", Standard + "kp_row_op_0", Standard + "kp_row_op_1", Standard + "kp_row_op_2", Standard + "kp_row_op_3", Standard + "lcd_b_0", Standard + "lcd_b_1", Standard + "lcd_b_2", Standard + "lcd_b_3", Standard + "lcd_b_4", Standard + "lcd_b_5", Standard + "lcd_b_6", Standard + "lcd_b_7", Standard + "lcd_g_0", Standard + "lcd_g_1", Standard + "lcd_g_2", Standard + "lcd_g_3", Standard + "lcd_g_4", Standard + "lcd_g_5", Standard + "lcd_g_6", Standard + "lcd_g_7", Standard + "lcd_hsync", Standard + "lcd_oe", Standard + "lcd_pclk", Standard + "lcd_r_0", Standard + "lcd_r_1", Standard + "lcd_r_2", Standard + "lcd_r_3", Standard + "lcd_r_4", Standard + "lcd_r_5", Standard + "lcd_r_6", Standard + "lcd_r_7", Standard + "lcd_vsync", Standard + "mdmgpio0", Standard + "mdmgpio1", Standard + "mdmgpio2", Standard + "mdmgpio3", Standard + "mdmgpio4", Standard + "mdmgpio5", Standard + "mdmgpio6", Standard + "mdmgpio7", Standard + "mdmgpio8", Standard + "mphi_data_0", Standard + "mphi_data_1", Standard + "mphi_data_2", Standard + "mphi_data_3", Standard + "mphi_data_4", Standard + "mphi_data_5", Standard + "mphi_data_6", Standard + "mphi_data_7", Standard + "mphi_data_8", Standard + "mphi_data_9", Standard + "mphi_data_10", Standard + "mphi_data_11", Standard + "mphi_data_12", Standard + "mphi_data_13", Standard + "mphi_data_14", Standard + "mphi_data_15", Standard + "mphi_ha0", Standard + "mphi_hat0", Standard + "mphi_hat1", Standard + "mphi_hce0_n", Standard + "mphi_hce1_n", Standard + "mphi_hrd_n", Standard + "mphi_hwr_n", Standard + "mphi_run0", Standard + "mphi_run1", Standard + "mtx_scan_clk", Standard + "mtx_scan_data", Standard + "nand_ad_0", Standard + "nand_ad_1", Standard + "nand_ad_2", Standard + "nand_ad_3", Standard + "nand_ad_4", Standard + "nand_ad_5", Standard + "nand_ad_6", Standard + "nand_ad_7", Standard + "nand_ale", Standard + "nand_cen_0", Standard + "nand_cen_1", Standard + "nand_cle", Standard + "nand_oen", Standard + "nand_rdy_0", Standard + "nand_rdy_1", Standard + "nand_wen", Standard + "nand_wp", Standard + "pc1", Standard + "pc2", Standard + "pmu_int", Standard + "pmu_scl", I2C + "pmu_sda", I2C + "rfst2g_mtsloten3g", Standard + "rgmii_0_rx_ctl", Standard + "rgmii_0_rxc", Standard + "rgmii_0_rxd_0", Standard + "rgmii_0_rxd_1", Standard + "rgmii_0_rxd_2", Standard + "rgmii_0_rxd_3", Standard + "rgmii_0_tx_ctl", Standard + "rgmii_0_txc", Standard + "rgmii_0_txd_0", Standard + "rgmii_0_txd_1", Standard + "rgmii_0_txd_2", Standard + "rgmii_0_txd_3", Standard + "rgmii_1_rx_ctl", Standard + "rgmii_1_rxc", Standard + "rgmii_1_rxd_0", Standard + "rgmii_1_rxd_1", Standard + "rgmii_1_rxd_2", Standard + "rgmii_1_rxd_3", Standard + "rgmii_1_tx_ctl", Standard + "rgmii_1_txc", Standard + "rgmii_1_txd_0", Standard + "rgmii_1_txd_1", Standard + "rgmii_1_txd_2", Standard + "rgmii_1_txd_3", Standard + "rgmii_gpio_0", Standard + "rgmii_gpio_1", Standard + "rgmii_gpio_2", Standard + "rgmii_gpio_3", Standard + "rtxdata2g_txdata3g1", Standard + "rtxen2g_txdata3g2", Standard + "rxdata3g0", Standard + "rxdata3g1", Standard + "rxdata3g2", Standard + "sdio1_clk", Standard + "sdio1_cmd", Standard + "sdio1_data_0", Standard + "sdio1_data_1", Standard + "sdio1_data_2", Standard + "sdio1_data_3", Standard + "sdio4_clk", Standard + "sdio4_cmd", Standard + "sdio4_data_0", Standard + "sdio4_data_1", Standard + "sdio4_data_2", Standard + "sdio4_data_3", Standard + "sim_clk", Standard + "sim_data", Standard + "sim_det", Standard + "sim_resetn", Standard + "sim2_clk", Standard + "sim2_data", Standard + "sim2_det", Standard + "sim2_resetn", Standard + "sri_c", Standard + "sri_d", Standard + "sri_e", Standard + "ssp_extclk", Standard + "ssp0_clk", Standard + "ssp0_fs", Standard + "ssp0_rxd", Standard + "ssp0_txd", Standard + "ssp2_clk", Standard + "ssp2_fs_0", Standard + "ssp2_fs_1", Standard + "ssp2_fs_2", Standard + "ssp2_fs_3", Standard + "ssp2_rxd_0", Standard + "ssp2_rxd_1", Standard + "ssp2_txd_0", Standard + "ssp2_txd_1", Standard + "ssp3_clk", Standard + "ssp3_fs", Standard + "ssp3_rxd", Standard + "ssp3_txd", Standard + "ssp4_clk", Standard + "ssp4_fs", Standard + "ssp4_rxd", Standard + "ssp4_txd", Standard + "ssp5_clk", Standard + "ssp5_fs", Standard + "ssp5_rxd", Standard + "ssp5_txd", Standard + "ssp6_clk", Standard + "ssp6_fs", Standard + "ssp6_rxd", Standard + "ssp6_txd", Standard + "stat_1", Standard + "stat_2", Standard + "sysclken", Standard + "traceclk", Standard + "tracedt00", Standard + "tracedt01", Standard + "tracedt02", Standard + "tracedt03", Standard + "tracedt04", Standard + "tracedt05", Standard + "tracedt06", Standard + "tracedt07", Standard + "tracedt08", Standard + "tracedt09", Standard + "tracedt10", Standard + "tracedt11", Standard + "tracedt12", Standard + "tracedt13", Standard + "tracedt14", Standard + "tracedt15", Standard + "txdata3g0", Standard + "txpwrind", Standard + "uartb1_ucts", Standard + "uartb1_urts", Standard + "uartb1_urxd", Standard + "uartb1_utxd", Standard + "uartb2_urxd", Standard + "uartb2_utxd", Standard + "uartb3_ucts", Standard + "uartb3_urts", Standard + "uartb3_urxd", Standard + "uartb3_utxd", Standard + "uartb4_ucts", Standard + "uartb4_urts", Standard + "uartb4_urxd", Standard + "uartb4_utxd", Standard + "vc_cam1_scl", I2C + "vc_cam1_sda", I2C + "vc_cam2_scl", I2C + "vc_cam2_sda", I2C + "vc_cam3_scl", I2C + "vc_cam3_sda", I2C diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt new file mode 100644 index 0000000..fd653bd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx25-pinctrl.txt @@ -0,0 +1,23 @@ +* Freescale IMX25 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +CONFIG bits definition: +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE_CMOS (0 << 3) +PAD_CTL_ODE_OPENDRAIN (1 << 3) +PAD_CTL_DSE_NOMINAL (0 << 1) +PAD_CTL_DSE_HIGH (1 << 1) +PAD_CTL_DSE_MAX (2 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +Refer to imx25-pinfunc.h in device tree source folder for all available +imx25 PIN_FUNC_ID. diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt index 353eca0..d1706ea 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx27-pinctrl.txt @@ -52,12 +52,25 @@ Required properties for pin configuration node: CONFIG can be 0 or 1, meaning Pullup disable/enable. +The iomux controller has gpio child nodes which are embedded in the iomux +control registers. They have to be defined as child nodes of the iomux device +node. If gpio subnodes are defined "#address-cells", "#size-cells" and "ranges" +properties for the iomux device node are required. Example: iomuxc: iomuxc@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + ... + }; + + ... uart { pinctrl_uart1: uart-1 { @@ -83,6 +96,15 @@ The above example using macros: iomuxc: iomuxc@10015000 { compatible = "fsl,imx27-iomuxc"; reg = <0x10015000 0x600>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio1: gpio@10015000 { + ... + }; + + ... uart { pinctrl_uart1: uart-1 { diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt new file mode 100644 index 0000000..6464bf7 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt @@ -0,0 +1,144 @@ +NVIDIA Tegra124 pinmux controller + +The Tegra124 pinctrl binding is very similar to the Tegra20 and Tegra30 +pinctrl binding, as described in nvidia,tegra20-pinmux.txt and +nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as +a baseline, and only documents the differences between the two bindings. + +Required properties: +- compatible: "nvidia,tegra124-pinmux" +- reg: Should contain a list of base address and size pairs for: + -- first entry - the drive strength and pad control registers. + -- second entry - the pinmux registers + +Tegra124 adds the following optional properties for pin configuration subnodes. +The macros for options are defined in the + include/dt-binding/pinctrl/pinctrl-tegra.h. +- nvidia,enable-input: Integer. Enable the pin's input path. + enable :TEGRA_PIN_ENABLE0 and + disable or output only: TEGRA_PIN_DISABLE. +- nvidia,open-drain: Integer. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,lock: Integer. Lock the pin configuration against further changes + until reset. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,io-reset: Integer. Reset the IO path. + enable: TEGRA_PIN_ENABLE. + disable: TEGRA_PIN_DISABLE. +- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. + normal: TEGRA_PIN_DISABLE + high: TEGRA_PIN_ENABLE + +Please refer the Tegra TRM for complete details regarding which groups +support which functionality. + +Valid values for pin and group names are: + + per-pin mux groups: + + These all support nvidia,function, nvidia,tristate, nvidia,pull, + nvidia,enable-input. Some support nvidia,lock nvidia,open-drain, + nvidia,io-reset and nvidia,rcv-sel. + + ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, + ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, + ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, + dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, + sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, + ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, + uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_scl_pc4, + gen1_i2c_sda_pc5, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, + dap4_sclk_pp7, clk3_out_pee0, clk3_req_pee1, pc7, pi5, pi7, pk0, pk1, + pj0, pj2, pk3, pk4, pk2, pi3, pi6, pg0, pg1, pg2, pg3, pg4, pg5, pg6, + pg7, ph0, ph1, ph2, ph3, ph4, ph5, ph6, ph7, pj7, pb0, pb1, pk7, pi0, + pi1, pi2, pi4, gen2_i2c_scl_pt5, gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, + sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, + sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, + sdmmc4_dat7_paa7, cam_mclk_pcc0, pcc1, pbb0, cam_i2c_scl_pbb1, + cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, pbb7, pcc2, jtag_rtck, + pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, kb_row2_pr2, + kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, kb_row7_pr7, + kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_row11_ps3, kb_row12_ps4, + kb_row13_ps5, kb_row14_ps6, kb_row15_ps7, kb_col0_pq0, kb_col1_pq1, + kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, kb_col6_pq6, + kb_col7_pq7, clk_32k_out_pa0, core_pwr_req, cpu_pwr_req, pwr_int_n, + clk_32k_in, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, + dap1_sclk_pn3, dap_mclk1_req_pee2, dap_mclk1_pw4, spdif_in_pk6, + spdif_out_pk5, dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, + dvfs_pwm_px0, gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, + gpio_x4_aud_px4, gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, + sdmmc3_clk_pa6, sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, + sdmmc3_dat2_pb5, sdmmc3_dat3_pb4, pex_l0_rst_n_pdd1, + pex_l0_clkreq_n_pdd2, pex_wake_n_pdd3, pex_l1_rst_n_pdd5, + pex_l1_clkreq_n_pdd6, hdmi_cec_pee3, sdmmc1_wp_n_pv3, + sdmmc3_cd_n_pv2, gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, + usb_vbus_en1_pn5, sdmmc3_clk_lb_out_pee4, sdmmc3_clk_lb_in_pee5, + gmi_clk_lb, reset_out_n, kb_row16_pt0, kb_row17_pt1, usb_vbus_en2_pff1, + pff2, dp_hpd_pff0, + + drive groups: + + These all support nvidia,pull-down-strength, nvidia,pull-up-strength, + nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all + support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode + and nvidia,drive-type. + + ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, + dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, + gmh, owr, uda, gpv, dev3, cec, usb_vbus_en, ao3, ao0, hv0, sdio4, ao4. + +Valid values for nvidia,functions are: + + blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya, + displaya_alt, displayb, dtv, extperiph1, extperiph2, extperiph3, + gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr, i2s0, + i2s1, i2s2, i2s3, i2s4, irda, kbc, owr, pmi, pwm0, pwm1, pwm2, pwm3, + pwron, reset_out_n, rsvd1, rsvd2, rsvd3, rsvd4, sdmmc1, sdmmc2, sdmmc3, + sdmmc4, soc, spdif, spi1, spi2, spi3, spi4, spi5, spi6, trace, uarta, + uartb, uartc, uartd, ulpi, usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, + vi, vi_alt1, vi_alt3, vimclk2, vimclk2_alt, sata, ccla, pe0, pe, pe1, + dp, rtck, sys, clk tmds. + +Example: + + pinmux: pinmux { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x70000868 0x164 /* Pad control registers */ + 0x70003000 0x434>; /* PinMux registers */ + }; + +Example pinmux entries: + + pinctrl { + sdmmc4_default: pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + }; + + sdhci@78000400 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc4_default>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 1958ca9..4414163 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -151,6 +151,8 @@ drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source drive-strength - sink or source at most X mA +input-enable - enable input on pin (no effect on output) +input-disable - disable input on pin (no effect on output) input-schmitt-enable - enable schmitt-trigger mode input-schmitt-disable - disable schmitt-trigger mode input-debounce - debounce mode with debound time X @@ -158,6 +160,7 @@ low-power-enable - enable low power mode low-power-disable - disable low power mode output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level +slew-rate - set the slew rate Some of the generic properties take arguments. For those that do, the arguments are described below. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index 7069a0b..bc0dfdf 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -98,7 +98,7 @@ below for more information. In case when one register changes more than one pin's mux the pinctrl-single,bits need to be used which takes three parameters: - pinctrl-single,bits = <0xdc 0x18, 0xff>; + pinctrl-single,bits = <0xdc 0x18 0xff>; Where 0xdc is the offset from the pinctrl register base address for the device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt new file mode 100644 index 0000000..4c352be --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt @@ -0,0 +1,92 @@ +Qualcomm MSM8974 TLMM block + +Required properties: +- compatible: "qcom,msm8x74-pinctrl" +- reg: Should be the base address and length of the TLMM block. +- interrupts: Should be the parent IRQ of the TLMM block. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be two. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. + The first cell is the gpio pin number and the + second cell is used for optional parameters. + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Qualcomm's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + pins, function, bias-disable, bias-pull-down, bias-pull,up, drive-strength. + +Non-empty subnodes must specify the 'pins' property. +Note that not all properties are valid for all pins. + + +Valid values for qcom,pins are: + gpio0-gpio145 + Supports mux, bias and drive-strength + + sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data + Supports bias and drive-strength + +Valid values for qcom,function are: + blsp_i2c2, blsp_i2c6, blsp_i2c11, blsp_spi1, blsp_uart2, blsp_uart8, slimbus + + (Note that this is not yet the complete list of functions) + + + +Example: + + msmgpio: pinctrl@fd510000 { + compatible = "qcom,msm8974-pinctrl"; + reg = <0xfd510000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 208 0>; + + pinctrl-names = "default"; + pinctrl-0 = <&uart2_default>; + + uart2_default: uart2_default { + mux { + qcom,pins = "gpio4", "gpio5"; + qcom,function = "blsp_uart2"; + }; + + tx { + qcom,pins = "gpio4"; + drive-strength = <4>; + bias-disable; + }; + + rx { + qcom,pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index d5dac7b..35d2e1f 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -26,6 +26,11 @@ Optional properties: - #gpio-range-cells: Mandatory when the PFC doesn't handle GPIO, forbidden otherwise. Should be 3. + - interrupts-extended: Specify the interrupts associated with external + IRQ pins. This property is mandatory when the PFC handles GPIOs and + forbidden otherwise. When specified, it must contain one interrupt per + external IRQ, sorted by external IRQ number. + The PFC node also acts as a container for pin configuration nodes. Please refer to pinctrl-bindings.txt in this directory for the definition of the term "pin configuration node" and for the common pinctrl bindings used by client devices. @@ -103,6 +108,15 @@ Example 1: SH73A0 (SH-Mobile AG5) pin controller node <0xe605801c 0x1c>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, + <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, + <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, + <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, + <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, + <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, + <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, + <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; }; Example 2: A GPIO LED node that references a GPIO diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index 2191dcb..9c5d19a 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -6,6 +6,9 @@ Required properties: additional mode or an USART new feature. - reg: Should contain registers location and length - interrupts: Should contain interrupt +- clock-names: tuple listing input clock names. + Required elements: "usart" +- clocks: phandles to input clocks. Optional properties: - atmel,use-dma-rx: use of PDC or DMA for receiving data @@ -26,6 +29,8 @@ Example: compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x4000>; interrupts = <7>; + clocks = <&usart0_clk>; + clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; }; @@ -35,6 +40,8 @@ Example: compatible = "atmel,at91sam9260-usart"; reg = <0xf001c000 0x100>; interrupts = <12 4 5>; + clocks = <&usart0_clk>; + clock-names = "usart"; atmel,use-dma-rx; atmel,use-dma-tx; dmas = <&dma0 2 0x3>, diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt new file mode 100644 index 0000000..12f3cf8 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt @@ -0,0 +1,28 @@ +* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART) + +Required properties: +- compatible: Should be "cirrus,clps711x-uart". +- reg: Address and length of the register set for the device. +- interrupts: Should contain UART TX and RX interrupt. +- clocks: Should contain UART core clock number. +- syscon: Phandle to SYSCON node, which contain UART control bits. + +Optional properties: +- uart-use-ms: Indicate the UART has modem signal (DCD, DSR, CTS). + +Note: Each UART port should have an alias correctly numbered +in "aliases" node. + +Example: + aliases { + serial0 = &uart1; + }; + + uart1: uart@80000480 { + compatible = "cirrus,clps711x-uart"; + reg = <0x80000480 0x80>; + interrupts = <12 13>; + clocks = <&clks 11>; + syscon = <&syscon1>; + uart-use-ms; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt new file mode 100644 index 0000000..5875ca4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,axi-i2s.txt @@ -0,0 +1,31 @@ +ADI AXI-I2S controller + +Required properties: + - compatible : Must be "adi,axi-i2s-1.00.a" + - reg : Must contain I2S core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + The controller expects two clocks, the clock used for the AXI interface and + the clock used as the sampling rate reference clock sample. + - clock-names : "axi" for the clock to the AXI interface, "ref" for the sample + rate reference clock. + - dmas: Pairs of phandle and specifier for the DMA channels that are used by + the core. The core expects two dma channels, one for transmit and one for + receive. + - dma-names : "tx" for the transmit channel, "rx" for the receive channel. + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + + i2s: i2s@0x77600000 { + compatible = "adi,axi-i2s-1.00.a"; + reg = <0x77600000 0x1000>; + clocks = <&clk 15>, <&audio_clock>; + clock-names = "axi", "ref"; + dmas = <&ps7_dma 0>, <&ps7_dma 1>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt new file mode 100644 index 0000000..46f3449 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,axi-spdif-tx.txt @@ -0,0 +1,30 @@ +ADI AXI-SPDIF controller + +Required properties: + - compatible : Must be "adi,axi-spdif-1.00.a" + - reg : Must contain SPDIF core's registers location and length + - clocks : Pairs of phandle and specifier referencing the controller's clocks. + The controller expects two clocks, the clock used for the AXI interface and + the clock used as the sampling rate reference clock sample. + - clock-names: "axi" for the clock to the AXI interface, "ref" for the sample + rate reference clock. + - dmas: Pairs of phandle and specifier for the DMA channel that is used by + the core. The core expects one dma channel for transmit. + - dma-names : Must be "tx" + +For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties +please check: + * resource-names.txt + * clock/clock-bindings.txt + * dma/dma.txt + +Example: + + spdif: spdif@0x77400000 { + compatible = "adi,axi-spdif-tx-1.00.a"; + reg = <0x77600000 0x1000>; + clocks = <&clk 15>, <&audio_clock>; + clock-names = "axi", "ref"; + dmas = <&ps7_dma 0>; + dma-names = "tx"; + }; diff --git a/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt b/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt new file mode 100644 index 0000000..65783de --- /dev/null +++ b/Documentation/devicetree/bindings/sound/bcm2835-i2s.txt @@ -0,0 +1,25 @@ +* Broadcom BCM2835 SoC I2S/PCM module + +Required properties: +- compatible: "brcm,bcm2835-i2s" +- reg: A list of base address and size entries: + * The first entry should cover the PCM registers + * The second entry should cover the PCM clock registers +- dmas: List of DMA controller phandle and DMA request line ordered pairs. +- dma-names: Identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. + + One of the DMA channels will be responsible for transmission (should be + named "tx") and one for reception (should be named "rx"). + +Example: + +bcm2835_i2s: i2s@7e203000 { + compatible = "brcm,bcm2835-i2s"; + reg = <0x7e203000 0x20>, + <0x7e101098 0x02>; + + dmas = <&dma 2>, + <&dma 3>; + dma-names = "tx", "rx"; +}; diff --git a/Documentation/devicetree/bindings/sound/cs42l52.txt b/Documentation/devicetree/bindings/sound/cs42l52.txt new file mode 100644 index 0000000..bc03c93 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs42l52.txt @@ -0,0 +1,46 @@ +CS42L52 audio CODEC + +Required properties: + + - compatible : "cirrus,cs42l52" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - cirrus,reset-gpio : GPIO controller's phandle and the number + of the GPIO used to reset the codec. + + - cirrus,chgfreq-divisor : Values used to set the Charge Pump Frequency. + Allowable values of 0x00 through 0x0F. These are raw values written to the + register, not the actual frequency. The frequency is determined by the following. + Frequency = (64xFs)/(N+2) + N = chgfreq_val + Fs = Sample Rate (variable) + + - cirrus,mica-differential-cfg : boolean, If present, then the MICA input is configured + as a differential input. If not present then the MICA input is configured as + Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input. + + - cirrus,micb-differential-cfg : boolean, If present, then the MICB input is configured + as a differential input. If not present then the MICB input is configured as + Single-ended input. Single-ended mode allows for MIC1 or MIC2 muxing for input. + + - cirrus,micbias-lvl: Set the output voltage level on the MICBIAS Pin + 0 = 0.5 x VA + 1 = 0.6 x VA + 2 = 0.7 x VA + 3 = 0.8 x VA + 4 = 0.83 x VA + 5 = 0.91 x VA + +Example: + +codec: codec@4a { + compatible = "cirrus,cs42l52"; + reg = <0x4a>; + reset-gpio = <&gpio 10 0>; + cirrus,chgfreq-divisor = <0x05>; + cirrus.mica-differential-cfg; + cirrus,micbias-lvl = <5>; +}; diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt index ed785b3..569b26c4 100644 --- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -4,7 +4,8 @@ Required properties: - compatible : "ti,dm646x-mcasp-audio" : for DM646x platforms "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms - "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, TI81xx) + "ti,am33xx-mcasp-audio" : for AM33xx platforms (AM33xx, AM43xx, TI81xx) + "ti,dra7-mcasp-audio" : for DRA7xx platforms - reg : Should contain reg specifiers for the entries in the reg-names property. - reg-names : Should contain: @@ -36,7 +37,8 @@ Optional properties: - pinctrl-0: Should specify pin control group used for this controller. - pinctrl-names: Should contain only one value - "default", for more details please refer to pinctrl-bindings.txt - +- fck_parent : Should contain a valid clock name which will be used as parent + for the McASP fck Example: diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt new file mode 100644 index 0000000..d7b99fa --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -0,0 +1,50 @@ +Freescale Enhanced Serial Audio Interface (ESAI) Controller + +The Enhanced Serial Audio Interface (ESAI) provides a full-duplex serial port +for serial communication with a variety of serial devices, including industry +standard codecs, Sony/Phillips Digital Interface (S/PDIF) transceivers, and +other DSPs. It has up to six transmitters and four receivers. + +Required properties: + + - compatible : Compatible list, must contain "fsl,imx35-esai". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Two dmas have to be defined, "tx" and "rx". + + - clocks: Contains an entry for each entry in clock-names. + + - clock-names : Includes the following entries: + "core" The core clock used to access registers + "extal" The esai baud clock for esai controller used to derive + HCK, SCK and FS. + "fsys" The system clock derived from ahb clock used to derive + HCK, SCK and FS. + + - fsl,fifo-depth: The number of elements in the transmit and receive FIFOs. + This number is the maximum allowed value for TFCR[TFWM] or RFCR[RFWM]. + + - fsl,esai-synchronous: This is a boolean property. If present, indicating + that ESAI would work in the synchronous mode, which means all the settings + for Receiving would be duplicated from Transmition related registers. + +Example: + +esai: esai@02024000 { + compatible = "fsl,imx35-esai"; + reg = <0x02024000 0x4000>; + interrupts = <0 51 0x04>; + clocks = <&clks 208>, <&clks 118>, <&clks 208>; + clock-names = "core", "extal", "fsys"; + dmas = <&sdma 23 21 0>, <&sdma 24 21 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <128>; + fsl,esai-synchronous; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/sound/fsl,ssi.txt b/Documentation/devicetree/bindings/sound/fsl,ssi.txt index 4303b6a..b93e9a9 100644 --- a/Documentation/devicetree/bindings/sound/fsl,ssi.txt +++ b/Documentation/devicetree/bindings/sound/fsl,ssi.txt @@ -4,7 +4,12 @@ The SSI is a serial device that communicates with audio codecs. It can be programmed in AC97, I2S, left-justified, or right-justified modes. Required properties: -- compatible: Compatible list, contains "fsl,ssi". +- compatible: Compatible list, should contain one of the following + compatibles: + fsl,mpc8610-ssi + fsl,imx51-ssi + fsl,imx35-ssi + fsl,imx21-ssi - cell-index: The SSI, <0> = SSI1, <1> = SSI2, and so on. - reg: Offset and length of the register set for the device. - interrupts: <a b> where a is the interrupt number and b is a diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt new file mode 100644 index 0000000..98611a6 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -0,0 +1,40 @@ +Freescale Synchronous Audio Interface (SAI). + +The SAI is based on I2S module that used communicating with audio codecs, +which provides a synchronous audio interface that supports fullduplex +serial interfaces with frame synchronization such as I2S, AC97, TDM, and +codec/DSP interfaces. + + +Required properties: +- compatible: Compatible list, contains "fsl,vf610-sai". +- reg: Offset and length of the register set for the device. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names : Must include the "sai" entry. +- dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. +- dma-names : Two dmas have to be defined, "tx" and "rx". +- pinctrl-names: Must contain a "default" entry. +- pinctrl-NNN: One property must exist for each entry in pinctrl-names. + See ../pinctrl/pinctrl-bindings.txt for details of the property values. +- big-endian-regs: If this property is absent, the little endian mode will + be in use as default, or the big endian mode will be in use for all the + device registers. +- big-endian-data: If this property is absent, the little endian mode will + be in use as default, or the big endian mode will be in use for all the + fifo data. + +Example: +sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai2_1>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 VF610_EDMA_MUXID0_SAI2_TX>, + <&edma0 0 VF610_EDMA_MUXID0_SAI2_RX>; + big-endian-regs; + big-endian-data; +}; diff --git a/Documentation/devicetree/bindings/sound/hdmi.txt b/Documentation/devicetree/bindings/sound/hdmi.txt new file mode 100644 index 0000000..31af7bc --- /dev/null +++ b/Documentation/devicetree/bindings/sound/hdmi.txt @@ -0,0 +1,17 @@ +Device-Tree bindings for dummy HDMI codec + +Required properties: + - compatible: should be "linux,hdmi-audio". + +CODEC output pins: + * TX + +CODEC input pins: + * RX + +Example node: + + hdmi_audio: hdmi_audio@0 { + compatible = "linux,hdmi-audio"; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt new file mode 100644 index 0000000..e4c8b36 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/max98090.txt @@ -0,0 +1,43 @@ +MAX98090 audio CODEC + +This device supports I2C only. + +Required properties: + +- compatible : "maxim,max98090". + +- reg : The I2C address of the device. + +- interrupts : The CODEC's interrupt output. + +Pins on the device (for linking into audio routes): + + * MIC1 + * MIC2 + * DMICL + * DMICR + * IN1 + * IN2 + * IN3 + * IN4 + * IN5 + * IN6 + * IN12 + * IN34 + * IN56 + * HPL + * HPR + * SPKL + * SPKR + * RCVL + * RCVR + * MICBIAS + +Example: + +audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt new file mode 100644 index 0000000..9c7c55c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-max98090.txt @@ -0,0 +1,51 @@ +NVIDIA Tegra audio complex, with MAX98090 CODEC + +Required properties: +- compatible : "nvidia,tegra-audio-max98090" +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names : Must include the following entries: + - pll_a + - pll_a_out0 + - mclk (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk) +- nvidia,model : The user-visible name of this sound complex. +- nvidia,audio-routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. Valid names for sources and + sinks are the MAX98090's pins (as documented in its binding), and the jacks + on the board: + + * Headphones + * Speakers + * Mic Jack + +- nvidia,i2s-controller : The phandle of the Tegra I2S controller that's + connected to the CODEC. +- nvidia,audio-codec : The phandle of the MAX98090 audio codec. + +Optional properties: +- nvidia,hp-det-gpios : The GPIO that detect headphones are plugged in + +Example: + +sound { + compatible = "nvidia,tegra-audio-max98090-venice2", + "nvidia,tegra-audio-max98090"; + nvidia,model = "NVIDIA Tegra Venice2"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; +}; diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt new file mode 100644 index 0000000..e9e20ec --- /dev/null +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -0,0 +1,77 @@ +Simple-Card: + +Simple-Card specifies audio DAI connection of SoC <-> codec. + +Required properties: + +- compatible : "simple-audio-card" + +Optional properties: + +- simple-audio-card,format : CPU/CODEC common audio format. + "i2s", "right_j", "left_j" , "dsp_a" + "dsp_b", "ac97", "pdm", "msb", "lsb" +- simple-audio-card,routing : A list of the connections between audio components. + Each entry is a pair of strings, the first being the + connection's sink, the second being the connection's + source. + +Required subnodes: + +- simple-audio-card,cpu : CPU sub-node +- simple-audio-card,codec : CODEC sub-node + +Required CPU/CODEC subnodes properties: + +- sound-dai : phandle and port of CPU/CODEC + +Optional CPU/CODEC subnodes properties: + +- format : CPU/CODEC specific audio format if needed. + see simple-audio-card,format +- frame-master : bool property. add this if subnode is frame master +- bitclock-master : bool property. add this if subnode is bitclock master +- bitclock-inversion : bool property. add this if subnode has clock inversion +- frame-inversion : bool property. add this if subnode has frame inversion +- clocks / system-clock-frequency : specify subnode's clock if needed. + it can be specified via "clocks" if system has + clock node (= common clock), or "system-clock-frequency" + (if system doens't support common clock) + +Example: + +sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "left_j"; + simple-audio-routing = + "MIC_IN", "Mic Jack", + "Headphone Jack", "HP_OUT", + "Ext Spk", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + + simple-audio-card,codec { + sound-dai = <&ak4648>; + bitclock-master; + frame-master; + clocks = <&osc>; + }; +}; + +&i2c0 { + ak4648: ak4648@12 { + #sound-dai-cells = <0>; + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + }; +}; + +sh_fsi2: sh_fsi2@ec230000 { + #sound-dai-cells = <1>; + compatible = "renesas,sh_fsi2"; + reg = <0xec230000 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 146 0x4>; +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index 5e6040c..9d8ea14 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -6,6 +6,7 @@ Required properties: - compatible - "string" - One of: "ti,tlv320aic3x" - Generic TLV320AIC3x device + "ti,tlv320aic32x4" - TLV320AIC32x4 "ti,tlv320aic33" - TLV320AIC33 "ti,tlv320aic3007" - TLV320AIC3007 "ti,tlv320aic3106" - TLV320AIC3106 diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt deleted file mode 100644 index 1a1b7cf..0000000 --- a/Documentation/devicetree/bindings/staging/dwc2.txt +++ /dev/null @@ -1,15 +0,0 @@ -Platform DesignWare HS OTG USB 2.0 controller ------------------------------------------------------ - -Required properties: -- compatible : "snps,dwc2" -- reg : Should contain 1 register range (address and length) -- interrupts : Should contain 1 interrupt - -Example: - - usb@101c0000 { - compatible = "ralink,rt3050-usb, snps,dwc2"; - reg = <0x101c0000 40000>; - interrupts = <18>; - }; diff --git a/Documentation/devicetree/bindings/staging/xillybus.txt b/Documentation/devicetree/bindings/staging/xillybus.txt new file mode 100644 index 0000000..9e316dc --- /dev/null +++ b/Documentation/devicetree/bindings/staging/xillybus.txt @@ -0,0 +1,20 @@ +* Xillybus driver for generic FPGA interface + +Required properties: +- compatible: Should be "xillybus,xillybus-1.00.a" +- reg: Address and length of the register set for the device +- interrupts: Contains one interrupt node, typically consisting of three cells. +- interrupt-parent: the phandle for the interrupt controller that + services interrupts for this device. + +Optional properties: +- dma-coherent: Present if DMA operations are coherent + +Example: + + xillybus@ff200400 { + compatible = "xillybus,xillybus-1.00.a"; + reg = < 0xff200400 0x00000080 >; + interrupts = < 0 40 1 >; + interrupt-parent = <&intc>; + } ; diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt new file mode 100644 index 0000000..7c26154 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -0,0 +1,22 @@ +Allwinner SoCs High Speed Timer Controller + +Required properties: + +- compatible : should be "allwinner,sun5i-a13-hstimer" or + "allwinner,sun7i-a20-hstimer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupts of these timers (2 for the sun5i IP, 4 for the sun7i + one) +- clocks: phandle to the source clock (usually the AHB clock) + +Example: + +timer@01c60000 { + compatible = "allwinner,sun7i-a20-hstimer"; + reg = <0x01c60000 0x1000>; + interrupts = <0 51 1>, + <0 52 1>, + <0 53 1>, + <0 54 1>; + clocks = <&ahb1_gates 19>; +}; diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt index b4b5b79..b4b5b79 100644 --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt new file mode 100644 index 0000000..b8b6871 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -0,0 +1,29 @@ +Platform DesignWare HS OTG USB 2.0 controller +----------------------------------------------------- + +Required properties: +- compatible : One of: + - brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC. + - snps,dwc2: A generic DWC2 USB controller with default parameters. +- reg : Should contain 1 register range (address and length) +- interrupts : Should contain 1 interrupt +- clocks: clock provider specifier +- clock-names: shall be "otg" +Refer to clk/clock-bindings.txt for generic clock consumer properties + +Optional properties: +- phys: phy provider specifier +- phy-names: shall be "device" +Refer to phy/phy-bindings.txt for generic phy consumer properties + +Example: + + usb@101c0000 { + compatible = "ralink,rt3050-usb, snps,dwc2"; + reg = <0x101c0000 40000>; + interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + }; diff --git a/Documentation/devicetree/bindings/usb/gr-udc.txt b/Documentation/devicetree/bindings/usb/gr-udc.txt new file mode 100644 index 0000000..0c5118f --- /dev/null +++ b/Documentation/devicetree/bindings/usb/gr-udc.txt @@ -0,0 +1,28 @@ +USB Peripheral Controller driver for Aeroflex Gaisler GRUSBDC. + +The GRUSBDC USB Device Controller core is available in the GRLIB VHDL +IP core library. + +Note: In the ordinary environment for the core, a Leon SPARC system, +these properties are built from information in the AMBA plug&play. + +Required properties: + +- name : Should be "GAISLER_USBDC" or "01_021" + +- reg : Address and length of the register set for the device + +- interrupts : Interrupt numbers for this device + +Optional properties: + +- epobufsizes : An array of buffer sizes for OUT endpoints. If the property is + not present, or for endpoints outside of the array, 1024 is assumed by + the driver. + +- epibufsizes : An array of buffer sizes for IN endpoints. If the property is + not present, or for endpoints outside of the array, 1024 is assumed by + the driver. + +For further information look in the documentation for the GLIB IP core library: +http://www.gaisler.com/products/grlib/grip.pdf diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 090e5e2..c495135 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -87,6 +87,8 @@ Required properties: e.g. USB3 PHY and SATA PHY on OMAP5. "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on DRA7 platform. + "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on + AM437 platform. - reg : Address and length of the register set for the device. It contains the address of "otghs_control" for control-phy-otghs or "power" register for other types. diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index edbb8d8..f29cd78 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -9,6 +9,7 @@ aeroflexgaisler Aeroflex Gaisler AB ak Asahi Kasei Corp. altr Altera Corp. amcc Applied Micro Circuits Corporation (APM, formally AMCC) +amstaos AMS-Taos Inc. apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. atmel Atmel Corporation |