diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
36 files changed, 44 insertions, 44 deletions
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index 7364953..45ac19b 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -31,10 +31,10 @@ This binding uses the common clock binding[1]. Each subnode should use the binding described in [2]..[7] [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt -[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt -[7] Documentation/devicetree/bindings/clock/st,quadfs.txt -[8] Documentation/devicetree/bindings/clock/st,flexgen.txt +[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt +[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt +[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt +[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt index 03f8fde..56d603c 100644 --- a/Documentation/devicetree/bindings/clock/ti/gate.txt +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for that is used. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt [3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt Required properties: diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt index 3111a40..3f47040 100644 --- a/Documentation/devicetree/bindings/clock/ti/interface.txt +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate clock) and hardware autoidle enable / disable. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt Required properties: - compatible : shall be one of: diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt index d36f07e..0551c78 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt @@ -8,7 +8,7 @@ Required properties: "intermediate" - A parent of "cpu" clock which is used as "intermediate" clock source (usually MAINPLL) when the original CPU PLL is under transition and not stable yet. - Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for + Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for generic clock consumer properties. - operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt for detail. diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt index d6d2833..fc2bcbe 100644 --- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt +++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt @@ -12,7 +12,7 @@ Required properties: - clocks: Phandles for clock specified in "clock-names" property - clock-names : The name of clock used by the DFI, must be "pclk_ddr_mon"; -- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt for details. - center-supply: DMC supply node. - status: Marks the node enabled/disabled. diff --git a/Documentation/devicetree/bindings/display/bridge/tda998x.txt b/Documentation/devicetree/bindings/display/bridge/tda998x.txt index 1a4eaca..f5a02f6 100644 --- a/Documentation/devicetree/bindings/display/bridge/tda998x.txt +++ b/Documentation/devicetree/bindings/display/bridge/tda998x.txt @@ -30,7 +30,7 @@ Optional properties: - nxp,calib-gpios: calibration GPIO, which must correspond with the gpio used for the TDA998x interrupt pin. -[1] Documentation/sound/alsa/soc/DAI.txt +[1] Documentation/sound/soc/dai.rst [2] include/dt-bindings/display/tda998x.h Example: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt index 039219d..18a2cde 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.txt @@ -34,7 +34,7 @@ Optional properties: - mali-supply : Phandle to regulator for the Mali device. Refer to Documentation/devicetree/bindings/regulator/regulator.txt for details. -- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt +- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt for details. diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index c1f65d1..63cd911 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -44,7 +44,7 @@ Optional properties: - memory-region: Memory region to allocate from, as defined in - Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt - mali-supply: Phandle to regulator for the Mali device, as defined in diff --git a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt index f2c30c8..9afffbd 100644 --- a/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt +++ b/Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt @@ -12,7 +12,7 @@ Additional documentation for F11 can be found at: http://www.synaptics.com/sites/default/files/511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf Optional Touch Properties: -Description in Documentation/devicetree/bindings/input/touch +Description in Documentation/devicetree/bindings/input/touchscreen - touchscreen-inverted-x - touchscreen-inverted-y - touchscreen-swapped-x-y diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt index f99fe5c..a644408 100644 --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt +++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt @@ -28,7 +28,7 @@ Deprecated properties: This property is deprecated. Instead, a 'steps-per-period ' value should be used, such as "rotary-encoder,steps-per-period = <2>". -See Documentation/input/rotary-encoder.txt for more information. +See Documentation/input/devices/rotary-encoder.rst for more information. Example: diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index c7888d6..880d4d7 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -28,7 +28,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num) must be defined for each tsin child node. - pinctrl-0 : phandle referencing pin configuration for this tsin configuration -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Required properties (tsin (child) node): diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index 0b2a609..5297b22 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -46,7 +46,7 @@ is required: Following properties are require if pin control setting is required at boot. - pinctrl-names: A pinctrl state named "default" be defined, using the - bindings in pinctrl/pinctrl-binding.txt. + bindings in pinctrl/pinctrl-bindings.txt. - pinctrl[0...n]: Properties to contain the phandle that refer to different nodes of pin control settings. These nodes represents the pin control setting of state 0 to state n. Each of these diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt index d1df77f..0ebd08a 100644 --- a/Documentation/devicetree/bindings/mfd/mt6397.txt +++ b/Documentation/devicetree/bindings/mfd/mt6397.txt @@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -Documentation/devicetree/bindings/soc/pwrap.txt +Documentation/devicetree/bindings/soc/mediatek/pwrap.txt This document describes the binding for MFD device and its sub module. diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index dd2c065..daa091c 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -8,8 +8,8 @@ Required properties: - reg: The PRCM registers range The prcm node may contain several subdevices definitions: - - see Documentation/devicetree/clk/sunxi.txt for clock devices - - see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset + - see Documentation/devicetree/bindings/clock/sunxi.txt for clock devices + - see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset controller devices diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index a58c173..0419a63 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host) rest of the gpios (depending on the bus-width property) are the data lines in no particular order. The format of the gpio specifier depends on the gpio controller. -(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt) +(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) Example: diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt index 3149297..f064528 100644 --- a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt +++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt @@ -12,7 +12,7 @@ Required properties: See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the SDHCI controller. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index 6b3d40c..ccf82b4 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -20,7 +20,7 @@ Required properties: - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - reg: This must provide the host controller base address and it can also contain the FlashSS Top register for TX/RX delay used by the driver diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt b/Documentation/devicetree/bindings/net/dsa/ksz.txt index fd23904..a700943 100644 --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt @@ -6,7 +6,7 @@ Required properties: - compatible: For external switch chips, compatible string must be exactly one of: "microchip,ksz9477" -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required and optional properties. Examples: diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt index a9bc27b..aa3527f 100644 --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt @@ -31,7 +31,7 @@ Required properties for the child nodes within ports container: - phy-mode: String, must be either "trgmii" or "rgmii" for port labeled "cpu". -See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional +See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional required, optional properties and how the integrated switch subnodes must be specified. diff --git a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt index d5e22fc..0df79d9 100644 --- a/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt +++ b/Documentation/devicetree/bindings/nvmem/zii,rave-sp-eeprom.txt @@ -18,7 +18,7 @@ Optional properties: Data cells: Data cells are child nodes of eerpom node, bindings for which are -documented in Documentation/bindings/nvmem/nvmem.txt +documented in Documentation/devicetree/bindings/nvmem/nvmem.txt Example: diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index 7bf9df0..0dcb87d 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -3,7 +3,7 @@ HiSilicon Hip05 and Hip06 PCIe host bridge DT description HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/pci/kirin-pcie.txt b/Documentation/devicetree/bindings/pci/kirin-pcie.txt index 6e217c6..6bbe438 100644 --- a/Documentation/devicetree/bindings/pci/kirin-pcie.txt +++ b/Documentation/devicetree/bindings/pci/kirin-pcie.txt @@ -3,7 +3,7 @@ HiSilicon Kirin SoCs PCIe host DT description Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt. +Documentation/devicetree/bindings/pci/designware-pcie.txt. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/pci/pci-keystone.txt b/Documentation/devicetree/bindings/pci/pci-keystone.txt index 7e05487..3d4a209 100644 --- a/Documentation/devicetree/bindings/pci/pci-keystone.txt +++ b/Documentation/devicetree/bindings/pci/pci-keystone.txt @@ -3,9 +3,9 @@ TI Keystone PCIe interface Keystone PCI host Controller is based on the Synopsys DesignWare PCI hardware version 3.65. It shares common functions with the PCIe DesignWare core driver and inherits common properties defined in -Documentation/devicetree/bindings/pci/designware-pci.txt +Documentation/devicetree/bindings/pci/designware-pcie.txt -Please refer to Documentation/devicetree/bindings/pci/designware-pci.txt +Please refer to Documentation/devicetree/bindings/pci/designware-pcie.txt for the details of DesignWare DT bindings. Additional properties are described here as well as properties that are not applicable. diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt index ad4fce3..511fc23 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt @@ -11,9 +11,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index a677145..625a22e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -101,9 +101,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt index eee3dc2..cbcbd31 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt @@ -10,9 +10,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties: diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index b31d6bb..726ec28 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -14,7 +14,7 @@ Required properties: datasheet - interrupts: Should contain one interrupt specifier for the GPC interrupt - clocks: Must contain an entry for each entry in clock-names. - See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details. + See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - clock-names: Must include the following entries: - ipg diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt index 0ba1bcc..f181e46 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/btemp.txt @@ -13,4 +13,4 @@ Required Properties: }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt index ef53283..56636f9 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/chargalg.txt @@ -13,4 +13,4 @@ ab8500_chargalg { }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt index 6bdbb08..24ada03e 100644 --- a/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt +++ b/Documentation/devicetree/bindings/power/supply/ab8500/charger.txt @@ -22,4 +22,4 @@ Required Properties: }; For information on battery specific node, Ref: -Documentation/devicetree/bindings/power_supply/ab8500/fg.txt +Documentation/devicetree/bindings/power/supply/ab8500/fg.txt diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt index 5d254ab..cfd7465 100644 --- a/Documentation/devicetree/bindings/power/wakeup-source.txt +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt @@ -22,7 +22,7 @@ List of legacy properties and respective binding document 3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt 4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt Documentation/devicetree/bindings/mfd/tc3589x.txt - Documentation/devicetree/bindings/input/ads7846.txt + Documentation/devicetree/bindings/input/touchscreen/ads7846.txt 5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt 6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt 7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt index 7a34345..c8dd440 100644 --- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt +++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt @@ -8,7 +8,7 @@ Required properties: See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the UART peripheral. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Optional properties: - cts-gpios: CTS pin for UART diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt index 4bda520..58c3413 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt @@ -18,7 +18,7 @@ Required properties: See Documentation/devicetree/bindings/dma/stm32-dma.txt. - dma-names: Identifier for each DMA request line. Must be "tx" and "rx". - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt Optional properties: - resets: Reference to a reset controller asserting the reset controller diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index f301cdf..3a3fc50 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -37,7 +37,7 @@ SAI subnodes required properties: "tx": if sai sub-block is configured as playback DAI "rx": if sai sub-block is configured as capture DAI - pinctrl-names: should contain only value "default" - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/pinctrl-stm32.txt + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt SAI subnodes Optional properties: - st,sync: specify synchronization mode. diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt index fe54959..1bdc470 100644 --- a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt +++ b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt @@ -9,7 +9,7 @@ Required properties: - clocks : Must contain an entry for each name in clock-names See ../clk/* - pinctrl-names : Uses "default", can use "sleep" if provided - See ../pinctrl/pinctrl-binding.txt + See ../pinctrl/pinctrl-bindings.txt Optional properties: - cs-gpios : List of GPIO chip selects diff --git a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt index 50a3153..252a05c 100644 --- a/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt +++ b/Documentation/devicetree/bindings/usb/rockchip,dwc3.txt @@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of the node is not important. The content of the node is defined in dwc3.txt. Phy documentation is provided in the following places: -Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt +Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt Example device nodes: |