summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/sound/samsung-i2s.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/sound/samsung-i2s.txt')
-rw-r--r--Documentation/devicetree/bindings/sound/samsung-i2s.txt22
1 files changed, 10 insertions, 12 deletions
diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
index 025e66b..7386d44 100644
--- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt
@@ -2,7 +2,15 @@
Required SoC Specific Properties:
-- compatible : "samsung,i2s-v5"
+- compatible : should be one of the following.
+ - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S.
+ - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with
+ secondary fifo, s/w reset control and internal mux for root clk src.
+ - samsung,exynos5420-i2s: for 8/16/24bit multichannel(7.1) I2S with
+ secondary fifo, s/w reset control, internal mux for root clk src and
+ TDM support. TDM (Time division multiplexing) is to allow transfer of
+ multiple channel audio data on single data line.
+
- reg: physical base address of the controller and length of memory mapped
region.
- dmas: list of DMA controller phandle and DMA request line ordered pairs.
@@ -21,13 +29,6 @@ Required SoC Specific Properties:
Optional SoC Specific Properties:
-- samsung,supports-6ch: If the I2S Primary sound source has 5.1 Channel
- support, this flag is enabled.
-- samsung,supports-rstclr: This flag should be set if I2S software reset bit
- control is required. When this flag is set I2S software reset bit will be
- enabled or disabled based on need.
-- samsung,supports-secdai:If I2S block has a secondary FIFO and internal DMA,
- then this flag is enabled.
- samsung,idma-addr: Internal DMA register base address of the audio
sub system(used in secondary sound source).
- pinctrl-0: Should specify pin control groups used for this controller.
@@ -36,7 +37,7 @@ Optional SoC Specific Properties:
Example:
i2s0: i2s@03830000 {
- compatible = "samsung,i2s-v5";
+ compatible = "samsung,s5pv210-i2s";
reg = <0x03830000 0x100>;
dmas = <&pdma0 10
&pdma0 9
@@ -46,9 +47,6 @@ i2s0: i2s@03830000 {
<&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
- samsung,supports-6ch;
- samsung,supports-rstclr;
- samsung,supports-secdai;
samsung,idma-addr = <0x03000000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
OpenPOWER on IntegriCloud