summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt')
-rw-r--r--Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt19
1 files changed, 18 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
index 0bda229..3899d6a 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt
@@ -1,5 +1,20 @@
Freescale FlexTimer Module (FTM) PWM controller
+The same FTM PWM device can have a different endianness on different SoCs. The
+device tree provides a property to describing this so that an operating system
+device driver can handle all variants of the device. Refer to the table below
+for the endianness of the FTM PWM block as integrated into the existing SoCs:
+
+ SoC | FTM-PWM endianness
+ --------+-------------------
+ Vybrid | LE
+ LS1 | BE
+ LS2 | LE
+
+Please see ../regmap/regmap.txt for more detail about how to specify endian
+modes in device tree.
+
+
Required properties:
- compatible: Should be "fsl,vf610-ftm-pwm".
- reg: Physical base address and length of the controller's registers
@@ -16,7 +31,8 @@ Required properties:
- pinctrl-names: Must contain a "default" entry.
- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
See pinctrl/pinctrl-bindings.txt for details of the property values.
-
+- big-endian: Boolean property, required if the FTM PWM registers use a big-
+ endian rather than little-endian layout.
Example:
@@ -32,4 +48,5 @@ pwm0: pwm@40038000 {
<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_1>;
+ big-endian;
};
OpenPOWER on IntegriCloud