diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mtd')
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt | 24 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mtd/tango-nand.txt | 6 |
2 files changed, 27 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt new file mode 100644 index 0000000..3fa1b34 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt @@ -0,0 +1,24 @@ +Flash device on Cortina Systems Gemini SoC + +This flash is regular CFI compatible (Intel or AMD extended) flash chips with +some special bits that can be controlled by the machine's system controller. + +Required properties: +- compatible : must be "cortina,gemini-flash", "cfi-flash"; +- reg : memory address for the flash chip +- syscon : must be a phandle to the system controller +- bank-width : width in bytes of flash interface, should be <2> + +For the rest of the properties, see mtd-physmap.txt. + +The device tree may optionally contain sub-nodes describing partitions of the +address space. See partition.txt for more detail. + +Example: + +flash@30000000 { + compatible = "cortina,gemini-flash", "cfi-flash"; + reg = <0x30000000 0x01000000>; + syscon = <&syscon>; + bank-width = <2>; +}; diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt index ad5a02f..cd1bf2a 100644 --- a/Documentation/devicetree/bindings/mtd/tango-nand.txt +++ b/Documentation/devicetree/bindings/mtd/tango-nand.txt @@ -5,7 +5,7 @@ Required properties: - compatible: "sigma,smp8758-nand" - reg: address/size of nfc_reg, nfc_mem, and pbus_reg - dmas: reference to the DMA channel used by the controller -- dma-names: "nfc_sbox" +- dma-names: "rxtx" - clocks: reference to the system clock - #address-cells: <1> - #size-cells: <0> @@ -17,9 +17,9 @@ Example: nandc: nand-controller@2c000 { compatible = "sigma,smp8758-nand"; - reg = <0x2c000 0x30 0x2d000 0x800 0x20000 0x1000>; + reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>; dmas = <&dma0 3>; - dma-names = "nfc_sbox"; + dma-names = "rxtx"; clocks = <&clkgen SYS_CLK>; #address-cells = <1>; #size-cells = <0>; |
